Materials Science and Engineering Commons^™

Preparations And Electrochemical Performances Of Carbon Coated Silicon/Graphite Composites, Tian-Yi Gao, Zheng-Liang Gong

Journal of Electrochemistry

In this work, the carbon coated silicon (Si@C) composite materials were synthesized based on the industrial silicon powder (600 meshes) via a high energy ball milling combing with in-situ carbon coating (carbonization) method. The Si@C/graphite (Si/C) composite anode materials were prepared by a simple mechanical ball-milling approach. The effects of carbon coating and the ratio of Si to graphite on electrochemical performances of Si/graphite composite materials were investigated systematically. Compared with the nano-Si/graphite composites, the Si/C composites showed higher reversible capacity, better rate capability and cycle performance. The Si@C materials composited of amorphous carbon and crystal silicon with the primary …

Carbon Composite Fe3O4 Nanoparticles Based Electrochemical Sensor For Hydrogen Peroxide Detection, Si-Yu Zhang, Hui-Juan Wang, Shu-Fang Li, Jian-Ying Qu

Journal of Electrochemistry

In this work, a novel hydrogen peroxide electrochemical sensor was constructed with ferroferric oxide (Fe₃O₄) magnetic nanoparticles, which demonstrated good electrocatalytic activity for hydrogen peroxide. There existed a good linear relationship between the concentration of hydrogen peroxide and the oxidation peak current in the range of 1.00 × 10^-6 ~ 1.00 × 10^-3 mol·L^-1 (R = 0.9980) with the detection limit of 6.60 × 10-7 mol·L^-1. The sensor exhibited good anti-interference ability, high reproducibility and stability.

Simulation Of Fractal Growth On Metal Wire Electrode, Li-Feng Ding, Pei-Yuan Mao, Jun Cheng, Yu-Lan Niu, Yu-Hao Wen, Wei Chen

Journal of Electrochemistry

During processes of metal electrodepostion, there exist many complex morphological forms such as dendritic growing in the cathode deposited metal edge, which will seriously affect the quality of the electrodeposited product and current efficiency during machining. Investigations on dendritic crystal growing process and morphology could help controlling growth of electrolysis precipitate. In this work, Python and Matlab softwares were used, and the model of parallel electrode electrodeposition was established based on the diffusion-limited aggregation (DLA) model. By analyzing the law of fractal growth at different conditions of the particles number, probability, electrode spacing, the movement step length and orientation drift, …

Lead Modified Nanoporous Platinum Electro-Catalysts For Formic Acid Oxidation, Yuan-Yuan Zhang, Qing-Feng Yi, Ge-Kun-Kun Zuo, Tao Zou, Xiao-Ping Liu, Xiu-Lin Zhou

Journal of Electrochemistry

Platinum (Pt) catalysts modified by other suitable metals significantly enhance their electrochemical activities for formic acid oxidation. In this work, a titanium-supported nanoporous network platinum (nanoPt/Ti) electrode was prepared using a hydrothermal method. The as-prepared nanoPt/Ti electrode was modified with a certain amount of lead by using cyclic voltammetry for different scan cycle numbers (n), namely, n = 10, 15, 20 and 30, to synthesize the novel lead-modified nanoporous Pt (nanoPb_(n)-Pt/Ti) electrodes. Electro-oxidation of formic acid on these electrodes was studied with cyclic voltammetry (CV), chronoamperometry and chronopotentiometry in sulfuric acid solution. CV curves showed that both nanoPt/Ti …

Imaging The Three-Dimensional Orientation And Rotational Mobility Of Fluorescent Emitters Using The Tri-Spot Point Spread Function, Oumeng Zhang, Jin Lu, Tianben Ding, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Fluorescence photons emitted by single molecules contain rich information regarding their rotational motions, but adapting single-molecule localization microscopy (SMLM) to measure their orientations and rotational mobilities with high precision remains a challenge. Inspired by dipole radiation patterns, we design and implement a Tri-spot point spread function (PSF) that simultaneously measures the three-dimensional orientation and the rotational mobility of dipole-like emitters across a large field of view. We show that the orientation measurements done using the Tri-spot PSF are sufficiently accurate to correct the anisotropy-based localization bias, from 30 nm to 7 nm, in SMLM. We further characterize the emission anisotropy …

Modeling Recombination In Solar Cells, Paul Chery

Macalester Journal of Physics and Astronomy

Solar cells are a competitive alternative to nonrenewable energy sources such as fossil fuels. However, the efficiency of these devices is limited by photogenerated carrier recombination. We use a finite difference numerical model to study recombination phenomena in the absorber layer of solar cells including alternate recombination models and the effects of spatial distribution of recombination centers. We compare the effect of using the constant lifetime approximation for recombination to the full Shockley-Read-Hall expression in Silicon solar cells and find that the constant lifetime approximation holds for high defect densities but not for high photon flux densities. Finally, we simulate …

