Aerospace Engineering Commons^™

Design, Fabrication, And Testing Of An Electromagnetic Rail Gun For The Repeated Testing And Simulation Of Orbital Debris Impacts, Jeff Maniglia, Jordan Smiroldo, Alex Westfall, Guy Zohar

Aerospace Engineering

An Electromagnetic Railgun (EMRG) was designed, built, and tested, capable of firing a projectile a 1 gram projectile at 650 m/s muzzle velocity. The EMRG utilizes an injector, a high voltage power supply, a capacitor bank, inductors and rails. The injector fires 2300 psig Nitrogen gas into the system to provide an initial velocity. The high voltage power supply charges the capacitor bank. The capacitor bank discharges the electric potential built up through the projectile while inside the rails in order to create the EMRG’s force. The inductors are used to pulse form the capacitor bank in order to get …

An Analysis Of Stabilizing 3u Cubesats Using Gravity Gradient Techniques And A Low Power Reaction Wheel, Erich Bender

Aerospace Engineering

The purpose of this paper is to determine the feasibility of gravity gradient stabilizing a 3U CubeSat and then using a miniature reaction wheel to further increase stability characteristics. This paper also serves as a guide to understanding and utilizing quaternions in attitude control analysis. The analytical results show that using 33 centimeter booms and 400 gram tip masses, a 3U CubeSat will experience a maximum of 6 degrees of angular displacement in yaw and pitch, and less than .5 degrees of angular displacement in the nadir axis. A .120 kilogram miniature reaction wheel developed by Sinclair Interplanetary was introduced …

Study Of The Effect Of Different Lay-Up Methods On The Composite Mechanical Characteristics, Veronica Cuevas, Walter Ely Salguero

Aerospace Engineering

The purpose of this experiment is to investigate and understand composite structures and the effect of different layup methods on the composite structure, particularly a composite I-beam. One must learn the procedure on how to build the composite I-beam and put it together then build the final composite I-beam and enter the I-beam in the 14^th Annual Society for the Advancement of Material and Process Engineering (SAMPE) Student Bridge Contest. The competition will be held May 25^th, 2011 in Long Beach, CA. The I-beam was entered in the competition and placed 4^th out of 5. The …

Electric Aircraft Propulsion Test Rig Design & Fabrication, Ryan Mayer, Brian Kubicki, Bradley Rodriguez, Austin Harris, David Caudle

Aerospace Engineering

An electric aircraft propulsion test rig was designed and fabricated to predict thrust, torque and battery discharge profiles for an electric aircraft. The original unit was purchased from ElectraFlyer and included the DC brushless motor, carbon fiber propeller, charger, electronic controller and lithium polymer batteries. Various components were constructed and purchased in order to fabricate the optimal test rig apparatus. This apparatus allows for simultaneous measurement of the torque and thrust of the system through the use of a biaxial sensor. The test rig also measures system voltage and current, which allows the user to determine the discharge profile of …

An Investigation Of Dynamic Soaring And Its Applications To The Albatross And Rc Sailplanes, Christopher J. Lee

Aerospace Engineering

Dynamic soaring is a technique used by the sea bird the Albatross. This technique allows for the bird to stay in the air for extended periods of time with very little effort. Dynamic soaring utilizes the wind gradient on the surface of the ocean to maintain its airspeed. A similar technique is used by RC glider pilots to achieve high speeds by using the shear wind layer on the leeward side of mountain ridges.

