Materials Science and Engineering Commons^™

A Novel Injectable Borate Bioactive Glass Cement As An Antibiotic Delivery Vehicle For Treating Osteomyelitis, Hao Ding, Cunju Zhao, Xu Cui, Yifei Gu, Weitao Jia, M. N. Rahaman, Yang Wang, Wenhai Huang, Changqing Zhang

Materials Science and Engineering Faculty Research & Creative Works

Background: A novel injectable cement composed of chitosan-bonded borate bioactive glass (BG) particles was evaluated as a carrier for local delivery of vancomycin in the treatment of osteomyelitis in a rabbit tibial model. Materials and Methods: The setting time, injectability, and compressive strength of the borate BG cement, and the release profile of vancomycin from the cement were measured in vitro. The capacity of the vancomycin-loaded BG cement to eradicate methicillin-resistant Staphylococcus aureus (MRSA)-induced osteomyelitis in rabbit tibiae in vivo was evaluated and compared with that for a vancomycin-loaded calcium sulfate (CS) cement and for intravenous injection of vancomycin. Results: …

Real Time Monitoring Of Cell-Nanoparticles Interaction And Tracking Internalization Process By Mechanical Probing Using Atomic Force Microscopy, Anh Ly

Electronic Theses and Dissertations

With extensive development of nanotechnology in last few years, scientists have discovered that nanoparticles (NPs) can be used as an efficient Drug Delivery System (DOS). In order to develop better NPs based drug delivery tool, it is imperative to understand the interaction between the NPs and the cell membrane. In our earlier studies, cerium oxide nanoparticles (CNPs) have been reported to have therapeutic properties, specifically against abnormalities associated with oxidative stress. Therefore, CNPs with different sizes and morphology were selected to understand the interaction with cell. We analyzed the mechanical property of human nasal septum tumor cells membranes using Atomic …

Effect Of Rhenium On Short Term Oxidation Of Niobium Based Alloys For High Temperature Applications, Ruth M. Sierra

Open Access Theses & Dissertations

The effect of adding Re to Nb-based alloys and is intended to analyze in depth the microstructures of Nb based alloys with Re, Si and Cr additions, in atomic percentages. The binary alloys (Nb-5Re, Nb-5Si and Nb-5Cr) reveal the formation of a single phase, NbSS, NbSS+ Nb3Si and NbSS+NbCr2 respectively. The formation of the single phase was confirmed by TEM studies for the Nb-5Re alloy. Addition of Re to form ternary alloys, has helped in the formation of Nb5Si3 and (Nb, Re) Cr2, in Nb-5Re- 5Si and Nb-5Re-5Cr respectively. Quaternary alloy Nb-5Re-5Si-5Cr has Nb5Si3, NbCr2 and NbSS. The oxidation behavior …

An Uncooled Mid-Wave Infrared Detector Based On Optical Response Of Laser-Doped Silicon Carbide., Geunsik Lim

Electronic Theses and Dissertations

This dissertation focuses on an uncooled Mid-Wave Infra-Red (MWIR) detector was developed by doping an n-type 4H-SiC with Ga using the laser doping technique. 4H-SiC is one of the polytypes of crystalline silicon carbide, a wide bandgap semiconductor. The dopant creates an energy level of 0.30 eV, which was confirmed by optical spectroscopy of the doped sample. This energy level corresponds to the MWIR wavelength of 4.21 µm. The detection mechanism is based on the photoexcitation of electrons by the photons of this wavelength absorbed in the semiconductor. This process modifies the electron density, which changes the refraction index and, …

Using Acoustic Emission Monitoring For Energy-Based Fatigue Life Prediction, Sepehr Nesaei

Electronic Theses and Dissertations

The study of fatigue and fracture mechanics is crucial to the health monitoring and overall safety of aerospace and civil structures. The materials used to manufacture these industry parts have inherent anomalies that eventually grow under cyclic loadings during regular operation. The ASTM and/or military testing guidelines used to analyze and qualify structures and materials for use are costly and time consuming. Therefore, any additional methods or knowledge that can be used to reduce the number of tests will be useful to the industry to avoid unnecessary costs. Acoustic emission (AE) monitoring is currently used in many applications to assess …

Bioactive Glass/Polymer Composites For Bone And Nerve Repair And Regeneration, Ali Mohammadkhah

Doctoral Dissertations

"Bioactive glasses have several attractive properties in hard and soft tissue repair but their brittleness limited their use, as scaffolding materials, for applications in load- bearing hard tissue repair. At the same time, because of their bioactive properties, they are being studied more often for soft tissue repair. In the present work, a new glass/polymer composite scaffold was developed for the repair of load-bearing bones with high flexural strength and without brittle behavior. The new composites have 2.5 times higher flexural strength and ~100 times higher work of fracture (without catastrophic failure) compared to a similar bare glass scaffold.

