An Investigation Of Photocatalytic Degradation Reactions Of Pollutants By Combination Of (Photo)Electrochemical Measurements,
2013
Department of Chemistry, Zhejiang University, Hangzhou 310027, China;
An Investigation Of Photocatalytic Degradation Reactions Of Pollutants By Combination Of (Photo)Electrochemical Measurements, Wen-Hua Leng, Hong-Qiao Zhu
Journal of Electrochemistry
Semiconductor photocatalysis plays a critical role in the environment protection and future energy development. (Photo)electrochemical measurements are powerful tools for studying the kinetics and mechanism of photocatalytic reactions, since photo-carriers, as reactants of photocatalytic reactions, are involved in the interfacial transfer and recombination of semiconductor/electrolyte interface. This review describes the part of our recent results regarding aqueous photocatalytic decontamination obtained by these methods, and the focus of future work in this field is suggested.
Preparation Of Benzoquinone From Phenol By Electrooxidation,
2013
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China;
Preparation Of Benzoquinone From Phenol By Electrooxidation, Dong-Fang Niu, Cheng-Kai Yu, Xin-Sheng Zhang
Journal of Electrochemistry
The benzoquinone was prepared from phenol by electrooxidation in an H-type cell with cation exchange membrane, in which lead plates were used both as an anode and a cathode, while H2SO4 was used as a supporting electrolyte. The effects of current density, concentration of sulphuric acid, concentrations of benzoquinone in electrolyte and extractant on the yields and efficiencies of electrolysis were investigated. Under the optimized conditions of current density being 4 A·dm-2, concentration of sulphuric acid 1 mol·L-1, passed charge 3.2 A·h, the yield and current efficiency of benzoquinone could reach 68% and …
Experimental Design Methodology Applied To The Oxidation Of Quinolines In Aqueous Medium By Electro-Fenton Process,
2013
Université Paris-Est, Laboratoire Géomatériaux et Environnement (LGE), UPEMLV, 77454 Marne-la-Vallée, France;Laboratoire de Chimie Analytique et Electrochimie, Département de Chimie, Faculté des Sciences de Tunis, Campus Universitaire 2092, El Manar Tunis, Tunisia;
Experimental Design Methodology Applied To The Oxidation Of Quinolines In Aqueous Medium By Electro-Fenton Process, Souhaila Trabelsi Souissi, Nihal Oturan, Nizar Bellakhal, Mehmet A. Oturan
Journal of Electrochemistry
The degradation behavior of 8-hydroxyquinoleine sulfate (8-HQS), a model molecule of quinolines, was studied in an aqueous medium by electro-Fenton process using a carbon felt cathode and a platinum anode. The great oxidation ability of this process is due to a large production of hydroxyl radical (OH) by electrochemically induced Fenton’s reagent (H2O2, Fe2+). Hydroxyl radicals are very powerful oxidizing agents which react on organics up to complete mineralization. A factorial experimental design was used for determining the operating parameters on the degradation of 8-HQS in an aqueous medium. The results showed that the …
Basic Principles And Applications Of Secm In Metal Corrosion,
2013
Department of Chemistry, Zhejiang University, Hangzhou 310027, China;
Basic Principles And Applications Of Secm In Metal Corrosion, Fa-He Cao, Yan Xia, Wen-Juan Liu, Lin-Rong Chang, Jian-Qing Zhang
Journal of Electrochemistry
Scanning electrochemical microscopy (SECM) is chemical microscopy with higher spatial resolution. After 24 years of development, SECM has been widely applied in mapping and kinetics study of heterogeneous electron transfer in localized processes at solid-liquid or liquid-liquid interfaces. The fundamentals and recent advances of SECM in corrosion applications are described, including SECM mapping and kinetics on localized corrosion of metal or coating. Research work of SECM in corrosion by our group is also introduced. Future applications of SECM in corrosion are highlighted.
Applications Of Spectroscopic Ellipsometry In Corrosion Investigation,
2013
School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044;
Applications Of Spectroscopic Ellipsometry In Corrosion Investigation, Ling-Jie Li, Yu-Ling He, Jing-Lei Lei, Sheng Tao Zhang
Journal of Electrochemistry
As a highly-sensitive and non-destructive in situ technique, spectroscopic ellipsometry has been widely applied in corrosion investigation to acquire the dynamic information of the “electrode-medium” interface during corrosion. This paper lays out some representative demonstrations in several established optical models used to interpret data obtained with spectroscopic ellipsometry in corrosion investigation. In addition, the latest trends in development of this technique are analyzed.
