Incorporation Of Catalytic Dehydrogenation Into Fischer-Tropsch Synthesis To Lower Carbon Dioxide Emissions,
2012
University of Kentucky
Incorporation Of Catalytic Dehydrogenation Into Fischer-Tropsch Synthesis To Lower Carbon Dioxide Emissions, Gerald P. Huffman
Chemical and Materials Engineering Faculty Patents
A method for producing liquid fuels includes the steps of gasifying a starting material selected from a group consisting of coal, biomass, carbon nanotubes and mixtures thereof to produce a syngas, subjecting that syngas to Fischer-Tropsch synthesis (FTS) to produce a hyrdrocarbon product stream, separating that hydrocarbon product stream into C1-C4 hydrocarbons and C5+ hydrocarbons to be used as liquid fuels and subjecting the C1-C4 hydrocarbons to catalytic dehydrogenation (CDH) to produce hydrogen and carbon nanotubes. The hydrogen produced by CDH is recycled to be mixed with the syngas incident to the FTS reactor in order to raise the hydrogen …
Nanostructured Dielectric Materials For High Energy Density Multi Layer Ceramic Capacitors,
2012
Missouri University of Science and Technology
Nanostructured Dielectric Materials For High Energy Density Multi Layer Ceramic Capacitors, Fatih Dogan
Materials Science and Engineering Faculty Research & Creative Works
A high energy density multilayer ceramic capacitor, having at least two electrode layers and at least one substantially dense polycrystalline dielectric layer positioned therebetween. The at polycrystalline dielectric layer has an average grain size of less than about 300 nanometers, a particle size distribution of between about 150 nanometers and about 3 micrometers, and a maximum porosity of about 1 percent. The dielectric layer is selected from the group including TiO2, BaTiO3, Al2O3, ZrO2, lead zirconium titanate, and combinations thereof and has a breakdown strength of at least about 1100 …
Molecular Dynamics Simulations Of Oscillatory Couette Flows With Slip Boundary Conditions,
2012
Wright State University - Main Campus
Molecular Dynamics Simulations Of Oscillatory Couette Flows With Slip Boundary Conditions, Nikolai V. Priezjev
Mechanical and Materials Engineering Faculty Publications
The effect of interfacial slip on steady-state and time-periodic flows of monatomic liquids is investigated using non-equilibrium molecular dynamics simulations. The fluid phase is confined between atomically smooth rigid walls, and the fluid flows are induced by moving one of the walls. In steady shear flows, the slip length increases almost linearly with shear rate. We found that the velocity profiles in oscillatory flows are well described by the Stokes flow solution with the slip length that depends on the local shear rate. Interestingly, the rate dependence of the slip length obtained in steady shear flows is recovered when the …
Water Modeling Of Self-Braking Submerged Entry Nozzle Used For Steel Continuous Casting Mold,
2012
Missouri University of Science and Technology
Water Modeling Of Self-Braking Submerged Entry Nozzle Used For Steel Continuous Casting Mold, Yongfeng Chen, Lifeng Zhang, Shufeng Yang, Jingshe Li
Materials Science and Engineering Faculty Research & Creative Works
Slag entrainment in a continuous casting mold is one of the major causes of macro nonmetallic inclusions in continuous casting steel products. Stabilizing the level fluctuation is an important factor to improve steel quality. a new type of submerged entry nozzle (SEN) named self-braking SEN was designed. in the current study, water modeling experiments were performed to study the effect of self-braking SEN on level fluctuation in a continuous casting slab mold. the level position and the root mean square value of level fluctuation were analyzed through the online detection data. the results showed that the flow in the mold …
Carbon Nanotubes With Ni2P Nanoparticles As A Counter Electrode In Dye-Sensitized Solar Cells,
2012
Institute of New Energy Material Chemistry, Nankai University, Tianjin 300071, China
Carbon Nanotubes With Ni2P Nanoparticles As A Counter Electrode In Dye-Sensitized Solar Cells, Yan-Ye Dou, Nan-Fu Yan, Guo-Ran Li, Xue-Ping Gao
Journal of Electrochemistry
