Colored Petri Net Based Modeling On Warship Command And Control Information Flow,
2019
Department of Information Security, Wuhan 430033, China;
Colored Petri Net Based Modeling On Warship Command And Control Information Flow, Xueguang Zhou, Weidong Lü, Zhimin Yuan
Journal of System Simulation
Abstract: Aiming at the current problems of the complexity, influence of human factors, reusability and others, this paper built a warship command and control (C2) information flow model and obtained the warship C2 model with command and feedback information flow. This paper also defined standard information flow and position structure, and solved the reusing issue. The authenticity of information flow guaranteed the objectivity of this model, which met the demands of different kinds of vessels, and promoted the compactness and fitness between C2 system and warship reality on the model level.
Identification And Prediction Of Room Temperature Delay Neural Network Model For Vav Air Conditioning,
2019
Dalian University of Technology, Dalian 116024, China;
Identification And Prediction Of Room Temperature Delay Neural Network Model For Vav Air Conditioning, Xiuming Li, Jili Zhang, Tianyi Zhao, Tingting Chen
Journal of System Simulation
Abstract: Aiming at the problem of mathematical description for dynamic response characteristic of indoor temperature time-delay system, the fundamental principle of neural network model identification is introduced in regulation process of variable air volume (VAV) air conditioning system. Considering the model structure of Elman neural network, this paper presents an optimal selection algorithm for layer delay coefficient in order to determine delay time between indoor temperature and regulation parameters; and a multiple-step prediction model of indoor temperature time-delay system based on Elman neural network is built. The effectiveness of the proposed method is validated through the simulation experiment.
Optimum Design For Crankshaft Of Mud Pump Based On Response Surface Model,
2019
1.School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China; ;
Optimum Design For Crankshaft Of Mud Pump Based On Response Surface Model, Liu Jun, Zhang Hong, Huang Hua, Chang Ping
Journal of System Simulation
Abstract: The mud pump is the heart of an oil rig, and the crankshaft is one of the key components of the mud pump. To achieve the lightweight structural design of the mud pump, it is very important to optimize the structure of the crankshaft. The model is simplified and the structure is analyzed theoretically. The optimization module is used to optimize the parameters;and the response surface model is established. The multi-objective genetic algorithm is used to optimize the design; and the scheme of slotting on the crankshaft flange is put forward according to the production process. Through the simulation …
Design And Implementation Of Asd Children’S Cognitive Education System Based On Unity3d,
2019
1. College of Electrical Engineering, North China University of Science and Technology, Tangshan 063210, China; ;
Design And Implementation Of Asd Children’S Cognitive Education System Based On Unity3d, Xuejing Gu, Kaifeng Zhang, Yucheng Guo, Zhiliang Wang
Journal of System Simulation
Abstract: ASD (autism spectrum disorder) is a broad sense of autism. In order to improve cognitive deficits of children with ASD, promote cognitive generalization in ASD children, an education system was designed using Unity3D. The built-in physical engine of Unity3D was used to create a game environment which conformed to the physical laws of the real world by simulating the effects of gravity, buoyancy and collision. The Agent technology and state machine were used to realize the representation and control of virtual scene. Camera and face detection technology were used to realize facial imitative cognitive training. The preliminary test showed …
Optimization For Unrelated Parallel Machine Scheduling With Deteriorating Jobs,
2019
1.School of Management Engineering, Zhengzhou University, Zhengzhou 450001, China; ;
Optimization For Unrelated Parallel Machine Scheduling With Deteriorating Jobs, Xuan Hua, Yingying Qin, Xueyuan Wang, Bailin Zhang
Journal of System Simulation