Corrosion Behavior Of A High Strength Low Alloy Steel Under Hydrostatic Pressure In Deep Ocean,
2013
State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China;
Corrosion Behavior Of A High Strength Low Alloy Steel Under Hydrostatic Pressure In Deep Ocean, Hai-Jing Sun, Li Liu, Ying Li
Journal of Electrochemistry
The corrosion behavior of a high strength low alloy steel (HSLA steel) in 3.5% NaCl solution under hydrostatic pressure (HP) in deep ocean has been investigated by performing weight loss measurement, obtaining potentiodynamic polarization curve and emplying electrochemical impedance spectroscopy (EIS) using the set up for simulation of deep sea environment in laboratory. The results were compared with that at atmospheric pressure and the influence of HP was emphatically discussed. The results revealed identical corrosion mechanism for HSLA steel at 3.5 × 106 Pa and 1 × 105 Pa. Howevere, the development of such a corrosion process was …
Corrosion Resistance Of Low Pressure Cold Sprayed Al Coating On Q235 Steel In Seawater,
2013
State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSRMI), Qingdao 266101, Shandong, China;
Corrosion Resistance Of Low Pressure Cold Sprayed Al Coating On Q235 Steel In Seawater, Xiang-Bo Li, Li-Kun Xu, Shan-Guang Qiu, Jia Wang, Guo-Sheng Huang, Cai-Chang Dong
Journal of Electrochemistry
Taking aluminium (Al) powder mixed with 10% (by volume) of Al2O3 powder as raw materials, the Al coating was prepared on the Q235 carbon steel substrate using a portable low pressure cold spraying equipment. Through the measurements of the corrosion potential and potentiodynamic polarization, the electrochemical corrosion behavior of the low pressure cold sprayed Al coating in seawater was studied in comparison with those of the Al coatings deposited with high pressure cold spray and thermal spray processes. At the same time, the surface and cross-section morphologies of these coatings were observed with scanning electron microscope. The …
Corrosion Behavior Of Zinc Covered With Thin Electrolyte Layers Under External Electric Field,
2013
Key Laboratory of Shanghai Colleges and Universities for Electric Power Corrosion Control and Applied Electrochemistry, Shanghai University of Electric Power, Shanghai 200090, China;CCS-DNV Technology Institute, Shanghai 201417, China;
Corrosion Behavior Of Zinc Covered With Thin Electrolyte Layers Under External Electric Field, Xu-Jie Yuan, Jun-Xi Zhang, Shi-Ming Zhang, Tian Tan, Qi-Meng Chen
Journal of Electrochemistry
The corrosion behavior of zinc covered with thin electrolyte layers (TELs) under an application of external electric field was investigated by performing corrosion potential and cathodic polarization current measurements. The results showed that the Ecorr and ic values first increased and then decreased with the increase of electrolyte layer thickness. Pure zinc exhibited the maximum corrosion potential as the TELs increased to 400 μm under the controls of cathodic process and corrosion products. The application of external electric field resulted in either a negative shift in corrosion potential of zinc or an increase of cathodic current. The effect of external …
A Clamped Dual-Ridged Waveguide Measurement System For The Broadband, Nondestructive Characterization Of Sheet Materials,
2013
Air Force Institute of Technology
A Clamped Dual-Ridged Waveguide Measurement System For The Broadband, Nondestructive Characterization Of Sheet Materials, Milo W. Hyde Iv, Michael J. Havrilla
Faculty Publications
A novel two-port probe which uses dual-ridged waveguides for the nondestructive, broadband characterization of sheet materials is presented. The new probe is shown to possess approximately 2 to 3 times the bandwidth of traditional coaxial and rectangular/circular waveguide probe systems while maintaining the structural robustness characteristic of rectangular/circular waveguide probe systems. The theoretical development of the probe is presented, namely, by applying Love’s equivalence theorem and enforcing the continuity of transverse fields at the dual-ridged waveguide apertures, a system of coupled magnetic field integral equations is derived. The system of coupled magnetic field integral equations is solved using the method …
Cellulose Nanocrystals As A Material For Microencapsulation,
2013
Purdue University
Cellulose Nanocrystals As A Material For Microencapsulation, Lauren C. Kennedy, Congwang Ye, Colton Steiner, Carlos Martinez
The Summer Undergraduate Research Fellowship (SURF) Symposium
