Other Engineering Commons^™

Fire And Life Safety Analysis- College Campus Building, Jacob Ludeman

Fire Protection Engineering: Culminating Experience Project Reports

A Fire and Life Safety Analysis was performed as an academic exercise as part of the MS Fire Protection Engineering Program of California Polytechnic State University, San Luis Obispo. The project is a culminating report with regards to prescriptive based and performance based aspects for the fire and life safety analysis of a project building. These analyses were performed on a building located on a college campus in Southern California and is to remain nameless upon the request of the owner and architect. The building is in the School of Physical Sciences at the University it resides. The building houses …

Construction Innovation Center- Fire And Life Safety Analysis, Matthew Atwell

Fire Protection Engineering: Culminating Experience Project Reports

In this report you will find the analysis of existing fire protection systems and features that are installed in the Construction Innovation Center at California Polytechnic State University, San Luis Obispo. The Buildings construction was completed in 2008 and is separated into three separate buildings A, B, and C connected by an exterior balcony. This report is separated into two separate analysis Prescriptive and Performance.

The Prescriptive analysis reviews the buildings means of egress, fire alarm systems, the suppression systems, and the structural fire protection. The Prescriptive-based analysis of the Construction Innovation Center confirms that the building meets the requirements …

Building 43: Recreation Center - Cal Poly San Luis Obispo, Daniel Gonzalez

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this project is to analyze the Fire Protection systems of the Recreation Center on campus at California Polytechnic State University, San Luis Obispo. Only the building itself is analyzed in this project. This report provides both a prescriptive-based and performance-based analysis of the building. The prescriptive-based analysis includes an overview of the structural components and their fire resistance, the sprinkler system, the fire alarm system, as well as an egress analysis. The performance-based analysis consists of three different potential fire scenarios, with the first being modeled with both Pathfinder and Pyrosim. Resources used are the building’s floor …

Influencing Effective Electrical Distribution Modernization Through Advanced Metering, Jared R. Erickson

Theses and Dissertations

In 2013, the Department of Defense (DoD) required its services to implement advanced metering for the purpose of reducing energy usage (Department of Defense, 2013). Additionally, the DoD has aimed to improve its ability to assure a continuous energy supply to all of its installations. This study investigated processes for applying advanced meters on Air Force bases to increase energy assurance. This study also identified strategies for using advanced meters to influence infrastructure funding. This was accomplished through the use of extensive advanced meter data. The data was analyzed for outages and a procedure was created to locate outages in …

They're Only Nuclear Weapons: An Exploratory Analysis Of Safety Climate Within The Nuclear Enterprise, Brandon M. Clements

Theses and Dissertations

By possessing nuclear weapons, the United States Air Force is inherently exposed to extreme safety concerns. With multiple setbacks in recent years (e.g., unauthorized transport of nuclear weapons, cheating scandals, and career dissatisfaction), some have begun to wonder how safe the nuclear enterprise truly is. Building upon the concept of safety climate, this study explores safety climate constructs and trends associated with current nuclear maintenance safety climate survey data.

Respirable Dust Monitoring In Construction Sites And Visualization In Building Information Modeling Using Real-Time Sensor Data, Nour Smaoui, Kyungki Kim, Omprakash Gnawali, Young-Joo Lee, Wonho Suh

Durham School of Architectural Engineering and Construction: Faculty Publications

Construction activities, involving cutting, drilling, and grinding of materials, often produce toxic respirable dust that can cause fatal diseases and illnesses. To protect workers from breathing excessive amounts of respirable dust at job sites, superintendents should continuously monitor the level of respirable dust in workspaces and make timely interventions for overexposed workers. However, current practices of respirable dust monitoring have critical drawbacks, and superintendents cannot accurately estimate workers’ exposures to respirable dust or make prompt decisions to protect the workers. Therefore, there is a need for real-time air dust monitoring that can be deployed ubiquitously at a construction site and …

Subjectivity In Failure Mode Effects Analysis (Fmea) Severity Classification Within A Reliability Centered Maintenance (Rcm) Context, Marc Banghart, Kari Babski-Reeves, Linkan Bian, Lesley Strawderman

