Electron Energy Loss Spectroscopy Signal Processing Tool For Materials Research,
2015
Purdue University
Electron Energy Loss Spectroscopy Signal Processing Tool For Materials Research, Scott Mullen, Chang Wan Han, Volkan Ortalan
The Summer Undergraduate Research Fellowship (SURF) Symposium
Allowing scientists to analyze materials’ structure and chemistry at an atomic level, the electron microscope has become a vital tool in materials engineering. Due to the inherent nature of signals (inelastic electrons or X-ray) having a low signal-to-noise ratio, processing the signal collected with an electron microscope is frequently required and uses sophisticated computer code. The software written to do this can be very difficult to learn and use. To make these tools more easily accessible to new users, we will create a simple user interface and host it online. Using the Rappture development tool, a menu driven graphical user …
Exploring The Effect Of Sample Properties On Spark-Induced Breakdown Spectroscopy,
2015
Purdue University
Exploring The Effect Of Sample Properties On Spark-Induced Breakdown Spectroscopy, Michael J. Marino, Payson Dieffenbach, Liesl A. Krause, Prasoon Diwakar, Ahmed Hassanein
The Summer Undergraduate Research Fellowship (SURF) Symposium
Optical emission spectroscopy techniques such as laser-induced breakdown spectroscopy (LIBS) and spark-induced breakdown spectroscopy (SIBS) provide portable and robust methods for elemental detection in real-time. Laser-produced emissions are then used for quantitative and qualitative analysis of a sample material with applications in explosives detection. For both techniques, the main obstacles have always been signal intensity, accuracy, and sensitivity of detection. The main advantage of the SIBS method is more safe operation, while still maintaining the portability of the technique. In this study, detailed characterization of spark induced plasma, analyte emission intensity, plasma temperature, electron density, and plasma persistence has been …
Fracture Mechanics-Based Simulation Of Pv Module Delamination,
2015
Texas A & M University - College Station
Fracture Mechanics-Based Simulation Of Pv Module Delamination, Dominic I. Jarecki, Johanna B. Palsdottir, Peter Bermel, Marisol Koslowski
The Summer Undergraduate Research Fellowship (SURF) Symposium
Photovoltaic (PV) cells are rapidly growing as a renewable alternative to fossil fuels like coal, oil, and natural gas. However, greater adoption has also reduced government subsidies, placing the onus of making solar panels economically competitive on innovative research. While multiple methods have been considered for reducing costs, with each reduction in cost comes the associated peril of reduction in quality and useful lifetime. Several problems considered solved have now resurfaced as potential failure mechanisms with the introduction of cheaper PV cell technologies. However, to remain economically viable, PV modules will not only have to become cheaper, they will have …
Examining The Hydration And Mechanical Properties Of Cement Paste Containing Cellulose Nanocrystals,
2015
San Jose State University
Examining The Hydration And Mechanical Properties Of Cement Paste Containing Cellulose Nanocrystals, Yvette Valadez-Carranza, Charles Y. Chiu, W. Jason Weiss, Pablo Zavattieri, Jeffrey P. Youngblood
The Summer Undergraduate Research Fellowship (SURF) Symposium
Cellulose nanocrystals (CNCs) are a nano-scaled particulae material that has been shown to improve strength in cementitious pastes. One advantage of CNCs compared to other nano-materials is that CNCs are renewable and sustainable. The objective of this investigation is to investigate the influence of additional alkali content on the behavior of CNCs in cement paste. This work evaluates flexural and compressive strength as a function of heat of hydration—which measures the extent of reaction. Previous mechanical tests on cement paste containing cellulose nanocrystals (CNCs) have shown CNCs to improve the flexural strength of cement paste by approximately 30%. Isothermal calorimetry …
Towards An Optical In-Line Characterization Of Nano Petals,
2015
Purdue University
