Aeronautical Vehicles Commons^™

Novel Uncrewed Aircraft Water Sampling Device, Justin Fratto, Avinash Muthu Krishnan, Kayla D. Taylor, David Zink, Marc Compere, Kevin Adkins

Discovery Day - Daytona Beach

Supported by the Environmental Protection Agency (EPA), this project’s objective is to create a novel simultaneous surface and discrete depth water sampler for use with an uncrewed aircraft, something which has not been done before. The device will be used to improve the spatiotemporal resolution of harmful algal bloom (HAB) monitoring on Lake Okeechobee in South Florida to provide timely and precise information on water quality and HABs. HABs are characterized by the EPA as certain species of algae that can produce harmful toxins and produce excessive blooms or growth in certain conditions. Often occurring in warmer months due to …

Advancing Vtol Tail-Sitter Stability Through Modern Flight Control And System Identification, Tobey Cram, Jacob House, Alexander Theophanis

Discovery Day - Daytona Beach

Title: Advancing VTOL Tail-Sitter Stability Through Modern Flight Control and System Identification   The concept of tail-sitter aircraft can be traced back to Nikola Tesla nearly 100 years ago; however, no aircraft with this novel design materialized until nearly 20 years later during World War II, when efforts were made to reduce reliance on runways. One notable design that emerged during the Cold War was the Convair XFY-1 Pogo. This design failed for reasons common to many others of the time: pilots had extreme difficulty landing while looking over their shoulders, and the technology of the era could not reliably maintain …

Adaptive Health Monitoring For Runtime Safety Assurance​ Of Advanced Air Mobility Applications, Michael Budihartono, Francisco Bustamante, Gabriela Gavilanez

Discovery Day - Daytona Beach

This work proposes a comprehensive, adaptive framework for abnormal condition detection and flight envelope prediction in complex systems. The approach integrates data reduction techniques, including principal component analysis and lower-dimensional projections, to efficiently distinguish between nominal and abnormal operational states while maintaining computational efficiency through metacognitive interventions. A hybrid detection architecture combines bio-inspired real-value negative selection algorithms with support vector machines, augmented by generative machine learning models to synthesize failure data and support training through digital twin environments. Online fault trend analysis enables continuous monitoring of system degradation, while the system dynamically adapts to operational variations by minimizing offline training …

Crowd Monitoring And Firearm Detection Uas, Arjun Nambiar, Sang-A Lee, Diego Espino, Will Obot Jr, Ethan Encarnacion, Jarrett Usui, Jacob D. Kline

Discovery Day - Daytona Beach

The increasing complexity of public safety operations in urban and high-density environments necessitates intelligent, mobile surveillance systems capable of real-time threat identification and situational awareness. Traditional monitoring approaches, such as fixed CCTV systems and manual observation, are often limited by coverage, scalability, and response latency in complex environments or large-scale events. This project addresses these challenges through the development of a computer vision-enabled Uncrewed Aerial System (UAS) designed for crowd monitoring and firearm detection. The primary objective is to design and validate a modular, Artificial Intelligence (AI)-Machine Learning (ML)-driven model capable of identifying firearms within dynamic environments while supporting real-time …

Enhancing Fibre–Matrix Interface Properties In Cfrps Using Cohesive Zone Modelling, Arjun Myadam, Alexander Skoppe

Discovery Day - Daytona Beach

Carbon fibre reinforced polymers (CFRPs) are extensively used in aerospace, automotive, and structural applications owing to their high specific strength, stiffness, and design flexibility. The mechanical performance of these composites is critically governed by the fibre–matrix interface, which controls stress transfer and directly influences damage initiation, crack propagation, and fracture behaviour. The interface strength is quantified through the interfacial shear strength (IFSS) and fracture energy, both serving as key indicators of composite integrity. Nanoscale fibre surface modifications are widely employed to enhance interfacial bonding and can also impart multifunctionality, such as capacitive properties, magnetic behaviour, and piezoelectricity. For instance, nanoscale …

Simplified Flight Controls For Urban Air Mobility (Uam), Sierra Martinez, Frank Cunningham Iv, Nicole Giordano, Olivia Honan, Katie Stubits, Heather Bond, Paul Seal, Brandon Ibarra

Discovery Day - Daytona Beach

Air taxis are meant to perform short-distance, lower-altitude flights in challenging terrain- whether it be maneuvering around skyscrapers in urban areas, or for emergency responders in remote, difficult to access areas. It is paramount that the control system is intuitive and user friendly, since air taxi pilots will likely receive less training than commercial airline pilots. The Human Factors Department is working to advance Urban Air Mobility (UAM) initiatives by evaluating alternative inceptors (ie. control systems) that might be used in Vertical Take-Off and Landing (VTOL) air taxi designs. The controller itself needs to have specific and distinct enough operations …

