Floating Dock At Santa Rita Ranch: A Design And Cost Estimate Package Prepared For The Land Conservancy Of San Luis Obispo, Sophia Ann Federico

Construction Management

The purpose of this project is to provide the Land Conservancy of San Luis Obispo with three design options for a floating fishing/boat dock system that they want to build on a small lake located on a plot of land that they own and preserve called Santa Rita Ranch. The design package that I created includes drawings, weight and buoyancy calculations, a cost estimate, and product specs. My approach was to utilize my estimating skills that I have acquired from my construction management classes and from my work at a general contractor’s office in the preconstruction department. The design and …

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—A Comprehensive Flow Curve Analysis, Dimitri Feys, Helena Keller, Khadija El Cheikh, Egor Secrieru, Yannick Vanhove

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A comprehensive testing program was carried out to compare the rheological properties of flowable concrete that can be obtained from different rheometers. The results obtained from seven rheometers using vane or similar geometries are discussed. A comprehensive flow curve analysis is undertaken for further comparison of the various rheometers. Partially, large differences could be observed between the results obtained from the different rheometers. However, the device-specific trendlines are shown to have significant correlations with the overall baseline. Two potential causes of differences between results are highlighted: imposition/registration of torque/rotational velocity and discrepancies between the measured material flow behavior in the …

Field Implementation And Performance Of Fiber-Reinforced Low-Shrinkage Concrete For Bridge Deck Construction, Ahmed Abdelrazik, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Paper Reports on the Field Implementation of Fiber-Reinforced Concrete (FRC) Used for Redecking the Two-Span overpass Bridge in Missouri. the Spans Measured 38.4 and 35.05 M in Length. Modeling of the Structural Behavior of the Bridge Replacement Deck Indicated Significantly High Tensile Stresses at Midspan (Up to 45 MPa) Due to the Continuity of the Deck over the Four Precast Main Girders. Redecking of the Bridge and Casting of the Central Diaphragm Were Carried Out Continuously and Necessitated 40 Concrete Truck Deliveries of 252 M3 of FRC. Six Sensor Towers Were Installed in the Bridge Deck to Monitor Variations …

Preliminary Bond Capacity Exploration Between Monolayer Graphene And Cementitious Composites, Yanping Zhu, Chuanrui Guo, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Aims to Explore Bond Capacity between Monolayer Graphene and Cementitious Composites for the First Time through a Pullout Test. the Low-Pressure Chemical Vapor Deposition Method Was Used to Synthesize Monolayer Graphene on the Copper Substrate to Be Embedded in the Mortar Made by the Briquette Mold. the Bond Capacity between Them Was Higher Than the Tensile Strength of the Copper Sheet with As-Grown Monolayer Graphene on the Surface Since All Specimens Failed in Fracture with Embedment Length of More Than 30 Mm. the Monolayer Graphene Enhanced the Copper Tensile Fracture Stress and Normalized Energy during the Test as …

Out-Of-Plane Flexural Behavior Of Insulatedwall Panels Constructed With Large Insulation Thicknesses, Jacob Luebke, Fray F. Pozo-Lora, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Insulated concrete sandwich wall panels (ICSWPs) are gaining popularity as energy regulations become stricter worldwide. ICSWPs are now being constructed with thinner wythes and thicker insulation to keep up with the changing market, which is reducing material costs and increasing thermal and structural efficiency. However, there is a need for adequate experimental testing to validate the current design methods for these new panels. This research aims to provide that validation by comparing the predictions of four different methods with experimental data obtained from six large-scale panels. The study found that while current design methods adequately predict the behavior of thin …

Optimization Of Plastic Waste Integration In Cement Bricks, Yara Salah El-Din El-Metwally

Architectural Engineering

Implementing plastic waste in construction materials is a sustainable disposal method to overcome plastic pollution. The current study aims to optimize the integration of plastic waste in cement bricks regarding their thermomechanical properties in order to develop an eco‑friendly building material. Polyethylene terephthalate (PET) and high‑density polyethylene (HDPE) partially substituted cement with different ratios (0, 2.5, 5, 7.5, 10, 20%). The type that achieved better thermomechanical performance further replaced the other brick components; sand and coarse aggregates to determine the optimum replacement scenario and best design mix. Laboratory experiments have been carried out to measure the compressive strength, indirect tensile …

