Research On Prefabrication Scheme Of Concrete Barrier Based On Anchorage In Cast-In-Situ Layer,
2025
Zhongshan Donghuan Expressway Co ., Ltd., Zhongshan , Guangdong 528400 , China
Research On Prefabrication Scheme Of Concrete Barrier Based On Anchorage In Cast-In-Situ Layer, Liang Xiaochong, Kang Hanjing, Luo Yongchuan, Wen Zhiquan, Deng Bao
Journal of China & Foreign Highway
In order to improve the on-site construction efficiency of bridge concrete barriers,a prefabrication scheme for bridge concrete barrier installation was proposed.A structure scheme was developed by anchoring transverse steel bars at the bottom of prefabricated wall panels into the integrated cast-in-situ layer,adopting tongue-and-groove connections between adjacent wall panels,and optimizing the structural configuration and reinforcement of the panels.According to the requirements of the Level VI protection standard,full-scale impact tests using a large bus and a large truck were organized in turn.The results show that the prefabricated concrete bridge barrier can effectively withstand continuous impacts from both large buses and trucks.Its structural …
Application And Analysis Of Energy-Conservation And Carbon-Reduction Technologies In Green Highways,
2025
Anhui Transportation Holding Group Co ., Ltd., Hefei，Anhui 230088 , China
Application And Analysis Of Energy-Conservation And Carbon-Reduction Technologies In Green Highways, Huang Xuewen, Wang Kai, Huang Shanqian, Xiong Xinzhu, Fu Jinsheng
Journal of China & Foreign Highway
To improve the low-carbon development level of highway engineering,this study relied on a typical green highway in Anhui Province and established a calculation model for energy-conservation and carbon-reduction in highway engineering based on the emission factor method.A combination of quantitative and qualitative approaches was adopted to evaluate the benefits of 33 energy-conservation and carbon-reduction technologies in reducing life cycle energy consumption and carbon emissions,based on life cycle assessment (LCA ) theory.The results show that during the material production stage,through channel resource coordination and the application of low-carbon,energy-saving materials,comprehensive reductions in the embodied carbon can be achieved.During the construction stage,energy consumption …
Influence Of Horizontal Curve Radius On Vehicle Fuel Consumption And Pollutant Emissions On Tw O-Lane Highways,
2025
School of Materials and Architectural Engineering , Guizhou Normal University , Guiyang , Guizhou 550025 , China
Influence Of Horizontal Curve Radius On Vehicle Fuel Consumption And Pollutant Emissions On Tw O-Lane Highways, Tu Shengwen, Lei Meimei, Guo Wenyu
Journal of China & Foreign Highway
To investigate the influence of horizontal curve radius on vehicle fuel consumption and pollutant emissions on two-lane highways,this study developed a model based on running speed theory,vehicle driving dynamics,and a fuel consumption and emission analysis system.Fuel consumption and emissions of CO2,CO,HC,and NOx were calculated for a passenger car traveling along horizontal curves under three design speeds:40 km/h,60 km/h,and 80 km/h.The results show that the horizontal curve radius has a significant effect on vehicle fuel consumption and pollutant emissions.The trends of fuel consumption,CO2,and NOx emissions vary consistently with curve radius,while CO and HC emissions follow a similar but different trend.At the …
Reference And Inspi Ration From Low-Carbon Development Experience Of Foreign Highway Infrastructure,
2025
China Academy of Transportation Sciences , Beijing 100029 , China
Reference And Inspi Ration From Low-Carbon Development Experience Of Foreign Highway Infrastructure, Lu Chunying, Gao Shuohan, Du Xueyua N, Jian Li, Wang Xinjun, Kong Yaping
Journal of China & Foreign Highway
In order to provide supp ort for the scie ntific formulation of low-carbon highway infrastructure development policies in China,empirical analysis,comparative analysis,and other methods were utilized,and the construction goals and action strategies of low-carbon highway infrastructure in the United Kingdom,the United States,and Australia were sorted out.Advanced experience in the development of low-carbon highways abroad was summarized.On this basis,combined with the current situation and existing problems of low-carbon development of China ’s highway infrastructure,the following countermeasures and suggestions were proposed:① strengthening top-level design and formulating low-carbon development goals and paths;② implementing the concept of life cycle and strengthening the research and promotion …
A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing,
2025
Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi
Journal of Materials Exploration and Findings
Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …
Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin,
2025
Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, 16424, Indonesia.
Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor
Journal of Materials Exploration and Findings
Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO2 emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …
Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare,
2025
University of Nevada, Las Vegas
Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He
UNLV Theses, Dissertations, Professional Papers, and Capstones
Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …
Bio-Inspired Electroactive Polymer (Eap) Sensors For Surface And Canal Flow Sensing In Dynamic Environments,
2025
University of Nevada, Las Vegas
Bio-Inspired Electroactive Polymer (Eap) Sensors For Surface And Canal Flow Sensing In Dynamic Environments, Nazanin Minaian
UNLV Theses, Dissertations, Professional Papers, and Capstones
Nature can often create some of the most efficient and elegant solutions to complex problems, and engineering stands to benefit greatly from these time-tested designs. One of the more sophisticated examples of this is the lateral line system in fish: a distributed network of superficial and canal neuromasts that enables aquatic species to detect fluid disturbances with remarkable precision. This dissertation leverages that biological framework to explore the potential of electroactive polymers (EAPs), aiming not just to replicate structure, but to emulate function.Two classes of EAPs form the basis of this work: electroactive plasticized polymer gels (EPPGs) and ionic polymer-metal …
Development Of Construction Materials With Natural Fibers And Flax Shives For Green Eco-Friendly Buildings. Mrs Advances (2025),
2025
Cairo University
Development Of Construction Materials With Natural Fibers And Flax Shives For Green Eco-Friendly Buildings. Mrs Advances (2025), Iman El-Mahallawi, Lamiaa Mohamed, Rania El‑Shorbagy, Mahmoud Tash, Aliaa Abdelfatah
Mechanical Engineering
Sustainability-oriented solutions are essential to address the depletion of natural resources, solid waste accumulation, and high CO2 emissions in the construction industry. This research focuses on the development of environmentally friendly green bricks by replacing high-carbon-footprint constituents with local, natural materials. Specifically, flax shives, a natural agricultural by-product, and marble powder, an industrial waste, were used as partial substitutes in the binder matrix. The natural fibers not only promote sustainability but also enhance insulation and reduce the environmental burden. The bricks were molded into rectangular specimens (60 × 100 × 200 mm) and tested for thermal conductivity, moisture absorption, and …
Development And Optimization Of Gradient Pore Structured Porous Ceramics: Modeling, Properties, And Potential For Industrial Production In Thermal Insulation Engineering,
2025
Missouri University of Science and Technology
Development And Optimization Of Gradient Pore Structured Porous Ceramics: Modeling, Properties, And Potential For Industrial Production In Thermal Insulation Engineering, Gang Qi, Minghui Li, Ruoyu Chen, Haichuan Wang, Haiming Wen, Yi Ding, Xiaoyu Xia, Dixin Yan, Can Chen, Saisai Li
Materials Science and Engineering Faculty Research & Creative Works
This study prepared gradient pore structure ceramics from silica fume through direct foaming. The rheological behavior of the slurry was improved by varying the solids content. Physical and mathematical models were developed to describe the longitudinal movement of foam in the ceramic slurry and the mechanism of gradient pore formation. These models were used to predict the pore sizes at different heights within the ceramic. Insulation and mechanical properties were enhanced by optimizing the gradient pore structure. The gradient pore structure resulted in significant directional differences in specimen properties. Additionally, suitable sintering-temperatures for gradient pore structure ceramics are discussed. The …
Wear Of High Entropy Alloys: Understanding Effects Of Cryogenic Temperatures And Surface Nitriding On Wear Behavior,
2025
Dartmouth College
Wear Of High Entropy Alloys: Understanding Effects Of Cryogenic Temperatures And Surface Nitriding On Wear Behavior, Aubrey Yu Tang
Dartmouth College Ph.D Dissertations
Cryogenic tribological applications have become increasingly important with the development and innovation of advanced equipment in aerospace, polar regions, superconductivity, and more. Traditional lubrication methods are not viable under these harsh environments, so metallic materials must be able to maintain excellent mechanical properties and withstand the constant impact and wear alone. High entropy alloys (HEAs) have emerged as potential candidates for these applications because of their wide variety of excellent room temperature properties and apparent improvement of mechanical properties of some HEAs at extremely low temperatures. Despite their promising nature, very limited work has been done on understanding the wear …
64th Annual Rocky Mountain Conference On Magnetic Resonance,
2025
University of Denver
64th Annual Rocky Mountain Conference On Magnetic Resonance
Rocky Mountain Conference on Magnetic Resonance
Final program, abstracts, and information about the 64th annual meeting of the Rocky Mountain Conference on Magnetic Resonance. Held in the Snowbird Resort and Conference Center, Snowbird, Utah, August 3-7, 2025.
