Operations Research, Systems Engineering and Industrial Engineering Commons^™

Operations Research In Civil And Environmental Engineering, Nicholas Lownes

Open Educational Resource

The purpose of this text is introduce fundamental operations research techniques to the civil and/or environmental engineering student, providing a broad background in linear programming, integer programming and network optimization. The material is presented in such a manner so that the student does not need an extensive background in operations research or or linear algebra. Applications include transportation engineering, project management and general civil and environmental engineering applications.

Resources Based Planning Framework For Infrastructure Maintenance And Rehabilitation Projects, Heba Gad

Theses and Dissertations

Infrastructure maintenance and rehabilitation projects involve activities scattered over a large geographical area (e.g., scattered road segments maintenance, telecom towers maintenance program, etc.). Planning such projects require a resource-based approach that accounts for the implications of resource mobility between activities’ locations in terms of time & cost. Existing scheduling techniques fall short of addressing the unique challenges of the scattered nature of these projects in combination with organization's limited resources availability. To address this need, this research presents a resources-based planning framework for infrastructure maintenance and rehabilitation scattered projects with the objective of enhancing resources utilization achieving time and cost …

The Viability Of Electrification For Industrial Off-Road Vehicles In Construction, Caden Patrick Stoker

Construction Management

Federal and State legislation has been passed limiting the prospective propulsion options for heavy industrial off-road vehicles that general contractors can operate on the jobsite. The interest behind this research project is the viability of introducing fully electric off-road construction vehicles into the heavy civil construction industry and if the timeline for implementation is realistic or optimistic. As new rules and regulations pertaining to the future emissions requirements of civilian and commercial vehicles effect the country, the construction industry is spending billions in order to develop (and are currently developing) fully electric off-road industrial vehicles (dozers, front loaders, scrappers, dump …

Experimental Investigation Of The Self-Healing Potential Of Bacteria For Sustainable Concrete Structures, Pitiporn Asvapathanagul, Simone Galano, Andrea Calabrese, Mehran Rahmani, Maggie Ly, Daniela Flores, Michael Hernandez, Nicholas Banuelos

Mineta Transportation Institute

Although concrete is the most widely used building material in the world, its limited tensile strength makes cracking a common phenomenon in concrete elements. This study investigates the potential of autonomous self-healing as an eco-friendly and lowcost method to increase the durability of concrete. The crack-healing potential of different types of high-alkaline-tolerant bacteria or calcite-precipitation microorganisms is investigated. High-alkaline-tolerant bacteria and calcite-precipitation microorganisms were used to retrofit lab-fractured concrete samples. The samples healed with each of these bacteria groups were cast and tested under compressive load up to failure to measure the compressive strength of the concrete samples. The outcomes …

Optimizing Locations And Sizes Of Asphalt Concrete Plants In Karbala, Iraq, Ghayath Ali, Sawsan R Mohammad, Alaa M. Abdulhussein

Al-Bahir Journal for Engineering and Pure Sciences

This study develops and presents a methodology for determining the optimal geographic distribution and size of asphalt concrete plants in Karbala, Iraq, in order to minimize the cost of asphalt concrete produced. The purpose of this study is to discuss these points. The methodology can identify potential locations for asphalt concrete plants within a study area, considering the plants' operation and capital costs and the costs of transporting raw materials to the plants and asphalt concrete to demand centers. Matrix Laboratory (MATLAB) software have been used to program the methodology. This methodology has been applied to Karbala using actual data. …

Lessons Learned During The Early Phases Of A Modular Project: A Case Study Of Unlv's Solar Decathlon 2020 Project, Jin Ouk Choi, Seungtaek Lee, Eric Weber