Towards An Optical In-Line Characterization Of Nano Petals, Yiming Ding, Huisung Kim, Euiwon Bae
The Summer Undergraduate Research Fellowship (SURF) Symposium
Carbon Nano Petals (i.e. CNPs) are cantilevered multilayer grapheme sheets that are seeded from core graphite fibers. The resulting structure offers a possibility of minimizing interfacial losses in transport application, improved interactions with surrounding matrix materials in composites, and a route toward substrate independence for device applications. The mass production of CNPs on the substrate required a method that can provide synchronous feedback on the sample status without pulling them out of the production line. Different optical properties can be observed when surfaces with different roughness are illuminated with a highly coherent light such as a laser beam. Similarly, CNPs …
Adsorption Mechanisms Of Palladium On The Tobacco Mosaic Virus Surface,
2015
Purdue University
Adsorption Mechanisms Of Palladium On The Tobacco Mosaic Virus Surface, Gloriia D. Novikova, Oluwamayowa Adigun, Erin Retzlaff-Roberts, Michael T. Harris
The Summer Undergraduate Research Fellowship (SURF) Symposium
Organic-inorganic materials synthesis using biological templates has recently drawn immense attention of researchers. Biotemplating has shown to be an efficient and economic means of nanomaterials production. Naturally stable, readily available and genetically malleable, Tobacco Mosaic Virus (TMV) is one of the most extensively studied and characterized biotemplates. Particularly, templated synthesis using TMV has produced high quality nanorods and nanowires that have been applied to batteries, memory devices and catalysis. The fundamental mechanisms, governing the adsorption of palladium on the TMV Wild Type and genetically modified versions (TMV1Cys and TMV2Cys), are not fully understood; this knowledge, however, is essential for future …
Synthesis, Characterization, And Thermoelectric Properties Of Radical Siloxanes,
2015
Georgia Institute of Technology - Main Campus
Synthesis, Characterization, And Thermoelectric Properties Of Radical Siloxanes, Arnold J. Eng, Bryan Boudouris, Edward P. Tomlinson, Martha Emily Hay
The Summer Undergraduate Research Fellowship (SURF) Symposium
More than half of the annual energy consumption in the United States is lost as waste heat. Polymer-based thermoelectric devices have the potential to utilize this waste heat both sustainably and cost-effectively. Although conjugated polymers currently dominate research in organic thermoelectrics, the potential of using polymers with radical pendant groups have yet to be realized. These polymers have been found to be as conductive as pristine (i.e., not doped) poly(3-hexylthiophene) (P3HT), a commonly-used charge-transporting conjugated polymer. This could yield promising avenues for thermoelectric material design as radical polymers are more synthetically tunable and are hypothesized to have a high Seebeck …
Membrane Pre-Treatment Using Chemical Disinfectants In Halide Impaired Waters,
2015
Purdue University
Membrane Pre-Treatment Using Chemical Disinfectants In Halide Impaired Waters, Holly M. Haflich, Kun Huang, Amisha D. Shah, John Howarter, Logan Kearney
The Summer Undergraduate Research Fellowship (SURF) Symposium
The use of membrane filtration processes for desalination, water reuse, and water reclamation techniques are becoming more prevalent given freshwater shortages. However, the treatment of these waters is challenging because of the membranes used in these processes. During nanofiltration and reverse osmosis the membranes undergo biofouling. Reverse osmosis and nanofiltration are high-pressure membrane filtration techniques that treat seawater, brackish waters, and industrial wastewaters. Because of the biofouling, the polyamide thin film needs to be pretreated with chlorine (HOCl/ OCl-) as a disinfectant, but this damages the polyamide membrane. When the free chlorine is in the presence of halide-impaired waters, it …
Thermal And Mechanical Properties Of Polymers Using Molecular Dynamics,
2015
Purdue University
Thermal And Mechanical Properties Of Polymers Using Molecular Dynamics, Daniel Glass, Alejandro Strachan, Lorena Alzate-Vargas, Chunyu Li, Benjamin Haley
