Aerospace Engineering Commons^™

Long Short-Term Memory (Lstm) -Based Neural Network Model For Optimizing Composite Manufacturing Process Using Autoclave, Sourav Bolar, Steven Corns, Nayan Pundhir, Kumbla Chandrashekhara

Engineering Management and Systems Engineering Faculty Research & Creative Works

Producing high-quality fiber-reinforced composites requires precise temperature control during autoclave curing, as even small variations can lead to defects that compromise strength and reliability. At the same time, manufacturers aim to reduce energy use and shorten curing cycles without sacrificing material performance. To address these challenges, this study develops a data-driven Long Short-Term Memory (LSTM) neural network model capable of forecasting temperature evolution inside the autoclave throughout the curing cycle. The model is trained on time-series temperature data collected from multiple sensing locations, enabling it to learn the spatial and temporal trends that govern heat flow during curing. Data augmentation …

Autonomous Uav Mission Planning Under Threat Using Model Predictive Control With Proportional-Navigation Pursuers, Mehmet B. Ozcelik

Mechanical and Aerospace Engineering Theses

Autonomous unmanned aerial vehicles (UAVs) operating in contested environments must

complete mission objectives while avoiding restricted regions, radar exposure, and pos-

sible interception. This thesis develops a MATLAB-based simulation framework for

two-dimensional UAV mission planning under threat using model predictive control and

proportional-navigation chasers. The mission requires the UAV to travel from a start

location to a goal while visiting required checkpoints and avoiding no-fly zones and radar

regions. A chaser attempts to intercept the UAV using either a basic pure-pursuit-style

law or a proportional-navigation guidance law.

The framework integrates environment generation, augmented visibility-graph rout-

ing, waypoint management, UAV kinematic …

Llm-Driven Closed-Loop Uav Control With Obstacle-Aware Model Predictive Control, Halimcan Yasar

Mechanical and Aerospace Engineering Theses

This thesis presents a closed-loop control architecture for uncrewed aerial vehicles (UAVs) in which a large language model (LLM) serves as a high-level decision module operating over a persistent, metric 3D world model.

Rather than generating low-level commands or open-loop plans, the LLM selects one parameterized maneuver per decision step from a small, verified library of flight primitives conditioned on a structured representation of the drone state, tracked object positions, and mission specification.

Translational motion is executed by a planar model predictive controller (MPC) with soft obstacle avoidance, using obstacle hypotheses provided by the LLM, so that safety-critical constraint handling …

Design And Analysis Of Energy Recovery Methods For Reduced Aircraft Emissions, Joshua C. Hauck

Honors Theses

Aircraft flights are an increasingly popular mode of transportation. However, their harmful impacts on the environment are a growing concern. Many engineers have worked to develop fully electric aircraft to address this issue. Although they are much more sustainable than conventional aircraft, electric aircraft encounter severe limitations imposed by current battery technology. One alternative route engineers have taken is developing energy recovery methods (ERMs). These are marketed as devices that reduce aircraft fuel consumption without significantly changing their structure and functionality, making them an excellent short-term solution. However, there is little to no consideration of the tradeoffs induced by the …

Buckling Analysis Of Auxetic Composite Laminates And Optimal Design Using Lamination Parameters And Machine Learning, Hans Bendon Maria Tamil Selvan

Mechanical and Aerospace Engineering Theses

Composite materials are widely used as structural panels in aerospace, automotive, and civil engineering applications, where buckling is often a critical failure mode. This thesis focuses on the analysis and design of composite laminates that maximize buckling performance under prescribed stiffness and thickness constraints.

The first part of the study investigates the buckling behavior of auxetic laminates, which exhibit a negative Poisson's ratio. While previous studies suggest that auxetic laminates can achieve higher critical buckling loads than non-auxetic laminates under simply supported boundary conditions with lateral restraint, the influence of other boundary conditions and plate aspect ratios has not been …

System-Level Assessment Of Non-Ideal Phase Change Material Behavior In Low Earth Orbit Spacecraft Thermal Control Models, Nathan S. Bruursema

Dissertations, Master's Theses and Master's Reports

Phase change materials (PCMs) are of interest in spacecraft thermal control because their latent heat capacity can provide passive thermal buffering during transient or cyclic heat loads. PCM behavior is often treated using idealized assumptions such as repeatable phase transition temperatures, consistent thermal accessibility across cycles, and full latent recovery. However, practical PCM behavior may be affected by non-ideal phenomena such as supercooling, interfacial resistance, and degradation of internal transport accessibility. This thesis examines the system-level relevance of these effects for low Earth orbit (LEO) spacecraft thermal control and identifies the operating conditions under which non-ideal PCM behavior becomes design-relevant. …

Cell-To-Pack Modeling Of Lithium-Ion Batteries: From Bayesian Parameterization To Pack-Level Optimization, Derek Slack

