Other Materials Science and Engineering Commons^™

Nanoclays And Curcumin Based Food Packaging Material For Intelligent Food Packaging Applications, Kalpani Y. Perera, Swarna Jaiswal, Amit K. Jaiswal, Shubham Sharma

Articles

Bionanocomposite packaging eco-friendly alternatives with enhanced characteristics. This study aimed to develop a bionanocomposite intelligent packaging. Sodium alginate, gelatin, Curcumin (Cur), glycerol, and Nanoclay (NC) films were prepared. The influences of nanoclay and curcumin on the surface, optical, mechanical, chemical, barrier, and pH-indicating properties were studied. The results showed that the lightness of films was reduced by 1.28 folds compared to NC (control) film, while the yellowness of films increased by 5.82 folds. Film transparency was reduced by 9.3 folds and a 3.46 folds increase in UV barrier properties was observed compared to NC (control) film. The highest tensile strength …

Cold Plasma Technology In Food Packaging, Kalpani Y. Perera, Jack Prendeville, Amit K. Jaiswal, Swarna Jaiswal

Articles

Cold plasma (CP) is an effective strategy to alter the limitations of biopolymer materials for food packaging applications. Biopolymers such as polysaccharides and proteins are known to be sustainable materials with excellent film-forming properties. Bio-based films can be used as an alternative to traditional plastic packaging. There are limitations to biopolymer packaging materials such as hydrophobicity, poor barrier, and thermos-mechanical properties. For this reason, biopolymers must be modified to create a packaging material with the desired applicability. CP is an effective method to enhance the functionality and interfacial features of biopolymers. It etches the film surface allowing for better adhesion …

Carbon Fibers From Bio-Based Precursors Derived From Renewable Sources, Sagar Kanhere

All Dissertations

Carbon fibers have the highest strength and modulus among all known fibers and are used as reinforcements in high-performance composites [1]. Carbon fibers also have a very low density relative to metals. Therefore, carbon fibers possess ultrahigh specific strength and modulus, which make them desirable for high-performance light-weight composites. A vast majority of commercial carbon fibers are produced from PAN precursors that are expensive, which limits the use of PAN-derived carbon fibers to aerospace applications (e.g., airplanes). However, for costsensitive applications, there is a need for low-cost, moderate performance carbon fibers. Lignin is a low-cost by-product of pulping and biorefining …

Effects Of Surface Noise On Printing Artifacts: An Artistic Approach To Hiding Print Artifacts, Samuel New

All Theses

This research focuses on improving the quality of Fused Filament Fabrication (FFF) 3D printing by using fractal noise to mask certain print artifacts (e.g. layer lines and stair-stepping). The use of textures is quite common in digital sculpting for aesthetic reasons. This study focuses on finding specific textures that minimize visible 3D print artifacts.

An Application Of Optimized Bistable Laminates As A Low Velocity, Low Impact Mechanical Deterrent, Graham Lancaster

All Theses

This research considers the problem of using bistable laminates as a mechanical deterrent to the impending impact of a particle. The structure will be controlled through an algorithm that will utilize piezoelectric devices to activate them in unison with the bistable laminate to successfully deter. A novel experimental setup will be constructed to ensure that the bistable laminate stays fixed when acting as a mechanical deterrent. Piezoelectricity is the main driving force of the bistable laminate to morph and this study will use a Macro Fiber Composite (MFC) actuator that contains piezoelectric ceramic rods in a patch to transfer electrical …

Wet Chemical Synthesis And Properties Of Argyrodite Sulfide Solid Electrolytes For Solid State Lithium Batteries., William Arnold

Electronic Theses and Dissertations

The commercialization of the lithium-ion battery (LIB) in 1991 was responsible for the explosion in portable electronic technologies that has been seen over the past 30 years. With the advent of electric vehicles and other high-powered technologies, there is tremendous demand for LIBs with higher energy density and high safety. To achieve this, new electrode materials must be explored. The obvious choice of anode material would be pure metal lithium, which has a theoretical specific capacity of 3860 mAh g^-1 . Unfortunately, metal lithium anodes have not been widely commercialized due to their tendency to react violently with the …