Carbon nanotubes (CNTs) supported by Ni2P nanoparticles are prepared and used as a counter electrode in dye-sensitized solar cells (DSSCs) for the first time. The CNTs-Ni2P composite was prepared by the heat treatment of a mixed precursor including nickel chloride, sodium hypophosphite and CNTs in argon atmosphere. The X-Ray diffraction (XRD) results indicate that the as-prepared sample consists of hexagonal Ni2P and carbon nanotubes. No peaks of other nickel phosphides are observed in the XRD pattern. Microstructure of the Ni2P-CNTs composite was investigated using transmission electron microscopy (TEM). It is shown that the Ni …
Influences Of Particle Size And Sulfuric Acid Treatment On The Electrochemical Performance Of Bamboo Charcoal,
2012
Department of Chemistry, Institute of New Energy, Shanghai Key Laboratory of Molecular Catalysisand Innovative Materials, Fudan University, Shanghai 200438, China
Influences Of Particle Size And Sulfuric Acid Treatment On The Electrochemical Performance Of Bamboo Charcoal, Yu Yao, Ai-Shui Yu
Journal of Electrochemistry
The bamboo charcoal had been milled and treated by sulfuric acid. The influences of as-prepared material particle size and sulfuric acid treatment on the electrochemical performance had been studied. The result displays that the bamboo charcoal with mean particle size about 5 μm has the best first coulombic efficiency. Sulfuric acid treatment could raise the discharge capacity of bamboo charcoal, and the first discharge capacity of 328.2 mAh·g-1 was obtained with the bamboo charcoal treated by sulfuric acid for 18 h. Furthermore, the capacity of 302.3 mAh·g-1 could be maintained for 50 cycles, showing good cycle performance.
Preparation And Performance Of Sn-Co-M-C（M = Zn, Fe）Composites As An Anode Material,
2012
Institute of Chemical Power Sources, Soochow University, Suzhou 215006, Jiangsu, China
Preparation And Performance Of Sn-Co-M-C（M = Zn, Fe）Composites As An Anode Material, Guo-Qing Fang, Wei-Wei Liu, Shi-Ci He, Qian Zhang, Jun-Wei Zheng, De-Cheng Li
Journal of Electrochemistry
The anode materials of Sn-Co-M-C (M = Zn, Fe) composites were prepared by carbothermal reduction method from metal oxides and sucrose in N2 atmosphere. Their structural and electrochemical properties were studied by XRD, SEM and charge-discharge test. Among them, the Sn-Co-Zn-C composite showed higher specific capacity and good cycle performance. The initial specific discharge capacity of 571 mAh·g-1 could be obtained, while 369 mAh·g-1 was still kept after 45 cycles.
Preparation And Modification Of Li4Ti5O12 As Anode Materials For Lithium-Ion Batteries,
2012
Institute of Chemical Power Sources &Materials, College of Chemistry and Chemical Engineering Central South University, Changsha 410083, China
Preparation And Modification Of Li4Ti5O12 As Anode Materials For Lithium-Ion Batteries, Jin-Long Liu, Zhou-Guang Lu, Yang Ren, Ya-Jie Zhu, Shan-Shan Hu, Zhong Peng, Dong Qian, You-Gen Tang
Journal of Electrochemistry
Anode Material Li4Ti5O12 for lithium-ion batteries was successfully prepared using half-solid-state method. Furthermore, carbon coating modification of Li4Ti5O12 was also carried out. The phase structure and morphology were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The electrochemical properties were investigated by constant current discharge-charge tests, cyclic voltammetry and electrochemical impedance techniques. The results indicated that the electrochemical performance of Li4Ti5O12 without modification declined seriously due to the aggregation of Li4Ti …
Electrochemical Corrosion And Protection Of Copper Foil Treated By Surface Siloxane Filming,
2012
Department of Chemistry, Nanchang University, Nanchang 330031, China
Electrochemical Corrosion And Protection Of Copper Foil Treated By Surface Siloxane Filming, Wei-Jun Miao, Yu-Bao Zhang, Ning-Yu Gu, Feng Liu
Journal of Electrochemistry
Copper foil specimens were immersed in hydro-alcoholic solution of 3-amino-propyl-trimethoxy-silane (γ-APS) to prepare a protective self-assembled siloxane membrane on the surface. Potentiodynamic polarization and electrochemical impedance spectroscopic tests were performed in 0.1 mol.L-1 NaCl to evaluate the effects of the self-assembled siloxane membranes prepared at different pH of γ-APS on corrosion of copper foil. The surface morphology of siloxane membrane was studied by SEM. Experimental results revealed that the γ-APS self-assembled siloxane membranes effectively inhibited the corrosion of copper foil and the optimum anti-corrosion effect was found when the pH value of the silane solution was 7.
