Materials Science and Engineering Commons^™

Single-Atom Catalysts For Electrochemical Energy Conversion: Copper Single-Atom Catalyst For Oxygen Reduction Reaction And Quantification Of Site Density By Co Stripping Voltammetry, Dawatage Perera

Theses and Dissertations--Chemistry

Fuel cells are considered a promising technology for achieving cleaner and more sustainable energy production and utilization. However, one of the current major challenges is the economic viability associated with the extensive use of Pt group metal (PGM) catalysts, particularly on the cathode side. Therefore, non-PGM single-atom catalysts (SACs) have received considerable attention as alternatives for PGM catalysts in the oxygen reduction reaction (ORR), which occurs at the cathode of the fuel cell. Among various SAC structures, the non-PGM/nitrogen-doped carbon-based structure (M-N-C) stands out for its excellent ORR performance.

Chapter 2 illustrates the use of copper metal in place of …

Applying Synchrotron Saxs And Xas To Study The Microstructure Of Energy Conversion And Storage Materials, Lingzhe Fang

Graduate Research Theses & Dissertations

The microstructure of energy conversion and storage materials is a key determinant of physical properties and electrochemical performance. Synchrotron X-ray techniques, with their strengths of high flux and exceptional brightness, play an irreplaceable role in understanding nano and sub-nano structures. This helps the study of reaction mechanisms and benefits material design in energy conversion and storage area. Electrifying CO2 transformation using renewable energy offers a carbon-neutral solution to CO2 recycling and fuel generation. Among various feedstocks from the CO2 reduction reaction, CO, HCOOH, and CH4 have approached the performance thresholds for industry implementation. The application of single atom catalysts (SACs) …

Near Infrared Upconversion Nanoparticles Modified With Semiconducting Polymers For Anti-Counterfeiting, Abraham Chibuikem Ikeji

Dissertations and Theses

Lanthanide doped up-conversion nanoparticles (UCNPs) are excellent luminescent materials due to their ability to perform photon up-conversion from low energy to high energy using their triplet energy metastable states and because of their long-lived excited state. These properties enable multiple applications with the near infrared upconversion emission. They have been incorporated in developing technologies to help curb counterfeiting activities and other areas of research. However, they still have some limitations such as the hydrophobic nature of the UCNPs, and the absence of functional groups that can also help impact other desired features. Thus, in this work we have coated up-conversion …

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In pursuit of sustainable resource utilization on the Moon, this paper delves into modeling and characterization of particle size distribution (PSD) of lunar regolith simulants in an electrostatic system. a prototype electrostatic sieve was built and tested with four sample simulants mirroring properties of lunar mare and highland regolith. an alternating four-phase (90 degrees, 180 degrees, 270 degrees, 360 degrees) traveling square-wave was utilized for particle-directed transport to model the diverse trajectories of the particles. Numerically, we scrutinized how the distribution functions of the particles are manifested as the electrostatic field propagates, with a focus on three distinct particle ranges …

Corrosion Behavior Of Ysz And Ysz/Nico Coatings On Inconel 625 Exposed Alkali Chlorides, Resetiana Dwi Desiati, Eni Sugiarti, Bambang Hermanto, Gerald Ensang Timuda, Hubby Izzuddin, Fraya Aulia Salsabilla, Anawati Anawati

Journal of Metals, Materials and Minerals

Alkali chloride attack on boiler pipe walls is considered the main problem of corrosion in the waste-to-energy (WTE) industry, even though uses superalloy. Electrophoretic deposited (EPD) yttria-stabilized zirconia (YSZ) coating is carried out to protect the Inconel 625 substrate. YSZ is deposited directly both on the Inconel 625 substrate and NiCo-Inconel 625. Corrosion resistance was conducted using the 3.5% NaCl electrochemical test and the hot salt corrosion test at 600°C in alkaline salt media such as NaCl, KCl, and CaCl2. The potentiodynamic polarization curve shows that the YSZ coating deposited on the substrate (single-layer) has a corrosion rate of 0.065 …

Study Of Titanium Alloy Ti–Al–Zr–Nb–V During Heating Under Deformation And Its Phase Transformation Features, Aidar Kenzhegulov, Axaule Mamaeva, Aleksander Panichkin, Akerke Imbarova, Balzhan Kshibekova, Rashida Aubakirova, Nazgul Toiynbaeva

Journal of Metals, Materials and Minerals

An alloy based on Ti–Al–Zr–Nb–V was prepared and its deformation behavior at elevated temperatures was studied. The microstructure and phase of the alloys were characterized by optical microscopy, scanning electron microscopy, thermal analysis, and mechanical testing. The results showed that the Ti–Al–Zr–Nb–V alloy, when stretched, exhibits a superplasticity effect in the range of  975℃ to 1100℃, with an elongation of up to 400%. It was found that superplasticity develops in the temperature region of the α+β→β transition and is accompanied by a change in grain size and redistribution of alloying elements among phases.

