Materials Science and Engineering Commons^™

Cobalt/Carbon Composites As Sulfur Hosts For High-Performance Lithium-Sulfur Batteries, Yun-Rui Yang, Huan-Huan Dong, Zhi-Qiang Hao, Xiang-Xi He, Zhuo Yang, Lin Li, Shu-Lei Chou

Journal of Electrochemistry

Lithium-sulfur (Li-S) battery is one of the promising energy storage devices because of its high energy density. However, the sulfur cathode suffers from sluggish electrochemical reaction kinetics, slow charge transfer, large volume expansion and severe shuttle effect of lithium polysulfides inevitably resulting in low reversible capacity, poor rate performance and short cycle life, limiting its practical applications. Herein, the recent progress of cobalt/carbon composites, including cobalt nanoparticles and cobalt single atoms, as the sulfur host materials in Li-S batteries is overviewed. In general, cobalt plays the role of electrocatalyst, which inhibits the shuttle effect of lithium polysulfides, accelerates the electrochemical …

Recent Advances Of Functional Electrolyte Additives For Lithium-Sulfur Batteries, Xiu-Qing Zhang, Shuai Tang, Yong-Zhu Fu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries have become one of the most promising next-generation battery systems due to their high energy density and low cost. However, the application of Li-S batteries still faces critical challenges, such as the low conductivities of S and Li₂S, shuttle effect of polysulfides and dendrite growth of Li, etc. The optimization of the electrolyte can ameliorate the electrolyte|electrode interphase, conveniently regulating the parasitic reaction and improving the performance of the resultant batteries. The functional additives in electrolytes provide chances to tune the interphase and even the redox mechanism to improve the performance of the batteries. In …

Ultraviolet-Initiated In-Situ Cross-Linking Of Multifunctional Binder Backbones Enables Robust Lithium-Sulfur Batteries, Sha Li, Xiao Zhan, Gu-Lian Wang, Hui-Qun Wang, Wei-Ming Xiong, Li Zhang

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries show attractive prospects owing to their high theoretical energy density, but their commercialization still faces such challenges as lithium polysulfides shuttling, severe volume change and considerable polarization. These stubborn issues place higher demands on each component in the battery, such as the development of multifunctional binders with superior mechanical properties. Herein, ethoxylated trimethylolpropane triacrylate was firstly introduced into sulfur cathodes, and in-situ cross-linked by ultraviolet (UV) curing combined with traditional polyvinylidene difluoride binder (i.e., forming a binary binder, denoted as c-ETPTA/PVDF) to construct high-loading and durable Li-S batteries. The covalently cross-linked ETPTA framework not only significantly enhances …

Metals And Alloys As Catalytic Hosts Of Sulfur Cathode For Lithium-Sulfur Batteries, Zhen-Yu Wang, Xue-Ping Gao

Journal of Electrochemistry

Lithium-sulfur batteries are recognized as one of the most promising next-generation energy storage devices, owing to the high theoretical energy density of 2600 Wh·kg^–1. However, their application has been seriously hindered by the sluggish electrochemical reaction kinetics of elemental sulfur and discharged products (Li₂S₂/Li₂S), and the notorious “shuttle effect” of soluble intermediate lithium polysulfide species, leading to poor cycle stability, low sulfur utilization and inferior coulombic efficiency. Introducing catalytic hosts into sulfur cathode is an efficient path to propel the conversion of sulfur-contained species, thus preventing the dissolution and loss of active-sulfur …

Preface To The Special Issue On Lithium-Sulfur Batteries, Jia-Jia Chen, Ren-Jie Chen, Zhong Jin

Journal of Electrochemistry

No abstract provided.

Poly(Ether Imide)S: Synthesis And Properties, Rachel Price

Honors College Theses

The synthesis of strong polymers is crucial to the creation of heat-resistant, durable, and mechanically useful plastics that we use every day. Poly(ether imide)s are used in applications such as food service, aerospace, automotive, and many more. This thesis will discuss the synthesis and properties of these plastics to help express a larger understanding of these polymers.

