Space Vehicles Commons^™

Volume Averaged Modeling Of The Oxidation Of Porous Carbon Fiber Material, Alexandre Martin

Mechanical Engineering Faculty Publications

Charring ablators remain the premium choice for space exploration missions that involve atmospheric re-entry. This type of ablative material is composed of a carbon matrix, usually made of fibers, which is then impregnated with a resin. During re-entry, the high heat flux produced by convective heating causes the material to chemically react. First, the resin pyrolyzes, and is vaporized into a gas that travels through the material, and is eventually ejected at the surface. Then, as the temperature rises, the surface of the porous matrix recess through ablative processes. For re-entry conditions typical of space exploration missions, this is mainly …

Assessment For Completion Of Cp7 Integration With Revision 6 Avionics, Daniel Jennings

Electrical Engineering

he purpose of this project is the continuation of the CP7 CubeSat project, analysis for integration with new Avionics Systems, and to leave behind instruction for future work for completion of the satellite. CP7 is a satellite in development to support a mechanical and electrical system to experiment on particle damping in micro-gravity. The completion of this satellite needs to be prioritized more than it has been by the PolySat team to honor our work with Northrop Grumman, who have been supportive and helpful throughout the process. This work seeks to aid in the completion of this satellite, so that …

A Generic Decision Making Framework For Autonomous Systems, Connor Lange

Master's Theses

With the rising popularity of small satellites, such as CubeSats, many smaller institutions previously incapable of developing and deploying a spacecraft have starting to do so. Institutions with a history of space flight, such as NASA JPL, have begun to put projects on CubeSats that would normally fly on much larger satellites. As a result, the institutions with space flight heritage have begun to port spacecraft software that was previously designed for much larger and more complex satellites to the CubeSat platform. Unfortunately for universities, who are the majority of all institutions devel- oping CubeSats, these ported systems are too …

Feasibility Of Microsatellite Active Debris Removal Systems, Karsten J. James

Master's Theses

Space debris has become an increasingly hazardous obstacle to continued spaceflight operations. In an effort to mitigate this problem an investigation of the feasibility of a microsatellite active debris removal system was conducted. Through proposing a novel concept of operation, utilizing a grapple-and-tug system architecture, and by analyzing each resultant mission phase in the frame of a representative example, it was found that microsatellite scale systems are capable of fulfilling the active debris removal mission. Analysis of rendezvous, docking, control and deorbit mission requirements determined that the design of a grapple-and-tug system will be driven by sizing of the propellant …

Rocket Fuel Pressurization, Sean Green, Joe Marcinkowski, Andrew Nahab

Mechanical Engineering

No abstract provided.

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

Characterization Of The Effects Of A Sun-Synchronous Orbit Slot Architecture On The Earth's Orbital Debris Environment, Connor David Noyes

Master's Theses

Low Earth orbit represents a valuable limited natural resource. Of particular interest are sun-synchronous orbits; it is estimated that approximately 44% of low Earth satellites are sun-synchronous. A previously developed sun-synchronous orbit slot architecture is considered. An in-depth analysis of the relative motion between satellites and their corresponding slots is performed. The long-term evolution of Earth's orbital environment is modeled by a set of coupled ordinary differential equations. A metric for quantifying the benefit, if any, of implementing a sun-synchronous architecture is developed. The results indicate that the proposed slot architecture would reduce the frequency of collisions between satellites in …

Smaller Spacecraft For Education And Space Research, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Smaller spacecraft for education and space research" from May 14, 2013.

Investigation Of A Lagrangian-Point Propellant Depot Rendezvous Approach For An Interplanetary Mission To Mars, Joshua W. Ehrlich

Doctoral Dissertations and Master's Theses

This thesis investigates the feasibility of a refueling station for a beyond Earth orbit (BEO) mission. The propellant depot is located at the L₂ -Lagrangian point within the Earth-Moon system. This investigation determines if a refueling mission will reduce propulsive energy requirements necessary for Earth departure of a BEO-vehicle to achieve an interplanetary transfer to Mars. Furthermore, this research presents a trade study which identifies approximate total requirements for a direct and rendezvous mission to Mars as well as the necessary fuel masses to complete each approach. This analysis provides conclusive information in determining the benefits in utilizing a …

Orbital Debris Removal Technologies: A Hybrid Electrodynamic Tether And Ion Beam Shepherd Satellite Design For Fuel Efficient Contactless Debris Removal, JöRn Mumme

Doctoral Dissertations and Master's Theses

Space debris poses a serious threat to humanities efforts at space exploration as well as the expanding uses for earth-orbiting satellites. This thesis investigates the proposed technologies for the debris's removal both large and small. Focus is applied to the large debris removal technologies since the small size category is dominated by the ORION laser system. Furthermore, the large debris objects pose the most destructive threat upon impact to satellites. Electrodynamic tethers (EDT) as well as their control strategies, ion-beam shepherds (IBS), and tradition thruster methods are investigated for effectiveness and feasibility. Hybrid combinations of these technologies are investigated in …

Comm-Components Of Link Equation, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Comm-Components of Link Equation" from April 10, 2013.

Pilots For Space Tourism, Robert A. Goehlich, Jay K. Anderson, Nathan N. Harrold, Joseph A. Bemis, Mike T. Nettleingham, Joshua M. Cobin, Bradley R. Zimmerman, Ben L. Avni, Michael D. Gonyea, Nicholas Y. Ilchena

Applied Aerospace Science

This article sheds light on the key player needed for any space tourism adventure: the pilot who flies the spacecraft. The paper addresses the potential benefits of including a pilot at the controls when designing a space tourism spacecraft. It examines the basic qualifications and advanced skills required of space tourism pilots and discusses key training requirements for selected pilots and space pilots’ pay and benefits. In addition, the research concludes that, just as the pioneers of passenger transport in aviation entertained and captured the interest of their passengers, the space pilot should have the skills of a tour guide.

Syllabus For Space Systems Engineering 120: Satellites And Space Systems I (Spring 2013), Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

Professor Bob Twiggs' 2013 spring syllabus for Space Systems Engineering 120: Satellites and Space Systems I.

.

Communications: Moving Data, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Communications: Moving Data" from March 24, 2013.

Comm-Using Decibels, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Comm-Using Decibels" from March 14, 2014.

Ad-Hoc Regional Coverage Constellations Of Cubesats Using Secondary Launches, Guy G. Zohar

Master's Theses

As development of CubeSat based architectures increase, methods of deploying constellations of CubeSats are required to increase functionality of future systems. Given their low cost and quickly increasing launch opportunities, large numbers of CubeSats can easily be developed and deployed in orbit. However, as secondary payloads, CubeSats are severely limited in their options for deployment into appropriate constellation geometries.

This thesis examines the current methods for deploying cubes and proposes new and efficient geometries using secondary launch opportunities. Due to the current deployment hardware architecture, only the use of different launch opportunities, deployment direction, and deployment timing for individual cubes …

Work Ethics For Sse-122: Satellites & Space Systems (Spring 2013), Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

PowerPoint presentation by Professor Bob Twiggs on work ethics for SSE-122: Satellites & Space Systems for the spring 2013 semester, created on February 28, 2013.

Vtt Technical Research Centre Of Finland, Vtt Technical Research Centre

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation titled "VTT Technical Research Centre of Finland" from February 14, 2013.

Smaller Spacecraft For Flying Large Clusters Of Biological Space Experiments, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Smaller spacecraft for flying large clusters of biological space experiments" from February 5, 2013.

Would I Survive In Space?, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Would I survive in Space?" from February 4, 2013.