Oh, My Darling Clementine: A Detailed History And Data Repository Of The Los Alamos Plutonium Fast Reactor,
2023
University of Nevada, Las Vegas
Oh, My Darling Clementine: A Detailed History And Data Repository Of The Los Alamos Plutonium Fast Reactor, Hannah K. Patenaude, Franz J. Freibert
College of Sciences Graduate Student Research
The Los Alamos Plutonium Fast Reactor, Clementine, provided the first fast neutron spectrum using a metallic plutonium fuel system and liquid mercury coolant. Clementine is often mentioned in the history of fast, metal-fueled, or metal-cooled designs, with little public information regarding the specifications or timeline. This paper contains a synopsis of each report regarding the development, operation, experimental results, failures, and subsequent disassembly of Clementine to explore this unique reactor within the context of modern advanced reactor development.
The Influence Of Bipolar Electrochemical Cell Geometry On The Studies Of Pitting Corrosion,
2023
University of South Florida
The Influence Of Bipolar Electrochemical Cell Geometry On The Studies Of Pitting Corrosion, Amin Kazem Ghamsari
USF Tampa Graduate Theses and Dissertations
Bipolar electrochemistry (BPE) is a technique that provides a wireless alternative totraditional electrochemistry to elicit redox reactions. It has been utilized in different applications, including studying localized corrosion, gradient electrodeposition, propulsion of micromotors, and water treatment. The popularity of the method is not solely dependent on its wirelessness but more due to the simultaneous presence of cathodic and anodic poles on the same surface, which also begets its name as bipolar. The concept of the method is based on the polarization of conductive objects in an electric field in the presence of an electrolyte. In BPE, instead of controlling the …
Lead-Free Perovskite Homojunction-Based Htm-Free Perovskite Solar Cells: Theoretical And Experimental Viewpoints,
2023
United Arab Emirates University; United Arab Emirates University
Lead-Free Perovskite Homojunction-Based Htm-Free Perovskite Solar Cells: Theoretical And Experimental Viewpoints, Sajid Sajid, Salem Alzahmi, Imen Ben Salem, Jongee Park, Ihab M. Obaidat
All Works
Simplifying the design of lead-free perovskite solar cells (PSCs) has drawn a lot of interest due to their low manufacturing cost and relative non-toxic nature. Focus has been placed mostly on reducing the toxic lead element and eliminating the requirement for expensive hole transport materials (HTMs). However, in terms of power conversion efficiency (PCE), the PSCs using all charge transport materials surpass the environmentally beneficial HTM-free PSCs. The low PCEs of the lead-free HTM-free PSCs could be linked to poorer hole transport and extraction as well as lower light harvesting. In this context, a lead-free perovskite homojunction-based HTM-free PSC was …
Fast-, Light-Cured Scintillating Plastic For 3d-Printing Applications,
2023
Air Force Institute of Technology
Fast-, Light-Cured Scintillating Plastic For 3d-Printing Applications, Brian G. Frandsen, Michael Febbraro, Thomas Ruland, Theodore W. Stephens, Paul A. Hausladen, Juan J. Manfredi, James E. Bevins
Faculty Publications
Additive manufacturing techniques enable a wide range of possibilities for novel radiation detectors spanning simple to highly complex geometries, multi-material composites, and metamaterials that are either impossible or cost prohibitive to produce using conventional methods. The present work identifies a set of promising formulations of photocurable scintillator resins capable of neutron-gamma pulse shape discrimination (PSD) to support the additive manufacturing of fast neutron detectors. The development of these resins utilizes a step-by-step, trial-and-error approach to identify different monomer and cross-linker combinations that meet the requirements for 3D printing followed by a 2-level factorial parameter study to optimize the radiation detection …
Self-Healing Properties Of Augmented Injectable Hydrogels Over Time,
2023
Rowan University
Self-Healing Properties Of Augmented Injectable Hydrogels Over Time, Connor Castro, Zachary R. Brown, Erik Brewer
Henry M. Rowan College of Engineering Departmental Research
Injectable polymers offer great benefits compared to other types of implants; however, they tend to suffer from increased mechanical wear and may need a replacement implant to restore these mechanical properties. The purpose of this experiment is to investigate an injectable hydrogel's self-healing ability to augment itself to a previously molded implant. This was accomplished by performing a tensile strength test to examine potential diminishing mechanical properties with increasing time, as well as dye penetration tests to examine the formation of interfacial bonds between healed areas of hydrogels. There were several time points in between injections that were explored, from …
Tunable, Reconfigurable, And Programmable Acoustic Metasurfaces: A Review,
2023
Rowan University
Tunable, Reconfigurable, And Programmable Acoustic Metasurfaces: A Review, Ali Zabihi, Chadi Ellouzi, Chen Shen
Henry M. Rowan College of Engineering Departmental Research