Electrochemical Immunosensor Based On Polycalconcarboxylic Acid Modified Electrode For The Determination Of Alpha-Fetoprotein,
2012
Department of Pharmaceutical Analysis, Faculty of Pharmacy, Fujian Medical University, Fuzhou 350004, China;
Electrochemical Immunosensor Based On Polycalconcarboxylic Acid Modified Electrode For The Determination Of Alpha-Fetoprotein, Xiao Lin, Shao-Huang Weng, Jian-Zhang Zhou, Ai-Lin Liu, Xin-Hua Lin, Yong-Ji You
Journal of Electrochemistry
A highly sensitive electrochemical immunosensor based on novel electropolymerized polycalconcarboxylic acid modified electrode (poly-CCA/GC) has been fabricated for the detection of alpha-fetoprotein (AFP). The differences of the poly-CCA/GC electrodes before and after the immobilization of AFP antibody were characterized via scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The immobilization of antibody/antigen/antibody-HRP sandwich was formed on the poly-CCA modified electrode for the determination of special AFP concentrations. The electrochemical signals generated from the HRP which catalyzed the TMB substrate were measured. Experiment results indicated that the developed immunosensor showed a good sensitivity and precision.
Electrocatalytic Activities Of Mb/Aunps/Mwnts/Gc Electrode For Hydrogen Peroxide Reduction,
2012
Department of Pharmaceutical Analysis of the Fujian Medical University, Fuzhou 350004, China;
Electrocatalytic Activities Of Mb/Aunps/Mwnts/Gc Electrode For Hydrogen Peroxide Reduction, Zheng-Juan Huang, Hua-Ping Peng, Dai-Jun Cha, Ai-Lin Liu, Wei Chen, Xin-Hua Lin, Yong-Ji You
Journal of Electrochemistry
A novel matrix, multiwalled carbon nanotubes supported Au nanoparticles composite nanomaterial (AuNPs/MWNTs), for immobilization of protein and biosensing was designed using a simple and effective one-step in situ synthesis route. Using myoglobin (Mb) as a model, the direct electrochemistry of the immobilized proteins on the AuNPs/MWNTs composite was studied. The results showed that the AuNPs/MWNTs composite can maintain the bioactivity and facilitate the direct electrochemistry of Mb in the Mb/AuNPs/MWNTs/GC electrode. Based on the direct electron transfer of the immobilized Mb, the protein electrode exhibited excellent electrocatalytic activity to the reduction of H2O2 with a linear range …
Synthesis And Electrochemical Properties Of High-Capacity Cathode Material 0.08lico0.75Al0.25O2-0.92linio2,
2012
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology. Beijing 100029 China
Synthesis And Electrochemical Properties Of High-Capacity Cathode Material 0.08lico0.75Al0.25O2-0.92linio2, Ru-Ying Wang, Tian Qiu, Chong Mao, Wen-Sheng Yang
Journal of Electrochemistry
CoAl-LDH or Co(OH)2 coated spherical Ni(OH)2 precursors were obtained via a co-precipitation method at a constant pH. The mixtures of the precursors and LiOH·H2O were annealed at high temperature in O2 atmosphere, and then the cathode materials of 0.08LiCo0.75Al0.25O2-0.92LiNiO2, 0.08LiCoO2-0.92LiNiO2 and LiNiO2 were synthesized. Effects of the coating layer were also studied. The results showed that the 0.08LiCo0.75Al0.25O2-0.92LiNiO2 material possessed the best rate and cycle life performance. The discharging capacities at 0.1C, 0.5C and 3C were …
Electrochemical Sensing Of Guanine And Adenine Based On The Boron-Doped Carbon Nanotubes Modified Electrode,
2012
State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, China
Electrochemical Sensing Of Guanine And Adenine Based On The Boron-Doped Carbon Nanotubes Modified Electrode, Ya-Lin Xia, Chun-Yan Deng, Juan Xiang
Journal of Electrochemistry