One-Pot Microwave-Assisted Approach Of Polydiacetylene/Zinc Oxide Nanocomposite For Reversible Thermochromic, Chanita Khanantong, Thanutpon Srinopkun, Thitirut Boonmak, Jintana Siriboon

Journal of Metals, Materials and Minerals

This study introduces a new technique to fabricate the reversible poly(PCDA/ZnO) nanocomposites thermochromism. Our preparation process is the solution-mixing method, which is supported by microwave synthesis time instead of ultrasonic bath or stirrer. The presence of ethanol molecules in aqueous media in the solution-mixing method induces dipolar polarization. In addition, the presence of Zn2+ leaking out of the ZnO can produce ionic polarization. These factors affect the shape of poly(PCDA/ZnO) nanocomposites based on their thermochromic properties. The optical properties of poly(PCDA/ZnO) nanocomposite were determined through UV-Vis absorption spectroscopy. The morphology of this nanocomposite was examined by scanning electron microscopy, and …

Green Synthesis Of Carbon Dots From Mangosteen Peel For Fluorescent Cancer Cells, Supaluck Amloy, Tanachporn Lukprang, Monthon Lertworapreecha, Pakorn Preechaburana

Journal of Metals, Materials and Minerals

Recently, carbon dots (CDs) have received significant attention owing to their outstanding optical properties, good solubility, and low toxicity. In this research, CDs were synthesized by a hydrothermal method based on an environmentally friendly and straightforward strategy, using only mangosteen peel and deionized water. The synthesized CDs had an average size of 3.09 ± 0.38 nm. The absorbance spectrum peak for the CDs was seen at 282 nm, and the central wavelength of fluorescence emission was observed at 433 nm under an excitation wavelength of 355 nm. An aqueous solution of CDs exhibited bright green fluorescence when observed with the …

Fabrication Of Porous Geopolymers Utilizing Aluminum Wastes As Foaming Agent, Siriwan Chokkha, Jiratchaya Ayawanna, Anurat Poowancum, Thanasak Singlaem, Pusit Mitsomwang

Journal of Metals, Materials and Minerals

Porous geopolymers (PG) are attractive due to their simple fabrication and diverse applications. This work presents a method for fabricating PG by using aluminum salt slag (ASS) as a foaming agent and metakaolin (MK) as the precursor. Sodium silicate (Na2SiO3) and sodium hydroxide (NaOH) are used as alkali activator solutions. The results show that the PG is fabricated by using the sequence mixing method. ASS was milled to a size of 4 µm, then mixed with an NaOH solution for 30 min. After that, MK and Na2SiO3 solution were added. The weight ratio of Na2SiO3/NaOH and solid/liquid was 2.0 and …

Influence Of Annealing Times For W Films On The Structure And Electrochromic Properties Of Anodized Wo3 Films, Watcharaporn Thongjoon, Kamon Aiempanakit, Montri Aiempanakit, Chantana Aiempanakit

Journal of Metals, Materials and Minerals

WO3 films were prepared from annealed W films by anodization and annealing at 450℃ for 1 h. The sputtered W films were annealed before anodization at different times for 0.5 h to 2 h, followed by immediate removal from the furnace (quenching) or slow cooling (cool-down). The WO3 films exhibited a different preferred orientation between the (200) and (222) planes. The morphological structure of the WO3 films depended on the annealing time and cooling features of the W films. The WO3 films for the cool-down condition had smaller grains and more pores than the quenching condition. The WO3 films prepared …

Fabrication And Characterization Of Sb-Doped Mxene Prepared By Hydrothermal Method For Use As A Sensing Electrode For Heavy Metal Detection, Siranaree Phoohadsuan, Thitima Maturos Daniels, Mati Horprathum, Nichaphat Thongsai, Eakkasit Punrat