Transformations Of Uzbekistan Quartz Raw Materials – Quartzites Of The Dzherdanak Deposit And Vein Quartz Of The Nurota Deposit Under Thermal Impact,
2025
Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan
Transformations Of Uzbekistan Quartz Raw Materials – Quartzites Of The Dzherdanak Deposit And Vein Quartz Of The Nurota Deposit Under Thermal Impact, Umar G. Nomazov, Mastura Kh. Aripova
CHEMISTRY AND CHEMICAL ENGINEERING
The aim of the work is to study the transformations of quartz raw materials as a result of high-temperature exposure. The objects of the study were quartzite from the Dzherdanak deposit in the Surkhandarya region and vein quartz from the Nurota deposit in the Samarkand region. The mineralogical composition of natural raw materials and phase and structural transformations during high-temperature exposure to 1430 ° C were studied using X-ray and differential thermal analysis. Based on the results of physicochemical analysis methods, it was found that vein quartz consists entirely of quartz and, therefore, it can be assumed that impurity elements …
Kinetics Of Adsorption Of Copper And Nickel Ions Using A Rice Husk-Based Sorbent,
2025
Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan
Kinetics Of Adsorption Of Copper And Nickel Ions Using A Rice Husk-Based Sorbent, Aziza A. Maksudova, Shukhrat A. Mutalov, Klara M. Adilova
CHEMISTRY AND CHEMICAL ENGINEERING
The aim of this study is to investigate the adsorption kinetics of Cu(II) and Ni(II) ions from aqueous solutions using an adsorbent obtained by treating rice husk with a solution of monoethanolamine. The experiments evaluated the influence of contact time on the efficiency of metal ion removal and calculated the adsorption capacity. To analyze the adsorption process kinetics, pseudo-first-order and pseudo-second-order kinetic models were applied. The results demonstrated that the adsorption process follows the pseudo-second-order kinetic model. Thus, monoethanolamine-modified rice husk can be considered an effective, environmentally friendly, and economically viable sorbent for the removal of heavy metal ions from …
Quantum-Chemical Study Of Complex Compounds Of Lanthanides With 2-Aminobenzimidazole Derivatives,
2025
Alfraganus University; Uzbek-Japan Innovation Center of Youth, Tashkent, Uzbekistan
Quantum-Chemical Study Of Complex Compounds Of Lanthanides With 2-Aminobenzimidazole Derivatives, Bakhtigul Yu. Ruzieva, Feruza F. Fayzullayeva, Zuhra Ch. Kadirova, Shahlo Sh. Daminova
CHEMISTRY AND CHEMICAL ENGINEERING
The aim of this study is to perform quantum-chemical modeling of mixed-ligand complexes of trivalent lanthanoid ions (Ln³⁺) involving primary ligands — 2-amino-1-methylbenzimidazole (MAB) and 2-phenylmethyl-1H-benzimidazole (FAB), as well as additional ligands — diethyldithiocarbamate (DEDTK), benzohydroxamic acid (BGK), and potassium diisopropyldithiophosphate (DiPDTP). Quantum-chemical calculations were carried out using semi-empirical methods within the PM3 and PM6 approaches, implemented in the BIOVIA Materials Studio (Accelrys Studio 2017) software package. The obtained data made it possible to determine the influence of the nature of the mixed ligands on the coordination behavior of lanthanoids and the stability of the corresponding complexes.