The Summer Undergraduate Research Fellowship (SURF) Symposium
Polymer systems have gained attention during the past years because of their technological and industrial applications. Simulations, particularly molecular dynamics, are very useful for exploring properties of amorphous polymers, without using experiments. Our goal is to create a readily-available tool that will perform MD simulations in order to get thermal and mechanical properties (Glass transition temperature, Young Modulus) of the polymers. The work that has been done will be part of a tool to help people to learn about polymer properties including Glass Transition Temperature. We model some polymers at a scale of 10,000 atoms. The tool uses LAMMPS to …
Nanomechanics Simulation Toolkit - Dislocations Make Or Break Materials,
2015
University of North Carolina at Chapel Hill
Nanomechanics Simulation Toolkit - Dislocations Make Or Break Materials, Michael N. Sakano, Alejandro Strachan, David Johnson, Mitchell Wood
The Summer Undergraduate Research Fellowship (SURF) Symposium
The goal of computational material science is to improve existing materials and design new ones through mathematical calculations. In particular, molecular dynamic simulations can allow for visualization of dislocations in a material, along with its resulting behavior when under stress. For example, plastic deformation and strain hardening result from the movement, multiplication and interaction of dislocations within the crystal structure. A simulation tool to study these phenomena was developed for the nanoHUB web resource as a part of the Network for Computational Nanotechnology at Purdue University and targets audiences ranging from undergraduate students to researchers. We created a user-friendly environment …
Freeze-Drying Silica Based Aerogels Using Cryoprotectants And Eutectic Solvent Mixtures,
2015
Purdue University
Freeze-Drying Silica Based Aerogels Using Cryoprotectants And Eutectic Solvent Mixtures, Alyssa R. Bass, Shane Peng, Jeffrey Youngblood
The Summer Undergraduate Research Fellowship (SURF) Symposium
Silica based aerogels have unique properties, including good thermal insulation and convective inhibition. A sol-gel process can be used to produce semi-opaque, monolithic gels, which can then be dried to produce aerogels. Multiple drying methods are available industrially, however, these methods require high temperatures and pressures, specialized equipment, and are time consuming. This project aims to experimentally study the possibility of a new method for drying wet gels through a freeze-drying process, with the use of cryoprotectants, eutectics, and polymers to inhibit and control ice formation and growth during drying. Silica wet gels were produced using tetraethylorthosilicate (TEOS), ethanol, water, …
Open-Source Photometric System For Enzymatic Nitrate Quantification,
2015
Michigan Technological University
Open-Source Photometric System For Enzymatic Nitrate Quantification, Ben T. Wittbrodt, D. A. Squires, J. Walbeck, E. Campbell, W. H. Campbell, Joshua M. Pearce
Department of Materials Science and Engineering Publications
Nitrate, the most oxidized form of nitrogen, is regulated to protect people and animals from harmful levels as there is a large over abundance due to anthropogenic factors. Widespread field testing for nitrate could begin to address the nitrate pollution problem, however, the Cadmium Reduction Method, the leading certified method to detect and quantify nitrate, demands the use of a toxic heavy metal. An alternative, the recently proposed Environmental Protection Agency Nitrate Reductase Nitrate-Nitrogen Analysis Method, eliminates this problem but requires an expensive proprietary spectrophotometer. The development of an inexpensive portable, handheld photometer will greatly expedite field nitrate analysis to …
Application Of Fiscal Incentives For Development Of East Natuna Gas Field For Long-Term National Natural Gas Demand,
2015
Department of Chemical Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
Application Of Fiscal Incentives For Development Of East Natuna Gas Field For Long-Term National Natural Gas Demand, Marwan Batubara, Widodo Wahyu Purwanto, Akhmad Fauzi
