Civil Engineering Commons^™

Environmental Study Of The Release Of Btex From Asphalt Modified With Used Motor Oil And Crumb Rubber Modifier, Daniel Bergerson, Magdy Abdelrahman, Mohyeldin Ragab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The need to be more environmentally conscious has recently shifted toward the forefront of society. With this new focus on environmentally responsible behavior comes the practice of using recycled materials in construction when possible. Therefore it is necessary to carefully evaluate the safety of any recycled materials being used in pavement materials. Under this study, a reference of testing is presented and implemented to test leachate of samples of two different asphalt binder types containing used motor oil (UMO) and/or crumb rubber modifier (CRM) for the presence of benzene, toluene, ethylbenzene, and xylenes (BTEX). Alongside batch leaching tests, air testing …

Electrochemical Disinfection Of Municipal Wastewater Using Alternating Current, Xavier A. Chavez Reyes

LSU New Orleans Theses and Dissertations

This research focused on chlorine-free disinfection of wastewater by complying with today's regulations. The equipment used was a continuous flow electrochemical reactor connected to an alternating current (AC) power supply. The electrodes used were made out of titanium coated with iridium oxide. To determine the inactivation of Escherichia Coli, a bacterial count method based on the USEPA method 1603 was used.

After several experiments it was determined that electrochemical disinfection using AC was not efficient and economic enough to be classified as a viable alternative to chlorine disinfection. It was demonstrated that chlorine can be produced by electrolysis using AC …

2014 Fall Engr333 Project Final Report, John Sherwood, Jonathan Crow, Nicolaas Ourensma, Zak Devries, Andy Frandsen, Jack Kregel, Ryan Rhodes, Connor Vandongen, Schieffer Kwong, Jee Myung Kim, Matthew Deyoung, Jeff Demaagd, Tyler Devries, Doug Faber, Garrick Hershberger, Jake Derooy, Dustin Brouwer, David Evenhouse, Patrick Anderson, Thomas Brown, Ed Smit, Joel Smith, Thane Symens, Kaitlyn Weinstein, Seth Koetje, Nick Memmelaar, Austin Juza, Matt Ramaker, Ryan Demeester, Jordan Newhof, Wes Richards, Josh Vanderbyl

ENGR 333

The net-zero homes project that this class worked on throughout the semester was designed to determine what it would take to bring a home in Grand Rapids, Michigan to the status of net-zero and whether or not it is feasible to do so. The idea behind a net-zero home is to reduce the energy usage in the home, whether it is by lifestyle changes, insulation additions, or by appliance upgrades, and then produce the remaining energy deficit from renewable sources, so that the homeowner has a net usage of zero at the end of the year. This report details the …

Functionalized Graphitic Nanoreinforcement For Cement Composites, Nima Zohhadi

Theses and Dissertations

Physical and mechanical properties of graphitic nanomaterials, in particular multiwalled carbon nanotubes (MWCNTs) and graphene nano-platelets (GNPs) make them promising candidates for nanoreinforcement of cement composites. The two key challenges associated with the incorporation of MWCNTs and GNPs are to attain uniform dispersion and interfacial bonding within the composite matrix. The effects of three main-stream dispersion techniques (namely, ultrasonication, acid-etching, and surfactant-coating) on the mechanical properties and microstructure of MWCNT- and GNP-cement composites were experimentally studied. Compressive strength tests and different characterization techniques including dynamic light scattering, Raman spectroscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission …

Context-Sensitive Seismic Strengthening And Repair Of Substandard Confined Masonry, Rahim Ghorbani

Theses and Dissertations

Confined masonry (CM) is a construction system consisting of load-bearing masonry panels that are confined with cast-in-place reinforced concrete tie columns and beams. Due to satisfactory seismic performance, CM has become the predominant low-rise residential construction system in several areas around the world. However, in developing regions, the use of substandard materials, details and construction practices may result in inadequate performance as highlighted in the 2010 earthquakes in Haiti and Chile. In the aftermath of an earthquake, households are often reluctant to reoccupy their dwellings due to concerns about safety of structures. If feasible, preventive (pre-hazard) strengthening or structural repair …

Scheduling Of Container Handling Equipment In Marine Container Terminals, Narges Kaveshgar

Theses and Dissertations

To improve the competitiveness of marine container terminals, it is critical to minimize the makespan of a container vessel. The makespan is defined as the latest completion time among all handling tasks of the container vessel. Lower makespan (i.e. lower vessel turn time) can be achieved through better scheduling of the container handling equipment during vessel operations. The scheduling of terminal equipment is an operational problem, and a detailed schedule for each type of equipment operating in the terminal is necessary. Several studies have applied operations research techniques to optimize the processes of equipment in a terminal. This dissertation investigates …

An Engineering Approach For The Design Of Archaeological Reburial Systems, Angel Ari Perez Mejia

