Engineering Commons^™

Holographic Fabrication Of Photonic Crystals Using Multidimensional Phase Masks, Yuankun Lin, Ahmad Harb, Daniel Rodriguez, Karen Lozano, Di Xu, K. P. Chen

Mechanical Engineering Faculty Publications and Presentations

This paper reports the experimental approaches to the fabrication of two-layer integrated phase masks and the fabrication of photonic crystal templates using the phase mask based on holographic lithography technique. The photonic crystal template is formed by exposing photoresist mixtures to five-beam interference patterns generated through the phase mask. The fabricated phase mask consists of two layers of orthogonally oriented gratings produced in a liquid crystal and photoresist mixture. A polymerization-induced phase separation preserves the grating structure during the exposure. The vertical spatial separation between two layers of gratings produces a phase difference among diffracted laser beams, which enables the …

Experiments And Models For The Thermal Response Of Railroad Tapered-Roller Bearings, Constantine Tarawneh, Kevin D. Cole, Brent Wilson, Fadi Alnaimat

Mechanical Engineering Faculty Publications and Presentations

The need to understand and quantify the heat transfer paths within tapered-roller bearings is of great importance in the railroad industry since bearing cup temperature measurement is the primary tool utilized in the removal of distressed bearings from service. Experiments were performed to acquire temperature histories at several locations on a stationary bearing subjected to heat sources imbedded in two rollers. The experimental results were compared to zero- and first-order thermal models to estimate overall heat transfer coefficients from the bearing. The results presented here can be used to explain some of the mechanisms that lead to overheating of tapered-roller …

A Comparison Of Three Phase Induction Motor Performance Subjected To Frequency, Voltage, And Load Changes By Pwm And Square Wave Inverters, Aliosman Demirbas

Masters Theses and Doctoral Dissertations

This paper presents a comparison of three-phase induction motor performance subjected to frequency, voltage and load changes by Square wave inverter and Pulse Width Modulated (PWM) inverter. A computer program which is backed by a laboratory study is used to characterize the motor performance during the comparison. A 1 hp induction motor is tested by a Square wave and a PWM inverter and the motor performance data including various harmonic losses at 30 Hz, 40 Hz and at 60 Hz are measured. An advanced electrical model that accounts for the skin effect in the rotor bar to predict motor impedance …

A Device For Noninvasive Assessment Of Vascular Impairment Risk In The Lower Extremity, Michael J. Hoffmann, Paul E. Knudson, M. Barbara Silver-Thorn

Biomedical Engineering Faculty Research and Publications

The repeatability and resolution of the clinical gold standard of vascular assessment, the ankle-brachial index (ABI), was compared to that of a new device that dynamically assesses tissue perfusion during external loading utilizing laser Doppler flowmetry. Eight subjects of varying levels of vascular impairment were tested in successive weeks using two different sites on the subject's posterior calf. These new measures included the perfusion decrease as well as the unloading delay during cyclic loading. Some new dynamic tissue perfusion measures demonstrated comparable levels of reproducibility with the ABI (e.g., 10%-20%). Only the unloading delay showed potentially enhanced resolution over ABI …

Quantitative Rrna-Targeted Solution-Based Hybridization Assay Using Peptide Nucleic Acid Molecular Beacons, Xu Li, Eberhard Morgenroth, Lutgarde Raskin

Department of Civil and Environmental Engineering: Faculty Publications

The potential of a solution-based hybridization assay using peptide nucleic acid (PNA) molecular beacon (MB) probes to quantify 16S rRNA of specific populations in RNA extracts of environmental samples was evaluated by designing PNA MB probes for the genera Dechloromonas and Dechlorosoma. In a kinetic study with 16S rRNA from pure cultures, the hybridization of PNA MB to target 16S rRNA exhibited a higher final hybridization signal and a lower apparent rate constant than the hybridizations to nontarget 16S rRNAs. A concentration of 10 mM NaCl in the hybridization buffer was found to be optimal for maximizing the difference between …

