Other Engineering Commons^™

The Role Of Chinese Mining Industry In Domestic And Global Economy, Suen Li Chan, Djulibekov M.K.

Gorniy vestnik Uzbekistana

The article describes the impact of the Chinese gold industry on the world gold market and the economic growth of China for the period 2000-2020. Despite a slowing economic trend, the Chinese mining industry continues to experience growth. China produces about half of the world's steel, imports more than 70% of the world’s seaborne iron ore, and produces around 90% of the world’s rare earth metals. The paper demonstrates the importance of the Chinese mining sector and describes the key concepts of the successful government and business strategies.

Dual-Cure Benzoxazine Networks For Additive Manufacturing, Jeremy Weigand

Dissertations

The research presented addresses the design of novel materials for additive manufacturing through a dual-cure approach that combines UV initiated free-radical polymerization of an acrylic network combined with the thermally initiated ring opening polymerization of a benzoxazine network. This work is split into three primary sections: the first and second sections focus on the synthesis and characterization of networks based on dual-cure BOX monomers, while the third develops simulation tools to further investigate thermoset networks prepared via additive manufacturing. A novel 3D printing formulation based on a multifunctional benzoxazine (BOX) monomer possessing both photo and thermally polymerizable functional groups is …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Ethan Phan, Adrian Damian, Kevin Le, Mary Johnson, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective high-density sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

The Problem-Solving Workshop: Adapting Process Improvement Methodologies For K-12 Educators, Madison Chan

Honors Theses

Lean and Six Sigma have been lauded in the manufacturing sector for their ability to streamline processes, reduce waste, minimize variation and defects, and improve the bottom line. Although these methodologies have begun to spread to other industries, their impact has been relegated to certain areas and has largely missed others. One area that bears strong consideration is education. Education is heavily process-based and notoriously tight on resources. It is hypothesized that if educators were taught the basics of these strategies and were able to implement them in the classroom setting, the effectiveness of both teaching strategies and classroom operations …

Towards Gross-Pitaevskiian Description Of Solar System & Galaxies, Florentin Smarandache, Victor Christianto, Yunita Umniyati

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper, we argue that Gross-Pitaevskii model can be a more complete description of both solar system and spiral galaxies, especially taking into account the nature of chirality and vortices in galaxies. We also hope to bring out some correspondence among existing models, e.g., the topological vortex approach, Burgers equation in the light of KAM theory, and the Cantorian Navier-Stokes approach. We hope further investigation can be done around this line of approach.

Ten Questions Concerning Well-Being In The Built Environment, Sergio Altomonte, Joseph Allen, Philomena M. Bluyssen, Gail Brager, Lisa Heschong, Angela Loder, Stefano Schiavon, Jennifer A. Veitch, Lily M. Wang, Pawel Wargocki

Durham School of Architectural Engineering and Construction: Faculty Publications

Well-being in the built environment is a topic that features frequently in building standards and certification schemes, in scholarly articles and in the general press. However, despite this surge in attention, there are still many questions on how to effectively design, measure, and nurture well-being in the built environment. Bringing together experts from academia and the building industry, this paper aims to demonstrate that the promotion of well-being requires a departure from conventional agendas. The ten questions and answers have been arranged to offer a range of perspectives on the principles and strategies that can better sustain the consideration of …

Controller And Headset Stand: Designing And Manufacturing, Tyler Butler, Chad Gutierrez

Honors Theses

This report shows how our Senior Center for Manufacturing Excellence team took our product, a controller and headset stand, from an idea into a mass producible product. We first identified the problem of headphones and controller storage and sought to solve it through our product design. Market research was performed to ensure that this would be a successful product in today’s marketplace. The trials of prototypes demonstrated what features could and could not be implemented into the design of the product. The group then designed a manufacturing plan for the product and found the projected market for the product. This …

Applications Of The Negatively-Charged Silicon Vacancy Color Center In Diamond, Forrest A. Hubert