Optical Fiber Tip Micro Anemometer, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A passive microscopic flow sensor includes a three-dimensional microscopic optical structure formed on a cleaved tip of an optical fiber. The three-dimensional microscopic optical structure includes a post attached off-center to and extending longitudinally from the cleaved tip of the optical fiber. A rotor of the three-dimensional microscopic optical structure is received for rotation on the post. The rotor has more than one blade. Each blade has a reflective undersurface that reflects a light signal back through the optical fiber when center aligned with the optical fiber, the blades of the rotor shaped to rotate at a rate related to …

High Tg, Bio-Based Isosorbide Methacrylate Resin Systems For Vat Photopolymerization, Xi Chu, Jianwei Tu, Heather Berensmann, John J. La Scala, Giuseppe R Palmese

Henry M. Rowan College of Engineering Departmental Research

The use of isosorbide-derived polymers has garnered significant attention in recent decades as a high-performance, renewable material sourced from biomass. Of particular interest is isosorbide methacrylate, which possesses low viscosity (< 500 >cps), high thermal properties (Tg ≈ 220 °C), and high modulus (>4 GPa). These characteristics present a promising opportunity to replace BPA-derived methacrylate compounds in various applications. This investigation aims to synthesize and characterize isosorbide-based low-viscosity resin systems for 3D printing. The resin blends are composed of isosorbide methacrylate and two bio-renewable methacrylates, furfuryl methacrylate (FM) and bis-hydroxymethyl-furan methacrylate (BHMF-M), polymerized through a digital light processing (DLP) technique. …

Shape Memory Polymer-Based Multifunctional Syntactic Foams, Siavash Sarrafan

LSU Doctoral Dissertations

With the increase in popularity of shape memory polymers (SMPs), especially in applications such as aerospace, textile, biomedical engineering, and even structures, the weight of the material and the devices made with it has always been a crucial factor. Using the shape memory polymer as a matrix to make a syntactic foam is one of the best and most affordable approaches to creating a lighter material that still has the shape memory effect. The addition of particles of different stiffness, strength, and size, with variable fractions, creates a composite that enables engineering the mechanical, as well as other physical and …

Lunar In-Situ Aluminum Production Through Molten Salt Electrolysis (Lisap-Mse), Jacob Ortega, Jeffrey D. Smith, Fateme Rezaei, David Bayless, William P. Schonberg, Daniel S. Stutts, Daoru Frank Han

NASA-Missouri Space Grant Consortium

The goal of Artemis is to establish a sustained presence on the Moon. To achieve so, numerous resources are necessary. The Moon contains several essential elements needed to sustain human presence. Most of those elements are trapped in the form of minerals. To refine those minerals into useful materials, reduction methods are needed. Most reduction methods on Earth require large amounts of mass and power which is unrealistic for early stages of building a lunar base. To solve this problem, we are developing a concept of Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE).

The LISAP-MSE project, if successful, …

A Guide To Fifty Years Of Research At Montana Tech: Part 2 The Treatment Of Electroplating And Electromachining Metal Hydroxide Sludge For The Recovery Of Metal Values [See Also Part 1), Larry G. Twidwell

Metallurgy

ABSTRACT and FORWARD

The treatment and recovery of metal species from hydrometallurgical solutions and wastewater solids has been and continues to be an important research topic. This presentation includes a guide to the literature with a summary discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering during the 1984-2001 period. A previous presentation (Part 1) focused on the removal of arsenic, selenium, and other species by hydrometallurgical processes and the formation of environmentally stable disposable products. This guide is available at the reference presented above.

This following presentation (Part 2) is based on …

A Guide To Fifty Years Of Research At Montana Tech: Part 1-The Treatment Of Arsenic, Selenium, Thallium, Metal Bearing Solutions And Waste Solids, Larry G. Twidwell

Metallurgy

ABSTRACT and FORWARD

The removal of arsenic, selenium, and metal species from hydrometallurgical solutions and wastewaters has been and continues to be an important research topic. This presentation includes a discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering during the past fifty years. The discussion is focused on removal of arsenic by co-precipitation with Fe(III) and Fe(II), co-precipitation with Fe(III) and Al(III), reduction using elemental iron; the removal of selenium by elemental iron and catalysed iron; and the removal of cadmium, copper, nickel, zinc by co-precipitation with Fe(III) and Al(III).

This presentation …

The Influence Of Diamine Curing Additives On The Network Architecture Of Phthalonitrile Thermosetting Polymers, Tyler J. Richardson

Dissertations

Phthalonitrile monomers undergo diamine-promoted polymerization by a complex reaction mechanism involving two competitive cure pathways, forming two primary network architectures: linear polyisoindoline chains and branched triazine crosslinks. The influence of the diamine curing additive on the polymerization pathway, and the influence of the resulting network architectures on cured network properties, have not been adequately explored within the phthalonitrile field. Two structurally different diamine curing additives, bis[4-(3-aminophenoxy)phenyl] sulfone (mBAPS) and 1,3-phenylenebis((4-(4-aminophenoxy)phenyl)methanone) (AEK-134), were studied for the polymerization of resorcinol phenylphosphate phthalonitrile (RPPhPN), where the influence of diamine structure and concentration on the polymerization behavior, network architecture, and bulk thermal and thermomechanical …

