Other Engineering Commons^™

Application Of Competitive Intelligence For Insular Territories: Automatic Analysis Of Scientific And Technology Trends To Fight The Negative Effects Of Climate Change, Henri Dou, Pierre Fournie

International Journal of Islands Research

Islands are fragile territories because of their geographical position. As a result, climate impacts can have serious consequences, of which some are irreversible. Therefore, it is necessary to allow insular territories to benefit from the latest scientific and technological advances in combating climate effects. The current article shows how to deal with automatic analysis of scientific information on the one hand, but also its applications via patents. We will analyse the latest scientific results as well as their possible applications using patent analysis. We will also focus on experts, laboratories, and leading companies, that are active on the field. The …

Intracavity Phase Interferometry Based Fiber Sensors, Luke Jameson Horstman

Optical Science and Engineering ETDs

Intracavity Phase Interferometry (IPI) is a detection technique that exploits the inherent sensitivity of a laser's frequency to the parameters of its cavity. Intracavity interferometry is orders of magnitude more sensitive than its extracavity alternatives. This dissertation improves on previous free-space proof-of-concept designs. By implementing the technique in fiber optics, using optical parametric oscillation, and investigating non-Hermitian quantum mechanics and dispersion tailoring enhancement techniques, IPI has become more applicable and sensitive. Ring and linear IPI configurations were realized in this work, both operating as bidirectional fiber optical parametric oscillators. The benefit of using externally pumped synchronous optical parametric oscillation is …

Ultrafast Spectroscopy Of Air Lasing In Filaments, Brian Robert Kamer

Optical Science and Engineering ETDs

Filamentation in air is a phenomenon that has been extensively investigated for the last two decades. At sufficiently high intensity, even air is a nonlinear medium. These intensities are reached with ultrashort pulses (50 to 100 fs) of more than 1 J energy, which self-focus in air, reach ionizing intensities of oxygen and nitrogen, creating a plasma that defocuses the beam. The air filament is a self-induced waveguide resulting from a balance of focusing and defocusing. In this work new techniques were developed to visualize and analyze this phenomenon through its emission, in particu- lar the UV emission of the …

The Application Of Mathematical Optimization And Flavor-Detection Technologies For Modeling Aroma Of Hops, Yutong Liu

Department of Food Science and Technology: Dissertations, Theses, and Student Research

In recent years, proprietary hops (Citra, Simcoe, and Mosaic) become the most sought-after hops among brewers due to their excellent aroma. However, they are restricted to the owners unless other growers purchase the costly licensing agreements. Many public hops are available to the growers without any additional costs, but their aroma is difficult to match to the proprietary hops. Although proprietary and public hop varieties are unique in their aroma profiles, all hops varieties contain similar volatile compounds, merely differ in the quantity of different individual compounds. The main objective of this thesis was to investigate the feasibility of matching …

Electric Vehicle Battery Charging Infrastructure, Javan Paul Luce Tanner

Industrial Technology Master's Projects

The progression away from internal combustion engines has been slowly gaining momentum over the last ten years. This project investigated the pathway forward regarding the charging of electric vehicles. As governments have begun enacting legislative initiatives in support of a greener and more sustainable future, we are now witnessing more rapid progress toward widespread adoption of fully electric and hybrid vehicles. This study focused directly on battery electric vehicles (BEVs). Some automotive manufacturers (each with their own timeframe) have committed to producing only these BEVs, and eliminating traditional combustion engine vehicles. This investigation was designed to examine the current state …

Investigation Of Added Mass Of Heeled 2-D Sections In A Seaway Using The Patch Method In Heave, Roll, And Sway Motions, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This thesis analyzes the effects of the angle of heel and beam-to-draft ratio on the sectional added mass of primitive cross-sectional shapes in regular harmonic waves in the frequency domain using 2-D boundary element method for uncoupled heave, sway, and roll motion. This 2-D boundary element method uses the patch method developed by Söding (1993b) [4] to compute the added mass of asymmetric geometry. The angles of heel used varied from 0 to 90 degrees in 5-degree intervals, while the beam-to-draft ratios varied from B/T = 0.5 to B/T = 3.0 in half increments. Triangles, rectangles, and rectangles with rounded …

Comparisons Of Concrete Slender Wall Software With Full-Scale Experiments, Gloriana M.L. Moua

Architectural Engineering

The 1980 slender wall testing was performed by the Structural Engineers Association of Southern California (SEAOSC) in efforts to analyze behavior of concrete slender walls when lateral and eccentric axial loads are applied. The testing was done with 12 tilt-up wall panels, 3 of each of the four thicknesses: 9 ½”, 7 ¼”, 5 ¾”, and 4 ¾”. What was discovered from testing was that a fixed limitation of height to thickness ratio was not a governing factor and that each case should be analyzed based off the strength and deflection of the wall. It was because of this testing …

Properties Of Pigmented Concrete, Ahmed Samir Youssef Ezzeldin

Archived Theses and Dissertations

No abstract provided.