Civil and Environmental Engineering and Construction Faculty Research

The U.S. Department of Energy conducts the Solar Decathlon competition as a student-based achievement that encourages sustainable design with energy efficiency and solar energy technologies. In the 2020 competition, the University of Nevada, Las Vegas (UNLV) team designed, fabricated, and constructed a net-zero modular house that applies innovative and highly efficient building technologies. This paper focused on the lessons learned during the early phases of this ongoing modular project. The research methodology included obtaining feedback from key project participants using a well-structured questionnaire. The results showed that the major items/challenges in the project’s planning phase included selecting the modular size, …

Analyzing Vulnerabilities In The Northwest Arkansas Highway Network Using Mathematical Optimization, Brandon Jerome

Industrial Engineering Undergraduate Honors Theses

The highway and bridge network is a critical infrastructure that allows for the free transportation of citizens and enables truck-borne freight transportation. Disruption of this system could be caused by a terrorist attack, natural disaster, growth of population, required repairs and upgrades, or collapse caused by old age or malfunction. In the event of a disruption cities and regions can experience increased traffic and supply chain shortages, thus causing cascading effects throughout surrounding areas. With this motivation, we develop a network interdiction optimization model to identify a limited subset of roads that, if disrupted, causes the greatest increase in the …

Quantifying Project Complexity To Resource Project Managers, Jereme R. Henrard

Theses and Dissertations

This research develops a multi-criteria decision analysis model to quantify project complexity and inform decision-makers in resource-constrained organizations with the Tyndall Program Management Office (PMO) as a case study. The complexity score is used as a risk metric to determine the appropriate number of skilled or novice project managers to effectively manage the PMO portfolio to mitigate cost and schedule overruns. The research provides an innovative approach to consider manning levels at the PMO and other project management-focused organizations/sections.

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Integration Management: A Bibliometric Study Of Research Trends, Shabir Hussain Khahro, Ayaz Babar, Fida Hussain Siddiqui, Tauha Hussain Ali, Ali Raza Khoso

Library Philosophy and Practice (e-journal)

Integration management has always been a topic of interest for researchers. It plays a significant role in the success of the projects. Integration management effectively incorporates all the aspects of projects and provides a roadmap towards their success. Based on the significance of the term, this paper assesses the research output of integration management since 1970 in different fields of the application using the Scopus database. The data was collected and analyzed through Microsoft Excel to analyze the research publications trend line, publication types and their access to the audience, organizations and countries involved, languages of publications, authors participating, and …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Fatigue Monitoring Through Wearable Sensors For Construction Workers, Srikanth Sagar Bangaru

LSU Doctoral Dissertations

About 40% of the US construction workforce experiences high-level fatigue, which leads to poor judgment, increased risk of injuries, a decrease in productivity, and a lower quality of work. Excessive fatigue from working in unpleasant working conditions, long working hours, or heavy workloads can aggravate fatigue's adverse effects, leading to work-related musculoskeletal disorders (WMSDs) and productivity loss. Therefore, it is essential to monitor fatigue to reduce the adverse effects and preventing long-term health problems. However, since fatigue demonstrates itself in several complex processes, there is no single standard measurement method for fatigue detection. This research aims to develop a system …

Analytical Assessment Of Project Complexity: A Guide To Managing Projects Through Reduction Of Complexity, Christopher Vanarsdale

Dissertations, Master's Theses and Master's Reports

This research discusses the characteristics that make projects difficult to manage. Project inefficiencies and failures can be attributed to the structure of a system. Developing a measurement for complexity based on the number and nature of interactions in the system can allow project complexity to be reduced while still meeting project objectives. Previous research has identified characteristics or markers of complex systems but does not address how to measure or how to reduce a system’s complexity.