In this work, the boron-doped carbon nanotubes (BCNTs) modified glassy carbon (GC) electrode was simply fabricated, and the electrochemical oxidation behaviors of guanine and adenine at the BCNTs/GC electrode were investigated. Compared with the bare GC and CNTs/GC electrodes, the BCNTs-modified electrode exhibited extraordinary electrocatalytic activity towards the oxidations of guanine and adenine as indicated by the obvious increase in current responses. Moreover, the peak separation between guanine and adenine was large enough for their potential recognition in mixture without any separation or pretreatment. Therefore, the simultaneous determination of guanine and adenine was successfully achieved. The BCNTs/GC electrode showed high …
Synthesis And Electrochemical Characterization Of Li3V2(Po4)3/C Cathode Material By Ball-Milling Assisted Microwave Method,
2012
School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
Synthesis And Electrochemical Characterization Of Li3V2(Po4)3/C Cathode Material By Ball-Milling Assisted Microwave Method, Zhi-Yuan Tang, Wen-Feng Mao, Ji Yan, Wei Yuan, Xin-He Zhang
Journal of Electrochemistry
The cathode materials of Li3V2(PO4)3/C were successfully synthesized by ball-milling assisted microwave method and the microwave irradiation time was also optimized. It is found that the Li3V2(PO4)3/C material obtained at a microwave power of 640 W for 18 min showed the best electrochemical performance with the initial reversible capacity of 101.3 mAh·g-1 and the remained 100.8 mAh·g-1 at 5C rate after 300 cycles. This excellent electrochemical capability may be resulted from good crystallinity, smaller and uniform particle size of the material, showing …
Naf-M (M = Fe, Cu) Nanocomposites As Conversion Cathode Materials For Sodium Ion Batteries,
2012
College of Chemistry and Molecular Science, Wuhan University, Wuhan 430072, China
Naf-M (M = Fe, Cu) Nanocomposites As Conversion Cathode Materials For Sodium Ion Batteries, Ting Li, Zhong-Xue Chen, Yu-Liang Cao, Han-Xi Yang
Journal of Electrochemistry
The NaF-M (M = Fe, Cu) nanocomposites were prepared by high-energy ball milling using TiN grinding nanoparticles and investigated as cathode materials for sodium ion batteries. The experimental results demonstrated that NaF-Fe and NaF-Cu nanocomposites can go through electrochemical conversion reaction with Na+ uptake or removal, delivering a reversible capacity of ~ 150 mAh·g-1, even through a reversed conversion from initial discharged state to a charged state. These results reveal the possibility to realize a conversion reaction as long as NaF and elemental metal particles are intimately contacted to form active nanocomposites at nanodomain, which suggests a …
Poly(Aniline/O-Nitroaniline): A High Capacity Cathode Material For Lithium Ion Batteries,
2012
College of Chemistry and Molecular Science, Wuhan University, Wuhan 430072, China;
Poly(Aniline/O-Nitroaniline): A High Capacity Cathode Material For Lithium Ion Batteries, Rui-Rui Zhao, Li-Min Zhu, Jiang-Feng Qian, Han-Xi Yang
Journal of Electrochemistry
Polyaniline can be used as a high capacity cathode material due to the advantages of material abundance and synthetic simplicity. However, its practical application in battery has been hindered by poor electrochemical utilization and cycling instability. To solve these problems, we synthesized the poly(aniline/o-Nitroaniline) (P(AN-oNA)) by introducing the electron-drawing group-nitroaniline onto the polyaniline chains, so as to enhance electrochemical utilization and stability of the polyaniline derivative. The as-prepared Li/P(AN-oNA) copolymer shows a greatly enhanced discharge capacities of 186 mAh·g-1 at initial cycles, about 37% higher than its parent PAN, and remains 168 mAh·g-1 after 60th cycle. Also, the …
Electrochemical Performance Of Yf3-Coated Li(Li0.22Ni0.17Mn0.61)O2 Cathode Material For Li-Ion Batteries,
2012
Institute of New Energy Material Chemistry, Nankai University, Tianjin 300071, China
Electrochemical Performance Of Yf3-Coated Li(Li0.22Ni0.17Mn0.61)O2 Cathode Material For Li-Ion Batteries, Xin Feng, Guo-Ran Li, Shi-Hai Ye, Xue-Ping Gao