Neural-Network-Based State Feedback Control Of A Nonlinear Discrete-Time System In Nonstrict Feedback Form, Pingan He, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a suite of adaptive neural network (NN) controllers is designed to deliver a desired tracking performance for the control of an unknown, second-order, nonlinear discrete-time system expressed in nonstrict feedback form. In the first approach, two feedforward NNs are employed in the controller with tracking error as the feedback variable whereas in the adaptive critic NN architecture, three feedforward NNs are used. In the adaptive critic architecture, two action NNs produce virtual and actual control inputs, respectively, whereas the third critic NN approximates certain strategic utility function and its output is employed for tuning action NN weights …

Pmu Placement For Power System Observability Using Binary Particle Swarm Optimization, S. Chakrabarti, Ganesh K. Venayagamoorthy, E. Kyriakides

Electrical and Computer Engineering Faculty Research & Creative Works

A binary particle swarm optimization (BPSO) based methodology for the optimal placement of phasor measurement units (PMUs) for complete observability of a power system is presented in this paper. The objectives of the optimization problem are to minimize the total number of PMUs required, and to maximize the measurement redundancy at the power system buses. Simulation results on the IEEE 14-bus and 30-bus test systems are presented in this paper.

A Circuit Model For Esd Performance Analysis Of Printed Circuit Boards, Byong-Su Seol, Jong-Sung Lee, Jae-Deok Lim, Hyungseok Lee, Harkbyeong Park, Argha Nandy, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

This paper provides a SPICE-compatible circuit model for characterizing electrostatic discharge (ESD) clamping performance of protection devices mounted on printed circuit boards (PCBs). An equivalent circuit model for a commercial ESD generator is introduced and a simulation methodology of an ESD protection device with non-linear resistance characteristic using voltage controlled current source is described. These models combined to create a full circuit model with a PCB model in a SPICE-like circuit simulator. Comparison results between the simulated and measured are presented to verify the accuracy of the proposed circuit model. A trade-off analysis between the ESD clamping performance and signal …

Determination Of Vibrational Energy Levels And Transition Dipole Moments Of Co2 Molecules By Density Functional Theory, Zhi Liang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An Efficient Method is Presented to Calculate the Intra-Molecular Potential Energies and Electrical Dipole Moments of CO2 Molecules at the Electronic Ground State by Solving the Kohn-Sham (KS) Equation for a Total of 101 992 Nuclear Configurations. the Projector-Augmented Wave (PAW) Exchange-Correlation Potential Functionals and Plane Wave (PW) Basis Functions Were Used in Solving the KS Equation. the Calculated Intra-Molecular Potential Function Was Then Included in the Pure Vibrational Schrödinger Equation to Determine the Vibrational Energy Eigen Values and Eigen Functions. the Vibrational Wave Functions Combined with the Calculated Dipole Moment Function Were Used to Determine the Transition Dipole Moments. …

Analysis And Design Of Interleaving Multiphase Dc-To-Dc Converter With Input Lc Filter, Kevin Thomas Delrosso

Master's Theses

The future of microprocessors is unknown. Over the past 40 years, their historical trend has been for adopting smaller and more powerful designs that drive the world that we live in today. The state of the microprocessor business today faces a crossroad, wishing to continue on the historical trend of doubling the number of transistors on a chip every 18 months (Moore’s Law) but also facing the realistic task of needing to power these sophisticated devices. With the low voltages and high currents that are required for these microprocessors to operate, it poses a difficult task for the future designers …

High Speed Wavelength Tuning Of Sgdbr Lasers For Optical Coherence Tomography Applications, Benjamin Maher

Master's Theses

The application of Sample Grated Distributed Bragg Reflector (SGDBR) wavelength tunable lasers for swept-wavelength Optical Coherence Tomography (OCT) is explored. OCT is a method of measuring reflectivity versus distance into samples under test with a focused infrared light source. Swept wavelength OCT requires a laser light source that is capable of sweeping its wavelength quickly over the entire wavelength range of the tunable laser. Fast sweeping of the laser's wavelength enables real-time imaging of a wide surface area of the surface under test. This thesis will show that SGDBR lasers can be designed to meet the fast wavelength ramp speeds …

Application Of Parent-Child Uav Tasking For Wildfire Detection And Response, Stephen T. Kubik