Nano Aircraft Using Underactuated Technology (Naut), Giol Vinyals I Roca

Discovery Day - Daytona Beach

The Nano Aircraft using Underactuated Technology (NAUT) project presents a novel swashplateless rotor system that achieves cyclic pitch control using a single actuator, eliminating the need for conventional multi-servo swashplate assemblies. This approach is specifically tailored for nano unmanned aircraft systems (UAS) operating within Advanced Air Mobility (AAM) environments, where size, weight, and power constraints demand highly efficient and simplified control architectures. A functional prototype has been developed and experimentally validated, demonstrating measurable cyclic pitch variation and effective control authority. Multiple mechanism variants are currently being investigated to evaluate performance trade-offs in responsiveness, mechanical efficiency, and aerodynamic effectiveness. These configurations …

Flightless Eagles And The Redbull Flugtag Experience: How We Built A Manned Low-Speed Glider Out Of Foam And Cardboard, Peter Ulrich, Vansh Varak, Tanay Agarwal, Stanlie Cerda-Cruz, Madison Warner, Rohan Patel

Discovery Day - Daytona Beach

This project documents the iterative engineering, design, and construction efforts behind 2 20-foot human-carrying gliders developed by a team of Embry-Riddle students for the Red Bull Flugtag competition. The challenge required balancing aerodynamic performance, structural efficiency, and themed creativity while adhering to strict dimensional and weight limits. Over two consecutive years, the team used both conceptual and computational methods, ranging from initial sketches and precedent research to software-based aerodynamic modeling, subscale testing, and full-scale fabrication, to optimize glide performance in a low-speed, low Reynolds number flight regime. The work emphasized the value of interdisciplinary collaboration, communication, and hands-on engineering judgment …

Project 337, Kaushal Meda, Tuhin Misra, Pranav Rathi, Vraj Patel, Diivyaang Desa, Sameera Patki, Vaidehi Saini, Roy Su

Discovery Day - Daytona Beach

Access to critical medical infrastructure and supplies can be limited in rural and remote communities, where long travel distances and limited transportation networks can delay emergency response/care. In fact, according to the National Library of Medicine, in the United States alone, “about 20% of the US population—more than 50 million people—live in rural areas, but only 9% of the nation's physicians practice in rural communities”, highlighting the challenges many communities face in accessing timely medical resources. Unmanned aerial vehicles (UAVs), however, offer a potential solution by providing fast and flexible delivery of critical life support medical payloads. Project 337, developed …

Starlink-Based Navigation System For Fixed-Wing Uav, Aidan Panter, Ayse Okatan, Spencer Richter, Carson Frankovic, Faheem Khan, Eldon Crossett, Oleg Sugatov, Dylan Hardt

Discovery Day - Daytona Beach

Conventional UAV navigation and control systems rely on short-range RF communication, imposing significant limitations on operational range, real-time control capabilities, and autonomous mission execution beyond visual line of sight (BVLOS). While existing research addresses regulatory frameworks, communication relay strategies, and positioning optimization for extended-range operations, a comprehensive and cost-effective solution integrating satellite-based Internet connectivity with web-accessible control remains absent from the literature. This project develops a Starlink-based navigation and control system for fixed-wing UAVs that overcomes traditional range constraints through low-earth orbit satellite and cell network connectivity. The system integrates a Starlink terminal with an onboard flight computer running custom …

Project Nightshade: Carrier-Based Multirole Navy Strike Fighter Aircraft, Matthew Kaplan, Alex Gardner, Adam Wanner, Sara Gonzalez, Joseph Deleo, Canyon Swaffar

Discovery Day - Daytona Beach

Project Nightshade: Detail Design for a Carrier-Based Multirole Strike Fighter This project focuses on the structural detail design of the wing box for a carrier-based multirole strike fighter, emphasizing strength, stiffness, and fatigue resistance under maneuver and carrier landing loads. The objective is to develop a structurally efficient configuration capable of supporting critical loading conditions while maintaining realistic weight and structural integrity. Classical aerospace structural analysis methods were used to size primary load-carrying components including spar caps, shear webs, and skin panels. Maneuver and gust load cases were applied to determine internal shear forces and bending moments, enabling calculation of …

Zfq-50 "Radiance", Craig Slovensky, Michael Rath Iii, Kyan Spaete, Long P. Nguyen, Woo Hyun Lee, Roman Czerniejewski

Discovery Day - Daytona Beach

This project presents the preliminary design of the ZFQ-50 "Radiance", a Collaborative Unmanned Vehicle (CUV) built around the VerdeGo VH-5 blended turbofan intended for military defense applications. This design presents a novel aircraft coupled with a powerplant that blends traditional combustion thrust with electrical power output, an new and evolving capability within the aerospace industry. This aircraft was sized considering multiple constraint parameters, configuration trade studies, CFD analysis, and mission requirements including carrier assisted take-off and landing, an effective operational range, and a loiter period with 40 kW of continuous power output from the powerplant. The selected configuration allows for …

Preliminary Jetpack Design For Air, Space, And Sea Applications, Andrew Thummel

Discovery Day - Daytona Beach

This course work is intended as an exploratory engineering and design program dedicated to the building and testing of an underwater jetpack design, using dynamic similarity principles to extrapolate how tested results and performance in an underwater environment transition to airborne or zero gravity testing. By testing underwater, it is estimated that the design will attain a Reynolds number in the range of 8 to 10 million, creating novel qualitative research on how a blended wing body jetpack design built at human scale performs and handles in extremely turbulent and high Reynolds number flows.