Analysis And Design Of An Affordable High Altitude Rocket System, Brian Cooper

Aerospace Engineering

This paper discusses the design of the Rarefied High-Altitude Zenith Experimental Rocket (RHAZER) which is launched at an altitude of 35 kilometers from a weather balloon. The weather balloon is capable of carrying up to 2 kilograms of payload to this altitude, and the rocket can carry a payload of approximately 150 grams to an altitude of at least 80 kilometers and be recovered safely after landing. It is designed to be aerodynamically stable at its launch point, while using fins to spin-stabilize before it enters the low-pressure upper atmosphere. This system has been designed to be used as an …

An Analysis Of N-Body Trajectory Propagation, Emerson Frees Ii

Aerospace Engineering

Trajectories created with n-body orbit models were propagated in geocentric and interplanetary test cases. The n-body models were created in MATLAB^® using numerical integration. In the geocentric test case, the n-body codes were compared to a two-body orbit model and to the default HPOP model used in Satellite Tool Kit^®. The interplanetary test case compared the n-body model to the HORIZONS ephemeris data from JPL and an equation for ephemeris propagation. Both cases used the same initial positions and velocities and were propagated for the same duration. The results of the analysis showed that while n-body models …

Development And Design Of A Hovering Controller For Operation In A Dynamic Asteroid Environment, Nicholas Georgiades

Aerospace Engineering

The project seeks to develop a dynamic model similar to that present near a solar system small body, and to design a controller suggested in other resources that will allow a spacecraft operating in this environment to hover in a fixed location in the relative reference frame of the small body. The paper discusses the derivation of the equations of motion used in the non-linear dynamic model, the design of the controller that will allow the spacecraft to hover, and the development of the control loop that will simulate the spacecraft hovering in the dynamic environment of the asteroid 1999 …

Flexi-Focus Lens: Pdms Variable Focal Length Lens, Patrick Angulo, Alex Doyle, Dylan Mcdaniel, Michael Olivarez

Industrial and Manufacturing Engineering

The design of a variable focal length, or flexi-focus, polydimethylsiloxane (PDMS) lens incorporating a light emitting diode (LED) source is intended for future use on board commercial aircraft. Specifically, the design is intended for the Boeing 787 Dreamliner aircraft, serving as a personal reading light for the passengers seated in the cabin. Most current reading lights on board aircraft are rigid, incandescent, and have very limited freedom in terms of adjusting the emitted light. Incandescent lamps are also inefficient with respect to energy consumption and light output as well as a high heat output. In an economy of increasing demand …

Human Powered Helicopter: Observing The Impacts Of Ground Effect And Intermeshed Rotors, Shane Stowe

Physics

No abstract provided.

Adaptive Component Usage For The Thermal Management Of Picosatellites, William D. Whalen

Master's Theses

The CubeSat standard originated in 1999.  It was a joint development led by Dr. Jordi Puig-Suari of California State Polytechnic University San Luis Obispo and Professor Robert Twiggs of Stanford University. The engineering challenges that have come from this picosatellite class have created incredible educational opportunities for engineering students throughout the world.  Since the challenges of engineering a CubeSat abound the designers are always looking at novel and even revolutionary solutions to each one.  One of those opportunities is in thermal subsystem design, implementation and characterization.  A potential solution for CubeSats is adaptive component usage.

This thesis is the written …

A Space Based Particle Damper Demonstrator, John Brown

Master's Theses

The structure and payload of a CubeSat flight experiment that investigates the performance of particle dampers in a micro-gravity environment was designed, built, and tested, and will provide on orbit data for model validation and improved performance predictions for space applications of particle damping.

A 3-D solid model of the integrated CubeSat structure and payload was created satisfying all constraints from CubeSat and the System Dynamics Department at Northrop Grumman Aerospace Systems. The model was verified using commercially available Finite Element Analysis software (FEA), and a prototype structure part was fabricated. The prototype was tested and verified the FEA. A …

The Effects Of A Damage Arrestment Device On The Mechanical Behavior Of Sandwich Composite Beams Under Four-Point Bending, Richard Anthony Davis

Master's Theses

The demand for an insert on composite sandwich structures to aid in the arrestment of face-core delamination is of great need.  This research studies the use of a damage arrestment device (DAD) that connects the carbon fiber face sheets to the foam core to find whether an increase in the structural integrity of the sandwich beam results.  Experimental analysis was employed to test the samples and was verified by a theoretical and finite element approach.