Two-Dimensional Steady Boussinesq Convection: Existence, Computation And Scaling, Jeremiah S. Lane, Benjamin F. Akers

Faculty Publications

This research investigates laser-induced convection through a stream function-vorticity formulation. Specifically, this paper considers a solution to the steady Boussinesq Navier–Stokes equations in two dimensions with a slip boundary condition on a finite box. A fixed-point algorithm is introduced in stream function-vorticity variables, followed by a proof of the existence of steady solutions for small laser amplitudes. From this analysis, an asymptotic relationship is demonstrated between the nondimensional fluid parameters and least upper bounds for laser amplitudes that guarantee existence, which accords with numerical results implementing the algorithm in a finite difference scheme. The findings indicate that the upper bound …

Interferometric Lithography- An Approach To Large Area And Cost Effective Nanopatterning, Vineeth Sasidharan

Optical Science and Engineering ETDs

In this dissertation interferometric lithography is approached in two different ways to address two important constraints of nanopatterning. One approach solves the problem of scaling up interferometric lithography to wafer scale (4 inch or larger) area. Through the second approach we have developed a nanopatterning technique based on interferometric lithography by using an inexpensive (~$100) diode laser as source, making interferometric lithography a very cost-effective technique.

Wafer-scale large-area nanopatterning was developed using an amplitude grating mask as a grating beam splitter along with spatial averaging of laser intensity by wobbling. The longitudinal and transverse coherence issues both are eased by …

Hydrolysis Of Rice Straw For Production Of Soluble Sugars, Mahmoud El-Wany

Archived Theses and Dissertations

No abstract provided.

Guidelines For The Application Of Recycled Concrete Aggregate In The Egyptian Construction Industry, Ahmed Mostafa Essam Aly Kamel

Archived Theses and Dissertations

No abstract provided.

Approaching Industrial And Environmental Reform For Shaq Al-Thu'ban Marble And Granite Industrial Cluster, Rania Ahmed Hamza Sayed Eid

Archived Theses and Dissertations

No abstract provided.

Flexible Pavement Design Aashto 1993 Versus Mechanistic-Empirical Pavement Design, Ashraf Ayman Aguib

Archived Theses and Dissertations

No abstract provided.

Improving Project Performance Using Lean Construction In Egypt: A Proposed Framework, Marwa Gamal Swefie

Archived Theses and Dissertations

No abstract provided.

Finite Element Dynamic Study On Large Framed Foundation Of Steam Turbine Generator, Ahmed Mounir Abou Elsaoud

Archived Theses and Dissertations

No abstract provided.

Nonlinear Numerical Modeling Of Reinforced Concrete Panels Subjected To Impact Loads, Sherif Mohamed Shaaban

Archived Theses and Dissertations

No abstract provided.

Visual Quality Integerated Cost Model For Developing Green Neighborhoods: An Optimization Apporoach, Eiman Yehia El-Banhawy

Archived Theses and Dissertations

No abstract provided.

Cashflow Decision Support System For Housing Developers Under Uncertain Buyer Behavior, Akinmoladun Olusola Peter

Archived Theses and Dissertations

No abstract provided.

Evaluation Of Current Egyptian Seismic Code Approach To Estimation Of Lateral Drift: Calibration Of Displacement Amplification Factor For Rc Ordinary Moment-Resisting-Frame Buildings, Soha Hassan Nashaat El-Kassas

Archived Theses and Dissertations

No abstract provided.