Theses and Dissertations

Archaeological sites are a non-renewable resource which is often our only link to the past. However, sites are under constant threat of destruction due to construction activities. Civil engineers and archaeologists must the work together to ensure both the continued survival of archaeological sites while allowing for development to continue. Reburial systems, when properly designed and constructed, allow for the protection of archaeological sites while allowing the continued use of the land. However, because reburial as an intentional conservation technique is relatively modern, practice is fragmented and there are no universally accepted guidelines. Current reburial system design relies on prescriptive …

Seismic Performance Of Precast Girder-To-Cap Beam Connections Designed For Abc, Sri Sritharan, Justin Vander Werff, Robert Peggar, Ron Bromenschenkel

Faculty Work Comprehensive List

The behavior of critical connections between prefabricated elements in bridges utilizing accelerated bridge construction (ABC) methods continues to be of utmost interest. Some of these connections will experience excessively high demand in regions that are susceptible to high seismic load. This paper presents a large-scale experimental study that investigated seismic performance of the connection between precast concrete I-shaped girders and a concrete inverted-tee cap beam using two different details. The ability of the girder-to-cap connection to successfully resist positive moment and the corresponding shear under combined gravity and seismic effects was of particular interest. The effect of vertical seismic acceleration …

Design Of Gan-Based Low-Loss Y-Branch Power Splitter, Retno Wigajatri Purnamaningsih, Irma Saraswati, Nji Raden Poespawati, Elhadj Dogheche

Makara Journal of Technology

We present a Y-branch power splitter design with a multimode section using GaN on Sapphire at telecommunication wavelength. The GaN sample optical properties were also investigated, resulting in a refractive index for the GaN layers nTE=2.289±0.001 and nTM=2.324±0.00. Optimization of the structure parameters for this structure was conducted accurately using BPM methods. The results demonstrated the possibility of realizing a GaN-based Y-branch power splitter for various applications.

Ultra-Wideband Notched Characteristic Fed By Coplanar Waveguide, Rastanto Hadinegoro, Yuli Kurnia Ningsih, Indra Surjati

Makara Journal of Technology

In this paper, a novel Ultra-Wide Band (UWB) notch patch antenna with co-planar waveguide (CPW) fed is presented. This antenna only used one layer and the patch antenna is constructed on the first layer and back to back with CPW fed and bottom part is ground plane. The width notch is used to achieve the UWB characteristic. The results shown that the impedance bandwidth is 1130 MHz (1.662–2.792 GHz) or about 50.7% for VSWR <2.

Analysis Of Vibration Generated By The Rubbing Of Flat Surfaces, Zahrul Fuadi

Makara Journal of Technology

Among the phenomena that occur as a result of contact between two surfaces is friction sound, in which surface roughness is of great importance. In this study, the parameter of contact stiffness is used to explain the frequency characteristic of vibration generated by the rubbing of flat surfaces under a small load. A 3-disk configuration rubbing method was used, which provides a unique characteristic of the system's frequency response function containing specific information about the rubbing vibrations. It is shown that the peak frequency of the rubbing vibration can be explained by using a two-degrees-of-freedom model incorporating the parameter of …

Endoscopic Application Of A Compact Compound-Eye Camera, Keiichiro Kagawa, Shoji Kawahito

Makara Journal of Technology

A multi-functional compound-eye endoscope enabling multi-spectral imaging and variable field-of-view is presented, which is based on a compact compound-eye camera called TOMBO (thin observation module by bound optics). Narrow-band filters attached to some lenses provide snap-shot multi-band images. Fixed and movable mirrors are introduced to control the field of view, which realizes several observation modes such as three-dimensional shape measurement, wide field-of-view, and close-up observation.

Development Of The Soekarno–Hatta International Airport Rail Link Project Using The Value Engineering Method: Creating Value For Money, Mohammed Ali Berawi, Bambang Susantono, Suyono Dikun, Tommy Ilyas, Herawati Zetha Rahman, Abdur Rohim Boy Berawi, Teuku Yuri Zagloel, Perdana Miraj, Jade Sjafrecia Petroceany

Makara Journal of Technology

Soekarno–Hatta Airport is the main gateway for international flights to Greater Jakarta. Its accessibility depends on the inter-city and Sedyatmo toll roads, which causes congestion in peak hours, leading to uncertainty about travel times. The Soekarno–Hatta International Airport Rail Link (SHIARL) is proposed as an alternative mass transportation project, which is expected to provide accessibility and mobility for people and goods to and from the airport. Previously, the project was unattractive to private investors as it was technically and financially unfeasible. Therefore, this research aims to improve the feasibility of the Soekarno-Hatta International Airport Rail Link (SHIARL) by using a …

The Mechanical And Tribology Properties Of Sputtered Titanium Aluminum Nitride Coating On The Tungsten Carbide Insert Tool In The Dry Turning Of Tool Steel, Esmar Budi, Mohd. Razali Bin Muhamad, Md. Nizam Bin Abdul Rahman