Journal of Electrochemistry
The Li(Li0.22Ni0.17Mn0.61)O2 was prepared with oxalic co-precipitation and coated with an YF3 layer by a chemical deposition method. The as-prepared and YF3-coated Li-rich materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The results demonstrate that the as-prepared and YF3-coated Li(Li0.22Ni0.17Mn0.61)O2 materials have a typical layered structure and are composed of sphere-like particles with a diameter of 100~200 nm. Galvanostatic charge-discharge tests show that the discharge capacity of the YF3-coated Li(Li0.22 …
A Facile Approach To Prepare Lifepo4/C Composite With High-Rate Performance,
2012
State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050;
A Facile Approach To Prepare Lifepo4/C Composite With High-Rate Performance, Peng Zhang, Ling-Bin Kong, Yong-Chun Luo, Long Kang
Journal of Electrochemistry
The LiFePO4/C composite electrode material was synthesized by a moderate in situ carbothermal reduction method at 600 °C using FeCl3·6H2O, LiOH·H2O, and NH4H2PO4 as starting materials, soluble starch sol as a carbon source and a reducing agent. This method is readily reproducible and possibly feasible to carry out large-scale synthesis. The structure and morphology of the LiFePO4/C samples were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The synthesized LiFePO4/C composite was in pure phase of olivine-type, …
Electrochemical Performances Of Layered Polypyrrole/Chemically Reduced Graphene Oxide Nanocomposites As Supercapacitor Electrodes,
2012
Research Institute of Micro/Nano Science and Technology, Shanghai Jiao Tong University. Shanghai 200240,China
Electrochemical Performances Of Layered Polypyrrole/Chemically Reduced Graphene Oxide Nanocomposites As Supercapacitor Electrodes, Si-Zhe Xu, Xue-Jiao Zhou, Kun Wu, Yong-Qiang Yang, Hai-Xia Wu
Journal of Electrochemistry
Nanocomposites of polypyrrole (Ppy) and chemically reduced graphene oxide (CRGO), Ppy/CRGO, have been fabricated through in-situ polymerization of pyrrole on graphene oxide (GO) sheets. The as-synthesized Ppy/CRGO composites were characterized complementarily using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier transformed infrared spectroscopy (FT-IR). By controlling the initial ratio of the GO to pyrrole, the layered composites could be obtained and their thickness could be tuned properly. The Ppy/CRGO electrodes were prepared using a mechanical compressing technique and their electrical conductivity and electrochemical properties were characterized systematically. We demonstrated that as electrodes for supercapacitor, the Ppy/CRGO composites with Ppy …
Freeze-Form Extrusion Fabrication Of Functionally Graded Material Composites Using Zirconium Carbide And Tungsten,
2012
Missouri University of Science and Technology
Freeze-Form Extrusion Fabrication Of Functionally Graded Material Composites Using Zirconium Carbide And Tungsten, Ang Li, Aaron S. Thornton, Bradley K. Deuser, Jeremy Lee Watts, Ming-Chuan Leu, Greg Hilmas, Robert G. Landers
Materials Science and Engineering Faculty Research & Creative Works
Ultra-high-temperature ceramics are being investigated for future use in aerospace applications due to their superior thermo-mechanical properties, as well as their oxidation resistance, at temperatures above 2000⁰C. However, their brittleness makes them susceptible to thermal shock failure. As graded composites, components fabricated as functionally-graded materials (FGMs) can combine the superior properties of ceramics with the toughness of an underlying refractory metal. This paper discusses the grading of two materials through the use of a Freeze-form Extrusion Fabrication (FEF) system to build FGM parts consisting of zirconium carbide (ZrC) and tungsten (W). Aqueous-based colloidal suspensions of ZrC and W were developed …
