Materials Science and Engineering Commons^™

Investigation Of Membrane Based Processes For Biomedical Applications, Efecan Pakkaner

Graduate Theses and Dissertations

As substantial developments were achieved in nanotechnology and polymer engineering, especially in the last few decades, the use of membranes and membrane-based procedures was found to be expanding into more and more research and development areas; including biological engineering, life sciences and biomedical engineering. Not only have they been the main focus of meaningful research, but they have also been the main pieces of the solutions to very thorny problems encountered within a wide range of applications from microfluidics to water treatment, thanks to their versatility, cost-effectiveness and biocompatibility, when compared to conventional separation techniques. To celebrate and embrace these …

Optimization Of 3d Printed Mold Performance For Injection Molding Via Hollow Infill Patterns, Alan Fong

University Honors Theses

The applicability of hollow infill patterns has been explored for its applications in making 3D printed polymer-based injection molds in the additive manufacturing industry. Hollow infill patterns offer a significant reduction in material costs as well as the opportunity for reducing the cooling times via pumping a coolant fluid through the hollow cavity in a similar fashion to traditional conformal cooling channels. A 3D Jacks Support Hollow mold model was determined to be the best performing design. FEA analysis was conducted to determine the maximum reduction in internal volume (percentage of material saved) that could be achieved without exceeding the …

The Development Of Novel Carbohydrate-Based Gelators And Their Applications As Advanced Soft Materials, Joedian Morris

Chemistry & Biochemistry Theses & Dissertations

Low molecular weight gelators (LMWGs) are attractive molecules that have been explored extensively due to their practical applications in many disciplines. These small molecules self-assemble forming solid-like gels via three-dimensional cross-linked networks with the solvent as the key component within the matrix. Carbohydrate-based LMWGs are small molecules that can form solid-like gels in water, organic solvents, and aqueous solutions. They have great potential to be utilized in different applications because carbohydrates are biocompatible and can be made from easily accessible and renewable resources. Designing gelators is still a challenge within the field, even though researchers have developed tools to predict …

Direct Torque Control For Silicon Carbide Motor Drives, Mohammad Hazzaz Mahmud

Graduate Theses and Dissertations

Direct torque control (DTC) is an extensively used control method for motor drives due to its unique advantages, e.g., the fast dynamic response and the robustness against motor parameters variations, uncertainties, and external disturbances. Using higher switching frequency is generally required by DTC to reduce the torque ripples and decrease stator current total harmonic distortion (THD), which however can lower the drive efficiency. Through the use of the emerging silicon carbide (SiC) devices, which have lower switching losses compared to their silicon counterparts, it is feasible to achieve high efficiency and low torque ripple simultaneously for DTC drives.

To overcome …

Decoupling The Effects Of Interfacial Chemistry And Grain Size In Perovskite Stability, Mirra M. Rasmussen, Kyle M. Crowley, Miranda S. Gottlieb, Geneviève Sauvé, Ina T. Martin

Student Scholarship

No abstract provided.

Surface Energy And Microstructure: The Effect Of The Underlying Substrate On Perovskite Film Formation For Solar Cell Absorbers, Mirra M. Rasmussen, Kyle M. Crowley, Ina T. Martin

Student Scholarship

No abstract provided.

A Computational Study Of Radiation Damage In Bilayer Silicon-Gold Structures, Cameron Hopper

Graduate Theses and Dissertations

Irradiation from sources such as nuclear reactors bombard materials with neutrons and heavy ions. The primary consequence of this irradiation is the displacement of atoms from their atomic structure. As the structure becomes damaged, the mechanical properties can change. Eventually, this can result in a failure due to embrittlement. This type of damage is hard to detect and can result in sudden, unexpected failure. Therefore, focusing on managing the consequences of irradiation has been a heavily researched topic. To manage irradiation, the focus is primarily to manage the voids and interstitials that appear during irradiation. Grain boundaries and amorphous regions …

Fabrication And Characterization Of Photodetector Devices Based On Nanostructured Materials: Graphene And Colloidal Nanocrystals, Wafaa Gebril

Graduate Theses and Dissertations

Photodetectors are devices that capture light signals and convert them into electrical signals. High performance photodetectors are in demand in a variety of applications, such as optical communication, security, and environmental monitoring. Among many appealing nanomaterials for novel photodetection devices, graphene and semiconductor colloidal nanocrystals are promising candidates because of their desirable and unique properties compared to conventional materials.