Master's Theses

In recent years, unmanned aerial vehicles (UAVs) have become a dominant force in the aerospace industry. Recent technological developments have moved these aircraft from remote operation roles to more active response missions. Of particular interest is the possibility of applying UAVs toward solving complex problems in long-endurance missions. Under that belief, the feasibility of utilizing UAVs for wildfire detection and response was investigated in a partnership that included NASA’s Aeronautics Research Mission Directorate and Science Mission Directorate, and the United States Forest Service. Under NASA’s Intelligent Mission Management (IMM) project, research was conducted to develop a mission architecture that would …

Using Archived Its Data To Measure The Operational Benefits Of A System-Wide Adaptive Ramp Metering System, Robert L. Bertini, Christopher Monsere, Oren Eshel, Soyoung Ahn

Civil and Environmental Engineering Faculty Publications and Presentations

A System-Wide Adaptive Ramp Metering (SWARM) system has been implemented in the Portland, Oregon metropolitan area, replacing the previous pre-timed ramp-metering system that had been in operation since 1981. SWARM has been deployed on six major corridors and operates during the morning and afternoon peak hours. This report presents results of a "before" and "after" evaluation of the performance of two freeway corridors as part of ongoing efforts to measure the benefits of the new SWARM system, as compared to the pre-timed system. The study benefited from using the existing regional data, surveillance and communications infrastructure in addition to a …

Structural Properties And Crystallization Of Sodium Tellurite Glasses, Kresimir Furic, Masa Rajic-Linaric, C. S. Ray, A. Šantić, Andrea Moguš-Milanković, D. E. Day

Materials Science and Engineering Faculty Research & Creative Works

The structural properties and crystallization behaviour of xNa2O-(100-x)TeO2 (0 <= x <= 33.3, x-% mole fraction) glasses have been investigated by Raman spectroscopy, X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The Raman spectra of glasses show systematic changes in structural units, from TeO4 trigonal bypiramids (tbps) to TeO3 trigonal pyramids (tps) with increasing Na2O content in glass. These structural changes are result of Te-eqOax-Te disruption and the formation of non-bridging oxygens (NBOs) in glass network. when heated at 623 K for 10 h glasses crystallized to different phases: alpha-TeO2, Na2Te4O9 and a new crystalline phase which is believed to be a polymorph of Na2Te2O5.

Theoretical Determination Of Subcritical Sequent Depths For Complete And Incomplete Hydraulic Jumps In Closed Conduits Of Any Shape, Nathan John Lowe

Theses and Dissertations

In order to predict hydraulic jump characteristics for channel design, the jump height may be determined by calculating the subcritical sequent depth from momentum theory. In closed conduits, however, outlet submergence may fill the conduit entirely before the expected sequent depth is reached. This is called an incomplete or pressure jump (as opposed to a complete or free-surface jump), because pressure flow conditions prevail downstream. Since the momentum equation involves terms for the top width, area, and centroid of flow, the subcritical sequent depth is a function of the conduit shape in addition to the upstream depth and Froude number. …

Application Of Structural Control For Civil Engineering Structures, Abdollah Shafieezadeh

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study presents the application of control methods in seismic mitigation of structural responses. The study consists of two parts. In the first section, fractional order filters are utilized to enhance the performance of the conventional LQR method for optimal robust control of a simple civil structure. The introduced filters modify the state variables fed back to the constant gain controller. Four combinations of fractional order filter and LQR are considered and optimized based on a new performance criterion defined in the paper. Introducing fractional order filters is shown to improve the results considerably for both the artificially generated ground …

Evaluation Of Arrayed-Field Concentration Measurements And U. S. Epa-Regulatory Models For The Determination Of Mixed-Source Particulate Matter Emissions, Derek Jones

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With the continued population growth and the blurring of the urban and rural interface, air quality impacts associated with agricultural particle-producing processes are becoming increasingly important. There is a lack of emission rate data from these source types and no prescribed measurement technique available to the agricultural and regulatory communities. One technique that has shown promise is combining field measurements with inverse modeling. This approach was used herein to examine particulate emissions from an almond harvesting operation, a cotton ginning facility, and comparative emissions from conservation versus conventional tillage practices. EPAapproved models ISCST3 and AERMOD were used with AirMetrics samplers. …