The objective of this dissertation is to develop a metric for complexity that assists project and emergency managers in reducing project complexity either by …

United States Department Of Defense (Dod) Real Property Repair, Alterations, Maintenance, And Construction Project Contract Data: 2009–2020, Tyler Stout, Adam Teston, Brent T. Langhals, Justin D. Delorit, Carlton Hendrix, Steven J. Schuldt

Faculty Publications

Nearly one-half of all construction projects exceed planned costs and schedule, globally [1]. Owners and construction managers can analyze historical project performance data to inform cost and schedule overrun risk-reduction strategies. Though, the majority of open-source project datasets are limited by the number of projects, data dimensionality, and location. A significant global customer of the construction industry, the Department of Defense (DoD) maintains a vast database of historical project data that can be used to determine the sources and magnitude of construction schedule and cost overruns for many continental and international locations. The selection of data provided by the authors …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

A Case Study: The First Coastal Nuclear Decommissioning Project In California, Willie Aaron Quiros

Construction Management

San Onofre Nuclear Generating System (SONGS) is one of two nuclear power plants in California. Since the shut down in 2012, there is only one actively remaining, Diablo Canyon Nuclear Power Plant, which is set to shut down in 2024. This paper will examine the decommissioning of SONGS thus far; the first coastal nuclear decommissioning project in California’s stringent permitting process. This project was awarded as a joint venture to AECOM and Energy Solutions, both having experiencing in the field of nuclear decommissioning. This paper will outline what nuclear decommissioning challenges have been in the past; general steps of decommissioning …

The Subject Librarian Newsletter, Engineering And Computer Science, Fall 2017, Buenaventura "Ven" Basco

Buenaventura "Ven" Basco

No abstract provided.

The Subject Librarian Newsletter, Engineering And Computer Science, Fall 2017, Buenaventura "Ven" Basco

Libraries' Newsletters

No abstract provided.

Shortest Path Problem Under Trapezoidal Neutrosophic Information, Florentin Smarandache, Said Broumi, Mohamed Talea, Assia Bakali

Branch Mathematics and Statistics Faculty and Staff Publications

In this research paper, a new approach is proposed for computing the shortest path length from source node to destination node in a neutrosophic environment. The edges of the network are assigned by trapezoidal fuzzy neutrosophic numbers. A numerical example is provided to show the performance of the proposed approach.

A Critical Path Problem Using Triangular Neutrosophic Number, Florentin Smarandache, Mai Mohamed, Yongquan Zhou, Mohamed Abdel-Baset

Branch Mathematics and Statistics Faculty and Staff Publications

The Critical Path Method (CPM) is one of several related techniques for planning and managing of complicated projects in real world applications. In many situations, the data obtained for decision makers are only approximate, which gives rise of neutrosophic critical path problem. In this paper, the proposed method has been made to find the critical path in network diagram, whose activity time uncertain. The vague parameters in the network are represented by triangular neutrosophic numbers, instead of crisp numbers. At the end of paper, two illustrative examples are provided to validate the proposed approach.

Bim Assisted Design Process Automation For Pre-Engineered Buildings (Peb), Mohammad Delavar

Electronic Thesis and Dissertation Repository

The effective adoption and implementation of Building Information Modeling (BIM) is still challenging for the construction industry. However, studies and reports show a significant increase in the rate of BIM implementation and adoption in mainstream construction activities over the last five years. In contrast, Pre-Engineered Building (PEB) construction, a specialized construction system which provides a very efficient approach for construction of primarily industrial buildings, has not seen the same uptake in BIM implementation and adoption. The thesis reviews the benefits and the main applications of BIM for the PEB industry as well as challenges of its practical implementation. To facilitate …

A System-Of-Systems Framework For Assessment Of Resilience In Complex Construction Projects, Jin Zhu

FIU Electronic Theses and Dissertations

Uncertainty is a major reason of low efficiency in construction projects. Traditional approaches in dealing with uncertainty in projects focus on risk identification, mitigation, and transfer. These risk-based approaches may protect projects from identified risks. However, they cannot ensure the success of projects in environments with deep uncertainty. Hence, there is a need for a paradigm shift from risk-based to resilience-based approaches. A resilience-based approach focuses on enhancing project resilience as a capability to cope with known and unknown uncertainty. The objective of this research is to fill the knowledge gap and create the theory of resilience in the context …

