Growing Large Single And Multi-Crystals From Alum Powder,
2026
Winona State University
Growing Large Single And Multi-Crystals From Alum Powder, Owen Paulson, Mayra G. Aguilar, Owen T. Maloney, Kole C. Koehler
Research & Creative Achievement Day
Crystal growth science is used to replicate the growth of crystals that form in nature. Channels of hot fluid with concentrations of minerals created the crystals found as gemstones. At low concentrations, no crystal grows. At high concentrations, a multitude of crystals grow. At the ideal concentration, a single, clear crystal grows. Four solution concentrations were used to create seed crystals. Those Alum seed crystals were attached to a string and suspended in various concentrations of Alum solution to find concentrations that create no crystal, a single crystal, and a multi-crystal.
Growing Alum Crystals,
2026
Winona State University
Growing Alum Crystals, Todd Carroll, Daniela Gutierrez Rubio, Kevin Dang, Samuel J. Whempner
Research & Creative Achievement Day
One of the easiest crystal growth experiments uses Alum powder to dissolve in water. The dissolved material slowly forms with seed crystals to create larger crystals. As the dissolved material is depleted, more is added to continue the crystal growth. Four different concentrations were used for seed crystal growth. Those crystals were attached to a string and hung in a bath of Alum solution. Different strategies were used to grow crystals and in some cases dissolve crystals.
Growing Alum Crystals,
2026
Winona State University
Growing Alum Crystals, Jackson A. Struhar, Alexis M. Freiboth, Ana N. Schneider
Research & Creative Achievement Day
Alum, also known as Potash, is used to can pickles. Alum powder was used to create seed crystals. The seed crystal was hung in a jar submerged in distilled water with alum powder dissolved to attempt to grow an Alum crystal over the Spring semester. Three different concentrations were used to determine changes associated with crystal growth and quality. Numerous strategies were employed throughout the semester as growth methods worked and did not work.
Growing Large Alum Crystals,
2026
Winona State University
Growing Large Alum Crystals, Wyatt N. Laborde, Will Gunderson, Kyle R. Behrens
Research & Creative Achievement Day
Alum forms a colorless cubic crystal that can grow to the size of a small apple over the span of 2-3 months of growth in a concentrated solution. Many different seed crystal solutions were used to obtain large clear seed crystals. The best seed crystal was attached to a string and suspended in various concentrations of Alum solution to allow for the seed crystal to grow into a large crystal. By monitoring the weight of the crystal, the solution concentration was adjusted for optimum growth.
Design And Fabrication Of A Composite Torpedo Baseball Bat,
2026
Winona State University
Design And Fabrication Of A Composite Torpedo Baseball Bat, Peyton A. Lee, Carter Mathison, Jaden J. Schwantz, Noah Misukanis, Cole V. Stalberger
Research & Creative Achievement Day
Observing current trends in Major League Baseball, there has been increasing interest in torpedo-style wood bats due to their unique weight distribution. Unlike traditional bat geometries, the torpedo design shifts more weight toward the hands, improving balance and allowing for greater control throughout the swing. This project applies the same concept using composite materials so that high school and college players can also have access to this design innovation. The proposed bat is constructed from carbon fiber reinforced polymer with an epoxy resin to create a lightweight and durable structure. The design aims to maintain the performance benefits of the …
Cast In Steel: Horseman's Axe,
2026
Arkansas State University - Jonesboro
Cast In Steel: Horseman's Axe, Sam A. Morris
Create@State
Cast in Steel is a competition between universities across North America started by the Steel Founders Society of America. The competition is centered around giving students the opportunity to learn about casting and the steel industry in general. A prompt of a weapon or tool with some level of historical significance is given to all the teams. The prompt for the 2026 Arkansas State University team, was a Horseman’s Axe. The team designed their rendition of a horseman’s axe, worked with Southern Cast Products as their local industry parter, and fabricated a finished axe to represent Arkansas State University as …
Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide,
2026
Department of Interdisciplinary Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto
Journal of Materials Exploration and Findings
CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …
Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method,
2026
Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika
Journal of Materials Exploration and Findings
An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …
Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods,
2026
Departement of Interdisciplinary Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, 16424, Indonesia
Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing
Journal of Materials Exploration and Findings
The development of green hydrogen in Indonesia, while promising for supporting industrial decarbonization, remains in its early stages and faces various challenges across technical, economic, and regulatory domains. This study aims to identify and prioritize the risks linked to green hydrogen supply chain in Indonesia, particularly for applications in the ammonia industry. A set of 49 potential risk factors was initially compiled through literature review and prior studies. The Delphi method was employed with a panel of experts to validate these risks, ultimately refining the list to 27 critical risk factors. Subsequently, the Technique for Order Preference by Similarity to …
A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds,
2026
Mechanical Engineering Department, Ahmadu Bello University, Zaria, Nigeria
A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause
Journal of Materials Exploration and Findings
The present work focuses on the study of the effect of adding different weight percentages and particle sizes of various metal chips to foundry sand on the tensile strength of aluminum alloy castings, utilizing Taguchi's optimization methodology and regression analysis. Characterization techniques such as X-ray fluorescence (XRF), thermogravimetry, and SEM were also used. The XRF analysis identified aluminum (76.61%), silicon (17.49%), and magnesium (1.28%) as the major elements in the aluminum alloy engine block. For the foundry sand, silicon (89.51%), phosphorus (7.41%), and potassium (1.7%) were found. In contrast, the major constituents in cast iron included iron (88.3%), carbon (3.7%), …
Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060,
2026
Department of Interdisciplinary Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto
Journal of Materials Exploration and Findings
The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …
Sulfate Attack And Microstructural Study Of Self-Compacting Sand Concrete Incorporating Recycled Concrete,
2026
Team Leader – Materials Testing and Quality Control Nvira, Québec, Canada
Sulfate Attack And Microstructural Study Of Self-Compacting Sand Concrete Incorporating Recycled Concrete, S. Boudali, A.M. Soliman, B. Abdulsalam, S. Poncet, Adel Elsafty
HBRC Journal
This study presents an experimental investigation of the microstructure of Self-Compacting Sand Concrete (SCSC) containing recycled concrete aggregates (RCA) and fine recycled concrete powder (FRCP) under a sulfate attack. SCSC specimens were submerged and stored for one year in a sodium sulfate solution. The microstructure of SCSC was investigated using quantitative X-ray diffraction and SEM analysis performed on samples taken from both the core and surface of the specimens. Also, the impact of different percentages and sizes of recycled aggregates (i.e., varying from nano- up to micro-sized aggregates) on the microstructural properties of SCSC exposed to sulfate attack was evaluated. …
Electrophoretic Deposition Of Chitosan-Based Coatings On Magnesium Alloys For Implant Applications: A Review,
2026
Islamic Azad University, Najafabad Branch
Electrophoretic Deposition Of Chitosan-Based Coatings On Magnesium Alloys For Implant Applications: A Review, M. H. Payampur, D. Azimi, W. W. Milligan, M. Razzaghi, H. R. Bakhsheshi-Rad, J. Drelich
Michigan Tech Publications
