Architectural Engineering Commons^™

Homogeneous Flow Performance Of Steel-Fiber Reinforced Self-Consolidating Concrete For Repair Application: A Biphasic Approach, Naimeh Nouri, Masoud Hosseinpoor, Ammar Yahia, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, fiber-reinforced self-consolidating concrete (FR-SCC) was considered as a diphasic suspension of fiber and coarse aggregate (F-A ≥ 5 mm) skeleton in mortar suspension with solid particles finer than 5 mm. The coupled effect of the volumetric content of fibers, coarse aggregate particle-size distribution, and rheological properties of the mortar on the passing ability and dynamic stability of various FR-SCC mixtures was investigated. Nine high-strength and 10 conventional-strength FR-SCC mixtures for repair application were proportioned with water-to-binder ratios (W/B) of 0.35 and 0.42, respectively, and macro steel fibers of 0.1%–0.5% volumetric contents. The dosages of high-range water-reducer (HRWR) …

Effect Of Class C And Class F Fly Ash On Early-Age And Mature-Age Properties Of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, Monday Uchenna Okoronkwo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To Promote the Sustainable Development of Eco-Efficient Calcium Sulfoaluminate (CSA) Cements through the Partial Replacement of the CSA Clinker with Supplementary Cementitious Waste Products, the Effects of Coal Fly Ashes on the Early-Age and Mature-Age Properties of a Calcium Sulfoaluminate (CSA)-Based Cement Paste Were Investigated. the Impacts of Both Class C and Class F Fly Ashes on the Rheological Properties, Hydration Kinetics, and Compressive Strength Development of CSA Cement Paste Were Studied. Rheology-Based Workability Parameters, Representing the Rate of Loss of Flowability, the Rate of Hardening, and the Placement Limit, Were Characterized for the Pastes Prepared with Fixed Water-To-Cement (W/c) …

Rheological Characterization Of Ultra-High Performance Concrete For 3d Printing, Arun R. Arunothayan, Behzad Nematollahi, Kamal Khayat, Akilesh Ramesh, Jay G. Sanjayan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The authors recently developed a 3D-printable ultra-high performance fiber-reinforced concrete (3DP-UHPFRC) for additive construction of structural members with significantly reduced reliance on steel bars. This study investigates the rheological behavior of the developed 3DP-UHPFRC. The effects of two major factors affecting the performance of 3DP-UHPFRC, namely steel fiber volume (0, 1%, and 2%) and nano-clay (NC) content (0, 0.1%, and 0.2% by binder mass) on workability, static yield stress, dynamic yield stress, and apparent viscosity were determined. Test results showed that the inclusion of steel fibers and NC reduced the workability and led to a significant increase in the static …

Effect Of Additional Water Or Superplasticizer On Key Characteristics Of Cement Paste Made With Superabsorbent Polymer And Other Shrinkage Mitigating Materials, Kamran Aghaee, Ricarda Sposito, Karl Christian Thienel, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of superabsorbent polymer (SAP) coupled with expansive agent (EA) or shrinkage-reducing admixture (SRA) can effectively reduce shrinkage of cement-based materials. However, SAP particles at high contents can adversely affect rheological and mechanical properties. Securing proper workability can be accomplished by additional water or adjusting the superplasticizer (SP) demand. There is an uncertainty about the efficiency of these approaches to workability compensation. This study evaluates the effect of additional water or SP on key properties of cement paste made with SAP and relatively high content of EA or SRA. Macro and micro mechanisms underlying the effect of combined shrinkage …

A Framework To Predict Variability Characteristics In Building Load Profiles, Sam Moayedi, Andrew Parker, Kevin James, Xiaoyue Cheng, Michael Hempel, Hamid Sharif, Mahmoud A. Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The expansion of Advanced Metering Infrastructure (AMI) has provided building operators and researchers detailed information on building energy consumption. The majority of AMI systems, however, record data at relatively low resolutions of 15, 30, or 60 minutes, due to cost, storage and bandwidth limitations. Emerging applications in power flow analysis, Quasi-Static Time-Series Simulation (QSTS), smart grid integration and load matching, however, require data at higher resolutions. Short-term energy demand can deviate significantly from long-term averages, with an unknown magnitude and frequency when only low-resolution load profile data is available. This paper presents a novel data-driven approach to predict characteristics of …