Also …

Cerium-Based Conversion Coatings On Magnesium Alloys, Carlos E. Castaño

Doctoral Dissertations

"This research is primarily focused on gaining a better understanding of the deposition and corrosion behavior of cerium-based conversion coatings (CeCCs) on AZ31B and AZ91D Mg alloys. Deposition of homogenous and protective CeCCs was highly dependent on the surface preparation steps. The best results were obtained when Mg samples underwent grinding, acid cleaning, and alkaline cleaning processes. This reduced the number of active cathodic sites and promoted the formation of a protective Al-rich Mg oxide/hydroxide layer. Electrochemical properties of the CeCCs were also strongly correlated with morphological, microstructural, and chemical characteristics. Protective CeCCs were deposited on both AZ31 and AZ91 …

The Structure And Properties Of Ternary Zinc Phosphate Glasses For Optical Applications, Charmayne Elizabeth Smith

Doctoral Dissertations

"This dissertation focuses on the properties and structures of ternary zinc phosphate glasses that have recently been investigated as substrates for femto-second (fs) laser writing. Although these glasses have potential for use as optical substrates, their poor chemical properties limit their applications. In this work, ternary zinc phosphate glasses were studied to find compositions with enhanced chemical durability and the properties and structures of the investigated glasses are reported.

Paper 1 and Paper 2 include the first systematic studies of the properties, structures of zinc aluminophosphate (ZAP) glasses and phase relationships in the ZnO-Al₂O₃-P₂O₅ system, respectively. Adding alumina to a …

Improving The Oxidation Resistance Of Diboride-Based Ceramics, Maryam Kazemzadeh Dehdashti

Doctoral Dissertations

"Oxidation behavior has restricted the development of ZrB₂-based ceramics for aerospace and hypersonic flight vehicles applications. The research presented in this dissertation focuses on the effect of transition metal (TM) additives on oxidation behavior of ZrB₂ ceramics. In the first stage of the research, the effect of Nb additions on the morphology of the oxide particles and stability of the protective B₂O₃ glassy layer, which formed on the top surface during oxidation, was investigated. Addition of Nb increased the thickness of the glassy layer and, as a result, improved the oxidation resistance of ZrB₂ after oxidation at 1500⁰C. Next, the …

Phosphate-Doped Borosilicate Enamel Coating Used To Protect Reinforcing Steel From Corrosion, Xiaoming Cheng

Doctoral Dissertations

"Phosphate-doped sodium borosilicate glasses were developed for enamel coatings to provide corrosion protection for reinforcing steel in concrete. Phosphates have low solubilities in borosilicate glasses, generally less than about 4 mol%, and are incorporated mainly as isolated PO₄^3- and P₂O₇^4- anions, along with some borophosphate bonds. With the addition of P₂O₅, the silicate network is repolymerized and tetrahedral borates are converted to trigonal borates, because the phosphate anions scavenge sodium ions from the borosilicate network. The addition of Al₂O₃ significantly increases the solubility of P₂O …

The Effect Of Composition On The Viscosity, Crystallization And Dissolution Of Simple Borate Glasses And Compositional Design Of Borate Based Bioactive Glasses, Kathryn Lynn Goetschius

Doctoral Dissertations

"Borate glasses have recently been developed for a variety of medical applications, but much less is known about their structures and properties than more common silicate glasses. Melt properties and crystallization tendency for compositions in the Na₂O-CaO-B₂O₃ system were characterized using differential thermal analysis and viscosity measurements. Characteristic viscosity (isokom) temperatures varied with the ratio between the modifier content (Na₂O+CaO) and B₂O₃, particularly at lower temperatures, consistent with the changes in the relative concentrations of tetrahedral borons in the glass structure.

Similar glasses were used to study dissolution processes …

Effect Of Solid Solutions And Second Phases On The Thermal Conductivity Of Zirconium Diboride Ceramics, Gregory John Kenneth Harrington

Doctoral Dissertations

"The research presented in this dissertation is focused on the thermal conductivity (k) of ZrB₂ ceramics. The goal was to develop a better understanding of how various solid solutions and second phases affect the thermal and electrical transport in ZrB₂, with a focus on the effect of C, W, and ZrC. The first study showed C additions improved densification and it was proposed that the reduction of boria was the impetus for this result. Boron carbide was formed by the reaction of excess C with reduced B and its formation was mitigated by the addition of ZrH …

First-Principles Investigations Of Iron-Based Alloys And Their Properties, Krista Renee Limmer

Doctoral Dissertations

"Fundamental understanding of the complex interactions governing structure-property relationships in iron-based alloys is necessary to advance ferrous metallurgy. Two key components of alloy design are carbide formation and stabilization and controlling the active deformation mechanism. Following a first-principles methodology, understanding on the electronic level of these components has been gained for predictive modeling of alloys.