Magnesium (Mg) alloys are highly promising materials for biomedical applications due to their excellent mechanical properties and biocompatibility. However, their rapid corrosion in physiological environments remains a significant barrier to their use in implantable devices. Surface modification techniques, particularly chitosan (CS)-based coatings, have shown considerable potential in addressing these challenges. CS, as a biopolymer, not only reduces the corrosion rate of Mg alloys but also enhances their biological performance. Electrophoretic deposition (EPD) is a highly versatile technique that enables the uniform deposition of CS and CS-composite coatings on Mg alloys. This review provides a comprehensive analysis of depositing CS and …
Quantitative Phase-Field Modeling Of Nonequilibrium Microstructural Evolution In Rapid Solidification For Additive Manufacturing,
2026
Missouri University of Science and Technology
Quantitative Phase-Field Modeling Of Nonequilibrium Microstructural Evolution In Rapid Solidification For Additive Manufacturing, Leiji Li, Fei Xiao, Ying Zhou, Xiaorong Cai, Chongfeng Zhang, Jinzhong Gao, Xiaopeng Shen, Tianchi Zhu, Sihan Wang, Yijia Gu, Xuejun Jin
Materials Science and Engineering Faculty Research & Creative Works
Fusion-based metal additive manufacturing (AM) relies on layer-by-layer deposition and rapid solidification, where the material transitions swiftly from liquid to solid. A key phenomenon during this process is solute trapping, a nonequilibrium effect governed by a velocity-dependent partition coefficient, which critically influences microstructure kinetics, morphology, and phase formation. In this study, we employ a recently proposed quantitative phase field (PF) model to systematically explore solute trapping, solute drag, and their impacts on pattern formation during rapid solidification at AM-relevant velocities, in both one and two dimensions. Our simulations reveal a growth mode transition from planar to cellular to dendritic, and …
Sub-Nanometer Nanoclusters Of Copper Atop Single-Atom Copper Moieties Toward Electrochemical Co2 Hydrogenation To Methane,
2026
College of Engineering
Sub-Nanometer Nanoclusters Of Copper Atop Single-Atom Copper Moieties Toward Electrochemical Co2 Hydrogenation To Methane, Ahmed Badreldin, Mohammad Bilal Minhas, Shengyao Wang, Gabriella Smith, Shaoqin Chen, Shiwen Wu, Carter Racine, Jin Feng, Yun Hang Hu, Tao Li, Ying Li
Michigan Tech Publications
The electrochemical CO2 reduction (eCO2R) offers a compelling route for converting CO2 into value-added fuels and chemicals. Among CO2-derived products, methane (CH4) occupies a distinct position, serving both as a key intermediate for emerging cascade electro-oxidation to oxygenates and as a strategically important extraterrestrial fuel that can be generated in situ from off-planet CO2 resources. Although Cu-based catalysts capable of selectively producing CH4 have been reported, they seldom sustain high selectivity at practically relevant current densities. Here, we created a single-step co-pyrolysis strategy toward generating and anchoring Cu sub-nanometer clusters (CuSNC) atop Cu-Nx single-atom (SA) motifs embedded within N-doped carbon …
Self-Assembly Interactions In Magnetite-Coated Cellulose Nanocrystals: Implications For Magnetic Hyperthermia Applications,
2026
University of Texas at San Antonio
Self-Assembly Interactions In Magnetite-Coated Cellulose Nanocrystals: Implications For Magnetic Hyperthermia Applications, Mohammad J. Hasan, Erin L. Mcneill, Kishore Chand, Juganta Roy, Monishita Deb, Katherine Schlaak, Sydney Herzog, Yvonne Sun, Sarah Watzman, Esteban E. Ureña-Benavides, Erick S. Vasquez-Guardado
Chemical and Materials Engineering Faculty Publications
Magnetic cellulose nanocrystal (MCNC) nanocomposites are promising sustainable and biocompatible platforms for magnetic hyperthermia; however, the molecular mechanisms governing Fe3O4 adsorption and deposition onto CNCs remain poorly understood. Here, sulfated (S-CNC) and TEMPO-oxidized CNCs (T-CNC) were used to prepare nanocomposites at 1:2 and 1:4 CNC:Fe3O4 mass ratios, enabling a systematic evaluation of how surface chemistry and nanoparticle loading dictate interfacial interactions and magneto-colloidal behavior. Bare magnetite nanoparticles were 21 ± 5 nm by TEM but grew to 144 ± 18 in the DLS measurement at pH 7. The S-CNC nanocomposites had hydrodynamic sizes between 144 and 210 nm, not much …