Integration Of Real-Time Semantic Building Map Updating With Adaptive Monte Carlo Localization (Amcl) For Robust Indoor Mobile Robot Localization, Matthew Peavy, Pileun Kim, Hafiz Oyediran, Kyungki Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

A robot can accurately localize itself and navigate in an indoor environment based on information about the operating environment, often called a world or a map. While typical maps describe structural layouts of buildings, the accuracy of localization is significantly affected by nonstructural building elements and common items, such as doors, appliances, and furniture. This study enhances the robustness and accuracy of indoor robot localization by dynamically updating the semantic building map with non-structural elements detected by sensors. We propose modified Adaptive Monte Carlo Localization (AMCL), integrating object recognition and map updating into the traditional probabilistic localization. With the proposed …

Marshall, Il Brownfield/Superfund Site Project, Nathan Myers

2022 Fall Reports (Marshall, IL)

This course will examine modern public policymaking in the United States. We will examine the different forms that policy can take and how each branch of government can leave a lasting impact on policy. The course will investigate the environment in which policy in the U.S. is shaped and the key official and unofficial actors involved. The course will investigate how public policy issues are defined and earn a place on the policy agenda. The remainder of the course will focus on various criteria for evaluating policy: effectiveness, efficiency, equity, liberty, security, and resilience. The manner in which policy often …

Marshall Residential Development, Kimberly Smith

2022 Fall Reports (Marshall, IL)

Introduction and development of the design process through the exploration of abstract and realistic problem-solving applications. Design solutions are presented through the development of two- and three-dimensional presentation techniques.

Marshall, Il Housing Affordability Project, Nathan Myers

2022 Fall Reports (Marshall, IL)

This class is designed to provide a basic working understanding of statistical methods which are commonly used in the social sciences, including public administration. Students will learn the mathematical logic behind the procedures by calculating statistical formulas. Students will also gain proficiency in completing statistical procedures using Microsoft Excel (the Statistical Package for the Social Sciences, or SPSS, may also be used).

Integrating Life-Cycle Analysis Into Civil Infrastructure Resilience Decision Making: Illustrative Application To Seismic Resilience Modeling Of Us Communities, Milad Roohi, Jiate Li, W. Van De Lindt

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper aims to integrate life-cycle analysis into civil infrastructure resilience modeling and decision-making in seismic-prone communities. To achieve this aim, the authors present a methodology for modeling seismic life-cycle resilience of interdependent buildings and lifeline systems and subsequently informing resilience decisions directly related to the maintenance and retrofit of interdependent infrastructure to enhance a community’s physical, social, and economic systems. The methodology consists of 1) community data collection, 2) seismic hazard analysis, 3) physical damage analysis, and 4) system-level functionality and restoration analysis, 5) socio-economic impact analysis, 6) life-cycle optimization and retrofit decisionmaking. The methodology begins by developing geospatial …

Dissipated Hysteretic Energy Reconstruction For High-Resolution Seismic Monitoring Of Instrumented Buildings, Milad Roochi, Eric M. Hernández, David V. Rosowsky

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper proposes a high-resolution seismic monitoring framework that employs dissipated energy as a feature for damage detection and localization in instrumented building structures. The the methodology consists of (1) implementing a nonlinear state observer to reconstruct the dynamic response at all degrees of freedom (DoF) of a structural model, (2) employing the reconstructed response to estimate element-by-element forces and displacements, and (3) using estimated displacement, forces, and constitutive laws to estimate elementlevel dissipated energy. The main advantages of the proposed energy-based approach are that i) the proposed feature is physically meaningful and correlates well with the level of cyclic …

Economic Impact Of Land Use Planning (Transit-Oriented Development): A Comparative Analysis, Sam M

West Chester University Doctoral Projects

The problem explored in this mixed-method research is that many cities are unprepared for urban growth, which can only increase poverty and crime. The traditional transportation system is inadequate to support the increase of urbanism; it is responsible for polluting the air, increasing greenhouse gases, and losing thousands of lives annually due to car crashes and road-related accidents. The transportation sector is responsible for 28% of the overall greenhouse gas emissions (Environmental Protection Agency, 2018), and the economic costs of vehicle crashes in the United States totaled $340 billion (Department of Transportation, 2019).