Effects Of Tempering Temperature On Gas Turbine Fan Cases, Seth Utter

Honors Scholar Theses

The project aimed to investigate the effects of tempering temperature on metals used for gas turbine engine fan cases as a major relevant concern is containing blades in during blade-out events. There are three ways to accomplish this: using a thicker metal, incorporating different materials into the case, or heat treating the metal. This project focused on the third solution: reviewing the impact toughness and hardness of fractured samples and their equivalent ductile-to-brittle transition shear faces. Given its availability, 1045 steel, as opposed to aerospace grade metals, was used for in-house testing. The data obtained from these experiments were then …

Microstructure Characterization Of Az31 Under Strain, Aaron Beckley

Liberty University Research Week

Undergraduate

Three Minute Thesis

Welding 3d Printed Structures For Composite Sacrificial Tooling, Dominic L. Perez, Kyle Gerold, Matt K. Ficker, Matthew D. Wooden, Aidan M. Dungy, Brennan G. Coit

Research & Creative Achievement Day

3D printed parts offer the ability to generate dimensioned, complex objects with minimal machining touch time and skill, but they are typically very weak and limited in size. Strong and light composite parts require tooling to be created for the fabric to lay on while the resin is curing, but tooling can be quite expensive during the prototyping phase or for low part quantity runs. This study examined the techniques required to weld smaller 3D printed parts together to form large 3D printed tools that could be used as a sacrificial tool for a composite part. In this method, the …

Carbon Cornhole, Justin O. Dailey, Blake M. Endle, Joshua J. Lebrun, Bailey J. Banaszynski, Josiah M. Gleisner

Research & Creative Achievement Day

The purpose of this design project is to create a durable lightweight yard game for players of all skill levels. Carbon Cornhole is a composite improvement on the already popular yard game, cornhole, with a new twist. The final product is based on valued feedback from customers. The board is manufactured of carbon fiber/epoxy sandwich panels with a closed cell foam core. The composite design provides a lightweight product. The panels are specifically manufactured to retain their mechanical properties when exposed to outdoor elements such as water and UV radiation. The addition of inlayed LED lights and two new "skill …

Flexural Creep Comparison To Tts Creep For Pp And Pp-Gf30, Max R. Kauphusman, Regan G. Harvey

Research & Creative Achievement Day

Creep testing is one of the most expensive datasets to acquire in both cost ($10k+) and time (2+ months). Dynamic Mechanical Analysis offers a unique opportunity to characterize creep properties of polymers using a technique called Time Temperature Super Positioning (TTSP) in a relatively short period of time. TTSP works by holding either frequency or loading constant at set temperatures for a constant period of time. WLF equations are then used to combine multiple curves from different temperatures into a master curve that can be used to extrapolate out creep performance at designated reference temperatures and save a considerable amount …

Carbon Fibers Recycling From Degraded Prepregs And Mechanical Properties Or Recycled Composite, Monjur Morshed Rabby, Minhazur Rahman, Partha Pratim Das, Vamsee Vadlamudi, Rassel Raihan

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

The size of the global composites market is anticipated to grow more than previously. Due to the rapidly rising volume of CFRP production, the waste from this material poses numerous problems and has significantly increased the socio-technological pressure to find sustainable composite recycling solutions. The problem is that recycling the composite part is challenging once its service life has expired. The same problem is true for the raw materials (prepregs) used in composite manufacturing. When the prepreg out-life/shelf-life is over, prepregs are abandoned, resulting in a loss of millions of dollars and an adverse environmental effect. In this study, the …

The Impact Of Solution Ionic Strength, Hardness, And Ph On The Sorption Efficiency Of Polychlorinated Biphenyls In Magnetic Nanocomposite Microparticle (Mnm) Gels, Angela M. Gutierrez, Thomas D. Dziubla, J. Zach Hilt

Chemical and Materials Engineering Faculty Publications

Environmental conditions of groundwater and surface water greatly vary as a function of location. Factors such as ionic strength, water hardness, and solution pH can change the physical and chemical properties of the nanocomposites used in remediation and the pollutants of interest. In this work, magnetic nanocomposite microparticle (MNM) gels are used as sorbents for remediation of PCB 126 as model organic contaminant. Three MNM systems are used: curcumin multiacrylate MNMs (CMA MNMs), quercetin multiacrylate MNMs (QMA MNMs), and polyethylene glycol-400-dimethacrylate MNMs (PEG MNMs). The effect of ionic strength, water hardness, and pH were studied on the sorption efficiency of …