International Journal of Aviation, Aeronautics, and Aerospace

This research paper investigated subjectivity in the severity rating of failure modes within a risk analysis process. Although several risk analysis processes can be utilized, the study considered the application of Failure Modes Effects Analysis (FMEA) or Failure Modes Effects and Criticality Analysis (FMECA) due to its common use within the Aerospace Industry. The study investigated both differences in severity selection given varying amounts of experience as well as any association between severity selection and the provided input information. The main goal of the research was to investigate the impact of data quality on severity selection and to identify factors …

Beauchemin Residence, Hannah E. Rogers

Architectural Engineering

The following report details the structural engineering completed on the Beauchemin Residence, as well as the associated drawings, details, and special considerations. The Beauchemin Residence is an existing single story wood frame building on raised wood floor, located in the city of San Clemente. The scope of work includes calculations for a new roof, new walls (gravity & lateral), retrofit of the existing foundation, new foundation, and providing calculations. The process and progression of the structural design is documented, and correlated to the final product in the Appendix A & B.

Analyses Of Crowd-Sourced Sound Levels Of Restaurants And Bars In New York City, Gregory S. Farber, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

For several decades, there has been a significant need to better educate the public about noise pollution. A small number of small-scale studies have focused on the sound levels of restaurants and their impact on health and hearing. There have also been an increasing number of media articles stating that eating and drinking venues are getting increasingly loud making it more difficult for people to connect with others in conversation. This study reports on an exploratory large-scale noise survey of sound levels of 2,376 restaurants and bars in New York City using a novel smart-phone application and categorized them based …

Deep Gaze Velocity Analysis During Mammographic Reading For Biometric Identification Of Radiologists, Hong-Jun Yoon, Folami Alamudun, Kathy Hudson, Garnetta Morin-Ducote, Georgia Tourassi

Journal of Human Performance in Extreme Environments

Several studies have confirmed that the gaze velocity of the human eye can be utilized as a behavioral biometric or personalized biomarker. In this study, we leverage the local feature representation capacity of convolutional neural networks (CNNs) for eye gaze velocity analysis as the basis for biometric identification of radiologists performing breast cancer screening. Using gaze data collected from 10 radiologists reading 100 mammograms of various diagnoses, we compared the performance of a CNN-based classification algorithm with two deep learning classifiers, deep neural network and deep belief network, and a previously presented hidden Markov model classifier. The study showed that …

Astrobee: Air Sampling Device And Zero Robotics Game, Bryce Van Ross

STAR Program Research Presentations

Astrobee is a free-flying, 1'x1'x1' cuboid robot that is planned to be onboard the International Space Station (ISS) by February 2019. Astrobee will be the successor of the current ISS free-flyer, SPHERES. Free-flying robots possess a range of potential. They can facilitate work for astronauts aboard the ISS by performing rudimentary tasks and housekeeping (e.g., record-keeping, sensor analysis, etc.) efficiently. Free-flyers also act as innovative testbeds for guest scientists to perform zero-gravity control theory research. In recent years, SPHERES has hosted annual Zero Robotics (ZR) programming competitions in collaboration with MIT, challenging middle and high school students to write code …

Influence Of Atmospheric Clearness On Pdlc Switchable Glazing Transmission, Aritra Ghosh, Brian Norton, Tapas K. Mallick

Articles

Electrically activated switchable polymer dispersed liquid crystal (PDLC) is suitable for adaptive windows. A particular type requires 20V to become 71% transparent while in the absence of power it is 27% transparent. Glazing transmission changes with light incident angle. As the clearness of a sky changes the fraction changes alter of direct insolation (that has an azimuthally changing incident) and diffuse insolation (that has a largely constant incident). Thus, the effective overall incident angle determining the glazing transmittance also changes. In this work for the first time, the variation of PDLC glazing transmission with clearness index has been investigated.