The advent of acoustic metasurfaces (AMs), which are the two-dimensional equivalents of metamaterials, has opened up new possibilities in wave manipulation using acoustically thin structures. Through the interaction between the acoustic waves and the subwavelength scattering, AMs exhibit versatile capabilities to control acoustic wave propagation such as by steering, focusing, and absorption. In recent years, this vibrant field has expanded to include tunable, reconfigurable, and programmable control to further expand the capacity of AMs. This paper reviews recent developments in AMs and summarizes the fundamental approaches for achieving tunable control, namely, by mechanical tuning, active control, and the use of …
Turning Dead Leaves Into An Active Multifunctional Material As Evaporator, Photocatalyst, And Bioplastic,
2023
Michigan Technological University
Turning Dead Leaves Into An Active Multifunctional Material As Evaporator, Photocatalyst, And Bioplastic, Siyuan Fang, Xingyi Lyu, Tian Tong, Aniqa Ibnat Lim, Tao Li, Jiming Bao, Yun Hang Hu
Michigan Tech Publications, Part 1
Large numbers of leaves fall on the earth each autumn. The current treatments of dead leaves mainly involve completely destroying the biocomponents, which causes considerable energy consumption and environmental issues. It remains a challenge to convert waste leaves into useful materials without breaking down their biocomponents. Here, we turn red maple dead leaves into an active three-component multifunctional material by exploiting the role of whewellite biomineral for binding lignin and cellulose. Owing to its intense optical absorption spanning the full solar spectrum and the heterogeneous architecture for effective charge separation, films of this material show high performance in solar water …
Closed-Loop Recyclable Plastics From Poly(Ethyl Cyanoacrylate),
2023
Boise State University
Closed-Loop Recyclable Plastics From Poly(Ethyl Cyanoacrylate), Allison J. Christy, Scott T. Phillips
Materials Science and Engineering Faculty Publications and Presentations
Ethyl cyanoacrylate is a highly reactive monomer that has been used nearly exclusively to make Super Glue and related fast-setting adhesives. Here, we describe transformation of this highly abundant, readily available monomer into a closed-loop recyclable plastic that could supplant currently used (and often unrecycled/unrecyclable) plastics, such as poly(styrene). We report polymerization conditions, plastic-processing methods, and plastic-recycling protocols for poly(ethyl cyanoacrylate) plastics that make the Super Glue monomer a viable starting material for a next generation of closed-loop recyclable plastics. The processes described are scalable, and the plastics can be recycled in a closed-loop process with >90% yields, even when …
Effect Of Substituent Location On The Relationship Between The Transition Dipole Moments, Difference Static Dipole, And Hydrophobicity In Squaraine Dyes For Quantum Information Devices,
2023
Boise State University
Effect Of Substituent Location On The Relationship Between The Transition Dipole Moments, Difference Static Dipole, And Hydrophobicity In Squaraine Dyes For Quantum Information Devices, Maia Ketteridge, Austin Biaggne, Ryan Rau, German Barcenas, Olga A. Mass, William B. Knowlton, Bernard Yurke, Lan Li
Materials Science and Engineering Faculty Publications and Presentations
Aggregates of organic dyes that exhibit excitonic coupling have a wide array of applications, including medical imaging, organic photovoltaics, and quantum information devices. The optical properties of a dye monomer, as a basis of dye aggregate, can be modified to strengthen excitonic coupling. Squaraine (SQ) dyes are attractive for those applications due to their strong absorbance peak in the visible range. While the effects of substituent types on the optical properties of SQ dyes have been previously examined, the effects of various substituent locations have not yet been investigated. In this study, density functional theory (DFT) and time-dependent density functional …
Magnetic Nanocomposites For The Remote Activation Of Sulfate Radicals For The Removal Of Rhodamine B,
2023
University of Kentucky
Magnetic Nanocomposites For The Remote Activation Of Sulfate Radicals For The Removal Of Rhodamine B, Pranto Paul, Marissa Nicholson, J. Zach Hilt
UK CARES Faculty Publications
The widespread presence of numerous organic contaminants in water poses a threat to the ecological environment and human health. Magnetic nanocomposites exposed to an alternating magnetic field (AMF) have a unique ability for magnetically mediated energy delivery (MagMED) resulting from the embedded magnetic nanoparticles; this localized energy delivery and associated chemical and thermal effects are a potential method for removing contaminants from water. This work developed a novel magnetic nanocomposite—a polyacrylamide-based hydrogel loaded with iron oxide nanoparticles. For this magnetic nanocomposite, persulfate activation and the contamination removal in water were investigated. Magnetic nanocomposites were exposed to AMF with a model …
