Operations Research, Systems Engineering and Industrial Engineering Commons^™

Resources Based Planning Framework For Infrastructure Maintenance And Rehabilitation Projects, Heba Gad

Theses and Dissertations

Infrastructure maintenance and rehabilitation projects involve activities scattered over a large geographical area (e.g., scattered road segments maintenance, telecom towers maintenance program, etc.). Planning such projects require a resource-based approach that accounts for the implications of resource mobility between activities’ locations in terms of time & cost. Existing scheduling techniques fall short of addressing the unique challenges of the scattered nature of these projects in combination with organization's limited resources availability. To address this need, this research presents a resources-based planning framework for infrastructure maintenance and rehabilitation scattered projects with the objective of enhancing resources utilization achieving time and cost …

The Viability Of Electrification For Industrial Off-Road Vehicles In Construction, Caden Patrick Stoker

Construction Management

Federal and State legislation has been passed limiting the prospective propulsion options for heavy industrial off-road vehicles that general contractors can operate on the jobsite. The interest behind this research project is the viability of introducing fully electric off-road construction vehicles into the heavy civil construction industry and if the timeline for implementation is realistic or optimistic. As new rules and regulations pertaining to the future emissions requirements of civilian and commercial vehicles effect the country, the construction industry is spending billions in order to develop (and are currently developing) fully electric off-road industrial vehicles (dozers, front loaders, scrappers, dump …

Long-Term Asset Prioritization To Support District Planning, Melissa R. Sallberg

Theses and Dissertations

The United States Air Force (USAF) relies on its installations to project military power across the globe. However, due to the deferred infrastructure maintenance and recapitalization backlog of $33 billion as of 2019 (Wilson & Goldfein, 2019), it is more critical than ever for base-level community planners to focus their attention to the projects that will achieve each installation’s long-term goals. The recent incorporation of asset management principles into the USAF District Planning Process allows a unique opportunity to improve the existing scoring model for a holistic look at what matters to enterprise leaders and community planners making the plans …

Analyzing Vulnerabilities In The Northwest Arkansas Highway Network Using Mathematical Optimization, Brandon Jerome

Industrial Engineering Undergraduate Honors Theses

The highway and bridge network is a critical infrastructure that allows for the free transportation of citizens and enables truck-borne freight transportation. Disruption of this system could be caused by a terrorist attack, natural disaster, growth of population, required repairs and upgrades, or collapse caused by old age or malfunction. In the event of a disruption cities and regions can experience increased traffic and supply chain shortages, thus causing cascading effects throughout surrounding areas. With this motivation, we develop a network interdiction optimization model to identify a limited subset of roads that, if disrupted, causes the greatest increase in the …

Quantifying Project Complexity To Resource Project Managers, Jereme R. Henrard

Theses and Dissertations

This research develops a multi-criteria decision analysis model to quantify project complexity and inform decision-makers in resource-constrained organizations with the Tyndall Program Management Office (PMO) as a case study. The complexity score is used as a risk metric to determine the appropriate number of skilled or novice project managers to effectively manage the PMO portfolio to mitigate cost and schedule overruns. The research provides an innovative approach to consider manning levels at the PMO and other project management-focused organizations/sections.

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Fatigue Monitoring Through Wearable Sensors For Construction Workers, Srikanth Sagar Bangaru

LSU Doctoral Dissertations

About 40% of the US construction workforce experiences high-level fatigue, which leads to poor judgment, increased risk of injuries, a decrease in productivity, and a lower quality of work. Excessive fatigue from working in unpleasant working conditions, long working hours, or heavy workloads can aggravate fatigue's adverse effects, leading to work-related musculoskeletal disorders (WMSDs) and productivity loss. Therefore, it is essential to monitor fatigue to reduce the adverse effects and preventing long-term health problems. However, since fatigue demonstrates itself in several complex processes, there is no single standard measurement method for fatigue detection. This research aims to develop a system …

Analytical Assessment Of Project Complexity: A Guide To Managing Projects Through Reduction Of Complexity, Christopher Vanarsdale

Dissertations, Master's Theses and Master's Reports

This research discusses the characteristics that make projects difficult to manage. Project inefficiencies and failures can be attributed to the structure of a system. Developing a measurement for complexity based on the number and nature of interactions in the system can allow project complexity to be reduced while still meeting project objectives. Previous research has identified characteristics or markers of complex systems but does not address how to measure or how to reduce a system’s complexity.