Photodetector devices based on different types of nanostructured materials including graphene and colloidal nanocrystals were investigated. First, graphene layers were mechanically exfoliated and characterized for device fabrication. Self-powered few layers graphene phototransistors were studied. At zero drain voltage bias and room …

Electrochemical Deposition In Energy Storage Devices, Witness Atutala Martin

Graduate Theses and Dissertations

Metals, whether in a solid or soluble ion form, are a vital part of any electrochemical storage system. More so, Li metal is widely considered as the ideal anode because of its low density and low electrochemical potential (-3.04 V vs. the standard hydrogen electrode – SHE). However, just like most metals, it does not plate or strip evenly during cycling which can lead to cycling performance issues, short cycling lifespans, and even safety concerns brought about by dendrites that can cause internal short-circuiting within cells. This research focused on investigating the electroplating of metals in both aqueous and non-aqueous …

Numerical Calculation Of Losses Of Trapped Vortices Under Strong Rf Meissner Current And Dc Superheating Field In Type Ii Superconductors, Walive Pathiranage Manula Randhika Pathirana

Physics Theses & Dissertations

Research on the vortex dynamics and enhancing of superheating field in superconductors has attracted much attention in accelerator physics community to develop next-generation high-performance accelerator cavities. However, the extreme dynamics of curvilinear elastic vortices driven by very strong currents close to the depairing limit or superheating field of a superconductor with a nanostructured surface has not been well understood. We calculated the superheating field H_sh and critical momentum kc characterizing the wavelength of the instability λ_m of the Meissner state to flux penetration by solving numerically the Ginzburg-Landau equations. A bulk superconductor, superconductor with the inhomogeneous surface disorder …

Facile Fabrication And Characterization Of Kraft Lignin@Fe3o4 Nanocomposites Using Ph Driven Precipitation: Effects On Increasing Lignin Content, Frankie A. Petrie, Justin M. Gorham, Robert T. Busch, Serhiy O. Leontsev, Esteban E. Ureña-Benavides, Erick S. Vasquez

Chemical and Materials Engineering Faculty Publications

This work offers a facile fabrication method for lignin nanocomposites through the assembly of kraft lignin onto magnetic nanoparticles (Fe3O4) based on pH-driven precipitation, without needing organic solvents or lignin functionalization. Kraft lignin@Fe3O4 multicore nanocomposites fabrication proceeded using a simple, pH-driven precipitation technique. An alkaline solution for kraft lignin (pH 12) was rapidly injected into an aqueous-based Fe3O4 nanoparticle colloidal suspension (pH 7) under constant mixing conditions, allowing the fabrication of lignin magnetic nanocomposites. The effects of increasing lignin to initial Fe3O4 mass content (g/g), increasing in ratio from 1:1 to 20:1, are discussed with a complete chemical, structural, and …

Synthesis And Electrochemical Study Of Cuau Nanodendrites For Co2 Reduction, Dylan Siltamaki, Shuai Chen, Farnood Rahmati, Jacek Lipkowski, Ai-Cheng Chen

Journal of Electrochemistry

The conversion of carbon dioxide (CO₂) to carbon monoxide (CO) and other value-added products is an interesting approach for carbon-containing fuel synthesis using renewable and clean energy. The electrochemical reduction of CO₂ is one of the promising strategies for the storage of intermittent renewable energy resources. The development of electrocatalysts with high activity and stability is vital in the electrochemical CO₂ reduction process. In this study, copper and gold alloyed (CuAu) electrodes with nanodendritic structures were synthesized using a facile electrodeposition method. The CuAu nanodendrites with the atomic ratio of Cu to Au being approximately 1:1 …

Progress Of Lithium-Ion Transport Mechanism In Solid-State Electrolytes, Bing-Kai Zhang, Lu-Yi Yang, Shun-Ning Li, Feng Pan

Journal of Electrochemistry

Inorganic crystalline solid electrolytes exhibit exceptional room-temperature ionic conductivities, giving them the potential to enable all-solid-state lithium (Li) - ion batteries. Developing new high-performance electrolytes is one of the most critical challenges to realize solid-state batteries, which requires understanding how chemistry facilitates fast ionic conduction and what the Li-ion migration mechanism is in inorganic solid electrolytes. In this review, we aim to summarize recent fundamental research progress in Li-ion transport, including crystal structure, behavior of ion migration (i.e., single-ion jump and multi-ions cooperative migration), and the relationship between ion migration and microstructure.
Generally, ion transport in crystalline structure can be …

Preparation Of Co1-XS-Mns@Cnts/Cnfs For Electrocatalytic Oxygen Reduction Reaction, Fang-Yan Liu, Qian Zhang, Yue-Kun Li, Feng Huang, Meng-Ye Wang

Journal of Electrochemistry

As an important cathode reaction in fuel cells and metal-air batteries, oxygen reduction reaction (ORR) is a complex reaction of slow kinetics, which severely limits performances of fuel cells and metal-air batteries. Therefore, it is of key importance to find an efficient and stable electrocatalyst to promote ORR. Carbon-based materials, which possess high conductivity, good stability and large specific surface area, are usually used in electrocatalytic ORR. However, pure carbon-based materials exhibit low efficiency. Coupling carbon-based materials with manganese (Mn) and cobalt (Co) transition metals containing 3d orbitals is an effective way to improve electrocatalytic performance. Herein, carbon nanofibers containing …