A Constructivist Approach To The Use Of Case Studies In Teaching Engineering Ethics, Diana Adela Martin, Eddie Conlon, Brian Bowe

Articles

Our paper aims to explore the effectiveness of a constructivist approach to the teaching of engineering ethics through case studies, by putting forward a contextualization of the much discussed case study “Cutting Road Side Trees” (Pritchard, 1992) in light of the constructivist frame suggested by Jonassen (1999). First, we briefly analyse how the use of case studies for the teaching of engineering ethics eludes the complexity of the engineering professional environment before arguing that constructivism is a learning theory that can help to address this complexity. The final section proposes a constructivist reworking of the case method in a manner …

Nádúr Daonna (Natureza Humana): An Intervention To Work With Nature In The Intellectual Development Of First Year Engineering Students, Domhnall Sheridan, Michael Carr

Conference papers

For most of the 20th Century there has been a debate among psychologists, educationalists and others as to whether nature or nurture determined the personality and capabilities of the adult person. Only in the last decade has an answer been found for that perennial question: the adult is the product of both nature and nurture. The genotype, the genetic inheritance from parents provides a template, but the expression of the genotype, the phenotype, depends on the interaction between the individual and their environment. Nothing is written in stone: the young child beginning education has almost infinite possibilities. In order for …

Mens Sana: An Investigation Into The Relationship Between Psychological Traits And Academic Success Of First Year Engineering Students, Domhnall Sheridan, Michael Carr

Conference papers

In 1904, the French government asked the psychologist Alfred Binet to devise a general test of intelligence that could be used to identify pupils who were behind their age cohort, in order to give them extra help to bring their level up to that of their peers. For most of the 20th century, intelligence testing has played a major role in education, unfortunately to categorize pupils at an early stage in the life, rather than to help them. In the last two decades, much work has been done in broadening the testing of students, especially in examining the relationship between …

Rapid And Damage-Free Outgassing Of Implanted Helium From Amorphous Silicon Oxycarbide, Qing Su, Hepeng Ding, Lloyd Price, Lin Shao, Jonathan A. Hinks, Graeme Greaves, Stephen E. Donnelly, Michael J. Demkowicz, Michael Nastasi

Nebraska Center for Energy Sciences Research: Publications

Damage caused by implanted helium (He) is a major concern for material performance in future nuclear reactors. We use a combination of experiments and modeling to demonstrate that amorphous silicon oxycarbide (SiOC) is immune to He-induced damage. By contrast with other solids, where implanted He becomes immobilized in nanometer-scale precipitates, He in SiOC remains in solution and outgasses from the material via atomic-scale diffusion without damaging its free surfaces. Furthermore, the behavior of He in SiOC is not sensitive to the exact concentration of carbon and hydrogen in this material, indicating that the composition of SiOC may be tuned to …

The Link Between Spatial Skills And Engineering Problem-Solving, Gavin Duffy, Sheryl Sorby, Presentacion Rivera Reyes, Tom Delahunty, Lance Perez, Jayashri Ravishankar

Conference papers

Well-developed 3-D spatial skills are correlated with engineering success. However, most studies examining the link between spatial skills and engineering success have been conducted at the macro level, i.e., the link between spatial skills and course grades or between spatial skills and graduation rates. In this research, a more refined approach has been taken. Relationships between spatial skills and success in solving certain types of problems that engineering students commonly encounter are examined. It was found that high levels of spatial skills predict success in solving certain types of engineering problems but not in all types of problems. Data gathered …

Maritime Spatial Planning Supported By Infrastructure For Spatial Information In Europe (Inspire), Andrej Abramic, Emanuele Bigagli, Vittorio Barale, Alberto Lorenzo-Alonso, Conor Norton

Articles

The implementation of Directive 2007/2/EC - INSPIRE can improve and actually strengthen the informationmanagement and data infrastructures needed for setting up Maritime Spatial Planning (MSP) processes. Evidencefor this comes from three parallel analyses: links between the MSP Framework Directive and INSPIRE compo-nents and implementation; the availability of marine and maritime data through the INSPIRE Geo-Portal; andthe adequacy of using an INSPIRE data model for mapping maritime spatial plans. Thefirst item identifiesINSPIRE as a relevant instrument not only for data collection, but additionally for increasing transparency of theMSP processes, using already operational national and European data infrastructure. The marine/maritime dataavailability analysis …