Transition metal carbides have long played an important role in alloy design, though the complexity of their interactions with the ferrous matrix is not well understood. Bulk, surface, and interface properties of vanadium carbide, VC_x, were calculated to provide insight for the carbide …

Thermophysical Properties Of Reaction Processed Zirconium Diboride, Jason Michael Lonergan

Doctoral Dissertations

"This dissertation focuses on the thermophysical properties of high purity zirconium diboride ceramics. These ceramics have shown promise for potential applications such as leading edge materials for next generation hypersonic vehicles. The overall goal of this work was to improve the understanding of the thermal properties and maximize the thermal conductivity of ZrB₂. Four main areas were investigated in this work. First, the sintering kinetics and the intrinsic thermal properties of reaction processed ZrB₂ were studied and compared to ZrB₂ produced by hot pressing commercial powders. The reaction process produced ceramics with higher thermal conductivity and …

Mechanical And Transport Properties Of Alkali-Activated Natural Pozzolans As Sustainable Binders, Brittany Radke

Calvert Undergraduate Research Awards

OPC production accounts for 5 to 7% of the global carbon dioxide (CO₂) emissions, contributing to global warming. The desire to reduce CO₂ emissions and produce more durable concrete has given impetus to search for new binders. It is suggested that alkali-activated natural pozzolans have the potential for use as a sustainable replacement for OPC in concrete.

The current study presented herein evaluated fresh, mechanical, and transport properties of alkali-activated natural pozzolan mortars containing various concentrations of sodium hydroxide solutions as an alkaline activator. To this aim, alkali-activated natural pozzolan mortars were made with concentrations of sodium …

Optical Properties Of Carbon Microcoils, Muneaki Hikita, Li Cao, Khalid Lafdi

Chemical and Materials Engineering Faculty Publications

Carbon microcoils (CMCs) have emerged as versatile material artifacts for a variety of applications due to their helical and spiral structures. Embedded in matrix, CMCs have already been demonstrated for their potential tactile/proximity sensor application. In this study, CMCs were prepared using a conventional chemical vapor deposition method, and then were functionalized with octadecylamine.

Upon photoexcitation, the functionalized CMCs exhibited photoluminescence in the visible region, which has never been found before. Similar to carbon based nanoparticles, the photoluminescence of CMCs was attributed to electron-hole radiative recombination after surface passivation. The results suggested that this kind of fluorescent functionalized CMCs might …

Influence Of Dissolved Hydrogen On The Fatigue Crack Growth Behaviour Of Aisi 4140 Steel, Varun Ramasagara Nagarajan

Wayne State University Dissertations

Many metallic structural components come into contact with hydrogen during manufacturing processes or forming operations such as hot stamping of auto body frames and while in service. This interaction of metallic parts with hydrogen can occur due to various reasons such as water molecule dissociation during plating operations, interaction with atmospheric hydrogen due to the moisture present in air during stamping operations or due to prevailing conditions in service (e.g.: acidic or marine environments). Hydrogen, being much smaller in size compared to other metallic elements such as Iron in steels, can enter the material and become dissolved in the matrix. …

Fatigue Life Prediction Of Magnetorheological Elastomers Subjected To Dynamic Equi-Biaxial Cyclic Loadin, Yanfen Zhou, Stephen Jerrams, Tony Betts, Lin Chen

Articles

Prediction of fatigue life is of great significance in ensuring that dynamically loaded rubber components exhibit safety and reliability in service. In this text, the dynamic equi-biaxial fatigue behaviour of magnetorheological elastomer (MREs) using a bubble inflation method is described. Wöhler (S-N) curves for both isotropic and anisotropic MREs were produced by subjecting the compounds to cycling over a range of stress amplitudes (σ_a) between 0.75 MPa and 1.4 MPa. Changes in physical properties, including variation in stress-strain relations and complex modulus (E*) during the fatigue process were analysed. It was found that the complex modulus of MRE …

Fundamental Studies Of Supported Graphene Interfaces : Defect Density Of States In Graphene Field Effect Transistors (Fets) And Ideal Graphene - Silicon Schottky Diodes, Dhiraj Sinha

Legacy Theses & Dissertations (2009 - 2024)

The physics of transport in atomically thin 2D materials is an active area of research, important for understanding fundamental properties of reduced dimensional materials and for applications. New phenomena based on graphene may include properties of topologically protected insulators. Applications of these materials are envisioned in electronics, optoelectronics and spintronics.

Investigating Quantum Oscillations In The Thermal Coefficient Of Resistivity Of Ultra-Thin Ag Capping Layers On Cu For Ic Interconnect Applications, Elroy Tatem

Legacy Theses & Dissertations (2009 - 2024)

As the semiconductor industry continues to scale feature sizes, scattering from phonons, surfaces, and grain boundaries result in an increase of metal interconnect resistivity in state-of-the-art integrated circuits (ICs). The interconnect chapter of the 2011 International Technology Roadmap for Semiconductors (ITRS) stated that there are currently no manufacturable solutions in the near term for suitable Cu replacements. Previous studies of thin Ag films deposited on Cu demonstrated oscillations in the electron-phonon interactions within the bilayer system. This thesis investigates oscillations in the resistive properties of the Ag/Cu bilayer system and discusses the applicability of these oscillations to the resistivity challenges …