Abstract: Unrelated parallel machine scheduling problem with deteriorating jobs is studied with the objective of minimizing the maximum completion time. The processing time of a job varies with its beginning time which is denoted as an increasing function of its starting time. It is assumed that each job has its own different deterioration rate on each machine. A mathematical programming model is formulated for the NP-hard problem. An improved genetic algorithm based on two segment coding and self-adaptive adjustment of genetic parameters is then designed to make job scheduling and machine allocation more reasonable. Through the simulation experiments of different …
Design Of Adaptive Predictive Controller For Superheated Steam Temperature Control,
2019
1.Shanghai University of Electric Power Automation Engineering Academy, Shanghai 200082, China; ;
2.Shanghai Key Laboratory of Power Station Automation Technology, Shanghai 200082, China;
Design Of Adaptive Predictive Controller For Superheated Steam Temperature Control, Qian Hong, Yuqing Feng
Journal of System Simulation
Abstract: An adaptive model predictive controller for overheating steam temperature control of thermal power plants is designed, which is based on the control object with large delay, large inertia, nonlinearity and strong time-varying properties. Through the on-line identification and control of different models, compared with predictive controllers in a general model, in terms of adjusting the superheat steam temperature, the adjusting time can be shortened drastically, the overshoot can be reduced or even eliminated, and the dynamic performance is improved greatly when applying in adaptive model predictive controller. The results show that the adaptive model predictive controller, because of its …
Signal Control Strategy And Simulation For Vehicles Alternatively Passing Construction Area Of Two-Lane Road,
2019
1.School of Highway , Chang’an University, Xi’an 710064, China;;2.Virginia Polytechnic Institute and State University, Blacksburg, VA 24060, U.S;
Signal Control Strategy And Simulation For Vehicles Alternatively Passing Construction Area Of Two-Lane Road, Haipeng Shao, Binbin Zheng, Linxu Long
Journal of System Simulation
Abstract: The construction area of the two-lane roads can form the road bottlenecks easily, leading to the capacity of the road reducing. Aiming to keep the vehicle passing the construction area safely and efficiently, we added the strategy of signal control in the construction area. We built a suitable signal control model for the construction area of the two-lane road. By using the simulation software of Vissim, we established the related simulation models. By using the control variable method to change the simulation parameters and by changing the arrival traffic and speed, we got the influences and rules to the …
Semantic Value-Driven 3d Upright Posture Figure Model Transformation,
2019
1. Information School, Yunnan University, Kunming 650091, China;;2. Department of Computer Technology and Application, Qinghai Universiry, Xining 810016, China;
Semantic Value-Driven 3d Upright Posture Figure Model Transformation, Yangfu Ren, Yuanyuan Pu, Xu Dan, Wenhua Qian
Journal of System Simulation
Abstract: In medical equipment, clothing design, film production and computer games, 3D human body model is an indispensable element, but directly obtaining it by means of scanning the human body model does not directly apply in many environments, so we need to moderate deformation model according to the environment. The operation difficulty of the model of deformation is considered, and the deformation effect is achieved. For studying the 3D human body model deformation problem, the deformation of semantic driven model is introduced. Semantic values of height, leg length and shoulder height were obtained by measuring the position of joint points …
3d Mesh Editing Method For Virtual Double Eyelid Surgery,
2019
National Laboratory of Pattern Recognition Institute of Automation Chinese Academy of Sciences , Beijing 100190, China;
3d Mesh Editing Method For Virtual Double Eyelid Surgery, Guan Tong, Juntao Ye, Guanghui Ma, Xiaopeng Zhang
Journal of System Simulation
Abstract: A virtual cosmetic surgery system involves lots of human-computer interactions,and the achieved effects rely on the skills of the operator. Virtual double-fold eyelid surgery is a function that is either missing or implemented with less accuracy in commercial software. To solve these problems, we propose an algorithm that can automatically generate virtual double-fold eyelid path taking advantage of geodesic line. In terms of algorithms, this method adopts a self-adaptive subdivision strategy to avoid losing shapes of the deformation outcomes. Results of experiments show stability, high efficiency and usability of our method.