Biodegradable Active Bio-Nanocomposite Film For The Enhanced Shelf Life Of Tomatoes, Kalpani Y. Perera, Shubham Sharma, Brendan Duffy, Amit K. Jaiswal, Swarna Jaiswal

Articles

The increased environmental pollution has led to finding sustainable solutions for non-renewable plastic-based food packaging materials. Thus, the use of biomaterial-based packaging material has become an immense trend. This work aims at developing an antimicrobial biodegradable chitosanalginate bio-nano composite film with TiO2 nanoparticle (NPs) for food packaging applications. The film was developed by a solution casting method. The chemical, mechanical, thermal, barrier, antimicrobial, and biodegradable properties of the packaging films were evaluated. Packaging studies were performed for 15 days for cherry tomatoes. The designed packaging material had enhanced the mechanical properties with a significantly (p < 0.05) higher tensile strength of 15.76 folds and 2 fold higher elongation at break. The UV barrier properties increased by 88.6%, while the film transparency decreased by 87.23%. Molecular interaction of N-H covalent bonds was observed between alginate and chitosan together with TiO2 NPs. The developed bio-nano composite film showed antimicrobial activity against foodborne pathogens E. coli, S. aureus, S. typhi, and L. monocytogene with a log reduction of 7.08, 7.28, 6.04 & 6.02 log CFU/ml respectively at 24 hours incubation period. The film was completely biodegraded and a weight loss of 89.06% was observed in bio-nanocomposite film during the 3 months. Shelf-life estimation of cherry tomato using developed packaging films showed an increase in the shelf-life up to 8 days with stable pH, total soluble solids, and weight with no bacterial growth when packaged with prepared film. Owing to their improved mechanical, UV barrier, antibacterial, and biodegradability, the prepared active bio-nano composite packaging films could be considered a potential candidate for fruit packaging.

Sodium Alginate, Nanoclay And Curcumin Based Food Packaging Material For Intelligent Food Packaging Applications, Kalpani Y. Perera, Máille Hopkins, Shubham Sharma, Brendan Duffy, Amit K. Jaiswal, Swarna Jaiswal

Articles

Bionanocomposite food packaging contains materials of biological origin which display high-performance activity when compared to biopolymers and are eco-friendly alternatives to conventional packaging materials. Intelligent packaging monitors the condition of the food or environment surrounding the food and communicates changes to the consumer. This study aimed to develop a bionanocomposite intelligent packaging material by utilising sodium alginate, nanoclay and curcumin. Sodium alginate (2 W/V% SA) film incorporated with 0.3 W/V% curcumin (Cur), glycerol, and nanoclay (NC) in various concentrations (0, 0.5, 1 and 2 W/V %) was prepared using the solvent casting method. The influences of nanoclay and curcumin on …

Synthesis Of A Phosphorus-Based Epoxy Reactive Flame Retardant Analog To Diglycidyl Ether Of Bisphenol A (Dgeba) And Its Behavior As A Matrix In A Carbon Fiber Composite, Mustafa Mukhtar

Chemical and Materials Engineering Faculty Publications

This paper describes the synthesis of a phosphorus-based flame retardant that is a chemical analog of diglycidyl ether of bisphenol A (DGEBA), as well as its incorporation as a matrix into carbon fiber laminates. Carbon fiber composites, if used for structural applications in mass transport vehicles (aircraft, trains), will require some aspects of improved fire performance to be used safely in those applications. The first phase of work involved the development of two separate synthesis routes to produce the flame retardant monomer, referred to as Phosphorus-DGEBA or simply P-DGEBA. The second step was to determine the viability of the compound's …

Identification Of Lithocholic Acid As A Molecular Glass Host For Room-Temperature Phosphorescent Materials, John J. Flynn, Zachary M. Marsh, Douglas M. Krein, Steven M. Wolf, Joy E. Haley, Erick S. Vasquez, Thomas M. Cooper, Nicholas P. Godman, Tod A. Grusenmeyer

