Space Vehicles Commons^™

A Decision Analysis Framework To Consider Space Congestion In Orbit Selection, Anthony J. Correale

Theses and Dissertations

Low Earth Orbit (LEO) is becoming more congested, which increases the risk to space missions. Decision makers will need to consider this increase in congestion as an increased risk within their mission engineering process. This thesis proposes a methodology to create and implement a value structure that quantitatively scores a range of orbits based on congestion factors of each orbit and how well each orbit meets mission requirements. This thesis demonstrates this methodology on a set of circular LEO orbits defined by altitude and inclination, and scores this illustrative scenario based on notional mission measures and expected number of encounters …

A Proposed Mission Assurance Framework For University Cubesat Programs, Mitchell R. Thomas

Theses and Dissertations

The low cost, small form factor, and use of Commercial-Off-The-Shelf components make CubeSats an ideal platform for university use given their unique constraints. Since 2000, roughly 55% of CubeSats developed by universities fail to meet mission goals. Mission assurance, which is used to increase confidence in mission success, is based around traditional government programs, and does not provide an adequate road map for universities. Leaving them without specific guidance in tailoring mission assurance activities to operate within their constraints. This paper adapts these traditional practices to develop a baseline mission assurance framework for university CubeSat programs.

Utilization Of Characteristic Modal Analysis For Antenna Design Needed For An Afit Satellite, Scott C. Podlogar

Theses and Dissertations

Antenna design is a pervasive, growing field for electrical engineers. As the number of new materials and techniques increase so too does the demand and requirements pushing forth new innovative ideas. Among these ideas is a leading edge analytic technique called Characteristic Modal Analysis (CMA) originally credited to Garbacz and Turpin. CMA works to break down the current distribution along a structure in a way that can offer great insights into how that structure operates as an antenna. This technique has great merits in post design analytics but it is rarely seen to be integrated into the design process. This …

The Chime Fast Radio Burst Population Does Not Track The Star Formation History Of The Universe, Rachel C. Zhang, Bing Zhang

Physics & Astronomy Faculty Research

The redshift distribution of fast radio bursts (FRBs) is not well constrained. The association of the Galactic FRB 200428 with the young magnetar SGR 1935+2154 raises the working hypothesis that FRB sources track the star formation history of the universe. The discovery of FRB 20200120E in association with a globular cluster in the nearby galaxy M81, however, casts doubts on such an assumption. We apply the Monte Carlo method developed in a previous work to test different FRB redshift distribution models against the recently released first CHIME FRB catalog in terms of their distributions in specific fluence, external dispersion measure …

Social Representations Of Space Travel, Asli D. A. Tasci, Alan Fyall, Xiaoxiao Fu

Rosen Research Review

Space tourism regularly receives media coverage, but so far, there has been little research around public opinions towards space travel. Dr. Asli D.A. Tasci, Dr. Alan Fyall and Dr. Xiaoxiao Fu from UCF Rosen College of Hospitality Management used the Social Representations Theory to investigate public attitudes to space travel and uncover how and why these attitudes are formed. They discovered that commercial space organizations have a strong influence on public opinion, which can be further enhanced if they incorporate more scientific knowledge and evidence.

Modeling And Experimentation Of Buckling Of Composite Deployable Booms Under Bending, Christopher D. Rehberg

Electronic Theses and Dissertations, 2020-2023

This thesis presents experimental and finite element analysis results of eccentrically loaded carbon-fiber composite booms that can deploy solar sails. Using the collapsible tubular mast design along with the geometry from the upcoming Advance Composite Solar Sail System mission, short composite booms segments were manufactured for testing. New clamps were also designed to allow a column bending test to achieve eccentric loading. As buckling through eccentric loading has not previously seen much research, the geometry and composite layups were simplified to allow for ease of manufacturing and verification. The work presented here shows that a finite element simulation, using a …

Investigating Ground Interactions Of A Rotocraft Landing Vehicle On Titan, Adam Rozman