Outdoor Artificial Lighting Effects On Livability Of Pedestrian Paths In Urban Heritage Context, Chirine Traboulsi, Aya Hassoun, Mostafa Rabea, Mary Felix

BAU Journal - Creative Sustainable Development

Lighting is an important ecological factor that influences individuals’ outdoor activities as well as the development of livable communities in cities. Artificial outdoor lighting is vital in improving the quality of urban open places throughout the nighttime and has a significant impact on the pedestrians' night-time perception and mental safety. This study aims to uncover whether outdoor lighting has indeed an effect on the livability of the pedestrian paths of a community and if so, what is the optimal design that fits an urban heritage setting. The research employs a mixed methods approach, where both qualitative and quantitative methods are …

Upgrading Heritage Urban Public Spaces By Using Recycling Waste Plastic Materials, Aya Mostafa Hassoun, Mostafa Khalifa, Eslam M. Elsamahy, Khaled El-Daghar, Mary Felix

BAU Journal - Creative Sustainable Development

In low-income countries, population expansion and urbanization bring challenges of inadequate living standards to the fore. Some of the issues could be solved if well-functioning plastic recycling systems were built. To reduce the environmental burden and improve the overall situation in dense cities, the already existing local informal waste treatment system, which is widespread in many low-income nations, needs to be developed with efficient sorting and composting solutions. A case study is carried out in the city of Mina, Lebanon, with the goal of establishing a viable decentralized recycling plastic pavilion material. The effort aims to lessen the climate harm …

A Talent Management Based Framework For Developing Sustainable Quality Of Work Life In Architectural Design Firms In Egypt, Ayman Ahmed Ezzat Othman, Marwa Naguib Elwazer

Architectural Engineering

Purpose –This research aims to develop a talent management (TM) based framework to achieve a sustainable quality of work life (QWL) in architectural design firms (ADFs) in Egypt.

Design/methodology/approach – A research methodology consisted of literature review, case studies and a survey questionnaire, was designed to achieve the abovementioned aim. Firstly, the literature review was used to investigate the work environment’s demotivating factors in ADFs, TM strategies and process to depict the relationship between developing sustainable QWL and TM and finally explore how TM can assist in achieving Egypt’s vision 2030. Secondly, three case studies of ADFs from Denmark, Norway …

A Knowledge Management Based Framework For Enhancing The Learning Culture In Architectural Design Firms In Developing Countries, Ayman Ahmed Ezzat Othman, Mirna Mohamed Elkady

Architectural Engineering

Purpose – In spite of the active role of continuous learning on improving organisational performance, the construction industry generally and architectural design firms (ADFs) in particular are criticised for their inability to use organisational knowledge to foster learning culture towards enhancing their performance. This paper aims to develop a framework based on knowledge management (KM) to enhance the learning culture in ADFs in developing countries.

Design/methodology/approach – To achieve the abovementioned aim, a research methodology consisted of data collection, data analysis and action required is designed to achieve four objectives. First, to examine the nature of the construction industry in …

Assessment Of Design Standards For Fish Landing Centers In The City Of Aden, Abdulnasser Abdulla Alkaderi, Gawaher Khaled Fadhl

Emirates Journal for Engineering Research

ABSTRACT

The existence of fishing harbors became one of the factor that implies the performance of local fishermen. Since 2015, the fishing industry in Yemen has faced increased challenges, including a significant drop in the level of production; fish processing plants halting, and the disempowerment of the Ministry of Fish Wealth. Local fish landing centers and auction squares in the city of Aden suffer from a specific problem, which lies in their lack of many important services. Based on the problem, the study purposes to facilitate handling of fish products and provide comfortable environment for sellers, and consumers. Considering the …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

3d Printing Of Earthen Materials: Toward The Carbon-Zero Construction, Shiva Bhusal

Civil Engineering ETDs

In recent years, digital manufacturing techniques in the architecture and construction industry have rapidly gained attention, especially with 3D printing, also called additive manufacturing. The use of cement has been common in modern construction and is now being explored for 3D printing. However, due to cement's contribution to approximately 7 percent of global carbon emissions and its high cost, research on sustainable and greener materials has gained attention. Previous studies on alternative construction have examined the mechanical and rheological properties of soil mixes, but not much attention has been given to printability evaluation, shrinkage, and cracking, which can affect the …

The Dwelling And The Shed: Redefining The Homestead, Ryan Mattox

Bachelor of Architecture Theses - 5th Year

The homestead is the frontier of exploration. It is the place that shows people can take care of themselves through self-sufficient means. This place also looks at making a more sustainable population. That is partly due to the individual needing to take care of the environment around themselves so that the environment can provide for them.