Computing Research In Academia: Classifications, Keywords, Perceptions, And Connections, Sung Han Kim

Theses and Dissertations

The Association for Computing Machinery (ACM) recognizes five computing disciplines: Computer Science (CS), Computer Engineering (CE), Information Technology (IT), Information Systems (IS), and Software Engineering (SE). Founded in 1947 the ACM is the world's largest society for computing educators, researchers, and professionals. While Computer Science has been a degree program since 1962, the other four are relatively new. This research focuses on understanding the graduate research in four of the five ACM disciplines (CS, CE, IT, and IS) using a large body of thesis and dissertation metadata. SE is not found in the metadata and graduate work in SE is …

The Engagement Of Expert Opinions In The Modeling Of Multi-Attribute Decision Making For The Selection Of Project Delivery Methods In Building Construction, Issam H. Algraiw

Doctoral Dissertations

"Choosing the most appropriate project delivery method (PDM) available is acknowledged as a crucial issue in the construction industry. Both the choice and application of an unsuitable PDM can result in project failure. Likewise, the selection of a suitable PDM can increase the chance for project success. A method of selecting from among the seven PDMs recognized by the Construction Specifications Institute (CSI) was created in an attempt to address this issue.

This research was comprised of three objectives. The first objective was to determine the influential factors needed to select the appropriate PDMs available to the US construction industry. …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

Electronic Theses and Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

A Strategic Approach To Effectively Manage Supplier Quality Within The Construction Industry, Rufaidah Almaian

Graduate Theses and Dissertations

The aim of the research is to determine the best practices for supplier quality management (SQM) in the construction industry that ensure that the supplied materials and equipment for construction projects are within the quality requirements. The research is based on three main objectives. The first objective is to describe and assess the process of assuring supplier quality inside and outside the construction industry. The second objective is to develop a framework for the supplier quality process based on the collection of SQM practices from multiple data sources. The third objective is to assess the SQM practices within the developed …

Multi-Criteria Decision Modeling For Best Value Selections In Target Value Design Integrated Project Delivery, Brent Patrick Griffis

Master's Theses

Integrated Project Delivery (IPD) combined with Target Value Design (TVD) is a better way to deliver value for the client than traditional guaranteed maximum price (GMP) methods. With traditional GMP delivery methods, the interests of the parties are often at odds. The goal of IPD is to align all party interests in order to achieve a win-win scenario. Due to the aligning nature of IPD and the fact that each party’s success is dependent on achieving the project objectives as a whole; a non-biased, transparent, decision-making process is necessary in order to deliver the project objectives within the constraints of …

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

Applications Of Cobb-Douglas Production Function In Construction Time-Cost Analysis, Ashkan Hassani

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Cobb-Douglas Production Function was widely used in economics and productivity studies across many sectors. The function’s quantitative modeling of resource inputs and production outputs is appealing to the research domain of construction management. In this thesis we explored this function’s application in construction schedule crashing and project risk analysis related to duration of construction projects. Existing research on construction time-cost tradeoff issues rarely explore the origin of the crashing cost which is defined as the cost needed to shorten the project to the desired duration. In the existing literature crashing cost function was either assumed without much justification, or came …

User Friendly Computer Software For Construction Projects Delay Analysis, Kamel Ahmed Salem El Sayed

Archived Theses and Dissertations

Construction industry around the world is facing a huge revolution in terms of number of executed projects. Projects are no longer simple ones managed by few persons. Commercial buildings, high rise towers and bridges are being built everywhere. The majority of these projects are complex ones that face a lot of obstacles. Delays are one of the major obstacles that construction projects face and are very likely to occur. Generally, claims are the result of any delay in the construction progress. To be able to analyze the claim and assign the responsibility, the analyst has to perform a delay analysis. …