Austenite Formation And Manganese Partitioning During Double Soaking Of An Ultralow Carbon Medium-Manganese Steel,
2023
Michigan Technological University
Austenite Formation And Manganese Partitioning During Double Soaking Of An Ultralow Carbon Medium-Manganese Steel, Josh J. Mueller, Alexandra G. Glover, David K. Matlock, John G. Speer, Emmanuel De Moor
Michigan Tech Publications, Part 1
Double soaking (DS) is a thermal processing route intended to produce austenite–martensite microstructures in steels containing austenite-stabilizing additions and consists of intercritical annealing (primary soaking), followed by heating and brief isothermal holding at an increased temperature (secondary soaking), and quenching. Herein, experimental dilatometry during DS of a medium-manganese (Mn) steel with nominally 7 wt% Mn and an ultralow residual carbon concentration, in combination with phase-field simulations of austenite formation during secondary soaking, is presented. The feasibility of maintaining heterogeneous Mn distributions during DS is demonstrated and insight is provided on the effects of the secondary soaking temperature and prior Mn …
Precious Plastics - Plastic Brick Machine Fabrication,
2023
California Polytechnic State University, San Luis Obispo
Precious Plastics - Plastic Brick Machine Fabrication, Timothy Ukaobasi Kanu, Evi Paraskevi Troulis
Architectural Engineering
The goal of this research is to determine the structural parameters of the recycled plastic polypropylene when molded into bricks resembling CMU blocks. To accomplish this, three mechanisms had to be assembled: the shredder, the injector, and the 1x1 mold. A tensile and compression test were to be performed on the plastic brick, and the values would be used to compare the tensile and compressive strength of PP plastic bricks, as well as their modulus of elasticity and stress vs. Strain performance. These values would be analyzed to determine whether it would be feasible to build an entire plastic wall. …
Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components,
2023
Missouri University of Science and Technology
Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, Tieshu Huang
Materials Science and Engineering Faculty Research & Creative Works
Ceramic On-Demand Extrusion (CODE) is a direct ink writing process which allows for the creation of near theoretically dense ceramic components with large cross-sections due to oil-assisted drying. Yttria-stabilized zirconia (YSZ) colloidal pastes (∼d50 ≲ 1 µm) were used in CODE to produce dense (multi-road infill and ≳ 98% relative density), large continuous volume (> 1 cm3), and high fidelity (nozzle diameters ≲ 1 mm) structural ceramic components. However, many of these printed components underwent significant particle migration after forming. The reason for this particle migration defect was investigated using the coffee-ring effect for dilute solutions and rheological methods for …
Description Of Reaction And Vibrational Energetics Of Co2-Nh3interaction Using Quantum Computing Algorithms,
2023
University of Kentucky
Description Of Reaction And Vibrational Energetics Of Co2-Nh3interaction Using Quantum Computing Algorithms, Manh Tien Nguyen, Yueh-Lin Lee, Dominic Alfonso, Qing Shao, Yuhua Duan
Markey Cancer Center Faculty Publications
CO2 capture is critical to solving global warming. Amine-based solvents are extensively used to chemically absorb CO2. Thus, it is crucial to study the chemical absorption of CO2 by amine-based solvents to better understand and optimize CO2 capture processes. Here, we use quantum computing algorithms to quantify molecular vibrational energies and reaction pathways between CO2 and a simplified amine-based solvent model—NH3. Molecular vibrational properties are important to understanding kinetics of reactions. However, the molecule size correlates with the strength of anharmonicity effect on vibrational properties, which can be challenging to address using classical computing. Quantum computing can help enhance molecular …
Influence Of Dilute Silicon Carbide Nanoparticle Additions To The Microstructure And Mechanical Properties Of Laser Powder Bed Fusion Molybdenum,
2023
Air Force Institute of Technology
Influence Of Dilute Silicon Carbide Nanoparticle Additions To The Microstructure And Mechanical Properties Of Laser Powder Bed Fusion Molybdenum, Nathan E. Ellsworth
Theses and Dissertations
Consolidation of pure molybdenum through laser powder bed fusion and other additive manufacturing techniques is complicated by a high melting temperature, thermal conductivity, and ductile-to-brittle transition temperatures. Nano-sized silicon carbide particles (0.1 wt%) were homogeneously mixed with molybdenum powder and the printing characteristics, chemical composition, microstructure, and mechanical properties were compared to pure molybdenum for scan speeds of 100, 200, 400, and 800 mm/s. The addition of silicon carbide improved the consolidation and mechanical properties and the oxygen content was reduced. Two mechanisms of oxygen reduction were identified as responsible for the improvements: oxidation of free carbon and the creation …
Angle Resolved Photoelectron Spectroscopy Study Of Germanium Tin: Experimentally Determined Electronic Band Gap And Surface Analysis,