Makara Journal of Technology
East Natuna gas field, which has proven reserves of 46 trillion cubic feet, is projected to meet long-term natural gas needs. However, CO2-content of the gas reserves reaches 71%, leading to expensive development costs. This research investigates the feasibility of the field based on several fiscal incentives. Firstly, gas supply-demand until year 2040 was analyzed. Then, based on the analysis, the field was developed using high CO2 gas separation technology to produce gas of 1300 MMSCFD in 2023, 2600 MMSCFD in 2031, and 3900 MMSCFD in 2039. Finally, the economic feasibility was assessed using cash flow analysis in accordance with …
Thermodynamic Analysis Of Irreversible Heat-Transformers,
2015
Department of Applied Mechanics and Aerospace Engineering, Waseda University, 3-4-1 Okubo, 4 Shinjuku-ku, Tokyo 169-8555, Japan
Thermodynamic Analysis Of Irreversible Heat-Transformers, Niccolo` Giannetti, Arnas Arnas, Andrea Rocchetti, Kiyoshi Saito
Makara Journal of Technology
Absorption heat transformers extend the possibilities for efficient and environment-friendly energy conversion processes. Based on a general thermodynamic model of three-thermal cycles with finite thermal capacity of the heat sources, this paper is intent upon analyzing and optimizing the performance of absorption heat transformers, by including the influence of irreversibility in the analytical expression of the system efficiency. Dimensionless parameters for an overall optimization are defined and a first screening is performed to clarify their influence. Dependence on the main factors is highlighted to suggest how to change them in order to enhance the whole system performance. Under this point …
A New Method For Simulating Power Flow Density Focused By A Silicon Lens Antenna Irradiated With Linearly Polarized Thz Wave,
2015
Graduate School of Science and Technology, Shizuoka University, 3-5-1 Johoku, Nakaku, Hamamatsu 432-8011, Japan
A New Method For Simulating Power Flow Density Focused By A Silicon Lens Antenna Irradiated With Linearly Polarized Thz Wave, Catur Apriono, Eko Tjipto Rahardjo, Norihisa Hiromoto
Makara Journal of Technology
A terahertz system uses dielectric lens antennas for focusing and collimating beams of terahertz wave radiation. Linearly polarized terahertz wave radiation has been widely applied in the terahertz system. Therefore, an accurate method for analyzing the power flow density in the dielectric lens antenna irradiated with the linearly polarized terahertz wave radiation is important to design the terahertz systems. In optics, ray-tracing method has been used to calculate the power flow density by a number density of rays. In this study, we propose a method of ray-tracing combined with Fresnel’s transmission, including transmittance and polarization of the terahertz wave radiation …
High Temperature Corrosion Of Aluminized Aisi 4130 Steel With The Different Composition Of Nacl/Na2so4 Deposits,
2015
Department of Mechanical Engineering, Faculty of Engineering, Universitas Lampung, Bandar Lampung 35145, Indonesia
High Temperature Corrosion Of Aluminized Aisi 4130 Steel With The Different Composition Of Nacl/Na2so4 Deposits, Mohammad Badaruddin, Chaur Jeng Wang, Yudhistyra Saputra, Abu Khalid Rivai
Makara Journal of Technology
The high temperature corrosion of AISI 4130 steel can be increased by hot-dip aluminizing coating. The aluminized steel specimens with the deposit composition of 100/0, 30/70, 50/50, 70/30, and 0/100 (wt.%) NaCl/Na2SO4 were oxidized at 750 °C for 1-49 h periods. According to a parabolic rate constant (kp) value, the aluminized steel with deposit composition of 70/30 NaCl/Na2SO4 shows the highest kp value (3.71 × 10-11 g2cm- 4s-1), later followed by the kp value of 3.35 × 10-11 g2cm-4s-1 for 100/0 and the lowest kp value is 7.731 × 10-12 g2cm-4s-1 for 0/100. Whereas, the kp value for the aluminized …
Effects Of Supplier-Manufacturer Relationships On Supply-Chain Performance Of Manufacturing Industries In Indonesia,
2015
Department of Industrial Engineering, Universitas Trunojoyo Madura, Kamal Bangkalan 69162, Indonesia