Experiments In Distributed Multi-Robot Coordination, Larry Dale Ballard

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Consensus control algorithms for multi-agent systems are an area of much research. Several consensus control laws are experimentally validated on a multi-robot testbed in this thesis. A graphical user interface (GUI) is developed that simplies use of the testbed, as well as allows the execution of the testbed programs to be divided across multiple computers. This not only provides a more powerful computing environment, but a more realistic communication environment for the testbed. A method for a time varying or dynamic formation is both proposed and experimentally validated on the testbed. This research also explores a method for dynamic group …

Effective Practices Of Project Lead The Way Partnership Teams, Cody J. Reutzel

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study was to gather information from Project Lead The Way (PLTW) partnership team experts. This project follows the methodology of a modified Delphi study. A review of literature in the areas of curriculum development, pre-college engineering, and the Delphi research technique provided the background for the structure utilized. Top programs from across the country were questioned to identify and come to a consensus on top components essential to developing and utilizing a successful PLTW partnership team. The components were categorized into two lists: effective practices utilized to make a program successful and effective practices employed by …

Design Of Tunable Edge-Coupled Microstrip Bandpass Filters, Srinidhi V. Kaveri

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis is a study of tunability of edge-coupled filters. Microstrip edge-coupled bandpass filters are planar structures and have advantages such as easy design procedures and simple integration into circuits.

Three tuning techniques were implemented. The first technique involved the loading of one open end of each coupled into tunable capacitors. The second technique used a tunable resonator in series with the edge-coupled blocks. The final design made use of tunable feedback sections.

A detailed mathematical analysis of each design was performed. MATLAB code based on the analyses was written. The MATLAB simulations were compared to Agilent Advanced Design System …

Hydrogen Production By Anaerobic Fermentation Using Agricultural And Food Processing Wastes Utilizing A Two-Stage Digestion System, Reese S. Thompson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Hydrogen production by means of anaerobic fermentation was researched utilizing three different substrates. Synthetic wastewater, dairy manure, and cheese whey were combined together at different concentrations under batch anaerobic conditions to determine the optimal hydrogen producing potential and waste treatment of each. Cheese whey at a concentration of 55% was combined with dairy manure at a concentration of 45% to produce 1.53 liters of hydrogen per liter of substrate. These results are significant because the control, synthetic wastewater, which was a glucose-based substrate, produced less hydrogen, 1.34 liters per liter of substrate, than the mixture of cheese whey and dairy …

Estimating Total Phosphorus And Total Suspended Solids Loads From High Frequency Data, Amber Spackman Jones

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Frequently measured turbidity was examined as a surrogate for total phosphorus (TP) and total suspended solids (TSS) loads at two locations in the Little Bear River, Utah, USA. Using regression techniques, equations were developed for TP and TSS as functions of turbidity. The equations accounted for censored data, and additional explanatory variables to represent hydrological conditions were considered for inclusion in the equations. By using the resulting surrogate relationships with high frequency turbidity measurements, high frequency estimates of TP and TSS concentrations were calculated. To examine the effect of sampling frequency, reference loads were determined from the concentration records for …

A C To Register Transfer Level Algorithm Using Structured Circuit Templates: A Case Study With Simulated Annealing, Jonathan D. Phillips

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A tool flow is presented for deriving simulated annealing accelerator circuits on a field programmable gate array (FPGA) from C source code by exploring architecture solutions that conform to a preset template through scheduling and mapping algorithms. A case study carried out on simulated annealing-based Autonomous Mission Planning and Scheduling (AMPS) software used for autonomous spacecraft systems is explained. The goal of the research is an automated method for the derivation of a hardware design that maximizes performance while minimizing the FPGA footprint. Results obtained are compared with a peer C to register transfer level (RTL) logic tool, a state-of-the-art …

Distributed Control For Robotic Swarms Using Centroidal Voronoi Tessellations, Shelley Rounds

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis introduces a design combining an emerging area in robotics with a well established mathematical research topic: swarm intelligence and Voronoi tessellations, respectively. The main objective for this research is to design an economical and robust swarm system to achieve distributed control. This research combines swarm intelligence with Voronoi tessellations to localize a source and create formations. Extensive software coding must be implemented for this design, such as the development of a discrete centroidal Voronoi tessellation (CVT) algorithm.