My thesis project will look to create a technological and sustainable residential module that can be replicated and modified to create community based on self-sufficiency by means of sustainability. To achieve this goal, my thesis will look at combining the architectural elements of the …

معايير تقييم محطات النقل التبادلية بالتطبيق على محطة الجيزة التبادلية بالقاهرة الكبرى, Rania Adham, Abeer Galal, Maha Abd El Sattar

Emirates Journal for Engineering Research

يعتبر الاهتمام بترابط وكفاءة وسائل النقل العام في كل من البلدان المتقدمة والنامية من الأولويات الاستراتيجية من أجل تحقيق تنقل سلس وفعال، خاصة في المدن كثيفة التحضر والأنشطة، حيث يكون استخدام وسائل النقل المختلفة سمة أساسية في الحياة اليومية للناس. ويواجه انشاء محطات نقل الركاب بمختلف أنماطها عدة تحديات أهمها تحقيق هدف التنقل الامن للركاب بالتوافق مع معايير الاستدامة العمرانية والاقتصادية والاجتماعية والبيئية. يركز البحث على دراسة محطات نقل الركاب التبادلية وذلك من خلال استخلاص معايير لتقييم تلك المحطات من الدراسات النظرية والتجارب العالمية، ثم تطبيق تلك المعايير لتقييم إحدى المحطات التبادلية في إقليم القاهرة الكبرى. وينتهي البحث باستخلاص نتائج …

Linear Waltz With Nature: A Self-Supporting Infrastructure In Nature, Shangkun Zhong

Architecture Senior Theses

This project aims to create a sustainable system that addresses waste management issues in urban areas by examining the functionality of recycling infrastructures and how they can be integrated. The system will absorb waste and convert it into renewable energy to support a field station in Tibet, where self-sustainability is critical, due to the remote location. Architects often demonstrate their understanding of sustainability through various means such as integration, passive/energy-saving, and natural architecture. This thesis argues that a sustainable system such as CopenHill, can exemplify the combination of green-manifested design and recycle content as a sustainable cycle that supports human-nature …

Subterraneans: A Regional Earth Dwelling For Comfort And Beauty, Isaak Benchoff

Architecture Undergraduate Honors Theses

Subterraneans is a study of an affordable, self-sufficient, sustainable, and dignified housing prototype for the region of Northwest Arkansas. It is a design process investigation based on the ideas of turning a local, sustainable material into affordable homes that can be built within a community of people sharing land and resources. The homes would utilize as many natural materials as possible to minimize the impact on the Earth and the cost to the owners.

Research looked at many different vernacular building precedents as well as the work done by contemporary design firms in the area of economical, low-impact, and passively …

The Way Of Water: A Cultural Revival, Mariana Munoz

Architecture Senior Theses

THE WAY OF WATER: A CULTURAL REVIVAL MARIANA MUNOZ:

This thesis aims to address the challenges facing the coastal community of Condado, Puerto Rico, by proposing interventions that protect against floods and restore access to water, while also enhancing daily life and cultural practices. Through an examination of the community’s existing conditions, and answer three research questions: (1) how to mitigate flooding without displacing the community, (2) how to meet the needs of the community during times of emergency, and (3) how to integrate interventions into daily life and existing practices. The proposed interventions include a canal system to redirect …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

The Bridge Newsletter Spring 2023, Missouri University Of Science And Technology

The Bridge Newsletter

-Virtual reality in architectural engineering
-Steel Bridge team wins fifth consecutive competition
-S&T Volleyball star ‘jumps’ at research opportunity
-Benavides legacy continues