Materials Science and Engineering Commons^™

Mechanical Characterization Of Additively Manufactured Alloys Compared To Their Wrought Counterparts, Laith A. Alqawasmi

Mechanical Engineering ETDs

Additive manufacturing is a method of manufacturing based on building parts layer by layer, allowing for more control over shape of the product, therefore reducing machining costs, reducing material waste, faster production times and the ability to build complex engineering design that other manufacturing technologies won’t be able to produce. This research is on the tensile and indentation testing (following ASME standards) of 3D printed Ti-6Al-4V and Inconel 718 built by powder-based direct energy deposition technology. Ti-6Al-4V is an attractive material for the aerospace and aviation industry, and Inconel 718, a nickel-chromium based superalloy, is an attractive material for usage …

Modifying Barium Hexaferrite Magnets By Adding Sol-Gel Synthesized Cobalt Ferrite Phase, Thanida Charoensuk, Wannisa Thongsamrit, Anuchit Hunyek, Komkrich Chokprasombat, Pongsakorn Jantaratana, Chitnarong Sirisathitkul

Karbala International Journal of Modern Science

Combining various types of ferrites brings about magnetic properties desirable for different applications. This study aims to modify barium hexaferrite (BaFe₁₂O₁₉) by physically mixing it with cobalt ferrite (CoFe₂O₄). BaFe₁₂O₁₉/CoFe₂O₄ magnets were produced by ball-milling and pressing sol-gel-derived ferrite powders. The ferrite composites showed variations in magnetic properties from BaFe₁₂O₁₉ magnets with a saturation magnetization of 69.46 emu/g and a maximum energy product of 0.4529 MGOe. For the BaFe₁₂O₁₉:CoFe₂O₄ weight ratio of 4:1, both satura-tion …

Femtotesla Magnetometry And Nanoscale Imaging With Color Centers In Diamond, Yaser Silani

Optical Science and Engineering ETDs

Intriguing photophysical properties of color centers in diamond make them ideal candidates for many applications from imaging and sensing to quantum networking. In the first part of this work, we have studied the silicon vacancy (SiV) centers in diamond for nanoscale imaging applications. We showed that these centers are promising fluorophores for Stimulated Emission Depletion (STED) microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. In the second part, we built a femtotesla Radio-Frequency (RF) magnetometer based on the diamond nitrogen vacancy (NV) centers and magnetic flux concentrators. We used this sensor to remotely detect Nuclear Quadrupole Resonance …

A High-Strength Precipitation Hardened Cobalt-Free High-Entropy Alloy, Matthew Luebbe, Jiaqi Duan, Fan Zhang, Jonathan Poplawsky, Hans Pommeranke, Maalavan Arivu, Andrew Hoffman, Mario F. Buchely, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Recent Studies on Precipitation-Hardened High-Entropy Alloys (HEAs) Demonstrate their High Strength and Thermal Stability, Making Them Promising Materials for High-Temperature Structural Applications Such as Nuclear Reactors. However, Many Existing HEAs Contain Cobalt (Co), Which is Unsuitable for Nuclear Applications Because of the Long-Term Activation Issue of Co. Co is Also Expensive and Considered a Critical Material for Other Applications. Therefore, It is Desired to Exclude Co from the Composition. a Co-Free (Fe_0.3Ni_0.3Mn_0.3Cr_0.1)88Ti₄Al₈ HEA Was Developed and Studied in This Work. in Contrast to Previous Co-Free HEAs, This Alloy is …

A High-Strength Precipitation Hardened Cobalt-Free High-Entropy Alloy, Matthew Luebbe, Jiaqi Duan, Fan Zhang, Jonathan Poplawsky, Hans Pommeranke, Maalavan Arivu, Andrew Hoffman, Mario Buchely, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Recent studies on precipitation-hardened high-entropy alloys (HEAs) demonstrate their high strength and thermal stability, making them promising materials for high-temperature structural applications such as nuclear reactors. However, many existing HEAs contain cobalt (Co), which is unsuitable for nuclear applications because of the long-term activation issue of Co. Co is also expensive and considered a critical material for other applications. Therefore, it is desired to exclude Co from the composition. a Co-free (Fe0.3Ni0.3Mn0.3Cr0.1)88Ti4Al8 HEA was developed and studied in this work. in contrast to previous Co-free HEAs, this alloy is close to Equi atomic in its composition and promises a more …

Development Of Novel Electrodes And Electrolytes For Safer Aqueous Ammonium Ion Batteries With Enhanced Performance., Shelton Farai Kuchena