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the major hurdles for electric or hybrid aviation is the comparative energy density between lithium-ion batteries and jet fuel. To help obtain maximal power-to-weight ratio in electric or hybrid powertrains the battery pack design should be optimized to be as light as possible while meeting thermal safety and power requirements. The proposed solution is an optimization routine beginning with a cell-level parameter estimation of lithium-ion battery cells, where data driven Bayesian Gaussian Processes replace empirically or analytically derived parameters in a first principles electrochemical model in PyBaMM, as functions of the transient state of the cell. The resulting …

Made On Mars: Design And Manufacturing Of Structural Polymer-Regolith Composites, Pailey M. Vitale

Williams Honors College, Honors Research Projects

Human exploration of Mars is constrained by harsh environmental conditions and the prohibitive cost of transporting materials from Earth. Long-term sustainability requires the local production of mechanical and structural components using resources available on Mars, thereby minimizing payload mass. This project investigates polymer–regolith composites derived from atmospheric CO₂ and mineral-rich regolith as a pathway toward in-situ manufacturing. These composites, when compatible with additive manufacturing, could replace imported plastics, enable on-demand fabrication, and support closed-loop recycling systems. The objective is to design and evaluate polymer–regolith composites that maintain mechanical integrity and environmental resistance under Martian conditions, including extreme temperature swings, radiation …

Active Altitude Control For High Powered Rockets, Henry Allen, Jason Secora, Charles Williams, Donavon Sanchez, Caleb Nedoma

Williams Honors College, Honors Research Projects

The International Rocket Engineering Competition (IREC) is the premier collegiate high power rocketry competition in the world hosted by the Experimental Sounding Rocket Association (ESRA). The Akronauts Rocket Design team has been competing in IREC since 2015 and have won several awards. The main goal of IREC is to launch a rocket to a specified altitude of 10k, 30k, or 45k ft while carrying a payload and successfully recover with little to no damage.

The control of a typical high-powered rocket is purely passive; the center of pressure of the rocket must be behind the center of gravity with respect …

Design New Stage For Vacuum Pin On Disk, Miranda Boyd

Williams Honors College, Honors Research Projects

For my senior design project, I am redesigning the moving stage for the vacuum pin-on-disk test used in the Akron Engineering Tribology Lab. This system is used to evaluate bearings and lubricants for aerospace applications under controlled vacuum conditions. The current stage design limits flexibility when adjusting for different testing parameters, so my goal is to develop a new movable stage that allows for varying weights and loads to be applied accurately and safely. The redesigned stage will improve test efficiency, adaptability, and precision, ensuring the system can accommodate a wider range of experimental conditions and materials while maintaining compatibility …

Lunar Regolith Densometer, Liam Lee, Vincent Innocenzi

Williams Honors College, Honors Research Projects

Testing of extraterrestrial rovers is a growing concern as lunar exploration as an industry is becoming increasingly commercialized. Currently, the way rover testing is conducted is on a soil regolith which is already available. The structure of the soil, however, is harmful to humans and requires a full bunny suit and respirator to be worn during the conduction of the experiment. This limitation, along with the expensive price tag, prevents college university students and companies from establishing a rover test area in labs. The goal of the overall project is to create a safer testing environment by mimicking the soil-to-tire …

Breaking The Vapor Barrier And Scale: Revolutionizing Steel Quenching With Ultrasound Technology, Anthony O. Santos

Williams Honors College, Honors Research Projects

The quenching process is a fundamental heat treatment used to enhance material properties by heating steel to its austenitizing temperature and rapidly cooling it to form high-strength martensite. However, this process is often hindered by two surface barriers: the Leidenfrost effect (vapor blanket) and oxide scale. These cooling limitations restrict the use of steel in high-performance aerospace applications due to inconsistent material properties and unpredictable engineering properties. This research investigates the use of fully submersible, 50-watt 40 kHz ultrasound technology to improve cooling rates in a Jominy test [4]. Through numerical simulations and experimental validation, the study demonstrates that acoustic …

Large Telescope Mount For Long Exposure Photos, Payne M. Landis, Anna J. Gray

Williams Honors College, Honors Research Projects

When viewing the stars through a telescope, it is common that the object you are viewing drifts out of view. Many amateur astronomers seek to capture long exposure images of the stars, planets, and galaxies with commercially available sky tracking telescope mounts. The complication is that these telescope mounts are both incredibly expensive and have low weight limits. These issues limit accessibility to these products based on the telescope. For each person, telescope parameters determine the amount of light and magnification that can be viewed, which then determines exposures time for adequate photo results. The options on the market for …

Optimization Of Post-Processing Methods For Additively Manufactured Metals, Julia R. Carano

Williams Honors College, Honors Research Projects

Ultrasonic Nanocrystal Surface Modification (UNSM) is a process used to change the surface hardness of flat-faced materials. It is a machining process using a high-powered laser and a blunt-tipped tool at high speeds which aims to improve the uniformity of the surface on most metals. By heating and pressing the surface of the workpiece, the grains of the material become less rounded and more cohesive on a microscopic level. This, ideally, results in a workpiece with improved material properties. The changes were previously observed through hardness testing.

