Other Aerospace Engineering Commons^™

Numerical And Experimental Evaluation Of A Simple, Low-Energy Lunar Volatile Separation Technology, Eleanor L. Zimmermann

Dissertations, Master's Theses and Master's Reports

In-situ resource utilization (ISRU) is the practice of finding, extracting, and using the local resources found on extraterrestrial bodies, such as the Moon and Mars. ISRU enables in-situ production of mission consumables—such as rocket fuel and potable water—which will be critical for establishing a sustainable human presence on the Moon, a goal NASA intends to accomplish by 2028 with the Artemis missions. The separation and liquefaction of locally extracted volatiles—such as water, CO₂, and Methane—is an essential component in lunar surface sustainability, but there are very few technologies being developed for this purpose. This report introduces the Radiative …

Modeling And Testing Chain Trencher Excavator And Cone Penetrometer Robotic Prospecting Systems For Lunar In-Situ Resource Utilization, Marcello C. Guadagno

Dissertations, Master's Theses and Master's Reports

The Artemis Missions aim to establish a sustained human presence on the Moon, requiring In-Situ Resource Utilization (ISRU) of water-ice deposits in permanently shadowed regions. Two critical capabilities must be developed to enable ISRU at scale: prospecting instruments that can characterize the spatial distribution and geotechnical properties of icy regolith in situ, and excavation systems that can extract hardened icy regolith efficiently. This dissertation addresses both needs through the development and testing of a Percussive Heated Cone Penetrometer (PHCP) for geotechnical prospecting and a chain trencher excavator for icy regolith mining.

The PHCP was developed across eight design iterations and …

Development Of An Atmospheric Particle Imaging System (Apis), James W. Hebert

University of Kentucky Master's Theses

The study of atmospheric particulates plays a crucial role in both climate change studies and the improvement of hypersonic travel. The current issue at hand is a lack of knowledge of stratospheric particulate content and the high cost that is associated with conducting research at these altitudes. This project focuses on the development of an Atmospheric Particle Imaging System (APIS) to be a low-weight, low-cost optical payload. The goal is to make a device that can be mounted onto an uncrewed aerial system that has the capability of imaging particulates moving at steady flow velocities, and thereby characterize the individual …

Evaluation Of Tactile Cueing Embedded In An Aviation Headset On Pilot Altitude Control, Nicholas D. Wilson, Jessica Van Bree, Matthew Cleveland, Sunny Charakuru, Thomas Petros, Richard Ferraro, Kouhyar Tavakolian

Journal of Aviation/Aerospace Education & Research

This study evaluated the effectiveness of tactile cueing integrated into a pilot’s headset on pilot altitude control during simulated instrument conditions. Pilots typically rely on visual and auditory inputs to maintain situational awareness, but in high-workload or instrument meteorological conditions (IMC), these channels can become overloaded. One underutilized alternative for alerting is a tactile cueing apparatus. Using an X-Plane simulation of a Piper Archer equipped with a G-1000 avionics suite, 39 FAA-certified pilots flew two precision approaches. The experimental group (n = 20) received haptic cues via ear seal-embedded tactors when deviating from assigned altitude or glideslope. The control group …

Evaluating The Impact Of Cognitive Distraction On Spaceflight-Relevant Task Performance Using Surface Electromyography And Motion Capture, Allyson K. Mitchell

UNF Graduate Theses and Dissertations

Cognitive distraction poses a risk to astronaut performance during complex, multitasking operations in spaceflight environments. This study examined the effects of cognitive load on neuromuscular coordination and task execution using surface electromyography (sEMG) and motion capture. Thirteen participants performed spaceflight-relevant tasks under undistracted and distracted conditions, with distraction induced through verbal questioning. EMG signals from eight upper-extremity muscles were processed using envelope filtering, peak normalization, and time normalization to enable inter-subject comparison, and group-level mean activation with standard deviation was analyzed. While overall muscle activation was similar between conditions, phase-dependent differences were observed, with undistracted trials showing higher activation during …

Performance Of Adaptive Wingtips On A Tailless Supersonic Business Jet, Khushi Piparava

2025 Fall Honors Capstones Projects - Archive

The growing interest in supersonic business travel has renewed focus on efficient, low-drag configurations that can achieve high performance while maintaining stability and structural integrity. This research investigates the aerodynamic and structural implications of adaptive folding wingtips on a tailless supersonic business jet (SBJ) concept designed under the SkyBreaker senior design program. Using a conceptual aerodynamic model based on linearized supersonic theory, the Polhamus leading-edge suction analogy, and an empirical compression-lift correlation, the study evaluates how varying wingtip droop angles influence lift, drag, lift-to-drag ratio (L/D), and static stability. The analysis was performed parametrically in MATLAB, using geometry inputs derived …