Chemical and Materials Engineering Faculty Publications

Lithocholic acid was identified as a molecular glass host material for room temperature phosphorescent (RTP) chromophores. Differential scanning calorimetry (DSC) was performed on a series of structurally similar, biologically sourced molecules, including lithocholic acid, β-estradiol, cholesterol, and β-sitosterol, in an effort to identify new amorphous molecular glasses independent of plasticizing additives. DSC analysis revealed lithocholic acid and β-estradiol form stable molecular glasses post thermal processing unlike neat cholesterol and β-sitosterol. The ability of lithocholic acid and β-estradiol to stabilize high wt. % loadings of d10-pyrene and a mixture of d10-pyrene and an iridium chromophore, bis(2,4-difluorophenylpyridinato)-tetrakis(1-pyrazolyl)borate iridium(III) (FIr6), was also investigated. …

Could The Inclusion Of Certain Building Information And Modelling Aspects Into The Leaving Certificate Engineering Syllabus, Aid The Transition Of Students Into Third Level Education, When Choosing A Course Within The Construction Industry, Joseph Boyle, Deborah M. Brennan

Capstone Reports

The paper investigates the effects of implementing several Building Information and Modelling (BIM) aspects into the Leaving Certificate Engineering Syllabus and examines the impact this has on students choosing third level Architectural Engineering and Construction (AEC) industry courses with the desire of improving the shortage in the sector. The method and content of the study was based on academic research on second level education in other European countries through the lens of a Literature Review. A sixteen-week pilot program was trialed with over one hundred students at Senior Cycle. The outcomes of the study were critically evaluated through stakeholder interviews …

The Fractionation Of Woody Biomass With Bifunctional Aryl Sulfonic Acids At Mild Conditions, Duo He

Dissertations

Fractionation of lignocellulose is a fundamental step in the valorization of cellulose, hemicelluloses, and lignin to produce various sustainable fuels, materials, and chemicals. Over the years, most fractionation processes are cellulose centered or lignin-first. However, regardless of the fractionation strategy, the previous reported fractionation processes either need high temperature and high pressure or intensive size reduction of lignocellulose prior to the process. Therefore, there is a need to develop low energy and rapid delignification with simplistic recovery of chemicals for advanced utilization of renewable and biodegradable lignocelluloses for the future biobased economy.

To address this need, an innovative and scalable …

Development Of Smart Wearable Sensory Systems On Flexible And Fabric Platforms For Health Monitoring Applications, Simin Masihi

Dissertations

Wearable sensing technology has recently received an increased attention in both research and commercialization phases and has moved from a vision of science fiction to reality with a wide variety of applications. This incredible growth can be attributed to several factors, such as affordability and ergonomics provided by advances in flexible electronics. The other factors that realized wearable sensing technology include a critical need for more accessible health care services experienced during the recent COVID pandemic, integration to the Internet of Things (IoT), and a growing consumer desire for health awareness. This dissertation presents the fulfillment of three main projects …

Quantum-Mechanical Evaluation Of Defects In Uranium-Bearing Materials, Megan Hoover

All Dissertations

Quantum-mechanical calculations using density functional theory with the generalized gradient approximation were employed to investigate the effects dopants have on the uranium dioxide (UO₂) structure. Uraninite is a common U⁴⁺ mineral in the Earth's crust and an important material used to produce energy and medical isotopes. Though the incorporation mechanism remains unclear, divalent cations are known to incorporate into the uranium dioxide system. Three charge-balancing mechanisms were evaluated to achieve a net neutral system, including the substitution of (1) a divalent cation for a tetravalent uranium atom and oxygen atom; (2) two divalent cations for a tetravalent …

Computational Characterization Of Nonwoven Fibrous Materials: Transport And Wetting Properties, Fang Wang

All Dissertations

Nonwoven fibrous materials represent a platform of flexible material substrates. Nonwovens are widely used in the production of napkins, paper, filters, wound covers and face masks. In addition, for many applications, nonwoven materials interact with fluids. For example, in filtration applications, nonwoven materials are used to clean fluids containing solid particles or emulsified droplets. The filtration performance is affected not only by the geometrical arrangement of fibers in non-woven materials but also wettability of fibers. Understanding the transport properties of nonwoven materials and interactions between the dispersed droplets and solid substrate is crucial for the design and optimization of filter …

Controlled Manipulation Of Droplets On Fibers: Fundamentals And Printing Applications, Yueming Sun

All Dissertations

In this dissertation, the drop interactions with a single fiber is discussed under an application angle for the development on new Drop-on-Demand (DOD) printhead using a fiber-in-a-tube platform[1] to print highly viscous materials[2]. To control the drop formation and manipulation on fiber, one needs to know how the fiber wetting properties and the fiber diameter influence drop formation. And then, one needs to know the effects of fiber movement in the device on drop formation. These two questions constitute the main theme of this dissertation.