Optical Science and Engineering ETDs

The spatial resolution and fluorescence signal amplitude in stimulated emission depletion (STED) microscopy is limited by the photostability of available fluorophores. Here, we show that negatively-charged silicon vacancy (SiV) centers in diamond are promising fluorophores for STED microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. A home-built pulsed STED microscope was used to image shallow implanted SiV centers in bulk diamond at room temperature. We performed STED microscopy on isolated SiV centers and observed a lateral full-width-at-half-maximum spot size of 89 ± 2 nm, limited by the low available STED laser pulse energy (0.4 nJ). For a …

Understanding Individual Color Perceptions Within Print And Digital Media, Morgan Haskins

Honors Theses

Color is a subjective attribute that is seen differently by each individual and this research is intended to build upon the subjective nature of color perceptions. This research aims to determine the effect of subjectivity on print and digital design and of extended gamut printing and effective color management on color perception. The significance of understanding color perception is directly applicable to consumer perception of designs using color. If designers want their brand to be immediately recognized and be positively accepted, they must be able to accurately reproduce their brand colors with little to no color difference and be able …

Mid-Ir Optical Refrigeration And Radiation Balanced Lasers, Saeid Rostami

Optical Science and Engineering ETDs

This dissertation reports recent advances in mid-infrared (mid-IR) optical refrigeration and Radiation Balanced Lasers (RBLs). The first demonstration of optical refrigeration in Ho:YLF and Tm:YLF crystals as promising mid-IR laser cooling candidates is reported. Room temperature laser cooling efficiency of Tm- and Ho-doped crystals at different excitation polarization is measured and their external quantum efficiency and background absorption are extracted. Complete characterization of laser cooling samples is obtained via performing detailed low-temperature spectroscopic analysis, and their minimum achievable temperature as well as conditions to achieve laser cooling efficiency enhancement in mid-IR are investigated. By developing a Thulium-doped fiber amplifier, seeded …

Development Of A Flexible Printed Paper-Based Battery, Justone Crosby

Honors Theses

Market demand for flexible electronics continues to grow, which, in turn, increases the demand for flexible energy storage devices. There are several types of energy storage devices available, including the alkaline (Zn-MnO₂) battery, which is the subject of this project. This project's objective was to develop a flexible, printed paper-based battery, which may be a sustainable solution to the increasing market demand. This device is low-cost and can be manufactured commercially using a scalable process.

The proposed device is an alkaline flexible cell, whose components can be printed onto paper. This alkaline system includes a zinc-based negative electrode …

Comparison Of Pretreatment Methods For Cellulosic Ethanol, Michael Eaton

Honors Theses

Bioethanol provides a great alternative to regular ethanol sources because it uses secondary substrates that are byproducts of other industries, rather than substrates that compete with food products. The technology is available for industrial bioethanol production, but the production costs just aren’t competitive enough with traditional ethanol production. The goal of this project was not to prepare a proposal for a bio-ethanol plant with all of the associated costs and financial calculations, but rather to provide a direct comparison of two pretreatment methods to highlight which factors could make one method less costly than the other. Pretreatment is a critical …

Paper Recycling Fiber Recapture, Abigail Cortright

Honors Theses

The goal of the Yoda Chemical Company Paper Recycling Fiber Recapture project and subsequent report was to identify and recommend plant optimization opportunities associated with the potential recovery of five waste streams. Additionally, an analysis of the upgrade’s design was completed in order to determine the economic viability of fiber recapture. Beginning the analysis, the five waste streams were identified and analyzed. The waste streams include the top liner, back liner, and filler liner primary cleaner rejects on the K1 machine, the common rejects from under the K3 paper machine, and the tertiary cleaner rejects from stock preparation.

Two different …

A Data-Driven Model For Multiphase Flow In Pipes, Francisco Bruno Xavier Teles

LSU Master's Theses

Steady-state models commonly used to determine pressure gradient in wells are either empirical correlations or are dependent on empirical parameters correlated to specific flow conditions such as pressures, temperatures, fluid types, and pipe inclinations. The empirical nature of these models leads to limitations in predicting cases in a wide range of conditions. Established models may be delivering inaccurate results when applied at conditions beyond those which they were derived from. For instance, models available in the literature have shown to have limitations when used in large diameter pipes and high-velocity scenarios.