Relation Between Swelling Potential And Swelling Pressure For Different Types Of Expansive Clay Of New Cairo,
2026
Teaching Assistant at the Department of Civil Engineering, Faculty of Engineering at Mataria branch, Capital University, Cairo, Egypt
Relation Between Swelling Potential And Swelling Pressure For Different Types Of Expansive Clay Of New Cairo, Sherouk Hany Mohamed, Amr Radwan, Mohammed Rabie, Hussein Mostafa
HBRC Journal
The purpose of this paper is to present correlations that may help in predicting swelling pressure (PS) and swelling potential (SP) for expansive clay, which can contribute to solving engineering problems such as cracking, shifting or other structural damage, that may occur, if the behavior of this type of soil is not taken into consideration. Therefore, in this research, five different samples of expansive clay soils were collected from different site locations in New Cairo, Egypt. Then, these samples were dried, pulverized and passed through sieve No. 40 (0.425 mm). The samples were prepared initially at maximum dry …
Synthesis And Hydrothermal Evaluation Of Poly(Styrene Phosphonate) For Conformance Control In Geothermal Reservoirs,
2026
Missouri University of Science and Technology
Synthesis And Hydrothermal Evaluation Of Poly(Styrene Phosphonate) For Conformance Control In Geothermal Reservoirs, Sara Mccauley
Miners Solving for Tomorrow Research Conference
As atmospheric carbon dioxide levels continue to rise, geothermal energy has emerged as a promising energy alternative to fossil fuels. A barrier to widespread implementation and energy production efficiency is macro-heterogeneity of the rock matrix. Cracks, void spaces, and flow conduits divert fluid flow away from unswept portions of the geothermal reservoir and can cause cooling of the reservoir. Flow heterogeneity has been treated in oil reservoirs by injecting hydrogel particles that travel preferentially to ultra-high permeability zones and selectively block fluid flow in these regions. We are applying polymer hydrogels that withstand hydrothermal conditions of 225 up to 275°C …
Toward Sustainable 3d Printable Cementitious Materials: Low-Carbon Design With Fiber Reinforcement,
2026
Missouri University of Science and Technology
Toward Sustainable 3d Printable Cementitious Materials: Low-Carbon Design With Fiber Reinforcement, Nima Mahmoudzadeh Vaziri
Miners Solving for Tomorrow Research Conference
3D printing of cementitious materials, as an emerging construction technology, faces challenges in both mechanical performance and sustainability. Conventional mixture designs rely on high cement contents, leading to increased CO2 emissions, while printed elements often exhibit brittle behavior with limited crack resistance and reduced post-cracking performance. This study investigates the development of low-carbon 3D printed cementitious composites using environmentally friendly supplementary cementitious materials (SCMs) and fillers, combined with fiber reinforcement to enhance mechanical performance. Locally available SCMs and fillers were incorporated to significantly reduce cement content (>40%) and improve sustainability. Fiber reinforcement was introduced to mitigate brittleness and enhance …
Structural Analysis On Iron Phosphate Glasses After Dechlorination Of Mixed Chloride Waste Forms,
2026
Missouri University of Science and Technology
Structural Analysis On Iron Phosphate Glasses After Dechlorination Of Mixed Chloride Waste Forms, Lucas Greiner
Miners Solving for Tomorrow Research Conference
Molten salt reactors (MSRs) require durable waste forms for immobilizing halide-rich salts. This study examines iron phosphate glasses derived from a simple salt mixture (SSM), focusing on the effect of Fe₂O₃ additions (2.5–10 wt%) on structure and phase stability. Intermediates were processed at 300–600 °C and vitrified at 1050 °C. Raman spectroscopy and HPLC show that increasing iron content depolymerizes the phosphate network, shifting from Q² toward Q¹ species and reducing chain length. XRD confirms amorphous behavior for ≤7.5 wt% Fe₂O₃, while 10 wt% shows crystallization, with KFeP₂O₇ observed in samples processed at 400 °C. Despite reduced connectivity, iron enhances …
