Materials Science and Engineering Commons^™

Inherently Porous Metal Structures With Sufficient Mechanical Properties Through Direct Writing Of Bio-Based Inks, Havva Eda Aysal

Graduate Theses, Dissertations, and Problem Reports (ETD)

There is currently a burgeoning interest in developing 3D printed metal structures with inherent porosity and sufficient mechanical properties for mass customization in the biomedical field. Current approaches for 3D printing of biocompatible metals rely on powder-bed fusion methods which are energy intensive and utilize large amounts of metal powder that is challenging to recycle. In addition, such methods aim on producing dense parts and porosity generation, within the printed part, is challenging due to the complex physics of the melting pool. Here, a relatively new and promising approach is undertaken to study the 3D printing of inherently porous structures …

Laser Deposition Additive Manufacturing Of Multi-Material And Metal-Ceramic Composite Structures, Manikanta Grandhi

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasing performance requirements of modern industrial systems, coupled with the imperative for decarbonization, necessitate a fundamental rethinking of metallic component design and manufacturing. Traditional materials, with their inherent limitations in property optimization, susceptibility to degradation, and weight constraints, are proving insufficient. Multi-material joining offers a potential solution, enabling designers to strategically integrate diverse materials with specific, tailored properties into single component. Functionally graded materials (FGMs) and oxide dispersion strengthened (ODS) materials are prime examples of this approach, delivering substantial improvements in wear resistance, thermal regulation, high-temperature resilience, and overall weight efficiency. However, conventional manufacturing approaches further exacerbate the limitations …

Novel Membrane Materials For Nutrient Recovery From Nutrient-Rich Resources, Km Prottoy Shariar Piash

Graduate Theses, Dissertations, and Problem Reports (ETD)

Global demand for fertilizer production is expanding substantially to meet the food demand of an increasing world population. Anaerobic digestate (AD) of various centralized wastewater facilities contains substantial amounts of ammonium (NH₄⁺) (300-800 mg/L), potassium (K⁺) (13-120 mg/L), and phosphorus (P) (30-100 mg/L)- based nutrients. In addition to reducing energy costs and CO₂ emissions compared to conventional fertilizing raw material manufacturing, recovering nutrients from these waste streams could help mitigate problems such as eutrophication, which otherwise incurs billions of dollars losses to US economy annually. Apart from nutrients, wastewater streams also contain organic pollutants …

Machine Learning-Assisted Multiscale Simulation And Design Optimization Of Composite Jackets Under Low-Velocity Impacts, Masoud Mohammadi

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research presents the development of a data-driven machine learning-assisted approach to simulate and optimize the design of composite materials subjected to low-velocity impacts. It focuses on a specific type of hybrid composite comprised of fiberglass and Kevlar fabrics stitched with Kevlar threads. The study begins by creating a multiscale finite element simulation for the composite under a low-velocity impact, which operates across three scales: microscale, mesoscale, and macroscale. This simulation accepts various inputs, such as different layer configurations and orientations, and provides impact outputs including maximum load and energy absorption capacity and displacement at failure.

Python and MATLAB scripts …

Economic Profitability Of Sustainable Buildings Industry, Mohanad Ibrahim Altuma, Hanadi Abdulridha Lateef, Ayad Abdulkhaleq Al-Yousuf

Al-Esraa University College Journal for Engineering Sciences

The increasing global awareness of the Earth's deteriorating condition and the unpredictable effects of climate change has given rise to worldwide phenomena that impact several elements like the economy, agricultural security, water availability, and energy supplies. Buildings contribute significantly to the generation of greenhouse gases, as well as the disposal of pollutants and energy consumption. Therefore, they play a crucial role in addressing environmental issues.

Although sustainable buildings are widely acknowledged as a potential advancement, professionals in the property market still believe that the upfront costs of creating sustainable buildings are significantly higher than those of conventional buildings. This view …

Designing A Visual Control Framework Based On Feature Point Analysis To Guide Robots In Uncharted Areas, Isam Sadiq Rasham Al-Ghadhbawi

Al-Esraa University College Journal for Engineering Sciences

Image processing may be made more accurate and efficient with the use of optical processing technologies. In order to make better design judgments early in the package design process, visual packaging art simulation aims to swiftly develop realistic packaging effects. Conventional simulation techniques frequently yield findings that are neither realistic or detailed, and they also take a lot of time and human resources. Optical processing-based machine vision technology can fully utilize computer vision and image processing techniques to simulate package designs accurately and efficiently. This research proposes a foundation for machine vision technologies based on image optical processing. Real package …

Machine-Learning-Assisted Design Of Deep Eutectic Solvents Based On Uncovered Hydrogen Bond Patterns, Usman Lame Abbas, Yuxuan Zhang, Joseph Tapia, Md Selim, Jin Chen, Jian Shi, Qing Shao