Honors Undergraduate Theses

The exploration of celestial bodies has recently advanced from rovers to rotorcraft. This includes the recent flights of Mars Ingenuity and the upcoming Dragonfly mission to explore the terrain of Saturn’s moon Titan as part of NASA’s New Frontiers Program. Flight-based landers can travel quickly to sites kilometers apart and land in complex terrain. Although cruise conditions for these rotorcrafts are well understood, studies are necessary to understand take-off and landing. In ground effect conditions, a rotor wake impinges and reflects off the ground, creating changes in aerodynamics such as increased lift. Additionally, operating over loose surfaces, the rotors can …

Studying The Electrostatic Effects On The Dynamics Of Charged Lunar Dust Via Discrete Element Method, Hao Wang

Electronic Theses and Dissertations, 2020-2023

Dust problems raise significant concerns in planetary surface exploration. The unusual behavior of the dust particles that surround the vehicle after engine cutoff has the potential to have more of an influence on surface systems than the high velocity lunar rocket plume ejecta in the landing process. A prevailing hypothesis attributes the levitation and transport of dust particles on the surface of airless bodies to the electrostatic effects and electric field. However, there is no accurate model considering the inter-particle electrostatic interactions, especially when the particles are charged by plume. This dissertation aims to understand the behavior of charged lunar …

A Decoupled Engineering Methodology For Accurate Prediction Of Ablative Surface Boundary Conditions In Thermal Protection Systems, Justin Cooper

Theses and Dissertations--Mechanical and Aerospace Engineering

The main objective of the present work is to demonstrate a method for prediction of aerothermal environments in the engineering design of hypersonic vehicles as an alternative to the current heritage method. Flat plate and stagnation point boundary layer theory require multiple assumptions to establish the current engineering paradigm. Chief among these assumptions is the similarity between mass and heat transfer. Origins of these assumptions are demonstrated and their relationship to conservative engineering design is analyzed, as well as conditions where they possibly break down. An alternative approach for assessing aerothermal environments from the fluid domain is presented, which permits …

Kentucky Re-Entry Universal Payload System (Krups): Hypersonic Re-Entry Flight, John Daniel Schmidt

Theses and Dissertations--Mechanical and Aerospace Engineering

The Kentucky Re-entry Universal Payload System (KRUPS) is a small capsule designed as a technology testbed for re-entry experiments. For its first incarnation, KRUPS has been designed to test Thermal Protection Systems (TPS) and instruments in re-entry flights. Because of the unique environment a vehicle undergoes during re-entry, there is a high-demand for experimental data from re-entry experiments. KRUPS has been developed at the University of Kentucky (UK) over the past seven years to meet this demand. After completing sub-orbital campaigns, the first KRUPS hypersonic re-entry mission was attempted. The mission involved building three 11-inch diameter capsules each outfitted with …

Co2 Based Parachute Deployment, Anthony M. S. Settlemier, Nicholas Motter

Williams Honors College, Honors Research Projects

This paper describes the design process of a CO2 based parachute deployment system for the Akronauts Rocket Design team, with particular emphasis on the selection of methodologies of deployment as well as design iteration. The objective was to create a fully mechanical system in order to replace the black powder based systems that were used previously by the team.

Emphasis was put in creating a system that would function well at higher altitudes while also preventing damage to the parachute during deployment. This system emphasizes robustness under launch conditions.

Cfd And Heat Transfer Analysis Of Rocket Cooling Techniques On An Aerospike Nozzle, Geoffrey Sullivan

College of Graduate Studies: Theses & Dissertations

In recent years the development of rocket engines has been mainly focused on improving the engine cycle and creating new fuels. Rocket nozzle design has not been changed since the late 1960s. Recent needs for reliable and reusable rockets, as well as advancements in additive manufacturing, have brought new interest into the aerospike nozzle concept. This nozzle is a type of altitude adjusting nozzle that is up to 90% more efficient than bell nozzles at low altitudes and spends up to 30% less fuel. Since the nozzle body is submerged in the hot exhaust gasses it is difficult to keep …

Space Cargo: Ultra-Fast Delivery On Earth –Potential Of Using Suborbital Space Vehicles For The Transportation Of Cargo, Robert O. Walton, Robert A. Goehlich

International Journal of Aviation, Aeronautics, and Aerospace

No abstract provided.