Trim Characteristics And Its Importance, Daviel Peralta

Discovery Day - Daytona Beach

This project will go into the characteristics that lead to the concept of “Trim adjustment” in aircraft by modeling and demonstrating physical principles and mathematical concepts under ideal conditions. We will derive an equation from the basic physical principles of torque and lift to demonstrate how the trim is adjusted in steady, constant velocity flow for the sake of the pilot’s ease of control and to induce stability in flight. These adjustments are considered differently with different types of aircraft; as such, we will be focusing on mono-fixed-winged aircraft with one engine and conventional helicopter designs. Both flying devices will …

Experimental Manufacturing Optimization Of 3d-Printed Ducted Fans, Stanlie Cerda-Cruz

Discovery Day - Daytona Beach

This study aims to assess the efficiency gains, feasibility, and practicality of 3D printing fan and ducts with pre and post processing techniques. With the rapid expansion of MAV use; labs, students, hobbyists, can benefit from manufacturing Electric Ducted Fans (EDFs), both fans and ducts, in-house rather than purchasing traditional propellers. There are several advantages of utilizing EDFs, as they can minimize wing tip vortices, reduce wake contraction, and induce a duct lip Coanda effect which all lead to an increased system efficiency. However, EDF implementation in MAV's remain largely unexplored due to the difficulty of development and the production …

Modelling Quadcopter Thrust And Torque Using Lu-Decomposition, Diya Patil

Discovery Day - Daytona Beach

3 & 4 motor systems have been in the world of aviation in many different forms as the field grows and evolves. To understand the complexities of an Unmanned Aerial Vehicle (UAV) and its stability, assessing the amount of thrust put into each motor can help generate the torque produced despite factors such as multidirectional movement. While a UAV does this multiple times a second, producing a simplified version of this calculation can aid in simpler models simulating UAV movement. Due to the popularity of the quadcopter drone, a simple algorithm depicting thrust through each spinning motor can aid in …

Powered Parachute Vehicle For Crew Transportation On Mars, Louis J. Spier

Beyond: Undergraduate Research Journal

To support possible future human presence on Mars where bases are likely to be spread apart, aerial vehicles could be used to transport crew and cargo between them. Designing and operating such a vehicle is very challenging because of the low atmospheric density on Mars compared to Earth, the logistics involved with transporting it to Mars, and the infrastructure necessary to operate it. This study discusses the problems involved with designing, building, and operating fixed-wing and powered parachute aircraft on Mars and presents a concept involving a powered parachute vehicle utilizing an inflatable parachute wing that can be packed together …

Optimal Integrated Cfd-Gnc Model For Drag-Based Reentry Dynamics, Sebastian Lopez

Doctoral Dissertations and Master's Theses

This research focuses on optimizing the control of a drag-maneuvering, Starship-class re-entry vehicle by closely integrating high-fidelity aerodynamic data derived from Computational Fluid Dynamics (CFD) simulations, specifically using StarCCM+. The aerodynamic models, tailored to the unique geometry of a drag-maneuvering body, are seamlessly incorporated into a guidance, navigation, and control (GNC) framework. This integration enables closed-loop CFD simulations with real-time control feedback, allowing for direct analysis and optimization of vehicle stability, trajectory, and control demands throughout the re-entry process.

Building upon the work of Gaglio and Bevilacqua, this advanced CFD-GNC model introduces high-order aerodynamic effects, such as aerodynamic moments and …

A Century Of Safer Skies: Statistical Insights Into Aviation Accidents And Death Rates, Abhijeet Regmi

Journal of Aviation Technology and Engineering

The purpose of this study is to determine whether the recent advancements in the technology used for aircraft maintenance and repair have resulted in an increase or decrease in the accident and fatality rates of aviation incidents and accidents. The primary concerns are the extremely low survival rates in aviation accidents and the necessity to determine whether or not the accident and fatality rates are declining in light of recent technological advancements. If the rate is rising, we must prioritize passenger and crew safety more and adhere to tight regulations when performing repairs and maintenance. The data were compared for …

Robust Real-Time Uav Target Tracking With Onboard Vision-Based Yaw Control, Rylan Malarchick, Jose Castelblanco, Enrique Amaya, Carmen Dimario, Graysen Brinkman, Chirag Kumar, Kiwon Yoon, Sajid Berhane

Beyond: Undergraduate Research Journal

Autonomous tracking of agile unmanned aerial vehicles (UAVs) presents significant challenges for real-time perception and control systems. This work presents AIRHOUND (Autonomous Intelligent Rotorcraft for Hostile Object Unified Navigation and Detection), a UAV platform implementing vision-based yaw tracking through a modular ROS2 software architecture. The system employs YOLOv8 object detection optimized with NVIDIA TensorRT for embedded deployment on an NVIDIA Jetson Orin companion computer. Detected targets are processed through a geometric tracking module that converts pixel coordinates to angular yaw errors using pinhole camera intrinsics, with a proportional controller generating rate-limited yaw commands. These commands are streamed to a PX4 …