Markey Cancer Center Faculty Publications

Non-ionic deep eutectic solvents (DESs) are non-ionic designer solvents with various applications in catalysis, extraction, carbon capture, and pharmaceuticals. However, discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation. The search for DES relies heavily on intuition or trial-and-error processes, leading to low success rates or missed opportuni- ties. Recognizing that hydrogen bonds (HBs) play a central role in DES formation, we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning (ML) models to discover new DES systems. We first analyze the …

Effects Of Additions On The Microstructure, Macrostructure, And Mechanical Properties Of Gray Iron, Evan J. Carter

College of Graduate Studies: Theses & Dissertations

The iron matrix is a major component of the gray iron (GI) microstructure, which is the transformation product of austenite during solidification. It is generally accepted that the structure of the austenite will impact the final grain structure and thus the properties of GI. Refinement of the austenite grain structure has the potential to increase the strength of GI. Knowledge of controlling austenite grain size with common alloy additions in GI is very limited and is investigated in this research. Utilizing the DAAS heat treatment process, the austenite grain boundaries can be retained and observed directly. The observations were correlated …

Investigation Of Mechanically Fatigue Low-Frequency Energy Harvesting Effects On Isotropic Materials, Daniel J. Meade

College of Graduate Studies: Theses & Dissertations

This research project reports an exploratory investigation of energy harvesting effect on isotropic material that goes through low frequency mechanical fatigue. Energy harvesting is a growing field of study that can recycle ambient energy back into a system that would otherwise be lost. This is a significantly useful method for the ongoing energy crisis and provides an alternate route to design and upgrade systems to be more efficient and last longer than current system designs. However, it is time to investigate if there is any effect vibration-based energy harvesting has on the structure from which energy is being harvested. To …

Natural Convection Heat Transfer Characteristics Of Sierpinski Carpet Fractal Fins In Horizontal And Vertical Orientations, Ayomide Ayoola

College of Graduate Studies: Theses & Dissertations

This study investigates the thermal performance of fins with perforations inspired by the Sierpinski carpet fractal pattern under natural convection conditions in both vertical and horizontal orientations. The objective is to analyze the effects of fractal iteration levels on three primary performance metrics: efficiency, effectiveness, and effectiveness per unit mass. Experimental evaluations were conducted for fractal fins from iterations 0 through 4, utilizing aluminum material, with each fin heated to controlled conditions. The results reveal that efficiency generally decreases with higher fractal iterations, reflecting increased thermal resistance associated with greater porosity and complex geometry. However, effectiveness per unit mass improves …

A Precision-Controlled Investigation Into The Fundamentals Which Drive The Incredible Superhydrophobic Properties Of Soot, Ashton Bressler

Theses and Dissertations

A PRECISION-CONTROLLED INVESTIGATION INTO THE FUNDAMENTALS WHICH DRIVE THE INCREDIBLE SUPERHYDROPHOBIC PROPERTIES OF SOOT

By Ashton Bressler

A thesis submitted as a partial fulfilment of the Virginia Commonwealth University requirements for a Masters of Science at Virginia Commonwealth University.

Virginia Commonwealth University, 2024.

This thesis investigates a precision controlled superhydrophobic soot surface, composed of semi-rigid linked chains of spheres, with a radii of roughly 14um. These spheres have exceptionally useful hydrophobic properties due to; their large surface area, their large triple phase line length, their low area fraction of solid-liquid interface, their ability to deform, and their strength from both …

Extrusion-Based Additive Manufacturing Of Magnetic Heat Exchange Structures For Caloric Applications, Vaibhav Sharma

Theses and Dissertations

Currently, the commercial building sector accounts for 18% of total U.S. end-use energy consumption, of which almost a third was from on-site combustion of fossil fuels for space and water heating. Magnetic heat pumping (MHP) technology is an energy-efficient, sustainable, environmentally-friendly alternative to conventional vapor-compression cooling technology. Several MHP designs today are predicted to be highly energy efficient, on condition that suitable working materials can be developed. This materials challenge has proven to be daunting due to issues associated with intricate synthesis/post-processing protocols and complications related to shaping the mostly brittle magnetocaloric alloys into thin-walled channeled regenerator structures to facilitate …

Advanced Synthesis And Rational Design Of Support Structures For Nobel Metal Heterogeneous Catalysis: Towards Enhanced Activity And Continuous Processes, Brian R. Clark