State-Of-The-Art Of Thermal Control Solutions To Establish A Modular, Multi-Orbit Capable Spacecraft Thermal Management System Design Methodology, Robert C. Consolo Jr

Doctoral Dissertations and Master's Theses

Today, the exploration and exploitation of space continues to become a more common occurrence. All types of spacecraft (S/C) utilize various types of thermal management solutions to mitigate the effects of thermal loading from the unforgiving vacuum of space. Without an appropriately designed thermal system, components on-board the S/C can experience failure or malfunction due to fluctuations in temperatures either beyond the designed operational parameters or unstable oscillating temperatures. The purpose of this study is to perform a comprehensive review of technologies available today that are being used for thermal management onboard S/C in addition to investigating the means to …

Lupa: An Excursion Vehicle For The Moons Of Mars, Shannon Kavanagh, Bo Lewis, Alex Odinamba, Joshua Mulhern

Senior Design Project For Engineers

Our team has designed a spacecraft and mission for exploring the moons of Mars. The Lithological and Ultraviolet Photometry Assessment (LUPA) excursion vehicle is capable of crew habitation, autonomous rendezvous, and in-vacuum sample collection all in support of a parallel Mars surface mission to be carried out in the year 2040. Our project's key focus areas revolve around orbital mechanics, space vehicle propulsion analysis, scientific exploration, and the management of various interconnected spacecraft subsystems.

Project Scrappie (Clear Constellation), Jacob Bertram, Jacob Britt, Bill Ngo, Mike Diesing

Senior Design Project For Engineers

Clear Constellation™ is a nationwide competition hosted by Rubicon® to combat the growing problem of space debris in Low Earth Orbit. Project Scrappie is our team’s solution to this problem. Scrappie is an autonomous apparatus will make use of Whipple shield technology to collide with debris at high velocities and effectively destroy the debris throughout selected orbital paths.

Preliminary Development Of The Dialysis-Membrane-Based Passive Biocide Delivery System For Spacecraft Water Recovery Units, Rogelio Elias Garcia Fernandez

Graduate Theses and Dissertations

The purpose of this investigation is to explore the capabilities of a dialysis-membrane-based system for the in-line dosing of silver ions to treated water in spacecraft water recovery units. The spacecraft environmental control and life support system community (ECLSS) are interested in adopting silver ions as a biocide in future spacecraft water recovery processes since silver ions are effective biocide at concentrations that humans can safely consume. The system has been designed following the configuration of the Water Processor Assembly (WPA) aboard the International Space Station. In this configuration, silver ions have to be added at the last step in …

Optimal Sizing And Control Of Hybrid Rocket Vehicles, Srija Ryakam

Doctoral Dissertations and Master's Theses

In the present work, a genetic algorithm is used to optimize a hybrid rocket engine in order to minimize the propellant required for a specific mission. In a hybrid rocket engine, the mass flow rate of the oxidizer can be throttled to enhance the performance of the rocket. First, an analysis of the internal ballistics and the ascent trajectory has been carried out for different mass flow rates of the oxidizer as a function of time, for a fixed amount of oxidizer, in order to study the effect of throttling. Two equivalent problems are considered: in the first problem the …

Issue 18: Contributors, Don Flournoy

Online Journal of Space Communication

List of Issue 18 Contributors

Sunsat Design Competition 2015-2016 First Place Winner – Team Space Transport: Power Satellites Beamed Energy Bootstrapping, Keith Henson, Anna Nesterova

Online Journal of Space Communication

This International SunSat Design Competition first-place winner for 2016 describes a beamed energy transport system that will operate in Space above low earth orbit (LEO) as a way to move power satellite parts into high orbits.

This design, entitled “Beamed Energy Bootstrapping,” makes use of small propulsion power satellites to provide the energy for space-based vehicles using electric arcjets. The proposal lays out a scheme to get the first propulsion power satellite in place without damage as it passes through the orbiting space junk below 2000 km.

Click here to see the video: Space Transport for Power Satellites Beamed Energy …