Cellulose is an abundant, biodegradable, and inexpensive renewable polymer that is light in weight with high mechanical strength (Habibi, Lucia, Rojas 2010). Full fibers of cellulose have been used in many products such as plastics and textiles for over a century and a half, but recently, modern extraction techniques have made it possible to investigate uses for minuscule cellulose fibers (Habibi, Lucia, Rojas 2010). Through acid hydrolysis, cellulose fibers become rod-like nanostructures with a high aspect ratio that are known as Cellulose Nanocrystals (CNCs) (Habibi, Lucia, Rojas 2010). Since CNCs are biodegradable and derive from a renewable resource, finding ways …
Next Generation Crystal Viewing Tool,
2013
Purdue University
Next Generation Crystal Viewing Tool, Zach Schaffter, Gerhard Klimeck
The Summer Undergraduate Research Fellowship (SURF) Symposium
The science and engineering community is limited when it comes to crystal viewing software tools. Each tool lacks in a different area such as customization of structures or visual output. Crystal Viewer 2.0 was created to have all of these features in one program. This one tool simulates virtually any crystal structure with any possible material. The vtkvis widget offers users advanced visual options not seen in any other crystal viewing software. In addition, the powerful engine behind Crystal Viewer 2.0, nanoelectronic modeling 5 or (NEMO5), performs intensive atomic calculations depending on user input. A graphical user interface, or GUI, …
Efficiently Dispersing Carbon Nanotubes In Polyphenylene Sulfide,
2013
Purdue University
Efficiently Dispersing Carbon Nanotubes In Polyphenylene Sulfide, Kevin M. Sommer, R. Byron Pipes
The Summer Undergraduate Research Fellowship (SURF) Symposium
Thermal plastics are replacing conventional metals in the aerospace, sporting, electronics, and other industries. Thermal plastics are able to withstand relatively high temperatures, have good fatigue properties, and are lighter than metals. Unfortunately, they are not very electrically conductive. However, adding carbon nanotubes to thermal plastics such as polyphenylene sulfide (PPS) can drastically increase the plastic's conductivity at a low weight percent of nanotubes called the percolation threshold. The percolation threshold is the point where adding a little more carbon nanotubes brings together the network of nanotubes and greatly increases the conductivity. We need to learn how to increase the …
Nanohub - Crystal Viewer 2.0,
2013
Purdue University
Nanohub - Crystal Viewer 2.0, Kevin Margatan, Gerhard Klimeck
The Summer Undergraduate Research Fellowship (SURF) Symposium
nanoHUB is an online compilation of tools for simulations. Equipped with 3-D simulations and a capability to solve very complex calculations, nanoHUB provides its users worldwide with various tools to help them finish their assignments. One of the tools available is called a Crystal Viewer Tool, an advanced crystal visualization tool. This tool allows users to generate various crystal types including their every single detail. Currently, a newer version, called Crystal Viewer 2.0, is being tested prior to its release. However, this tool is lacking some important features and a GUI that is not as user friendly as expected. The …
Prediction Of Fiber Orientation In Compression Molded Parts Of Short-Fiber-Reinforced Thermoplastics,
2013
Purdue University
Prediction Of Fiber Orientation In Compression Molded Parts Of Short-Fiber-Reinforced Thermoplastics, Anshuman Jagtap, R Byron Pipes, Chris Schwall, Ethan Brubaker
The Summer Undergraduate Research Fellowship (SURF) Symposium
Short Fiber molded thermoplastics like poly ether ketone ketone (PEKK) have the potential to be used to build reinforcement structures for next generation air crafts. Because of the anisotropic properties of these fibers, it is necessary to know the orientation of fibers in molded parts to determine the strength of parts. The goal of the project is to prepare samples that will be used to determine the spatial distribution of fibers as a function of the parts thickness and for comparison with computer generated models to test for accuracy. Using a full factorial method the effects of four key control …
Testing Self Healing Properties In Polymers,
2013
Purdue University
Testing Self Healing Properties In Polymers, Hamsini Gopalakrishna, John Blendell
The Summer Undergraduate Research Fellowship (SURF) Symposium
Mussels and barnacles have the ability to stick to underwater surfaces with the help of a cross-linked protein structure. Reduction in the plastic consumption can be achieved by using toughened polymers. Synthesized cross-linking polymers can be used for underwater adhesion by mimicking the protein structure used by mussels and barnacles. One such polymer is poly(3,4-dihydroxystyrene-co-styrene) having enhanced toughness. Traditionally, blister tests measure the adhesion between a substrate to a surface but this was modified to serve as the driving force to drive crack propagation in controlled flaws. The modified blister tests were carried out on polystyrene (PS) samples. Once the …