Thermodynamic Simulation Of Carbonitride Precipitation In Micro-Alloyed Steel,
2019
1. School of Information Science and Engineering, Wuhan University of Science and Technology, Wuhan 430081, China;;2. Engineering Research Center for Metallurgical Automation and Measurement Technology of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China;
Thermodynamic Simulation Of Carbonitride Precipitation In Micro-Alloyed Steel, Weigang Li, Yang Wei, Liu Chao, Baokang Yan
Journal of System Simulation
Abstract: A mathematical model for calculating the precipitation of carbonitride in the process of hot rolling of composite micro-alloyed steel is established, and the interaction between the carbonitride and AlN is considered. In view of the difficulties of the thermodynamic model that the variables are multiple, the equations are nonlinear and the boundary conditions are determined difficultly, the Newton-Raphson numerical algorithm characterized by coupled problem is adopted. The precipitation starting temperature and precipitation sequence of carbonitride and AlN at different compositions are determined. The equilibrium composition of elements in austenite, the composition and mass fraction of carbonitride precipitates, as well …
Application Of Constraint Force Equation Methodology In Aircraft Stage Separation Dynamics Simulation,
2019
National Key Laboratory of Science and Technology on Multispectral Information Processing, Automation College, Huazhong University of Science and Technology, Wuhan 430074, China;
Application Of Constraint Force Equation Methodology In Aircraft Stage Separation Dynamics Simulation, Yongji Wang, Bangbang Li, Liu Lei
Journal of System Simulation
Abstract: The separation process of two-stage aircraft can be divided into three periods: lock-up period, constraint period and detachment period. The guide pins have constraint on two stages, which permit only translation in X-axis direction. To avoid the complex force analysis, the guide pins can be regarded as a joint of one degree of freedom. By adding the constraint and freedom equations to traditional separation dynamics equations, a dynamics model based on constraint force equation (CFE) methodology was built. The constraint force and moment can be obtained by solving constraint force equations. The constraint force equation (CFE) methodology was …
Facial Expression Synthesis Using Mals-Based Bilinear Factorization Model,
2019
1. State Key Laboratory of Virtual Reality Technology and Systems, Beihang University, Beijing 100191, China; ;2. School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China;
Facial Expression Synthesis Using Mals-Based Bilinear Factorization Model, Jiaci Guo, Shuling Dai
Journal of System Simulation
Abstract: Study on the facial expression synthesis is a constructive and creative subject in the field of virtual reality technology. The bilinear model is used for facial expression synthesis by separating the identity factor and the expression factor. The translation procedure in the bilinear model always requires a repetitive computation of matrix inverse operations to reach the identity factor and the expression factor. This computation may be instable when the observation data has the correlation or noisy information. In order to increase the stability of the bilinear model for expression synthesis, the modified iterative least square (MALS) regression is introduced …
Encoder Fault Detection And Fault Tolerant Control Of 3d Stage Wire System Based On Fdre,
2019
1. College of Electrical and Information engineering, Lanzhou University of Technology, Lanzhou 730050, China; ;
Encoder Fault Detection And Fault Tolerant Control Of 3d Stage Wire System Based On Fdre, Li Wei, Zhenfu Ge, Fuyuan Shen, Jianxing Gong
Journal of System Simulation
Abstract: Aimed at the problem of encoder fault of 3D stage wire system, combined with LADRC, two kinds of fault tolerant control strategiesare presented based on fault diagnosis reliability evaluation (FDRE) to prevent the spread of fault effects in the system and causing accidents. Based on this, the soft and hard smooth transition soft redundant switching mechanism is designed. The simulation results show that the control strategy can ensure encoder fault detection in a timely and reliable manner, and effectively improve the safety and reliability of 3D stage wire system.
Serious Game Human-Computer Interaction Design For Rehabilitation Training,
2019
1. Faculty of Electrical Engineering and Computer Science, Ningbo University, Ningbo 315211, China; ;
Serious Game Human-Computer Interaction Design For Rehabilitation Training, Jiajia Wu, Liu Zhen, Huihuang Xu, Tingting Liu, Wang Jin, Yanjie Chai
Journal of System Simulation
Abstract: Constructing a human-computer interaction environment which can effectively enhance users’ experiences of serious game. By integrating the rehabilitation training process into an interactive game story, users can do their mental and body rehabilitation training in the community. The prototype of the game is realized by the game engine. Experimental results showed that using mouse to roam in the system is easier than other interaction method and the somatosensory interaction is convenient for exercising the limb. By designing emoji for virtual characters, it is easy for users to learn other people's emotions and the comfortable distances for others. The results …
Sliding Mode Auto Disturbance Rejection Control Of Pmsm Without Speed Sensor,
2019
1. Faculty of Electrical and Control Engineering, Liaoning Technical University, Huludao 125105, China; ;
Sliding Mode Auto Disturbance Rejection Control Of Pmsm Without Speed Sensor, Limin Hou, Yifu Ren, Hengfei Liu, Lin Dong