This study aimed to measure how Transit …

Cold-Formed Steel Strength Predictions For Combined Bending And Torsion, Yu Xia, Robert S. Glauz, Benjamin W. Schafer, Michael Seek, Hannah B. Blum

Engineering Technology Faculty Publications

Locally slender cross-section members, such as cold-formed steel Cee and Zee sections, are susceptible to significant twisting and high warping torsion stresses. Torsion considerations are complicated by whether it is derived as a first-order effect from loading or a second-order effect from instability. The current design for combined bending and torsion interaction has some limitations, including only considering the first yield in torsion and ignoring the cross-section slenderness in torsion. Previous work has derived a simple uniform equation to predict the bimoment capacity and two bimoment strength curves for local and distortional buckling under torsion only. This work is extended …

Variation Of Moisture Content And Temperature Under The Road Shoulder Improved With Wicking Geotextile, Javad Galinmoghadam, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Several Pavement Distresses Are Associated with Excess Water in the Pavement System. Hence, Controlling Subsurface Water is Crucial to Pavement's Long-Term Performance. Improving Pavement Drainage is Commonly Used to Control the Water Content in Pavement Layers. Conventional Drainage Systems Can Work under Saturated Conditions but Cannot Effectively Drain Capillary Water. a New Type of Wicking Geotextile Has Been Developed that Can Drain Water under Both Saturated and Unsaturated Conditions. in This Study, the Performance of This New Type of Geotextile in Draining Water from a Paved Road Shoulder is Evaluated. a Full-Scale Test Section Along Interstate 44 Was Constructed and …

Green Roofs To Treat The Local Dwelling Environment Problems Within Egypt's Vision 2030, Abdullah Badawy Mohammed

Mansoura Engineering Journal

The continuous increase in the building ratio to green areas led to disappearing green spaces, and the vertical and horizontal expansion of dwellings as an urgent demand in cities led to various environmental, social, and economic risks. Hence, the research aims to facilitate the application of green roofs for their positive role in treating these risks and improving the performance of dwelling projects and all buildings according to the climate and local conditions. Therefore, the study addressed the history, concept, and significance of green roofs, besides their benefits on architectural and urban levels, according to the three sustainability pillars and …

A Review On Sustainable Disposal Of Plastic Waste By Integration In Construction Materials, Yara S. El-Metwally, Iman El-Mahallawi, Khaled M. Dewidar, Mostafa R. Refaat

Architectural Engineering

Over the last decades, plastic waste (PW) has increased exponentially and has become a serious threat to our planet, aquatic system and human health. Recycling or reusing PW in producing ecofriendly materials is an efficient solution to reduce plastic pollution and to minimize the depletion of raw materials as well. Previous studies have shown promising potentials of using PW in the construction sector, such as binder, aggregate, or substitute of cement and sand in concrete, brick or mortar. Laboratory results indicate that implementing plastic waste as aggregates in cement composites obtains higher thermal resistance and acoustical performance. However, a reduction …

Extending The Nno Ballistic Limit Equation To Foam-Filled Dual-Wall Systems, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A key component in the quantitative assessment of the risk posed to spacecraft by the micrometeoroid and orbital debris (MMOD) environment is frequently referred to as a ballistic limit equation (BLE). A frequently used BLE for dual-wall configurations (which are commonly used on spacecraft to protect them against the MMOD environment) is the New Non-Optimum, or "NNO", BLE. In design applications where a BLE is needed for a new structural system that has not yet been tested, but resembles to a fair degree a dual-wall system, it is common practice to equivalence the materials, thicknesses, etc., of the new system …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn C. Morrison

Patents

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2.

A Stereotomic Struggle, Jim Roche

Articles

Stone in architecture has “territorial and political implications” as its use and designation impact the human rights of the indigenous population. The craft of stereotomy is not just bequeathed from the Crusaders or more recent imperial colonists but has a diverse blended history that is deeply ingrained in Palestinian built culture. Such theses inform the experimental work of Elial and Yusef Anastas, two brother architects who operate from Bethlehem what they term a counter hegemonic practice with the stated aim of “decolonising architecture”.