LSU Doctoral Dissertations

The Lithium-ion battery (LIBs) system has dominated the battery market because of its superior energy and power density. Problems related to LIBs such as safety, scarcity of cobalt and lithium have led researchers to explore alternative battery systems. NH₄⁺ ion is a nonmetal charge carrier with lower molar mass (18 mol g^-1) and smaller hydrated ionic size (3.31 Å) which results in excellent electrochemical properties. Furthermore, NH₄⁺ ion has a tetrahedral structure that has no preferred orientation as compared to spherical metal ions giving a different intercalation chemistry based on hydrogen bonding. These properties …

Corrosion Case Study On Automobile, Grace Ajayi, Xinran Pan, Geethu Sasikala, Marshall S. Yang

Chemistry Publications

No abstract provided.

Deposition, Material Characterization, And Mechanical Testing Of Cr Containing Diamond-Like Carbon Films, Nicholas Anderson

LSU Master's Theses

A series of amorphous hydrogenated chromium containing diamond-like carbon films were deposited on 316 stainless steel substrates with a chromium interlayer through inductively coupled plasma assisted direct current magnetron sputtering. Details on the deposition process of these films are discussed. The film is characterized using scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, energy dispersive spectroscopy, and transmission electron microscopy. The coating hardness and indentation modulus is measured by instrumented nanoindentation. The coefficient of friction and the upper bound of the coating wear coefficient is measured using the pin-on-disk method. The fracture toughness of the diamond-like carbon film and a …

Beirut Arab University - Faculty Of Engineering - Newsletter Issue 0, Faculty Of Engineering, Beirut Arab University

Engineering Newsletters

No abstract provided.

Timeline - History Of The Metallurgy / Mineral Processing Programs (1900-2022), Jerome Downey, Larry G. Twidwell

Metallurgy

No abstract provided.

History Of The Metallurgy / Mineral Processing Programs (1900-2022), Jerome Downey, Larry G. Twidwell

Metallurgy

No abstract provided.

Treatment Of Arsenic-Bearing Minerals And Fixation Of Recovered Arsenic Products: An Updated Review, Larry G. Twidwell

Metallurgy

Mineral processing and extractive metallurgical operations have created and are creating appreciable arsenic bearing wastewater and waste solid products that have to be handled, treated for recycle, or treated for environmentally safe disposal. At present there are intense research and operational activities being conducted to provide the best viable processing procedures to ensure that the mineral processing and extractive metallurgical industries are profitable and environmentally secure. The focus of this presentation is on the element arsenic, even though many other deleterious elements may also be present in ores and concentrates. Numerous base metal resources contain arsenic bearing minerals, especially resources …

Entre Punzones Y Percutores Reconstrucción De Tecnología Ósea De Los Selk'nam (Tierra Del Fuego), Rachel Dietz

Independent Study Project (ISP) Collection

Esta investigación se enfoca en el estudio, reconstrucción y uso de la tecnología ósea empleada por las sociedades cazadoras-recolectoras-pedestres que ocuparon el litoral Atlántico de Tierra del Fuego, durante el Holoceno, específicamente se enfoca en la tecnología utilizada por los Selk´nam del Norte de Tierra del Fuego. La tecnología ósea fue una parte importante de su cultura y dos tipos fueron elegidos para investigar: percutores blandos y punzones huecos. Los percutores blandos fueron confeccionados sobre huesos de guanaco, un recurso importante para las sociedades cazadoras-recolectoras.

Los percutores blandos fueron usados para la formatización de artefactos líticos a través de la …

Flexible Materials And Applications For Wearable Sensors, Brock Ferrari

Senior Honors Theses

This literature review aimed to address the limitations of rigid wearable sensors in the medical community by investigating the development of flexible materials for remote health monitoring. A keyword search was conducted on Google Scholar, PubMed, and the Jerry Falwell Library, which yielded 9,102 articles. After applying filtering techniques, the results were narrowed down to 21 articles, which were categorized into "Present Market Conditions," "Flexible Materials for Medical Use," "Applications for Wearable Sensors," and "Potential Use Cases." Discussions were held on prominent materials such as substrate, nanocomposite, and liquid metal materials, exploring their potential applications for chemical and physical sensing, …

Additive Manufacturing For Phase Change Thermal Energy Storage And Management, Thomas B. Freeman

Doctoral Dissertations and Master's Theses

Phase change materials can enhance the performance of energy systems by time shifting or reducing peak thermal loads. Certain electronic devices such as batteries, laser systems, or electric vehicle power electronics are highly transient and require pulse heat dissipation. Heat sinks, or thermal management devices made of a phase change material can absorb large heat spikes while maintaining a constant temperature. Additive manufacturing techniques hold tremendous potential to enable co-optimization of material properties and device geometry, while potentially reducing material waste and manufacturing time. Recently, a few efforts have emerged that employ additive manufacturing techniques to integrate a phase change …