The ultimate purpose of this research is to advance the existing Mobile Actuator and Sensor Network (MASnet) platform to eventually develop …

Fabrication Of Long-Fiber-Reinforced Metal Matrix Composites Using Ultrasonic Consolidation, Yanzhe Yang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is a systematic study exploring a new fabrication methodology for long-fiber-reinforced metal matrix composites (MMCs) using a novel additive manufacturing technology. The research is devoted to the manufacture of long-fiber-reinforced MMC structures using the Ultrasonic Consolidation (UC) process. The main objectives of this research are to investigate the bond formation mechanisms and fiber embedment mechanisms during UC, and further to study the effects of processing parameters on bond formation and fiber embedment, and the resultant macroscopic mechanical properties of UC-made MMC structures.

From a fundamental research point of view, bond formation mechanisms and fiber embedment mechanisms have been …

Development Of Modular Thermal Control Architecture For Modular Satellites, Quinn Eric Young

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Research has been completed to determine the most effective thermal control architecture for modular satellites. This research investigated principles of modularity, modular spacecraft examples, thermal control methods, and advanced thermal control technologies. A modular spacecraft was designed as a case study to determine key influences and issues. A number of thermal control architectures were developed. Each was evaluated for compatibility with modularity principles, thermal control performance, and a realizable implementation. Thermal control performance was determined by simulating on-orbit conditions for a number of design reference missions, including traditional thermal control architecture used for comparison. An effective thermal control architecture was …

Student Achievement And Affective Traits In Electrical Engineering Laboratories Using Traditional And Computer-Based Instrumentation, Matthew D. Lammi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Distance education has the ability to transcend distance and time, reaching students anywhere at any time, particularly those underrepresented in engineering. Engineering is a practice-oriented profession requiring an interweaving of scientific theory and applied hands-on activities. Despite the need for distance education in engineering, few studies have systematically investigated the impact of student achievement and attitude in distance engineering laboratories. This quasi-experimental research addressed that need by studying the cognitive and affective domains of achievement in engineering laboratories while employing computer-based and traditional oscilloscopes. The students from two courses, electrical engineering for nonmajors and electronic fundamentals, were randomly assigned into …

Measuring And Modeling Of Plant Root Uptake Of Organic Chemicals, Erik Dettenmaier

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Determining the root uptake of xenobiotic organic chemicals into plants is critical for assessing the human and ecological health risks associated with the consumption of plants growing in contaminated environments. Root uptake of xenobiotic organics occurs passively in conjunction with transpiration and the transport from root to shoot is ultimately controlled by passage through one or more lipid root membranes. The transpiration stream concentration factor (TSCF), the ratio between the concentration of a chemical in the xylem to that in the solution used by the roots, is used to describe the relative ability of an organic chemical to be passively …

Modeling, Designing, Fabricating, And Testing Of Channel Panel Flat Plate Heat Pipes, James R. Harris

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Flat plate heat pipes are very efficient passive two-phase heat transport devices. Their high efficiency and low mass are desirable in the aerospace and electronics industries. The highly competitive nature of the thermal management industry results in little awareness of the capabilities of at plate heat pipes, which has resulted in only a few applications of the technology. In the year 2000 a research and development project sponsored by Space Dynamics Laboratory was launched to investigate building carbon-based at heat pipes. The flat configuration is desireable to incorporate many components onto one thermal management system. Development led to the adoption …

Angles-Only Navigation For Autonomous Orbital Rendezvous, David Charles Woffinden

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The proposed thesis of this dissertation has both a practical element and theoretical component which aim to answer key questions related to the use of angles-only navigation for autonomous orbital rendezvous. The first and fundamental principle to this work argues that an angles-only navigation filter can determine the relative position and orientation (pose) between two spacecraft to perform the necessary maneuvers and close proximity operations for autonomous orbital rendezvous. Second, the implementation of angles-only navigation for on-orbit applications is looked upon with skeptical eyes because of its perceived limitation of determining the relative range between two vehicles. This assumed, yet …