Effects Of Supplier-Manufacturer Relationships On Supply-Chain Performance Of Manufacturing Industries In Indonesia, Rachmad Hidayat, Khisbullah Hudha, Sabarudin Akhmad
Makara Journal of Technology
The present study describes the relationships between commitment, communication, satisfaction, trust, relationship quality with suppliers, and supply-chain performance. The population of the study was manufacturing companies in Indonesia. Respondents were the chief executive officers or corporate secretaries or the designated managers involved in strategic decision making. Samples were taken by using a proportional area random sampling technique. Structural Equation Modeling (SEM) was used for analysis. Results of both direct and indirect testing of hypothesis indicated two hypotheses of positive and significant effects and nine hypotheses of positive but insignificant effects. Those hypotheses of positive and significant effects were the direct …
Stochastic Optimization Of Supply Chain Risk Measures –A Methodology For Improving Supply Security Of Subsidized Fuel Oil In Indonesia,
2015
Department of Chemical Engineering, Faculty of Engineering, University of Indonesia, Depok 16424, Indonesia
Stochastic Optimization Of Supply Chain Risk Measures –A Methodology For Improving Supply Security Of Subsidized Fuel Oil In Indonesia, Adinda Yuanita, Andi Noorsaman Sommeng, Anondho Wijonarko
Makara Journal of Technology
Monte Carlo simulation-based methods for stochastic optimization of risk measures is required to solve complex problems in supply security of subsidized fuel oil in Indonesia. In order to overcome constraints in distribution of subsidized fuel in Indonesia, which has the fourth largest population in the world—more than 250,000,000 people with 66.5% of productive population, and has more than 17,000 islands with its population centered around the nation's capital only—it is necessary to have a measurable and integrated risk analysis with monitoring system for the purpose of supply security of subsidized fuel. In consideration of this complex issue, uncertainty and probability …
Transmission Electron Microscopy Characterization Of High-Temperatur Oxidation Of Fe-20cr-5al Alloy Prepared By Focused Ion Beam Technique,
2015
Center for Science and Technology of Advanced Materials – National Nuclear Energy Agency (PSTBM-BATAN) PUSPIPTEK Serpong, Tangerang 15314, Indonesia
Transmission Electron Microscopy Characterization Of High-Temperatur Oxidation Of Fe-20cr-5al Alloy Prepared By Focused Ion Beam Technique, Mohammad Dani, Pudji Untoro, Teguh Yulius Surya Panca Putra, Parikin Parikin, Joachim Mayer, Arbi Dimyati
Makara Journal of Technology
The Focused Ion Beam (FIB) technique was applied for cross section preparation of the oxidized alloy for Transmission Electron Microscopy (TEM) study. Prior to preparation, the specimens of Fe-20Cr-5Al alloy sheet were oxidized in air at 1200 oC for 2 minutes, 10 minutes, 2 hours, and 100 hours. The microstructure and elemental composition of the samples were characterized using TEM equipped with an Energy Dispersive X-Ray Spectroscopy (EDX). The Electron Energy Loss Spectroscopy (EELS) was used to determine of the light elements. The TEM investigation reveals remarkable microstructure evolution of the specimens during oxidation which generally exhibit a typical multi-layer …
Comparison Of Beta Backscatter And X-Ray Fluorescence Methods To Measure Coating Thickness,
2015
Rutgers University - New Brunswick/Piscataway
Comparison Of Beta Backscatter And X-Ray Fluorescence Methods To Measure Coating Thickness, Sergio Palomo, Bernice Mills
STAR Program Research Presentations
This work compares and assesses the effectiveness of beta backscatter (BB) and x-ray fluorescence (XRF) for measuring the thickness of gold coatings on two substrates: silicon and an iron-nickel alloy. A set of samples of known gold coating thickness, ranging from 0.5 – 4.0 microns, was measured in each case along with the substrate alone. In BB the number of electrons (beta particles from a very small radioactive source, Pm-147 in this case) backscattered from a sample in a fixed time period is counted. The XRF method uses x-rays generated in the sample from a primary x-ray beam of higher …