Reconfigurable Cushion Design For E-Commerce Packaging Using Kirigami Concept, Euihark Lee, Xingguang Pan, Hannah Kim, Kazuko Fuchi

Journal of Applied Packaging Research

In packaging, cushion barriers are needed to provide content protection in a disposable form. However, conventional cushioning materials and designs typically require a large volume, which decreases shipping and storage efficiency and increases environmental impact. Especially in e-commerce, where “shipping and handling” occur at an exceedingly rapid pace in large-scale operations, many packages suffer from being over or under packed through the fulfilment process. To solve this issue, this paper presents deployable kirigami-based cushion designs that can be collapsed or deployed depending on the distribution situation. Kirigami is a variation of origami that involves both cutting and folding of paper. …

Higher Sound Levels In K-12 Classrooms Correlate To Lower Math Achievement Scores, Laura Caroline Brill, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Sound levels from occupied classrooms have been gathered from 220 classrooms across four grade levels (3, 5, 8 and 11) over six school days each and processed with k-means clustering into speech and non-speech clusters. Three metrics describing the classroom acoustics, including the average daily A-weighted equivalent level for non-speech, the average daily difference between the A-weighted equivalent levels for speech and nonspeech (a signal to noise ratio), and the mid-frequency averaged reverberation time, were analyzed against classroom-aggregated standardized reading and math achievement test scores, while controlling for classroom demographics including socioeconomic status. Interactions between the metrics and demographics were …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

The Effects Of The Visual Environment On K-12 Student Achievement, Michael Kuhlenengel, Iason Konstantzos, Clarence E. Waters

Durham School of Architectural Engineering and Construction: Faculty Publications

The varying indoor environments among educational buildings can have an impact on students’ ability to learn. This study looks at field data from 220 classrooms in the Midwest, United States, over a two-year period, to analyze the effects of the visual environment on student achievement. The visual environmental metrics considered within this scope include the three new view metrics introduced within the EN 17037 “Daylight of Buildings” standard (Horizontal Sight Angle, Outside Distance of View, and Number of View Layers), as well as standard daylight and electric lighting metrics, focusing on light availability and glare. To capture student achievement, math …

3d-Printable And Open-Source Modular Smartphone Visible Spectrophotometer, Brandon Winters, Nick Banfield, Cassandra Dixon, Anna Swensen, Dakota Holman, Braxton Fillbrown

Chemistry Faculty Publications

The past four decades have brought significant and increasingly rapid changes to the world of instrument design, fabrication, and availability due to the emergence of 3D printing, open-source code and equipment, and low-cost electronics. These, along with other technological advances represent a nexus in time ripe for the wide-spread production and availability of low-cost sophisticated scientific equipment. To that end, the design of a 3D printable and open-source, modular spectrometer is described. This specific instrument is distinctly different from others that have been reported in recent years in that it was designed outside of the “black box” paradigm of …

Simulation For A Mems-Based Ctrnn Ultra-Low Power Implementation Of Human Activity Recognition, Muhammad Emad-Ud-Din, Mohammad H. Hasan, Roozbeh Jafari, Siavash Pourkamali, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an energy-efficient classification framework that performs human activity recognition (HAR). Typically, HAR classification tasks require a computational platform that includes a processor and memory along with sensors and their interfaces, all of which consume significant power. The presented framework employs microelectromechanical systems (MEMS) based Continuous Time Recurrent Neural Network (CTRNN) to performHAR tasks very efficiently. In a real physical implementation, we show that the MEMS-CTRNN nodes can perform computing while consuming power on a nano-watts scale compared to the micro-watts state-of-the-art hardware. We also confirm that this huge power reduction doesn’t come at the expense of reduced …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

A Proposal To Harmonize Bim And Iot Data Silos Using Blockchain Application, Zulkefly Abu Bakar, Malachy Mathews Dr

Conference papers

The integration of Building Information Modelling (BIM) and Internet of Things (IoT) provide significant end-to-end benefits for the architecture, engineering, construction, and operations (AECO) industry. Example applications include on-site assembly services, data localization for built environment, occupancy performance measures and many other analyses that can be used to improve the built environment. However, silos in the BIM and IoT data exchange have impacted the digital process adoption in AECO industry, which aims to change the dynamics and behaviors of the current working process. Penzes, (2018) in his report, acknowledges the AECO industry as one of the most fragmented sectors with …

Framework To Develop Time- And Voltage-Dependent Building Load Profiles Using Polynomial Load Models, Andrew Parker, Mhd Anas Alkrch, Kevin James, Ahmad Almaghrebi, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The power consumption of buildings over the course of each minute, hour, day and season plays a major role in how this load influences the Electric Power System voltage and frequency, and vice versa. This consumption is based on the building's load component types, efficiencies, and how they consume power and react to changes in real time. Due to this complexity, standard full-building load models are typically voltage-invariant. This paper proposes a novel framework to transform these voltage-invariant building load models into fully time- and voltage-dependent load profiles using available data on the voltage sensitivity of individual load components. While …