Oil Spills Detection By Means Of Uas And Inexpensive Airborne Thermal Sensors, Ausama Al Shammari

Dissertations, Master's Theses and Master's Reports

This thesis provides an overview of oil spill scenarios and the remote sensing methods used for detection and mapping the spills. It also discusses the different kinds of thermal sensors used in oil spills detection. As UAS is becoming an important player in the oil and gas industry for the low operating costs involved, this research involved working with a cheap thermal airborne sensor mounted on DJI Phantom 4 system. Data was collected in two scenarios, first scenario is collecting data in Michigan’s Upper Peninsula at a petroleum company location and the second scenario was an indoor experiment simulating an …

Travel To Extraterrestrial Bodies Over Time: Some Exploratory Analyses Of Mission Data, Venkat Kodali, Rohith Kumar Reddy Duggirala, Richard S. Segall, Hyacinthe Aboudja, Daniel Berleant

Journal of the Arkansas Academy of Science

This paper discusses data pertaining to space missions to astronomical bodies beyond earth. The analyses provide summarizing facts and graphs obtained by mining data about (1) missions launched by all countries that go to the moon and planets, and (2) Earth satellites obtained from a Union of Concerned Scientists (UCS) dataset and lists of publically available satellite data.

Numerical Simulation Of Fault Impacts For Commercial Walk-In Freezers, Alireza Behfar, David P. Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Refrigeration systems can undergo many faults that could negatively affect their operation and performance. This paper describes a modeling process to simulate the fault impacts on the operation of a commercial walk-in freezer using semi-empirical models. These models often require less modeling effort than full forward models and could be used in scenarios where detailed information is missing, such as in field-measured systems. An important characteristic of a typical walk-in refrigeration system is the existence of a liquid-line receiver after the condenser, which significantly changes the behavior of the cycle, in comparison to a receiver-less system. Component models described in …

Solar Alignment And The Irish Passage Tomb Tradition, Frank Prendergast

Book/Book Chapter

A succinct and very useful, illustrated, explanatory guide to the phenomenon of solar alignment in the irish Passage Tomb tradition. Includes a listing of where to visit the 15 known astronomically aligned passage tombs in the 32 counties.

Written by Dr Frank Prendergast who is now Emeritus at the Dublin Institute of Technology, where he researches Irish prehistoric monuments and their landscapes from a cultural astronomy perspective. His current interests and publications are on the meaning of the dark sky in the prehistoric past and on the conservation of archaeological landscapes from light pollution.

Heritage Guides are included free with …

Application Of Machine Learning On Fracture Interference, Dennis Wayne Chamberlain Jr.

Graduate Theses, Dissertations, and Problem Reports (ETD)

A method has been developed that locates and determines well-to-well hydraulic fracture interference (frac-hit) in shale plays using hard data. This method uses Artificial Neural Networks (ANN) with designated parameters and target outputs in conjunction with graphs of gas flowrate, tubing pressure, and cumulative gas prediction. The method was created to address the significant increase in frac-hit occurrences due to the infill wells being completed in shale plays. The production data of the well is first cleaned to eliminate outliers in the initial timeframe of the well and periods of no production so that the ANN model can be accurately …

Infographic : Engineers And Athletes: Comparison Of Professions And Genders, Mckenna James, Leroy Long Iii

Publications

In this infographic, the career earnings for engineers and athletes are compared. Two separate comparisons are performed: profession and gender. In the first comparison, inventors, athletes, and superheros with the highest net worth are shown. Based on the results, inventors are making billions more than the highest paid athletes and superheroes. Even the wealthiest superheroes, Black Panther and Iron Man, earn their wealth from engineering-related technology and knowledge. In the second comparison, the salary of men and women in both athletics and engineering are displayed. Based on the results, women make significantly less than men in athletics. However, women are …

Technology Foresight: A Bibliometric Analysis To Identify Leading And Emerging Methods, Elizabeth Gibson, Tugrul U. Daim, Edwin Garces, Marina Dabic