Feco2o4 As An Anode Material For Lithium Ion Batteries, Chelsea Wong

The International Student Science Fair 2018

Lithium ion batteries (LIBs) are commonly found in many portable electronic appliances due to their ability to be rechargeable. Currently, commercial anodes in Li-ion batteries (graphite) have a theoretical capacity of around 372 mAh/g, while FeCo2O4 that will be investigated as the anode material has a theoretical capacity of 901.985mAh/g, more than double of the current commercial anode’s capacity. Earlier work done by Sharma et al also showed that FeCo2O4 has a very promising initial capacity of 827mAh/g. As such, the engineering goal is to produce a battery that will have a higher capacity than the current commercial Li-ion batteries …

Microstructural Characterization Of Shear Transformation Zones And Modeling Indentation Size Effect In Amorphous Polymers, Leila Malekmotiei

LSU Doctoral Dissertations

The first aim of this work is developing a procedure for experimental and analytical characterization of nano-scale microstructures which mediate large scale deformation in amorphous polymers. Glassy polymers are extensively used as high impact resistant, low density, and clear materials in industries. Nevertheless, their response under severe loading conditions is yet to be appropriately unraveled. Due to the lack of long-range order in the microstructures of glassy solids, their plastic deformation is different from that in crystalline solids. Shear Transformation Zones (STZs) are believed to be the main plasticity carriers in amorphous solids and defined as the localized atomic or …

Glucosamine From Hydrolysis Of 3d Printing Chitosan For Osteoarthritis Treatment, Ruj Dansriboon, Laphon Premcharoen

The International Student Science Fair 2018

This project aims to introduce a new way for osteoarthritis treatment which is expected to increase in the future. Glucosamine is the main subject for a treatment, which can be derived by hydrolyzing chitosan. This project also includes extraction of chitosan from shrimp waste to make a worthy use of food waste from industry. In this project, 3D printer is applied to print chitosan gel since 3D printing is adjustable to form various shapes of the gel.

The research process begins with the extraction of chitosan from shrimp shells. For the next step, the percent of deacetylation of chitosan was …

The Redshirt In Engineering Consortium: Progress And Early Insights, Janet Callahan, Donna C. Llewellyn, Ann E. Delaney

Materials Science and Engineering Faculty Publications and Presentations

The NSF-funded Redshirt in Engineering Consortium was formed in 2016 with the goal of enhancing the ability of academically talented but underprepared students coming from lowincome backgrounds to successfully graduate with engineering degrees. The Consortium takes its name from the practice of redshirting in college athletics, with the idea of providing an extra year and support to help promising engineering students complete a bachelor’s degree. The Consortium builds on the success of three existing “academic redshirt” programs and expands the model to three new schools. The Existing Redshirt Institutions (ERIs) help mentor and train the new Student Success Partners (SSPs), …

Panel Discussion On The History Of The Women In Engineering Division: Reflections From Past Chairs Of The Division, Beena Sukumaran, Janet Callahan, Donna C. Llewellyn, Beth M. Holloway, Noel N. Schulz, Sarah A. Rajala, Donna Reese

Materials Science and Engineering Faculty Publications and Presentations

In celebration of 125 years of the American Society of Engineering Education, past Chairs of the Women in Engineering Division (WIED), Beth Holloway, Donna Llewellyn, Sarah Rajala, and Noel Schulz convened in a focused panel that looked back through the division’s history. To help archive the historical perspective of these leaders, this paper was developed to help the former Chairs focus their perspectives with guiding questions. One additional chair, who could not attend the conference, Donna Reese participated in this paper. The guiding questions for chairs concerned: the influence of their leadership of the WIED on their career, their perspective …

Encouraging A Growth Mindset In Engineering Students, Megan Frary

Materials Science and Engineering Faculty Publications and Presentations

A person’s “mindset” guides a great deal of how one approaches life -- and especially how students approach education. While someone with a fixed mindset believes that their intelligence is fixed and unchangeable, someone with a growth mindset believes that their intelligence is changeable and can grow as they learn more. Most people’s mindset lies along a spectrum with these two extremes at either end. In addition to other outcomes, the mindset that a person has determines how they interpret mistakes they make; whereas someone with a fixed mindset thinks mistakes result from their innate lack of ability, someone with …

Work In Progress: Flexibility And Professional Preparation Via A Multidisciplinary Engineering Curriculum, Noah Salzman, Vicki Stieha, Amy J. Moll, Joann S. Lighty

Materials Science and Engineering Faculty Publications and Presentations

This paper reports on one institution’s work-in-progress to build innovation and creativity into a flexible, ABET accredited undergraduate Engineering B.S. degree that provides a variety of choices to undergraduate engineering students. The new Engineering Plus degree has a core set of required foundational courses in engineering, a multi-year design sequence, and allows for self-defined pathways. The new curriculum also offers three defined degree pathways that have been chosen based on an examination of student “fate” data: secondary education, pre-medical, and environmental studies, with additional pathways planned for the near future. The fate analysis examined the paths of students who were …

Work In Progress: Institutional Context And The Implementation Of The Redshirt In Engineering Model At Six Universities, Ann Delaney, Donna C. Llewellyn, Janet Callahan