Thermal Radiation Effects On Particles From Plasma Arc Radiation, Reece Davis, Joseph Mcgee

Williams Honors College, Honors Research Projects

Understanding the radiation heating and transport of both microparticles and nanoparticles is a phenomenon that is critical for both space and Earth sciences. In space, these particles are heated by plasma arcs within ionized space clouds or solar flares and can be present the path of deep space missions and orbital satellites. While on Earth, processes such as forest fires, nuclear fusion, and microchip manufacturing include the plasma arc heating of particles. These particles lay within the Mie Scattering Regime and Rayleigh Scattering Regime and emit radiation differently based on their diameter. New mathematical and computational modeling has been conducted …

Predictive Structural Modeling In Ansys And Destructive Testing For Composite Structures, Dylan Matthews, Grant Abraham, Andrew Raineri

Williams Honors College, Honors Research Projects

Composite structures are central to the performance and reliability of Zips Racing’s Formula SAE vehicles, yet the team currently relies on historical data and partially unvalidated assumptions when selecting carbon fiber layups. This project aims to establish a quantitative, experimentally validated framework for designing composite components through the integration of simulation modeling, physical fabrication, and destructive mechanical testing. Analytical laminate theory models developed in MATLAB and laminate simulations created in Ansys ACP will be used to predict stiffness, strength, and failure characteristics for a range of candidate layups. These predictions will be validated through controlled testing of fabricated composite coupons …

Automated Soil Resetting System For Extraterrestrial Regolith Simulation, Parker W. Brennan, Anthony C. Daniels

Williams Honors College, Honors Research Projects

This project focuses on designing an automated soil resetting system for extraterrestrial regolith simulation. The system will prepare a regolith simulant testbed to a desired, repeatable density, enabling reliable wheel–terrain testing for planetary rover research. Manual soil preparation currently exposes testers to hazardous particulates and produces inconsistent results.

The proposed system will integrate mechanical and control elements to reset the soil bed safely and efficiently. A combination of raking and vibrational methods will be explored, with feedback sensors and automation to achieve target density control. The research will proceed through literature review, benchtop experimentation, prototype design, and full-scale testing over …

Development Of A Hypersonic Aerodynamic Analysis Methodology For Conceptual Design, Stephen Atkins

Mechanical and Aerospace Engineering Theses

This research promotes the advancement of the Aerospace Vehicle Design Synthesis (AVDS) system through the development of a low order numerical hypersonic aerodynamic analysis methodology. The AVDS methodology outlines how to utilize disciplinary tools and relies on the careful selection or development of those tools to carry out the aerospace vehicle sizing and evaluation processes. An overview of the aerodynamic analysis process from both industrial and academic perspectives is presented to provide context for the present work. The different philosophies of design are discussed insofar as they dictate how aerodynamic tools are used in the design process. Next, a literature …

Vibration-Based Control Of Nonlinear Dynamic Systems, Ossyris N. Bury

Honors Undergraduate Theses

This thesis investigates vibration-based stability as a mechanism for achieving self-stabilizing nonlinear dynamic motion in engineered systems. Inspired by biological hovering flight, in which periodic wing motion can passively enhance stability, the study explores how controlled oscillations can be used to stabilize otherwise unstable mechanical configurations. The research centers on a simplified dynamic model based on the Kapitza pendulum, an inverted pendulum with a vertically oscillating base, which serves as a foundation for understanding vibration-induced stabilization. Analytical modeling using Lagrangian mechanics is employed to derive the governing equations of motion and identify the excitation conditions required for stable inverted behavior. …

Investigation Of The Impact Of The Shape Of The Wings On Formula E Racing Car Performance: Enhancements For Optimal Aerodynamics, Ednie Marthe Adlaikah Jozil

Honors Undergraduate Theses

The aerodynamic performance of a Formula E chassis significantly dictates its overall race efficiency, directly impacting crucial parameters such as battery range and thermal management. This thesis investigates the external aerodynamics of the baseline Gen 2 Formula E car and evaluates the performance gains of two novel aerodynamic packages: a "Fully Modified" configuration and a "Flat Rear Wing" design. Computational Fluid Dynamics (CFD) simulations were conducted to analyze drag coefficients (Cd), downforce generation, and vehicle wake structures at race-relevant free-stream velocities (e.g., 37 m/s and 89 m/s). To ensure numerical robustness, the computational setup was validated using a smooth sphere …