Theses and Dissertations

The field of catalysis has a wide-ranging impact. Our group has identified the constant need for improved catalytic activity in high-impact applications such as hydrosilylation and cross-coupling reactions. For these reactions, precious metal catalysts often exhibit markedly better performance than their counterparts, but they can be a significant process cost that decreases overall economic efficiencies. To address this challenge, we explored support structures that can enhance catalytic activity at low metal loadings and improve precious metal recovery through simple filtration. We found that a platinum on graphene nanoplatelet catalyst (PtGNP) synthesized via strong electrostatic adsorption with microwave irradiation (SEA-MW) exhibits …

Change Of Metal Oxidation State At High Temperature, Impact Of Temperature And Reactive Gases, Yegor Nikitin

Dissertations and Theses

The fundamental understanding of gas-solid reactions enables a wide range of applications to be developed and improved. Specifically, the use of metal-based materials is critical to ensuring robust, safe, and long-term operations. For example, in power systems where boilers are used to generate steam for heat or electricity generation the use of stainless metal alloys is critical to allow high quality steam to be produced in a very harsh environment. Alternatively, in catalysis, the use of metal doped heterogeneous catalysts are essential in achieving selectivity and conversion performance for chemical synthesis to emissions abatement. Typically, these metal alloys must withstand …

The Effect Of Nanoconfined Liquid Properties On The Water-Responsive Behavior Of Bacterial Cell Walls, Seungri Kim

Dissertations and Theses

Water-responsive (WR) materials have the ability to mechanically swell and shrink in response to changes in relative humidity (RH). These WR materials are used by many biological systems to perform essential tasks; for example, pinecones use WR materials to release their seeds in dry environments, and wheat awns open and close to propel seeds into the soil, driven by daily RH changes. The WR actuation of some biomaterials is extremely powerful, for example Bacillus subtilis cell walls display record-high actuation energy and power densities of 72 MJ m^-3 and 9.1 MW m^-3, surpassing those of all existing …

Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev

Theses and Dissertations

Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the Mg_Ga acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …

Thermomechanical Process Simulation And Quantification Of Nanoscale Precipitation Influencing Ductility And Strength During Alloy Processing, Alyssa Stubbers

Theses and Dissertations--Chemical and Materials Engineering

Experimental process simulation and quantification of microstructure development during processing are challenging due to limitations with machinery temperature capability, inadequate resolution and sampling volume of currently available characterization techniques, and difficulty characterizing material microstructures as close to processing-relevant conditions as possible. This dissertation addresses how process simulation can be performed using Gleeble thermomechanical technologies and how microstructure development during these processing simulations can be quantified both in-situ and ex-situ.

The first portion of this dissertation demonstrates how Gleeble technologies can be applied to simulate complex material processing conditions in order to produce process-property profiles that can be used to inform …

Faceting Of Tungsten Via Environmental Control Of Temperature, Pressure And Chemistry, And Evolution Of Thermionic Cathode Materials, Huanhuan Bai

Theses and Dissertations--Chemical and Materials Engineering

Scandate cathode presents a great potential of being used as electron emitters in vacuum electron device due to its excellent emission performance. However, it is burdened by several issues, including poor emission uniformity, inadequate reproducibility, and limited lifetime, which have impeded its further industrial application. Therefore, extensive efforts and studies need to be conducted to obtain a more comprehensive understanding of scandate cathode.

W particles, as the base material, play a fundamental role in scandate cathode. Most recent experimental research has reported that the highly faceted crystallography of W grains contributes to the properties of scandate cathode. In order to …

Experimental Characterization And Quantification Of Deformation Behavior In A Porous Carbon Fiber Network, Robert N Quammen

Theses and Dissertations--Chemical and Materials Engineering

Due to their wide range of attractive functional properties (such as low thermal conductivity and low density) porous materials are utilized in a variety of applications. In order to characterize these properties and others, the intrinsically heterogeneous microstructures of these materials need to be taken into account. These microstructures result in interactions across multiple length scales spanning several orders of magnitude. This makes the creation of robust computational models and straight-forward predictions of mechanical properties difficult for porous materials. With this in mind, this dissertation aims to provide experimental mechanical and deformation information spanning the length scales of interest for …

Novel Precursors For Carbon Fiber Prepared By Direct Carbonization, Leah Noble

Theses and Dissertations--Chemical and Materials Engineering

For decades carbon fiber-based composites have been most heavily employed in lightweight, structural applications where low density and high strength are necessary, most notably within the aerospace industry. However, the advancement of carbon fiber into a wider array of industries has largely been limited by the high financial and energetic costs associated with its manufacture. Moreover, with an increasing societal emphasis on sustainability, there is an ever-growing desire for low-energy carbon fiber production pathways. One such pathway is the conversion of precursor fiber to carbon fiber by direct carbonization, wherein the energy-intensive, pre-carbonization stabilization step is omitted from the carbonization …