The objective of this dissertation is to develop a metric for complexity that assists project and emergency managers in reducing project complexity either by …

A Case Study: The First Coastal Nuclear Decommissioning Project In California, Willie Aaron Quiros

Construction Management

San Onofre Nuclear Generating System (SONGS) is one of two nuclear power plants in California. Since the shut down in 2012, there is only one actively remaining, Diablo Canyon Nuclear Power Plant, which is set to shut down in 2024. This paper will examine the decommissioning of SONGS thus far; the first coastal nuclear decommissioning project in California’s stringent permitting process. This project was awarded as a joint venture to AECOM and Energy Solutions, both having experiencing in the field of nuclear decommissioning. This paper will outline what nuclear decommissioning challenges have been in the past; general steps of decommissioning …

Bim Assisted Design Process Automation For Pre-Engineered Buildings (Peb), Mohammad Delavar

Electronic Thesis and Dissertation Repository

The effective adoption and implementation of Building Information Modeling (BIM) is still challenging for the construction industry. However, studies and reports show a significant increase in the rate of BIM implementation and adoption in mainstream construction activities over the last five years. In contrast, Pre-Engineered Building (PEB) construction, a specialized construction system which provides a very efficient approach for construction of primarily industrial buildings, has not seen the same uptake in BIM implementation and adoption. The thesis reviews the benefits and the main applications of BIM for the PEB industry as well as challenges of its practical implementation. To facilitate …

Computing Research In Academia: Classifications, Keywords, Perceptions, And Connections, Sung Han Kim

Theses and Dissertations

The Association for Computing Machinery (ACM) recognizes five computing disciplines: Computer Science (CS), Computer Engineering (CE), Information Technology (IT), Information Systems (IS), and Software Engineering (SE). Founded in 1947 the ACM is the world's largest society for computing educators, researchers, and professionals. While Computer Science has been a degree program since 1962, the other four are relatively new. This research focuses on understanding the graduate research in four of the five ACM disciplines (CS, CE, IT, and IS) using a large body of thesis and dissertation metadata. SE is not found in the metadata and graduate work in SE is …

The Engagement Of Expert Opinions In The Modeling Of Multi-Attribute Decision Making For The Selection Of Project Delivery Methods In Building Construction, Issam H. Algraiw

Doctoral Dissertations

"Choosing the most appropriate project delivery method (PDM) available is acknowledged as a crucial issue in the construction industry. Both the choice and application of an unsuitable PDM can result in project failure. Likewise, the selection of a suitable PDM can increase the chance for project success. A method of selecting from among the seven PDMs recognized by the Construction Specifications Institute (CSI) was created in an attempt to address this issue.

This research was comprised of three objectives. The first objective was to determine the influential factors needed to select the appropriate PDMs available to the US construction industry. …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

Electronic Theses and Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

A Strategic Approach To Effectively Manage Supplier Quality Within The Construction Industry, Rufaidah Almaian

Graduate Theses and Dissertations

The aim of the research is to determine the best practices for supplier quality management (SQM) in the construction industry that ensure that the supplied materials and equipment for construction projects are within the quality requirements. The research is based on three main objectives. The first objective is to describe and assess the process of assuring supplier quality inside and outside the construction industry. The second objective is to develop a framework for the supplier quality process based on the collection of SQM practices from multiple data sources. The third objective is to assess the SQM practices within the developed …

Multi-Criteria Decision Modeling For Best Value Selections In Target Value Design Integrated Project Delivery, Brent Patrick Griffis

Master's Theses

Integrated Project Delivery (IPD) combined with Target Value Design (TVD) is a better way to deliver value for the client than traditional guaranteed maximum price (GMP) methods. With traditional GMP delivery methods, the interests of the parties are often at odds. The goal of IPD is to align all party interests in order to achieve a win-win scenario. Due to the aligning nature of IPD and the fact that each party’s success is dependent on achieving the project objectives as a whole; a non-biased, transparent, decision-making process is necessary in order to deliver the project objectives within the constraints of …

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

User Friendly Computer Software For Construction Projects Delay Analysis, Kamel Ahmed Salem El Sayed

Archived Theses and Dissertations

Construction industry around the world is facing a huge revolution in terms of number of executed projects. Projects are no longer simple ones managed by few persons. Commercial buildings, high rise towers and bridges are being built everywhere. The majority of these projects are complex ones that face a lot of obstacles. Delays are one of the major obstacles that construction projects face and are very likely to occur. Generally, claims are the result of any delay in the construction progress. To be able to analyze the claim and assign the responsibility, the analyst has to perform a delay analysis. …

Computer Usage In The Construction Industry And Construction Education, Stephen Douglas Stulken

Dissertations and Theses @ UNI

The rapid growth of computer usage in American society, and in the construction industry in particular, has important implications for construction education programs. There is a lack of current information about computer usage in the construction industry. Without this information, construction educators are less likely to provide students with relevant computer competencies that relate to the needs of the construction industry.

The objective of this study was to determine to what extent construction education programs provide the necessary computer competencies for their students. This was accomplished by comparing the current status of computer usage in the construction industry with computer-related …