Materials Science and Engineering Faculty Publications and Presentations

Low-income students are underrepresented in engineering and are more likely to struggle in engineering programs. Such students may be academically talented and perform well in high school, but may have relatively weak academic preparation for college compared to students who attended better-resourced schools. Four-year engineering and computer science curricula are designed for students who are calculus-ready, but many students who are eager to become engineers or computer scientists need additional time and support to succeed. The NSF-funded Redshirt in Engineering Consortium was formed in 2016 as a collaborative effort to build on the success of three existing “academic Redshirt” programs …

Valuing Women’S Contributions: Team Projects And Collaborative Writing, Jennifer C. Mallette, Harold Ackler

Materials Science and Engineering Faculty Publications and Presentations

Team projects offer opportunities for student engineers to learn how to work on a team and produce collaborative written reports. However, research has shown that women often do more writing during these projects, and that their writing labor is unrecognized or undervalued, particularly when the technical work is viewed as more essential. In this paper, we examine the results of a study focused on the writing component in a year-long senior capstone materials science and engineering (MSE) course sequence. This course requires students to complete projects for clients and produce a written report, among other deliverables. To focus more on …

De-Risking Transdisciplinary Research By Creating Shared Values, Donna C. Llewellyn, William L. Hughes

Materials Science and Engineering Faculty Publications and Presentations

This Lessons Learned Paper describes a yearlong faculty development pilot program that was designed to help a team of faculty de-risk their pursuit of wicked research problems. Wicked problems are extraordinarily difficult to solve due to their incomplete, contradictory, and at times changing requirements. They often include multiple stakeholders with competing interests and worldviews. As a result, they are risky by definition because they are difficult to fund, publish, and collaborate on. Presented here, a team of eleven faculty, from six different academic units, explored their personal and professional values during an initial off-site two and a half day retreat. …

The Crux: Promoting Success In Calculus Ii, Doug Bullock, Janet Callahan, Jocelyn B. S. Cullers

Materials Science and Engineering Faculty Publications and Presentations

In the 2013-14 school year, Boise State University (BSU) launched a major overhaul of Calculus I. The details of the reform, described elsewhere, involved both pedagogical and curricular changes. In subsequent years, we developed several assessment tools to measure the effects of the project on students’ grades and retention. The toolkit includes: (1) pass rate and GPA in Calculus I, (2) longitudinal analysis of pass rates and GPA in subsequent courses, (3) impact of Calculus I on retention in STEM and retention at BSU, (4) all of the above comparing students in reformed Calculus vs traditional Calculus, (5) all of …

Creep Of Hi-Nicalon™ S Ceramic Fiber Tows At 1100°C In Air And In Silicic Acid-Saturated Steam, Logan M. Gumucio

Theses and Dissertations

Innovations in SiC based ceramic matrix composites (CMCs) have yielded exceptional high-temperature properties and performance in aggressive oxidizing environments. These material characteristics provide potential avenues for future advancements in many applications where current metallic alloys perform near their operating temperature limits in a harsh environment. As steam (typically present in these environments) enters through cracks in the matrix of a SiC/SiC composite, it leaches Si and becomes saturated with silicic acid, Si(OH)₄, prior to attacking the reinforcing SiC fibers. Therefore, it is paramount that a thorough understanding of the performance and durability of SiC fibers be obtained under …

Proton Irradiation Effect On Thermoelectric Properties Of Nanostructured N-Type Half-Heusler Hf0.25Zr0.75Nisn0.99Sb0.01, Karthik Chinnathambi, Brian J. Jaques

Materials Science and Engineering Faculty Publications and Presentations

Thermoelectric properties of nanostructured half-Heusler Hf_0.25Zr_0.75NiSn_0.99Sb_0.01 were characterized before and after 2.5 MeV proton irradiation. A unique high-sensitivity scanning thermal microprobe was used to simultaneously map the irradiation effect on thermal conductivity and Seebeck coefficient with spatial resolution less than 2 μm. The thermal conductivity profile along the depth from the irradiated surface shows excellent agreement with the irradiation-induced damage profile from simulation. The Seebeck coefficient was unaffected while both electrical and thermal conductivities decreased by 24%, resulting in no change in thermoelectric figure of merit ZT. Reductions in thermal and …

Modeling And Simulation Of Mass Flow Of Steel Plate/Slab During Hot Rolling, X. Wang, S. Ganguly, K. Chandrashekhara, Mario F. Buchely, Semen Naumovich Lekakh, David C. Van Aken, Ronald J. O'Malley, D. Bai, Y. Wang, T. Natarajan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The ability to predict mass flow behavior during hot rolling is essential to product quality. In this study, viscoplastic models of the steels from SSAB and U.S. Steel were developed based on experimental stress-strain curves. A three-dimensional nonlinear finite element model was built to simulate a reverse plate hot rolling and a hot strip rolling process. For plate rolling, a seven pass schedule was simulated. The plastic strain distributions during rolling were investigated. The results show that the surface of the plate has larger plastic strain than the center. In the case of hot strip rolling, the simulation predicts that …