The mechanical properties of LTM45/CF1803 pre-impregnated carbon fiber and Last-A-foam FR 6710 polyvinylchloride foam were experimentally analyzed using ASTM D3039 and ASTM D1621 standards respectively …

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms.  However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space.  Robust particle damping technology offers a potential solution, driving the need for microgravity characterization.   A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources.  This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

Design Optimization Of Gaas Betavoltaic Batteries, Haiyanag Chen, Lan Jiang, Xuyuan Chen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

GaAs junctions are designed and fabricated for beta voltaic batteries. the design is optimized according to the characteristics of GaAs interface states and the diffusion length in the depletion region of GaAs carriers. under an illumination of 10 mCi cm-263Ni, the open circuit voltage of the optimized batteries is about ∼0.3 V. It is found that the GaAs interface states induce depletion layers on P-type GaAs surfaces. the depletion layer along the P+PN+ junction edge isolates the perimeter surface from the bulk junction, which tends to significantly reduce the battery dark current and leads to a high open circuit voltage. …

Cal Poly Human Powered Helicopter, Josiah Auer, Eric Behne, Dave Berry, Rebecca Hennings, James Koch, Ian Marquardt, Josiah Mayfield, Sean Miller

Mechanical Engineering

The following report encompasses the Cal Poly Human Powered Helicopter team’s efforts during the 2010-2011 academic year. The intention of this project is to further the knowledge of human powered helicopter design and to validate an ideal configuration through experimental tests and analysis. 

A. Background

The Sikorsky Prize offered by the American Helicopter Society has been the catalyst for many attempts at Human Powered Helicopter (HPH) flight. The requirement to win the prize is a continuous, human powered flight of more than 60 seconds that stays within a 10 meter square box and reaches an altitude greater than 3 meters …

Rayleigh Test Apparatus Design Report, Josef Duller, Owen Raybould, James Nicovich

Mechanical Engineering

The Rayleigh Test Apparatus is a device that will be used to test the thermodynamic properties of Nitrous Oxide to assess the feasibility of using this fluid as a coolant for a hybrid rocket aero spike. The aero spike is intended to redirect the propulsion flow as it leaves the engine to create a more efficient flow pattern at low and high altitudes. However, there are issues of overheating which leads to melting of the aero spike. For this reason, the use of nitrous oxide (N2O) as a coolant is being explored. N20 is being considered because it is already …

Boom Stability Control Final Project Report, Michael Barnes, Justin Carnahan, Daniel Fluitt, Alicia Johnstone

Mechanical Engineering

The BOOMStiC Gravity Gradient Boom and Turnstile Antenna project was developed to provide a passive attitude control system and better communications for future CubeSat satellites developed by California Polytechnic State University. The system utilizes the energy from a coilable metal spring to deploy a tip mass to a length of one meter from the side of the satellite. Calculations show the resulting gravity gradient torque causes to the satellite to settle two degrees from normal to the earth’s surface.

Hybrid Rocket Based Combined Cycle Test Rig Design, Construction, And Testing, Mark Costa, Matthew Handfelt

Aerospace Engineering

No abstract provided.

Construction Of Naca 66-415 Nlf Composite Wing For Acoustic Turbulence Testing, Scott Sawyer, Sean Stewart

Aerospace Engineering

A design is developed for a Natural Laminar Flow (NLF) wing, to be used at California Polytechnic State University for acoustic turbulence testing. Composite materials are used to produce high-quality surface finishes necessary for laminar flow. A design for the test apparatus is presented and justified. A manufacturing procedure is proposed for the carbon fiber skin, using Vacuum Resin Infusion (VRI). This procedure is tested on a scaled part with satisfactory results; lessons learned are discovered and integrated into the final manufacturing process. The test section has been fit to the Cal Poly wind tunnel, but full implementation has not …