Exploratory Study Of Semiconductor Nanomembranes In Em Applications, Grant D. Heileman

Electrical and Computer Engineering ETDs

Antenna systems are a cornerstone of modern technologies, playing an increasingly vital role in their advancement. As demand for compact, high-performance, and adaptable communication platforms grows reconfigurable antenna technologies are becoming essential. This research explores a novel front-end reconfigurable antenna system (FERAS) architecture that leverages the mechanical flexibility and photoconductive behavior of semiconductor nanomembrane (SNM) devices. By exploiting the emergent properties of ultra-thin silicon (Si) or gallium arsenide (GaAs) nanomaterials and optically exciting these samples using vertical-cavity surface-emitting laser (VCSEL) arrays, this study develops lightweight, low-cost, deployable antenna structures for satellite communications, remote sensing, GPS, and radar. Despite their significant …

Sal-E: Responsive Space Pathfinder Mission, Adrian Serniak, Kayla Wong

College of Engineering Summer Undergraduate Research Program

The main objective of the SAL-E mission is to grow the Cal Poly CubeSat Lab’s (PolySat) capabilities in rapid spacecraft design and testing, as well as to provide the current generation of students with the opportunity to design, test, integrate, and communicate with a satellite. This summer we will mainly be focusing on aspects of spacecraft test and integration, as we prepare for our satellite handoff in the Fall. Specifically, we will be conducting satellite assembly, Thermal Vacuum Chamber (TVAC) Testing, Vibrations Testing, and software validation and testing on the flight unit satellite. Students participating in this multidisciplinary SURP will …

Hybrid Machine Learning--Finite Element Solvers For Solid And Fluid Mechanics, Victor Alcantara-Arias, Spandan Suthar

College of Engineering Summer Undergraduate Research Program

The goal of this project is to develop a new class of hybrid solvers for partial differential equations (PDEs) encountered in solid and fluid mechanics that blend traditional finite element methods (FEM) with modern machine learning algorithms. While FEM solvers are well developed, they can be computationally expensive for realistic problems. Machine learning algorithms have emerged as possible new solutions to cut down the computational cost associated with expensive FEM simulations, but these are typically not interpretable. Previous work on this topic resulted in a class of fully interpretable machine learning solvers for PDEs that had two primary drawbacks: (i) …

Unresolved Image Simulation For Space Situational Awareness Applications, Fox Coniglario

Doctoral Dissertations and Master's Theses

The knowledge of what lies in orbit around Earth is at best a guess. Decades of spaceflight, debris buildup, and vehicle collisions have contributed to a large number of objects that are simply not able to be catalogued. Ongoing efforts to catalog debris in orbit have reached limits by conventional measures and as such, research is active in the field of in-orbit space situational awareness. This thesis intends to help fill a hole in the development of such orbital platforms by assisting the development of image processing software pipelines though the simulation of unresolved space imagery. The simulation uses accurate …

Active Measurement Of A Micron-Order Gap Under High-Speed And High-Temperature Conditions, Andrew Becker

Doctoral Dissertations and Master's Theses

The hypersonic regime poses numerous challenges that researchers face in the development of hypersonic flight vehicles. Due to their excellent thermomechanical properties, ultra-high-temperature ceramics (UHTCs) have risen as a promising solution to act as a protective barrier between the harsh environment and surface materials of these flight bodies. The mechanical operation of a portable hypersonic simulation device was developed in-house and tested at Argonne National Laboratories (ANL) to gather in-situ material response of prospective UHTC samples when exposed to a hypersonic regime. An edge detection-based algorithm was developed and used in LabVIEW to monitor the health and operation of the …

High-Fidelity Modeling Of Evtol Rotor Unsteady Aerodynamic And Aeroacoustic Response To Time-Harmonic Gust, Vadim Voropayev

Doctoral Dissertations and Master's Theses

The rapid emergence of Urban Air Mobility (UAM) demands accurate prediction and mitigation of noise generated by electric vertical take-off and landing (eVTOL) aircraft operating in complex urban environments. Among the various noise sources, the aerodynamic and acoustic response of rotors to unsteady inflow represents a major uncertainty in community-noise assessment and certification. This thesis investigates the aerodynamic and aeroacoustic behavior of a representative eVTOL rotor subjected to time-harmonic inflow disturbances, providing a detailed numerical framework to quantify how periodic gusts influence rotor performance, unsteady loading, and sound radiation.