Journal of System Simulation
Abstract: Aiming at the problem of parameter setting and response speed of the traditional ADRC method, a kind of novel sliding mode auto disturbance rejection speed controller is designed, and a sliding mode adaptive speed control system of PMSM without speed sensor is established. The nonlinear disturbance observer (NDOB) is used to replace the extended state observer (ESO) integrated disturbance estimation. The sliding mode control is introduced in the nonlinear state error feedback control; the sliding mode ADRC current controller and speed controller are designed; and the stability is proved by using Lyapunov theory. The rotor position and speed of …
A New Memristor Chaotic System And Its Application In Image Encryption,
2019
1. School of Physics, Shijiazhuang University, Shijiazhuang 050035, China; ;
A New Memristor Chaotic System And Its Application In Image Encryption, Shuanghui Qu, Zhihong Yang, Xuwei Rong, Shuhua Wu
Journal of System Simulation
Abstract: A new memristor chaotic system is designed by the method of bringing an ion migration memristor into the Chen system equation. The basic dynamic characteristics of the memristive system are investigated via bifurcation, Lyapunov exponent et al, which proves the validity of the new system. The new memristor system is applied in the image encryption to improve the security of the encryption key. A dual encryption algorithm is used, which makes every pixel value of plaintext influence all pixel values of ciphertext. Although there is no direct link between plaintext and ciphertext, the sensibility of ciphertext varying with …
From Digital Twin To Digital Engineering Modeling And Simulation Entering A New Era,
2019
National Computer Network Emergency Response Technical Team/Coordination Center of China, Beijing 100029, China;
From Digital Twin To Digital Engineering Modeling And Simulation Entering A New Era, Zhang Bing, Li Xin, Xinxin Wan
Journal of System Simulation
Abstract: In the digital new era, all kinds of things and even the whole world can be digitized as a model. Simulation activities are conducted for various purposes, and the results can provide intelligent support for various decision-making. Digital twin is an important form of modeling and simulation application in the digital new era; it has been widely used in intelligent manufacturing, factories, buildings, smart cities and many other fields, showing a strong vitality; and its next step in the development direction is a comprehensive digital engineering. This paper reviews the history of the development of digital twin technology, analyzes …
Smart Design And Simulation Of Aerospace Control System Based On Digital Twin,
2019
1. Beijing Institute of Control Engineering, Beijing 100190, China;;2. Science and Technology on Space Intelligent Control Laboratory, Beijing 100190, China;
Smart Design And Simulation Of Aerospace Control System Based On Digital Twin, Xiaoxiang Liu, Tang Liang, Haibo Zeng, Yubai Liu, Xinbang Zhang
Journal of System Simulation
Abstract: In accordance with the demand for intelligent development of spacecraft, and on the basis of the existing model-driven aerospace control design and simulation system, the new technological architectures using the digital twin and digital thread technique are carried out to achieve intelligent scheme design, simulation verification and in-orbit analysis. Employing the intelligent interconnection concept of cyber-physical systems, the space-ground integrated big data analysis and knowledge automation system are proposed. Based on this, the practical application scenarios are put forward through the full development flow and the entire life cycle. Not only it covers the smart application of information technology, …
Overview Of Digital Twins Application And Safe Development,
2019
1. The National Computer Network Emergency Response Technical Team/Coordination Center of China(CNCERT/CC), Beijing 100029, China;;
Overview Of Digital Twins Application And Safe Development, Li Xin, Liu Xiu, Xinxin Wan
Journal of System Simulation
Abstract: The Digital Twins simulate the whole process of the manufacture, and promote the development of smart manufacturing and other fields. In view of the rapid development and application of Digital Twins, the concept and history of Digital Twins are outlined, and its related technology system is given. The main application and development trend of Digital Twins in intelligent manufacturing as while as the main characters of Digital Twins in smart cities are combed. The cyber security problem of Digital Twins is discussed for intelligent manufacturing and smart cities. The scheme and suggestion are given for ensuring the cyber security …
Model And Simulation Of Taxi Market With E-Hailing Application,
2019
School of Economics and Management, Beihang University, Beijing 100191, China;
Model And Simulation Of Taxi Market With E-Hailing Application, Tian Qiong, Jingtao Zhang
Journal of System Simulation
Abstract: The emergence and popularity of e-hailing applications offer a new way for taxi drivers and passengers to communicate on line, which not only changes the behaviors of passengers and reduce the idle rate of taxi, but also brings the cost of information for taxis and passengers. Referring to the classic circular city model and combining with the characteristics of new way to take taxis and the cost of information, a model of taxi market with e-hailing application is formulated, which describes the behavior of passengers waiting for idle taxis and taxis cruising for un-served passengers. We provided an algorithm …