Journal of Metals, Materials and Minerals

MXene, a two-dimensional material with favorable physicochemical characteristics, has demonstrated outstanding efficiency in a wide range of applications because of their superior properties, such as higher surface area and conductivity, and facile surface modification. In this study, antimony (Sb) doped MXenes were synthesized via a simple hydrothermal method, employing various Sb concentrations ranging from 5%w/w to 25%w/w. The successful preparation of the Sb-doped MXene (Sb@MXene) was confirmed by an X-ray diffraction (XRD) method. Physical morphologies examined through field-emission scanning electron microscopy (FE-SEM) depict the presence of Sb nanoparticles with the size of about 80 nm on the surface and interlayer …

Realizing Fast Plating/Stripping Of High-Performance Zn Metal Anode With A Low Zn Loading, Zhuo Li, Tamene Tadesse Beyene, Kai Zhu, Dianxue Cao

Journal of Metals, Materials and Minerals

Zn metal batteries and capacitors (ZMBs/ZMCs) are gaining significant attention due to their low cost, high safety, and high theoretical capacity. However, the low utilization of Zn metal decreases the coulombic efficiency. Here, we present a novel approach to enhance the conductivity of host materials by utilizing a 3D conductive structural network of copper mesh. The 3D copper mesh serves as a high-conductive matrix and additionally coating it with Zn serves as a Zn source. Finally, a flexible reduced graphene oxide (rGO) was deposited on the Zn-coated copper mesh as an anode protective layer. The conductive copper mesh renders a …

The Effects Of The Crystallinity Index Of Cellulose On The Flexural Properties Of Hybrid-Cellulose Epoxy Composites, Nathawat Poopakdee, Warut Thammawichai

Journal of Metals, Materials and Minerals

This work investigated the effects of the crystallinity index (CI) of cellulose on the flexural properties of hybrid-cellulose epoxy composites. The CI was varied by combining cellulose microfibrils (CMF) and microcrystalline cellulose (MCC), extracted from coir and eucalyptus, respectively, in various mixing ratios. From the XRD analysis, it was shown that the CI values and the CMF/MCC content follow a parabolic-fitting pattern, reaching a maximum value of 82.06% for the CMF/MCC of 30/70. The composites with cellulose of different CI values were fabricated and the flexural properties were measured. The results showed that the flexural strength increased as the CI …

Maintenance Of The Deteriorated Infrastructure In Thailand, Pakawat Sancharoen, Sothyrak Rath, Dong Viet Phuong Tran, Pitichon Klomjit, Somnuk Tangtermsirikul

Journal of Metals, Materials and Minerals

Infrastructure has been aged and deteriorated by various causes. Maintenance of its safety and serviceability are crucial and many countries have raised concerns about the existing infrastructure. Infrastructure in Thailand has been also aged. This paper shows results of studies relating to maintenance of infrastructure in Thailand. Inspection of the existing infrastructure in Bangkok was conducted by both visual and non-destructive testing (NDT) showing many deteriorations, and damages. Most of the deteriorations are caused by low concrete covering depth and water leakage. While in marine environment, chloride attack is the main cause. Evaluation criteria for NDT results are studied and …

Properties Of Acrylonitrile-Butadiene-Styrene Nanocomposites Adding Ammonia Plasma Treated Carbon Nanotubes/Graphene Nanoplatelets For Electronic Discharge Application, Sorawit Duangsripat, Pajaera Patanathabutr, Nattakarn Hongsriphan

Journal of Metals, Materials and Minerals

Carbon-based nanofillers have been applied in various products, especially electrical and electronic products. It could be used to modify electrical conductivity of the integrated circuit (IC) polymeric packaging in order to prevent electrostatic discharge that would damage electronic integrity. This research reported the influence of ammonia plasma functionalization and its concentration on electrical, mechanical and thermal properties of Acrylonitrile-Butadiene-Styrene (ABS) reinforced with a mixture of CNTs and GNPs. Nanocomposites were successfully compounded using a twin-screw extruder, which firstly the masterbatch was prepared and then mixed with neat polymer into various concentrations (2 wt%, 4 wt%, 6 wt%, and 8 wt%). …

Adhesive Wear Characteristics Of Mono And Hybrid Cf/Ep Composite With Nano-Hap Filler, Divya Gurkar Somashekar, Naveena Bettahalli Eswaregowda, Suresha Bheemappa