This work aims to evaluate different flow models with …

Studies Of Oval Tube And Fin Heat Exchangers, Phillip Nielsen

Discovery Day - Prescott

Heating Ventilation and air-conditioning (HVAC) is a system which changes the temperature of the surroundings for the purposes of cooling or heating. This system requires energy to maintain a temperature difference from the outside temperature. This is important since minimized power is one of the requirements for the system to achieve a better efficiency. Optimizing the flow over the evaporator coils is one way to increase the cooling efficiency. This will reduce the power required to have a sustainable system. Optimizing the flow to increase the energy transfer between the fins and the incoming air could result in a greater …

Tech Comm Eagle Eye-Tracking Control System, Gabiella Lail, Robert Shaw, Hunter Smatla, Matthew Gary

Discovery Day - Prescott

Mobile eye-tracking systems provide usability research support as well as access to a wide range of robotics and technical communication research opportunities. Optical tracking systems are often prohibitively expensive and do not provide the mobility or flexibility needed for a variety of research application possibilities. Our team proposes building a simple mobile eye-tracking system to be used in-house at ERAU for heat-mapping, robotics, control systems, and various technical communication applications in a structured research environment. The mobile eyetracking system will become part of a larger research and hands-on technical communication usability lab and research center. The research team intends to …

An Investigation Of Nasa Affordability Culture: Concepts And Methods, Christopher J. White, Cassandra Martin

Research Horizons Day Posters

No abstract provided.

Past, Present, And Future Of Priced Managed Lanes, Ganapathi Badireddi, Ron Davis

Purdue Road School

Using various maps and graphs, this presentation will detail the significant growth in the U.S. priced managed lane sector in terms of mileage, locations, and toll revenue. The location of priced managed lanes currently under construction will also be included to show anticipated growth over the next several years. Some emerging trends and considerations for the future will be discussed based on involve-ment in recent studies of priced managed lanes around the country.

Microwave Treatment Of A Refractory Gold Concentrate, K. Sanakulov, Omon Fuzaylov, J.A. Kenbaeva

Gorniy vestnik Uzbekistana

The article presents the results of microwave processing of gold-containing sulfidic carbonaceous flotation concentrate, with the aim to oxidize sulfide minerals and organic carbon, in which gold is associated. The flotation concentrate was processed in a microwave oven with an output power of 700 W, so that after every 2 minutes of treatment the magnetron was turned off, the sample was mixed, then turned on. The degree of removal of sulfide sulfur was 96%. Organic carbon is removed by 76.7%. The IR spectra of the initial flotation concentrate and microwave treatment product are given, as well as the results of …

Forced Large Load Loads By Conveyor Belt, A.Yu. Zakharov, N.V. Erofeeva

Gorniy vestnik Uzbekistana

The authors proposed the isolation of a large piece from the conveyor belt with a layer of small particles of bulk cargo to reduce dynamic loads. They suggest installing a device for forced segregation of bulk cargo under a loaded belt. The authors developed a mathematical model for the behavior of a large piece on a conveyor belt.

Anodic Dissolution Of Alloy Ak12m2 Doped By Antimony In Aqueous Solutions Of Sodium Chloride, H.M. Nazarov, Okil Osimi

Gorniy vestnik Uzbekistana

The results of the study on the effect of antimony alloy anodic behavior AK12M2 alloy, in a neutral environment (at different concentrations - 0.03; 0.3 and 3.0% NaCl). It should be noted that in all cases, the corrosion potential of samples immersin into a solution after some time shifts in the positive direction and then stabilized. In this case, if the stabilization in undoped alloy corrosion potential is observed within 50 minutes, then in doped alloys it occurs twice as fast, within 25-30 minutes, indicating a relatively higher influence of antimony passivation additives.

Superhydrophobes In The Way Of Warning For The Free On The Forecast, M.P. Baranova, A.I. Karshibаev, F. N. Rakhmonov, A.A. Hamidov

Gorniy vestnik Uzbekistana

This article discusses the option of using superhydrophobic coating as a method of combating the formation of ice on the wires of high voltage power lines. Super- hydrophobic coating, a coating whose main property is the repulsion of liquids. A similar effect in nature is called the Lotus effect. The principle of this property is based on the use of special substances that contribute to the creation of a nano relief on the surface of the object to be coated, which counteracts adhesion. Application of a protective layer to the surface is one of the methods to ensure a long …

Prospects For The Development Of Mortgage Works In Underground Mines, T.U. Khudoyarov, I.Yu Sodiko

Gorniy vestnik Uzbekistana

This article presents analyzes of international experience in the application of laying works and their prospects in the development of deposits with a complex geome- chanical situation. Various options for the composition of the filling mixture are also considered.

