Electrochemical Performance Of Crystalline Li12Si7 As Anode Material For Lithium Ion Battery,
2016
State Key Laboratory of Silicon Materials, Key Laboratory of Advanced Materials and Applications for Batteries of Zhejiang Province and School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China;
Electrochemical Performance Of Crystalline Li12Si7 As Anode Material For Lithium Ion Battery, Ya-Xiong Yang, Rui-Jun Ma, Ming-Xia Gao, Hong-Ge Pan, Yong-Feng Liu
Journal of Electrochemistry
Crystalline Li12Si7 is successfully synthesized by heating the mixture of LiH and Si with a molar ratio of 12:7, which avoids the huge difference of the melting points between Li and Si. The electrochemical performance and lithium storage mechanism of the as-prepared Li12Si7 are studied in this work. It is found that only a change in cell volume takes place without a phase change during the lithiation/delithiation of Li12Si7 at a voltage range of 0.02 ~ 0.6 V, exhibiting a solid-solution lithium storage mechanism. Such a lithium storage process effectively retards the volume effect …
Enhanced Metallic Properties Of Srruo3 Thin Films Via Kinetically Controlled Pulsed Laser Epitaxy,
2016
University of Kentucky
Enhanced Metallic Properties Of Srruo3 Thin Films Via Kinetically Controlled Pulsed Laser Epitaxy, Justin K. Thompson, J. Nichols, S. Lee, S. Ryee, John H. Gruenewald, John G. Connell, Maryam Souri, J. M. Johnson, J. Hwang, M. J. Han, H. N. Lee, D. -W. Kim, Sung S. Ambrose Seo
Physics and Astronomy Faculty Publications
Metal electrodes are a universal element of all electronic devices. Conducting SrRuO3 (SRO) epitaxial thin films have been extensively used as electrodes in complex-oxide heterostructures due to good lattice mismatches with perovskite substrates. However, when compared to SRO single crystals, SRO thin films have shown reduced conductivity and Curie temperatures (TC), which can lead to higher Joule heating and energy loss in the devices. Here, we report that high-quality SRO thin films can be synthesized by controlling the plume dynamics and growth rate of pulsed laser epitaxy (PLE) with real-time optical spectroscopic monitoring. The SRO thin …
Effect Of Preparation Technology On Arc Erosion Resistance Of Mgo/Cu Contact Materials,
2016
Henan University of Science and Technology
Effect Of Preparation Technology On Arc Erosion Resistance Of Mgo/Cu Contact Materials, Xiuhua Guo, Kexing Song, Yanmin Zhang, Xuebin Zhang, Jianxin Gao
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Thermodynamic Calculation Of The Liquidus Surface Projection Of Multi-Component Aluminum Alloys,
2016
Advanced Materials Institute, Shandong Academy of Sciences
Thermodynamic Calculation Of The Liquidus Surface Projection Of Multi-Component Aluminum Alloys, Jingrui Zhao, Yong Du, Lijun Zhang, Jixue Zhou, Yuansheng Yang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
A356 Aluminum Alloy, Grain Refining, Modification, Microstructure, Mechanical Properties,
2016
Hanyang University
A356 Aluminum Alloy, Grain Refining, Modification, Microstructure, Mechanical Properties, Jonghun Yoon
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
A Molecular Dynamics Study Of Activated Tungsten Inert Gas Welding Process,
2016
Dalian Jiaotong University
A Molecular Dynamics Study Of Activated Tungsten Inert Gas Welding Process, Cheng Jin, Hanchen Huang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Effect Of Thickness Of Anode Functional Layer On Electrochemical Performance Of Ni-Ce0.8gd0.2o1.9 Anode-Supported Solid Oxide Fuel Cells,
2016
Fuzhou University
Effect Of Thickness Of Anode Functional Layer On Electrochemical Performance Of Ni-Ce0.8gd0.2o1.9 Anode-Supported Solid Oxide Fuel Cells, Xueping Guo, Kaiping Peng, Chan Zheng, Wei Li, Wenzhe Chen