Silver Oxide-Graphene Sensor For Hydrogen Peroxide,
2013
Purdue University
Silver Oxide-Graphene Sensor For Hydrogen Peroxide, Austin D. Scherbarth, L Stanciu
The Summer Undergraduate Research Fellowship (SURF) Symposium
A nonenzymatic, amperometric sensor for Hydrogen Peroxide (H2O2) was designed by drop coating glassy carbon electrodes (GCEs) with Silver Oxide (Ag2O). Combining Ag2O with Graphene Oxide and a polymer, PEDOT, was also attempted in order to increase stability and electrochemical properties. Using metal oxides along with Graphene Oxide for sensors has been done quite a bit, but Ag2O itself has not been research extensively. So, in order to produce the best H2O2 sensor, the configuration of all components had to be optimized. Three different Ag2O …
Intermetalic Growth Rate In Transient Liquid Phase Sintering Of Pb-Free Solder Interconnects,
2013
Purdue University
Intermetalic Growth Rate In Transient Liquid Phase Sintering Of Pb-Free Solder Interconnects, Shuqing Zhang, John Blendell
The Summer Undergraduate Research Fellowship (SURF) Symposium
Following the electron devices are widely used in daily life, Pb-free solder alloy, as the replacement of Pb solder joint material, needs extensive researches to observe the properties for using and simulation purpose. Solder are used as the joint to connect two work pieces in printed wiring board of electronics. Most lead-free solders comprise tin (Sn) as the majority component, and nominally pure b-Sn is the majority phase in the microstructure of these solders. The most important thing for solder joint that researchers care about is its life cycle. Due to the incomplete of the mechanical profile of Pb-free solder …
Characterization Of Lead-Free Piezo-Ceramics,
2013
Purdue University
Characterization Of Lead-Free Piezo-Ceramics, Hanhan Zhou, John Blendell
The Summer Undergraduate Research Fellowship (SURF) Symposium
Lead zirconate titanate (PZT) has been the most commonly used piezoelectric material due to its high piezoelectric performance under varied operating conditions. However, it has been noticed that the lead component is toxic, causing some environmental issues and a lead free substitute material was introduced. The substituted environmental friendly piezoelectric material, Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 (BZT-xBCT) system that can fulfill the need of high piezoelectricity has been developed. The research was conducted to characterize the BZT-xBCT system with five different compositions (x=0.06, 0.08, 0.1, 0.12 and 0.14).. XRD was applied to examine the crystal structure of the samples before and after poling and …
Characterization Of Hardness And Elastic Modulus Of A Pharmaceutical Material For Multiple Crystal Orientations,
2013
Colorado School of Mines
Characterization Of Hardness And Elastic Modulus Of A Pharmaceutical Material For Multiple Crystal Orientations, Alexis L. Mertz, David F. Bahr
The Summer Undergraduate Research Fellowship (SURF) Symposium
Nanoindentation has made it possible to test material properties of extremely brittle molecular crystals, which include many pharmaceuticals. An antifungal, griseofulvin, is tested to determine differences in hardness and elastic modulus for different crystal orientations. Hardness and elastic modulus are determined by nanoindentation on single crystals that are rotated in 15° intervals. There are differences in hardness at rotation degrees of 45°, 60°, and 75° from the 0° orientation and differences in elastic modulus at rotation degrees of 15°, 60°, and 75° from the 0° orientation. It is also found that the elastic modulus and hardness values of the 75° …
Interfacial Rheological Mechanics Of A Non-Ionic, Tri-Block Copolymer At Water/Hexadecane Interface,
2013
Purdue University
Interfacial Rheological Mechanics Of A Non-Ionic, Tri-Block Copolymer At Water/Hexadecane Interface, Jerome J. Nash, Kendra Erk
The Summer Undergraduate Research Fellowship (SURF) Symposium
Growing interest on the stability of foams and emulsions has lead to concentrated research of interfacial rheology. The response of an interfacial layer to mechanical deformation in size and shape is dependent on its composition. [Miller 2010] This research analysis focused on the adsorption and rheological mechanics of the non-ionic, tri-block copolymer, Pluronic 17R4 at the water/hexadecane interface. The adsorption and viscoelastic properties of the interface were measured via methods of pendant drop tensiometry and dynamic oscillation with drop shape analysis software. Interfacial tension measurements were taken to study the surface pressures of Pluronic 17R4 solutions with concentrations ranging from …