Understanding The Role Thin Film Interfaces Play In Solar Cell Performance And Stability, Mirra M. Rasmussen, Laura S. Bruckman, Ina T. Martin

Student Scholarship

As more efficient and cost-effective photovoltaic (PV) architectures are developed, solar becomes an ever more competitive and viable replacement for fossil fuels. Full grid electrification necessitates the development of efficient, reliable, cost-effective technologies - and there is room for many different kinds of PV in this expanding market. The practical challenges and constraints of terawatt PV production have brought scalability and durability into sharp scientific focus. From a materials perspective, there are commonalities in the materials questions and challenges across different PV technologies. Whereas most PV technology is referred to by the absorber layer - e.g. silicon, or perovskite solar …

Advanced Materials For High Performance Lithium-Sulfur Batteries, Jian Yang

Dissertations

With the advantages of high capacity and low cost, lithium-sulfur batteries (LSBs) have been considered as one of the most promising candidates for next-generation batteries. However, the wide adoption of LSBs to the commercial markets is limited due to the fast capacity decay and low utilization of sulfur. To address these issues, advanced cathodes with high electronic conductivity and strong affinity to elemental sulfur and lithium polysulfides, which are intermediate products during the charge/discharge process, have been developed in this program. Carbon aerogels (RFCs) with controllable porous architectures have been fabricated through adjusting the process parameters and used as the …

Targeting Lncrna Ddit4-As1 Sensitizes Triple Negative Breast Cancer To Chemotherapy Via Suppressing Of Autophagy, Ting Jiang, Jiaojiao Zhu, Shilong Jiang, Zonglin Chen, Ping Xu, Rong Gong, Changxin Zhong, Yueying Cheng, Xinyuan Sun, Wenjun Yi, Jinming Yang, Wenhu Zhou, Yan Cheng

Markey Cancer Center Faculty Publications

In this study, it is found that the lncRNA, DNA damage inducible transcript 4 antisense RNA1 (DDIT4-AS1), is highly expressed in triple-negative breast cancer (TNBC) cell lines and tissues due to H3K27 acetylation in the promoter region, and promotes the proliferation, migration, and invasion of TNBC cells via activating autophagy. Mechanistically, it is shown that DDIT4-AS1 induces autophagy by stabilizing DDIT4 mRNA via recruiting the RNA binding protein AUF1 and promoting the interaction between DDIT4 mRNA and AUF1, thereby inhibiting mTOR signaling pathway. Furthermore, silencing of DDIT4-AS1 enhances the sensitivity of TNBC cells to chemotherapeutic agents such as paclitaxel both …

Hydrothermal Liquefaction Of Saccharina Latissima For The Production Of Biofuel, Mayokun A. Oke

Mechanical Engineering Theses

We performed hydrothermal liquefaction of brown macroalga (Saccharina latissima) in the presence of homogenous and heterogenous catalysts such as KOH, Na₂CO₃, Pd/C, HZSM-5, Ce/HZSM-5, and Ni/SiO₂-Al₂O₃ in hot compressed water, to investigate their effects on product yield and composition in the biocrude. To investigate hydrocarbon production, we used methanol as co-solvent (methanol-to-water 1/4 vol.%) and as the only liquefaction solvent. We carried out the experiments in a batch reactor at 330^oC and 120-130 bar, and varying temperature, algae-to-water ratio, residence time, and pretreatment method. The biocrude yields …

A Comprehensive Study On Non-Proprietary Ultra-High-Performance Concrete Containing Supplementary Cementitious Materials, Seyedsaleh Mousavinezhad, Gregory J. Gonzales, William K. Toledo, Judith M. Garcia, Craig M. Newston, Srinivas Allena

Civil and Environmental Engineering Faculty Publications

Ultra-high performance concrete (UHPC) is a novel cement-based material with exceptional mechanical and durability properties. Silica fume, the primary supplementary cementitious material (SCM) in UHPC, is expensive in North America, so it is often substituted with inexpensive class F fly ash. However, future availability of fly ash is uncertain as the energy industry moves toward renewable energy, which creates an urgent need to find cost-effective and environmentally friendly alternatives to fly ash. This study investigated replacing cement, fly ash, and silica fume in UHPC mixtures with ground granulated blast-furnace slag (GGBFS), metakaolin, and a natural pozzolan (pumicite). To identify acceptable …