Makara Journal of Technology

The effect of the sputtering parameters on the mechanical tribology properties of Titanium Aluminum Nitride coating on the tungsten cabide insert tool in the dry turning of tool steel has been investigated. The coating was deposited using a Direct Current magnetron sputtering system with various substrate biases (-79 to -221 V) and nitrogen flow rates (30 to 72 sccm). The dry turning test was carried out on a Computer Numeric Code machine using an optimum cutting parameter setting. The results show that the lowest flank wear (~0.4 mm) was achieved using a Titanium Aluminum Nitride-coated tool that was deposited at …

Modified Design Of Pin-On-Ring Tribometer For Hip Joint Prostheses Measurement; Case Study On Salat Activity, Muhammad Khafidh, Jamari Jamari, Sulardjaka Sulardjaka, Mohamad Tauviqirrahman, Emile Van Der Heide

Makara Journal of Technology

Total hip replacement (THR) is one of the most successful orthopedic surgical procedures for replacing a broken hip joint. In THR, wear may occur at the articulating surface of the acetabular cup and the femoral head. In Indonesia, the country with the largest Muslim population in the world, most of the inhabitants do salat (praying) every day. THR users are banned from doing salat for fear it will damage the hip joint prostheses. The previous wear calculation methods on the hip joint prostheses use the gravimetric, coordinate measuring machine (CMM), profiler, and geometric method. The disadvantages of the previous methods …

Continuous Production Of Nanotubes And Carbon Clusters By Use Of The Revolver-Injection-Type Arc Jet Producer, Tetsu Mieno, Naoki Matsumoto, Takahashi Tomie, H. Inoue

Makara Journal of Technology

Efficient and continuous production of fullerenes, single-walled carbon nanotubes (SWNTs), and carbon nano-particles has been developed by the JxB arc jet method, where the Lorentz force of magnetic field jets out gaseous carbon particles to the JxB direction. In order to realize continuous mass production of these carbon clusters, the revolverinjection- type arc jet producer (RIT-AJP) has been developed. Production of fullerenes, endohedral metallo-fullerenes, SWNTs, metal-encapsulated carbon nano particles has been examined.

Lateral Load Resistance Of Laminated Veneer Lumber Sengonwooden Joints With Wooden Dowels, Niken Palaeowati, Ali Awaludin, Suprapto Siswosukarto

Makara Journal of Technology

Analytical models for wooden-doweled joints need to be developed. The objective of this research is to determine whether the strength of wooden-doweled joints can be well predicted by equations developed for steel-doweled joints. In this experiment, various connection parameters, such as dowel diameter, species of the wooden dowel, and angle of joints, are studied. The joint specimens are loaded in a quasi-static state with four replications each. A5% offset diameter method is used to determine the lateral load resistance of the tested joints, while the predictions are evaluated by equations given in Indonesian National Standard (SNI) 7973-2013 and the European …

2014 Fall Engr333 Student Seminar Presentation, John Sherwood, Jonathan Crow, Nicolaas Ourensma, Zak Devries, Andy Frandsen, Jack Kregel, Ryan Rhodes, Connor Vandongen, Schieffer Kwong, Jee Myung Kim, Matthew Deyoung, Jeff Demaagd, Tyler Devries, Doug Faber, Garrick Hershberger, Jake Derooy, Dustin Brouwer, David Evenhouse, Patrick Anderson, Thomas Brown, Ed Smit, Joel Smith, Thane Symens, Kaitlyn Weinstein, Seth Koetje, Nick Memmelaar, Austin Juza, Matt Ramaker, Ryan Demeester, Jordan Newhof, Wes Richards, Josh Vanderbyl

ENGR 333

File for student presentation, given by students in the Fall 2014 class of ENGR333.

Reliability-Based Design And Acceptance Protocol For Driven Piles, Joseph Jabo

Graduate Theses and Dissertations

The current use of the Arkansas Standard Specifications for Highway Construction Manuals (2003, 2014) for driven pile foundations faces various limitations which result in designs of questionable reliability. These specifications are based on the Allowable Stress Design method (ASD), cover a wide range of uncertainties, do not take into account pile and soil types, and were developed for general use. To overcome these challenges it is deemed necessary to develop a new design and acceptance protocol for driven piles. This new protocol incorporates locally calibrated RLFD resistance factors for accounting for local design and construction experiences and practices, as well …

Microbial Community Shifts Caused By Changes In The Primary Oxidant At A Drinking Water Treatment Plant, Connie Marie Moloney

Graduate Theses and Dissertations

Microbial communities resistant to common oxidants can cause concerns for water treatment plants (WTPs). If a bacterium is not fully oxidized during disinfection, these species can impede upon filtration processes or seed biofilms in the distribution system. In an effort to minimize disinfection by-products (DBP's) that result from the reaction of chlorine (Cl2) with natural organic matter, water treatment plants have the option to change their primary oxidant to chlorine dioxide (ClO2). The following study examines the change in microbial communities during the sedimentation process under differing oxidation regimes, specifically chlorine (Cl2) and ClO2 at the local water treatment plant …