Engaging First Year Students With Intellectual Property, Marian G. Armour-Gemmen

Faculty & Staff Scholarship

Since intellectual property is so important to engineers, creating enthusiasm from the beginning of their engineering studies is imperative. Since first year students have not learned how to apply technological concepts to real life, demonstrating intellectual property could be a challenge. To engage first year engineering students in the concept and the value of intellectual property, students were introduced to basic concepts and applications. Different concepts were applied to real life examples allowing them to interface with technology from an intellectual property perspective. This paper highlights not only patents, but also trademarks and trade secrets.

New Stanford Hospital, Fpe 2020 Student

Fire Protection Engineering: Culminating Experience Project Reports

This report is the compiled culminating project for the Fire Protection Engineering Master’s Program at Cal Poly, SLO. Addressed herein is the fire protection and life safety approach for the New Stanford Hospital in Palo Alto, California in accordance with the 2012 NFPA 101 – Life Safety Code and the 2016 California Building and Fire Codes. This includes review of building occupancies, construction type, fire-resistive ratings, means of egress, and fire protection systems. The objective of this report is to review the impact of major fire scenarios on life, property, and operations.

The New Stanford Hospital is a Type IA …

Dynamic Procedural Music Generation From Npc Attributes, Megan E. Washburn

Master's Theses

Procedural content generation for video games (PCGG) has seen a steep increase in the past decade, aiming to foster emergent gameplay as well as to address the challenge of producing large amounts of engaging content quickly. Most work in PCGG has been focused on generating art and assets such as levels, textures, and models, or on narrative design to generate storylines and progression paths. Given the difficulty of generating harmonically pleasing and interesting music, procedural music generation for games (PMGG) has not seen as much attention during this time.

Music in video games is essential for establishing developers' intended mood …

Mass Spectrometric Calibration For Real -Time Hydrocarbon Detection, Makuachukwu Mbaegbu

LSU Master's Theses

Determining gas compositions from live well fluids on a drilling rig is critical for real time formation evaluation. However, development and utilization of a reliable mass spectrometric method to accurately characterize these live well fluids is always a challenging issue because of lack of a robust, quick and effectively selective instrument and method. The primary goal of this research is to understand reasons of such discrepancies in results between “good” spectra, and “poor” ones. The objectives are thus to identify the detection issues, calibrate and QA/QC the instruments, and analyze the results in lab settings. In this study, we used …

Millimetre-Wave Planar Bruce Array Antenna, Zeeshan Ahmed, Manh Ha Hoang, Patrick Mcevoy, Max Ammann

Conference papers

A tri-band mm-wave planar Bruce array antenna for fifth generation communications (5G) is presented. The 16-element planar Bruce array antenna is simulated and fabricated on Rogers RT/Duroid 5880 substrate with thickness of 0.254 mm. For a compact and simple structure, the antenna has a highly directional fan-beam radiation pattern at broadside and peak realized gain of 14.0 dBi.

Human-Machine Communication: Complete Volume. Volume 1

Human-Machine Communication

This is the complete volume of HMC Volume 1.

Toward An Agent-Agnostic Transmission Model: Synthesizing Anthropocentric And Technocentric Paradigms In Communication, Jaime Banks, Maartje M. A. De Graaf

Human-Machine Communication

Technological and social evolutions have prompted operational, phenomenological, and ontological shifts in communication processes. These shifts, we argue, trigger the need to regard human and machine roles in communication processes in a more egalitarian fashion. Integrating anthropocentric and technocentric perspectives on communication, we propose an agent-agnostic framework for human-machine communication. This framework rejects exclusive assignment of communicative roles (sender, message, channel, receiver) to traditionally held agents and instead focuses on evaluating agents according to their functions as a means for considering what roles are held in communication processes. As a first step in advancing this agent-agnostic perspective, this theoretical paper …