Journal of Metals, Materials and Minerals

Composites materials with more than two reinforcing materials are called hybrid composites.  Tailoring the composites by hybridizing fillers, fibers and matrix will yield better properties compared to mono-composites. Hence, an effort has been made in the current research work to develop carbon fiber epoxy hybrid nanocomposites, comprising different weight percentage of Hydroxyapatite (HAP) to evaluate the potential effects on tribological properties using two body sliding wear method. Taguchi technique (L27 array) has been adopted to investigate the impact of parameters such as filler inclusion (0%, 1.5%, and 3%), load (30, 45, and 60 N), sliding velocity (1, 2, and 3 …

Effects Of Oleylamine Concentration On The Synthesis Of Formamidinium Lead Halide Perovskite Nanocrystals And Physical-Optical Properties, Kunlasatree Kunsaeng, Yingyot Infahsaeng

Journal of Metals, Materials and Minerals

Perovskite nanocrystals (PNCs) has been extensively interested owing to their distinctive properties for applications in optoelectronics and energy harvesting. The properties of these nanocrystals, including optical and energy characteristics, can be tuned by adjusting the particle size using different synthesis techniques. Among these, the ligand-assisted reprecipitation (LARP) method has become popular for its simplicity and scalability. Nevertheless, it is vital to understand that the growth of PNCs is extremely sensitive to the conditions of synthesis, highlighting the importance of recognizing the factors that limit the formation and properties of PNCs. In this study, PNCs based on formamidinium lead bromide (FAPbBr3) …

Synthesis And Visible Light Photocatalytic Activity Of Silver Zinc Phosphates, Rina Kanemoto, Hiroaki Onoda

Journal of Metals, Materials and Minerals

Currently, photocatalytic materials in common use mainly use ultraviolet light, but the amount of ultraviolet light contained in sunlight is limited and their energy efficiency is known to be low. Therefore, there is a need for a compound that shows photocatalytic activity in visible light, and silver phosphate matches this requirement, but it is relatively expensive. In this study, photocatalytic materials that could use visible light and were relatively inexpensive were attempted to be prepared. Specifically, samples were prepared by changing the silver/zinc molar ratio (Ag/Zn = 100/0, 90/10, 80/20, 70/30, 60/40), and each sample was evaluated and examined from …

Fabrication And Characterization Of Zinc Anode On Nickel Conductive Cloth For High-Performance Zinc Ion Battery Applications, Tanapoom Mawintorn, Kittima Lolupiman, Napat Kiatwisarnkij, Pattaraporn Woottapanit, Manickavasakam Karnan, Suwimon Saneewong Na Ayuttay, Xinyu Zhang, Panyawat Wangyao, Jiaqian Qin

Journal of Metals, Materials and Minerals

The development of advanced materials for energy storage is critical to addressing global energy challenges. Zinc-ion batteries offer a promising solution due to their safety, cost-effectiveness, and environmental friendliness. In this study, we enhanced the conductivity of cotton by coating it with electroless nickel, followed by zinc electroplating, to create a flexible material suitable for zinc-ion battery applications. Cotton was coated with electroless nickel at temperatures ranging from 40°C to 60°C for 1 min to 13 min. Subsequently, zinc electroplating was performed with current densities of 0.02 A·cm‒2 for 60 min, 0.03 A·cm‒2 for 40 min, and 0.04 A·cm‒2 for …

Tin, Silver, And Copper Sulfate Compound Extraction From Lead-Free Solder Dross By Reduction With Petroleum Coke, Electrorefining, Cementation, And Crystallization Process, Sakhob Khumkoa, Natthicha Ma-Ud, Tapany Patcharawit, Tanongsak Yingnakorn

Journal of Metals, Materials and Minerals

Solder dross, a waste by-product from the electronic component dipping bath, contains significant quantities of valuable metals. This study presents a four-step process for recovering tin, silver, and copper from lead-free Sn-Ag-Cu solder dross. The process involves the initial reduction of the dross using petroleum coke to produce an anode plate, followed by electrorefining to extract tin from the anode plate. Selective leaching of silver and copper from the residual anode slime and cementation techniques are employed to recover silver powder. The rest of the copper solution was used to synthesize copper sulfate crystals. Experimental results demonstrate optimal conditions for …