Before this study, it was accepted that the liquids could not form axisymmetric droplets if …

Creep Behavior Of A Ti-Based Multi-Principal Element Alloy, Benjamin Elbrecht

All Theses

Abstract

The understanding of microstructural damage mechanisms is the foundation of better understanding existing materials and future material development. There are significant challenges to measuring these damage mechanisms in-situ as continuous observation of the state of the microstructure is difficult or impossible for many experimental setups. This thesis presents a method for measuring grain boundary sliding (GBS) and local strain concentrations in-situ via a Heaviside function based algorithm. GBS is the shearing of two grains along their shared grain boundary and is a common damage mechanism in creep which presents as a discontinuity that can be measured with a Heaviside …

Rheological Properties And Structural Build-Up Of 3d Printed Magnesium Potassium Phosphate Cement, Hui Zhi Zhao

International Conference on Durability of Concrete Structures

This paper focuses on the rheological properties of 3D printed magnesium potassium phosphate cements (MKPCs) with different magnesium-to-phosphate (M/P) mass ratio, MgO fineness and supplementary cementitious materials (SCMs) types. The variable shear rate tests were used to monitor the extrudability. The highest slope of the evolution of storage modulus (G') and the maximum static yield stress (M_τs) value were used as an indication of the rigidification rate. The increased M/P mass ratio, MgO fineness and SCMs addition resulted in the promoted structural build-up of 3D printed MKPCs. The consistency between the evolution of G' and M_τs with …

Mechanical Properties And Microstructure Of High Strength Lc3 Pastes With Varying Limestone/Calcined Clay Ratios And Different Curing Conditions, Yemin Dong

International Conference on Durability of Concrete Structures

研究（抗施工蒸馏）石石和石榴石在淀粉胶系统（即0标准和低水印）下的水胶系统（即0标准和低水墨）X射线比、水量值水量-电子背基相关研究.61.25 .25.25.25.0.25.25.25.25.25.0.25.25.25.25.25.1.25.7.25.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.25.1.25.25.1.25.1.25.1.25.1.25.1.25.1 .25.1.25.1.25.1.25.1.25.1.25.0.0.0.0.0.0.0.00.0.0.1.25.1.25.1.25.1.25.1.25.0.0.0.00.0.0.0.0.0.0.0.0.0.0.0.0.0.00.0 .00.0.00.X射线比值、水量-电子显微镜相关研究测量值。早期的水泥水化程度小水的压合含煤量，降低了水泥石的。因此，需要采用合适的钙铝内容和体系以提高碳系统的性能。

Mechanical And Thermal Insulation Properties Of Clay-Based Lightweight Concrete, Chuang Shi, Chuanlin Hu

International Conference on Durability of Concrete Structures

建材生产和住宅采暖将消耗大量能源并排放大量CO_2。在混凝土制备中，使用陶土制备具有优异隔热性能的轻质混凝土，并使用煅烧粘土代替部分波特兰水泥，可以大大降低能耗。本研究采用页岩陶土和陶砂分别作为粗骨料和细骨料制备轻质混凝土。首先，确定最佳体积砂比。然后，使用煅烧粘土和石灰石的剂量从30%，50%到70%。研究了煅烧粘土和石灰石含量对混凝土微观结构、力学性能和隔热性能的影响。结果表明，最佳体积砂比为50%。当煅烧粘土和石灰石的用量为30%时，强度在所有年龄段最高，28 d时强度可达33.6 MPa，比对照组高12%。当更换水平不断增加时，所有年龄段的实力开始下降。所制备的粘土基轻质混凝土的导热系数低至0.144 W/mK，表现出优异的保温性能。本研究制备的轻质混凝土具有较高的强度和优异的保温性能，具有良好的应用前景。