The study employs a three-stage computational methodology using the open-source solver …

Methodologies And Applications Of Precision Shot Peening To Hole Or Slot Geometry, James C. Hoffman

15th International Conference on Shot Peening

Shot peening, a commonly used method of fatigue and surface enhancement, is a critical process in many of the components in the aerospace industry. When it comes to small holes and/or slot geometries in these components, the process can become a challenge when these features are smaller than a conventional size Almen strip. In these cases, a decision must be made about how to process this type of geometry. Oftentimes, the method to apply the shot peen process is already defined in a process specification or part print so we must adhere to that method. If a method is not …

A Feasibility Study Into The Usability And Application Of An Unmanned Aerial Vehicle For Aircraft Inspection And Quality Assurance Inspections, Reece P. Bhave

Journal of Aviation Technology and Engineering

The global aviation industry is often characterized as one of the safest modes of transportation in the modern world. With an abundance of quality assurance inspections and checks to determine operations safety, modern-day commercial aircraft that are utilized for passenger and cargo flights are held to a higher safety standard defined by regulatory bodies, such as the Federal Aviation Administration in the United States of America and the European Union Aviation Safety Agency in the European Union. While these quality standards are maintained via a series of inspections, checks, and preventative maintenance procedures, they are limited to only visual or …

An Inexpensive, Open, And Extensible Hardware-In-The-Loop Cubesat Test And Simulation Infrastructure, Andrew Greenberg, Glenn Lebrasseur, Max Eltzroth, Rose Edington, Anna Meneely, Maxwell Millar

Small Satellite Conference

We have developed an inexpensive, open source, and extensible hardware-in-the-loop (HIL) test and simulation system to allow even small CubeSat teams to dramatically improve their testing infrastructure to increase reliability during flight.

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

Impact Assessment Of Multipoint Video Distribution Systems On Satellite Signal Reception, Ali Karaki, Hiba Abdallah, Mohammed Al-Husseini, Hamza Issa

BAU Journal - Science and Technology

This work analyzes the potential interference impact on Geostationary Earth Orbit (GEO) satellites stemming from Multipoint Video Distribution System (MVDS) transmissions, specifically examining side lobe radiation within Lebanon. Through simulations and analysis of antenna emission patterns, the study measures how varying MVDS power outputs affect the carrier-to-noise (C/N) ratio at the satellite receiver. Results reveal a significant impairment of signal quality, showing the C/N falling to -2.3 dB with an MVDS power level of 0 dBW under current system parameters. To counter this interference, a potential two-phase mitigation strategy is presented and its effectiveness considered. The study contributes to improving …

Reusing Materials In The Aerospace Industry, Lama Alanazi, Burtegeljin Gombosuren, Byhalia Jewett

Beyond: Undergraduate Research Journal

This research explores the material recycling methods used by the aerospace industry, particularly in comparison to the reusability of aerospace materials and with the objective to find uses for recycled materials from aircraft. Through an analysis of various other material mitigation methods, it is apparent that the physical degradation of materials after they go through recycling processes and the cost of recycling are the most prominent issues holding the aerospace industry back from being able to recycle aircraft up to 100%. From a comparison of physical characteristics of materials after reprocessing, several materials were found to meet industry standards, while …

An Engineering Solution For Fan Aeroacoustics Measurements Correction In A Non-Anechoic Testing Environment, Saad-Eldin Taha, Mohamed Y.Zakaria, Mohamed Abdelgaied, M.M. Bassuoni Prof. Dr.

Journal of Engineering Research

Abstract- Nowadays, acoustic signatures of daily used applications are to be minimized. The study of noise generated through aerodynamic interaction with moving bodies has passed through different phases since the early 50s, and this leads to the evolvement of many analytical, empirical and computational techniques in order to be able to estimate the emitted noise. Concerning fan blades, until now the researches are still going for a reliable method for noise estimation during the early phases of design which help in the development of blades with a lower aeroacoustic signature, the Brooks, Pope and Marcolini (BPM) model was chosen to …

Sees Presentation: Small Satellites Power Systems, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "SEES Presentation: Small Satellites Power Systems" from June 12, 2025.