Engineering and Technology Management Faculty Publications and Presentations

Foresight studies provide essential information used by the government, industry and academia for technology planning and knowledge expansion. They are complicated, resource-intensive, and quite expensive. The approach, methods, and techniques must be carefully identified and selected. Despite the global importance of foresight activities, there are no frameworks to help one develop and plan a proper foresight study. This paper begins Keywords: technology foresight; strategic foresight; adaptive foresight; Social Network Analysis (SNA); bibliometric tools; data mining; text mining. to close this gap by analyzing and comparing different schools of thought and updating the literature with the most current tools and methods. …

Detection Of Buried Non-Metallic (Plastic And Frp Composite) Pipes Using Gpr And Irt, Jonas Kavi

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research investigated alternative strategies for making buried non-metallic pipes (CFRP, GFRP, and PVC) easily locatable using Ground Penetrating Radar (GPR). Pipe diameters up to 12" and buried with up to 4 ft. of soil cover were investigated. The findings of this study will help address the detection problem of non-metallic pipelines and speed the adoption of composite pipes by the petroleum and natural gas industry. The research also investigated the possibility of locating buried pipes transporting hot fluids using Infrared Thermography (IRT).

Results from the study have shown that, using carbon fabric and aluminum tape overlay on non‑metallic pipes …

Simultaneous Electrical And Mechanical Resonance Drive For Large Signal Amplification Of Micro Resonators, M. H. Hasan, Fadi M. Alsaleem, N. Jaber, M. A. A. Hafiz, M. I. Younis

Durham School of Architectural Engineering and Construction: Faculty Publications

Achieving large signal-noise ratio using low levels of excitation signal is key requirement for practical applications of micro and nano electromechanical resonators. In this work, we introduce the double electromechanical resonance drive concept to achieve an order-of-magnitude dynamic signal amplification in micro resonators. The concept relies on simultaneously activating the micro-resonator mechanical and electrical resonance frequencies. We report an input voltage amplification up to 15 times for a micro-resonator when its electrical resonance is tuned to match the mechanical resonance that leads to dynamic signal amplification in air (Quality factor enhancement). Furthermore, using a multi-frequency excitation technique, input voltage and …

Impact Of Owners’ Early Decisions On Project Performance And Dispute Occurrence In Public Highway Projects, Sogand Hasanzadeh, Behzad Esmaeili, Ghada M. Gad, Douglas D. Gransberg

Durham School of Architectural Engineering and Construction: Faculty Publications

Disputes are common in the construction industry and lead to unnecessary cost and schedule overruns in projects. It is commonly believed that owners’ early decisions regarding the selection of delivery methods, procurement methods, and contract types impact the frequency and severity of project disputes; however, no previous study has empirically tested this hypothesis, particularly in highway public projects. Therefore, this study empirically investigated the impact of owners’ early decisions regarding project organization (i.e., delivery methods, procurement, and contract types) on performance measures (e.g., cost and schedule growth), specifically dispute performance metrics (e.g., frequency and severity of disputes), in public highway …

Method For Radon Measurement In Residential Sewer Connections, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Radon gas is the most deadly indoor air pollutant. In the US, it is responsible for over 20,000 deaths per year. Residential exposure is typically the largest portion of a person’s annual exposure, so a great deal of research has been done to understand the pathways that radon can follow to enter a house. Since radon emanates from the ground, it is present in high concentration in soil gas. Recent research on the vapor intrusion of volatile organic compounds from subsurface sources into a test house concluded that the sewer line is an important preferential pathway. Despite the potential for …

Utilizing Wearable Devices To Design Personal Thermal Comfort Model, Mostafa Rafaie, Mehari Tesfay, Fadi Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

have confirmed that thermal comfort significantly depends on internal personal parameters such as metabolic rate, age, and health status. This is manifested as a difference in comfort levels between people residing under the same roof, and hence no general comprehensive comfort model satisfying everyone. Current and newly emerging advancements in state of the art wearable technology have made it possible to continuously acquired biometric information. This work proposes to access and exploit this data to build personal thermal comfort model. Relying on various supervised machine-learning methods, a personal thermal comfort model will be produced and compared to a general model …