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Study On Impact And Friction Properties Of Za45si3cu Alloy,
2016
Baise University
Study On Impact And Friction Properties Of Za45si3cu Alloy, Weihe Shi
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Modelling The Evaporation Of Aluminum In Ti–6al–4v Alloy Melted With Electron Beam And Laser,
2016
Harbin Institute of Technology
Modelling The Evaporation Of Aluminum In Ti–6al–4v Alloy Melted With Electron Beam And Laser, Xuan Wang, Liang Wang, Liang S. Luo, Yan Q. Su, Xin Z. Li, Rui R. Chen, Jing J. Guo, Heng Z. Fu
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Study On Criterion Of Fabricating Columnar Dendrite Structure Dz466 Superalloy Based On Lmc Process,
2016
Shenyang Research Institute of Foundry
Study On Criterion Of Fabricating Columnar Dendrite Structure Dz466 Superalloy Based On Lmc Process, Xun Sun
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Experimental Investigation On Recovery Of Fe-Ni Alloy From Bayer Red Mud And Laterite Nickel,
2016
Guangxi Institute of Metallurgy
Experimental Investigation On Recovery Of Fe-Ni Alloy From Bayer Red Mud And Laterite Nickel, Aoping He, Chen Liu, Jianmin Zeng
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Microstructures And Properties Of Sintered Cu–Mos2/Cu Functional Gradient Materials,
2016
Henan University of Science and Technology
Microstructures And Properties Of Sintered Cu–Mos2/Cu Functional Gradient Materials, Aiqin Wang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
(Alpha + Gamma) Ultrafine Duplex Structure Formation In Twophase Stainless Steel By High-Pressure Torsion And Annealing,
2016
Ritsumeikan University
(Alpha + Gamma) Ultrafine Duplex Structure Formation In Twophase Stainless Steel By High-Pressure Torsion And Annealing, Mie Ota, Kei Ameyama, Daiki Nanya, Sanjay Kumar Vajpai
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Study On The Impact Abrasive Wear Of New Super-High Manganese Steel,
2016
Henan University of Science and Technology
Study On The Impact Abrasive Wear Of New Super-High Manganese Steel, Wenyan Wang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Simulation Of Superplastic Forming Of Circular Edge-Welded Envelopes,
2016
Ufa State University of Oil & Petroleum
Simulation Of Superplastic Forming Of Circular Edge-Welded Envelopes, Olga Tulupova
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Constitutive Equation Of Compression For 38mnv Micro-Alloyed Steel,
2016
Shanghai Research Institute of Materials; Guangxi University
Constitutive Equation Of Compression For 38mnv Micro-Alloyed Steel, Jun Hu, Jianmin Zeng
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Numerical Modeling And Seismic Assessment Of Smart Isolation System For High-Speed Railway Rc Bridge Subjected To Near-Field Ground Motions,
2016
Yangzhou University
Numerical Modeling And Seismic Assessment Of Smart Isolation System For High-Speed Railway Rc Bridge Subjected To Near-Field Ground Motions, Lingkun Chen
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Modelling The Softening Behaviour During Galvanizing Of Various Steel Grades,
2016
University of Pretoria
Modelling The Softening Behaviour During Galvanizing Of Various Steel Grades, Kevin Banks, Rorisang Maubane, Thabang Makwena
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Characterization Of Thermal Deformation Behavior Of A Novel Tial Alloy,
2016
Harbin Institute of Technology
Characterization Of Thermal Deformation Behavior Of A Novel Tial Alloy, Xiaopeng Wang, Fantao Kong, Qin Su, Yu Zhang, Yuyong Chen
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Effects Of Deformation On Recrystallization Of The Wear-Resistant Steel,
2016
Tangshan College
Effects Of Deformation On Recrystallization Of The Wear-Resistant Steel, Chun Wang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