Recent Advances In Glycerol Electrooxidation On Pt And Pd: From Reaction Mechanisms To Catalytic Materials, Wei-Yi Zhang, Xian-Yin Ma, Shou-Zhong Zou, Wen-Bin Cai

Journal of Electrochemistry

The conversion of glycerol to value-added products has received considerable attention recently because the booming biodiesel industry produces a large amount of glycerol as a byproduct. Among various means, electrocatalytic oxidation of glycerol is appealing owing to its environmental friendliness and high efficiency. However, electrooxidation of glycerol is very complex, involving multiple electron and proton transfer processes with many reaction pathways. How to rationally design catalysts with high selectivity toward targeted products is an overarching challenge, and of both fundamental and practical significance. In this minireview we aim to provide an overview of recent advancements in electrooxidation of glycerol focusing …

Research And Application Of Copper Electroplating In Interconnection Of Printed Circuit Board, Chong Wang, Chuan Peng, Jing Xiang, Yuan-Ming Chen, Wei He, Xin-Hong Su, Yu-Yao Luo

Journal of Electrochemistry

Copper electroplating is the key technology for manufacturing of integrated circuit, packaging substrate, printed circuit board, and other electronic interconnection components. However, the electrochemistry and mechanism of deposition growth have not been fully elucidated, and the development of additives and bath maintenance are inseparable from a large number of experiments. This article reviews recent fundamental research and application progress in copper electroplating for printed circuit board industry, and these works are mainly dedicated by the research group of Printed Circuit and Printed Electronics from University of Electronic Science and Technology of China. First of all, a brief history of copper …

Design And Fabrication Of The Electrolytic Cell With Silicon-Based Boron-Doped Diamond Electrode And Its Feasibility ForIn-Situ Nuclear Magnetic Resonance Study, Hao Peng, Hui-Jun Sun, Zhi-You Zhou, Lin-Fan Shen, Long Huang, Shuo-Hui Cao, Shi-Gang Sun

Journal of Electrochemistry

In-situ EC-NMR technique can be used to monitor the electrochemical reaction process in real-time and to explain the reaction mechanism at the molecular level, which is a promising and non-destructive online detection technology. This article for the first time reports the design and production of in-situEC-NMR three-electrode single-chamber electrolytic cell using silicon-based boron-doped diamond (Si/BDD) as the working electrode. Research shows that the geometric size of Si/BDD electrode being 12.5 mm 1.2 mm 0.5 mm in the NMR detection zone is small and the thickness of the electrode material is thin, which accounts for the less hindrance …

Corrosion Propagation Of Stainless Steel Reinforced Concrete, Nelly Sofía Orozco Martínez

USF Tampa Graduate Theses and Dissertations

Structural durability is a growing concern in global infrastructure. The infrastructure report card released by the American Society of Civil Engineers (ASCE) indicates that approximately 9.1% of the total bridges in the United States were structurally deficient in 2016. In addition, it suggests that about 40% of the total bridges in the country are now 50 years or older. This issue becomes even more critical in structures exposed to aggressive environments such as marine structures. Thus, federal and regional efforts are now being directed towards infrastructural durability improvement to improve the long-term cost-efficiency of civil infrastructure.

Corrosion prevention strategies may …

Atomistic Thermo-Mechanical Description Of The Deformation Behavior, Scaling Laws, And Constitutive Modeling Of Nanoporous Gold, Mohammed Hassan Yousef Saffarini

LSU Doctoral Dissertations

Metallic foams, or nanoporous (NP) metals as it is widely referred to in literature, with ligament sizes up to a few tens of nm show exceptional mechanical properties such as high strength and stiffness per weight ratio under different loading scenarios due to their high surface area to solid volume ratio. Therefore, they can be utilized in a wide range of applications making them of great interest to researchers. While their elasticity and yield strength have been the subject of several studies, very limited attention was given to the effect of size, strain rate, and temperature on the material plastic …

Mechanical Failure Of Metal/Ceramic Interfacial Regions Under Shear And Tensile Loading, Xiaoman Zhang

LSU Doctoral Dissertations

Quantitative assessment of the adhesion strength of ceramic hard coatings on substrates is a subject of great technological importance as well as current scientific relevance. Achievement of reliable and quantitative measurements of interfacial strength has proven difficult over the past two decades. In this dissertation, how the deformation and fracture behavior of ceramic/metal/substrate interfacial regions under shear and tensile loading is influenced by the structure and chemical composition of the interfacial region were observed and discussed. Interfacial shear failure experiments were carried out on focused ion beam fabricated micro pillars containing interfacial regions of ceramic/metal/substrate systems. Detailed characterization was carried …