2023
Air Force Institute of Technology
Angle Resolved Photoelectron Spectroscopy Study Of Germanium Tin: Experimentally Determined Electronic Band Gap And Surface Analysis, Jeremy M. Hunter
Theses and Dissertations
The germanium tin band gap is responsive to wavelengths in the mid to near infrared spectrum; this shows promise in meeting the detection demands of the next generation infrared detectors. Recent developments in germanium tin (GeSn) alloy growth techniques have peaked the scientific community’s interest in GeSn based optoelectrical and detection devices. Detection materials made entirely of group IV elements are compatible with complementary metal-oxide semiconductor manufacturing techniques. Understanding the surface chemistry of this alloy is fundamental for solid state device design and must be analyzed to optimize device performance. Studies have shown that with the addition of tin, the …
Material Property Dependence Of Nanoparticle Silicon Carbide Alloying In Additively Manufactured Molybdenum,
2023
Air Force Institute of Technology
Material Property Dependence Of Nanoparticle Silicon Carbide Alloying In Additively Manufactured Molybdenum, Andrew P. Mason
Theses and Dissertations
The structural performance of additively manufactured Mo printed by LPBF can be significantly improved by nanoparticle alloying. Previous AFIT studies of SiC nanoparticle addition conducted by Ellsworth (2022) et al. demonstrated increased powder consolidation, leading to reduced porosity, increased microhardness, and a shift in atomic defect concentrations. The addition of defected SiC particles is proposed to reduce in situ oxidation by acting as a sacrificial oxidizing agent and contributing to the formation of Mo disilicide secondary phases. This study investigated the relationship between laser powder bed fusion Mo microscale and nanoscale properties with varying SiC particle size while maintaining a …
Novel Effects Of Grain Size And Ion Implantation On Grain Boundary Segregation In Ion Irradiated Austenitic Steel,
2023
Missouri University of Science and Technology
Novel Effects Of Grain Size And Ion Implantation On Grain Boundary Segregation In Ion Irradiated Austenitic Steel, Andrew K. Hoffman, Yongfeng Zhang, Maalavan Arivu, Li He, Kumar Sridharan, Yaqiao Wu, Rinat K. Islamgaliev, Ruslan Z. Valiev, Haiming Wen
Materials Science and Engineering Faculty Research & Creative Works
Nuclear Reactor Environments Are Extreme in Nature Due to the Combination of Exposure to Corrosive Coolant, Mechanical Stresses, and Neutron Irradiation Damage. This Combination of Environments Can Lead to Irradiation Induced/assisted Precipitation, Segregation, and Embrittlement Coupled with Enhanced Creep and Stress Corrosion Cracking. While Nanostructured Materials Are of Interest in a Variety of Applications Due to their Unique Properties Including High Mechanical Strength, for Nuclear Applications Nanostructured Materials Have the Added Benefit of Irradiation Resistance Due to the High-Volume Density of Sinks for Irradiation-Induced Defects. in This Study, We Show Unique Radiation-Induced Segregation (RIS) Behavior in Nanocrystalline 304 Stainless Steel …
Anisotropic Thermal Expansion In High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions,
2023
Missouri University of Science and Technology
Anisotropic Thermal Expansion In High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, Gregory Hilmas
Materials Science and Engineering Faculty Research & Creative Works
High-entropy (HE) ultra-high temperature ceramics have the chance to pave the way for future applications propelling technology advantages in the fields of energy conversion and extreme environmental shielding. Among others, HE diborides stand out owing to their intrinsic anisotropic layered structure and ability to withstand ultra-high temperatures. Herein, we employed in-situ high-resolution synchrotron diffraction over a plethora of multicomponent compositions, with four to seven transition metals, with the intent of understanding the thermal lattice expansion following different composition or synthesis process. As a result, we were able to control the average thermal expansion (TE) from 1.3 x 10−6 to …
Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components,
2023
Missouri University of Science and Technology
Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, Tieshu Huang
Materials Science and Engineering Faculty Research & Creative Works
Ceramic On-Demand Extrusion (CODE) is a direct ink writing process which allows for the creation of near theoretically dense ceramic components with large cross-sections due to oil-assisted drying. Yttria-stabilized zirconia (YSZ) colloidal pastes (∼d50 ≲ 1 µm) were used in CODE to produce dense (multi-road infill and ≳ 98% relative density), large continuous volume (> 1 cm3), and high fidelity (nozzle diameters ≲ 1 mm) structural ceramic components. However, many of these printed components underwent significant particle migration after forming. The reason for this particle migration defect was investigated using the coffee-ring effect for dilute solutions and rheological methods for …