Synthesis And Ir Spectroscopic Study Of Complexes Of Selected 3d-Metals With 2-(Phenylmethyl)-1h-Benzimidazole,
2025
National University of Uzbekistan, Tashkent, Uzbekistan
Synthesis And Ir Spectroscopic Study Of Complexes Of Selected 3d-Metals With 2-(Phenylmethyl)-1h-Benzimidazole, Gulnoza O. Babayeva, Gulbeka G. Mamatova, Daminbek A. Ziyatov, Lola Sh. Makhmudova, Shahlo Sh. Daminova
CHEMISTRY AND CHEMICAL ENGINEERING
The aim of this study was the synthesis and structural investigation of coordination compounds of selected 3d-metals with 2-(phenylmethyl)-1H-benzimidazole (FAB) using IR spectroscopy. Complexes of copper(II), nickel(II), cobalt(II), and zinc(II) with the general formula [M(FAB)2Cl2], as well as a complex [Co(FAB)2(ac)2], were synthesized. IR spectroscopic analysis revealed that FAB coordinates to metal ions through the nitrogen atom of the benzimidazole ring. Shifts in the ν(C=N), ν(C-N) bands and the appearance of new bands in the 580-430 cm⁻¹ region corresponding to ν(M-N) and ν(M-Cl) confirm the formation of metal complexes. It was established …
Technological And Mechanical Properties Of Polyethylene Filled With Nano-Sized Calcium Carbonate,
2025
«Shurtan Gas Chemical Complex» LLC, Guzar, Uzbekistan
Technological And Mechanical Properties Of Polyethylene Filled With Nano-Sized Calcium Carbonate, Ilyos M. Makhmudov, Ravshan I. Adilov, Muzafar G. Alimukhamedov, Farangiz B. Izzatullayeva
CHEMISTRY AND CHEMICAL ENGINEERING
Currently, one of the most effective and cost-effective ways to modify the properties of polyethylene is to introduce various fillers of organic or inorganic origin. The purpose of this work was to study the effect of the concentration of nanosized calcium carbonate on the technological and physicomechanical properties of polyethylenes of various origins. In the work, we used two grades of polyethylene: HDPE (273-83) and LDPE (10803-020) produced by Kazanorgsintez OJSC. The following were used as nanofillers: nanosized calcium carbonate in the form of a compound of the Nano-cal NC-K0117 brand made in China. The dependence of the physicomechanical properties …
Additional Loss On Ignition Of Cement Raw Mixes At High Temperatures,
2025
Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan
Additional Loss On Ignition Of Cement Raw Mixes At High Temperatures, Geun-Seong Lee, Farrukh B. Erkinov, Mastura Kh. Aripova
CHEMISTRY AND CHEMICAL ENGINEERING
Loss on ignition (LOI) of cement, raw materials and raw mixes in cement industry is specified as the weight loss at 900~1000 oC and 15~30 minutes in the standards of each region (GOST, ISO, ASTM, JIS, KS) in the world, and the clinker yield produced from the raw mixes feeding to the kiln process is generally derived from the LOI. The kiln conditions are significantly different from those specified in the standards, because the material temperature is up to 1450 oC and the residence time is about 15 minutes above 1000 oC in the kiln burning process. …
Composition Of Porcelain Mass Based On Clay Shale From The Dzherdanak Deposit,
2025
Tashkent Institute of Chemical Technology
Composition Of Porcelain Mass Based On Clay Shale From The Dzherdanak Deposit, Ripsime V. Mkrtchyan
CHEMISTRY AND CHEMICAL ENGINEERING
Known sources of high-quality raw materials are depleted. To meet the growing demand for porcelain products, natural raw materials from new deposits are being studied. The aim of the study is to develop a composition of porcelain mass for household porcelain based on unconventional raw materials - clay shales of the Dzherdanak deposit. Compositions of hard porcelain based on clay shales and other components of local natural raw materials with and without magnesium oxide have been developed. As a result of X-ray and electron microscopic studies of the porcelain structure, it was determined that the crystalline phases in the porcelain …
Solvent- And Binder-Free Additive Manufacturing Of Polymer-Derived Ceramics: Rheological Tuning And Structural Performance,
2025
Missouri University of Science and Technology
Solvent- And Binder-Free Additive Manufacturing Of Polymer-Derived Ceramics: Rheological Tuning And Structural Performance, Laxmi Sai Viswanadha, Jeremy Watts, Mohammad Naraghi
Materials Science and Engineering Faculty Research & Creative Works
Silicon carbide (SiC) ceramic matrix composites are widely used in aerospace applications due to their high strength, heat resistance, and corrosion resistance. However, traditional machining methods make it challenging to fabricate complex shapes. This study presents a solvent-free and binder-free direct ink writing (DIW) method for producing SiC/SiOC composites using polycarbosilane SMP-10, a preceramic polymer that acts as both the ceramic precursor and the liquid phase, thereby eliminating the need for volatile solvents and sacrificial binders. By adjusting the SiC content, printable ink formulations were developed, and their flow properties were analyzed. The influence of geometric factors, such as inter-wall …
