Other Engineering Commons^™

Physicochemical Analysis Of Carbon-Containing Materials Obtained From Vulcanized Rubber Waste And Their Application As Filler Pigments, N.S. Baxranova, Sh.T. Jurayev, D.R. Muminova, Jurayev Shohruh Tulqinovich

Chemical Technology, Control and Management

The article presents the results of chemical and scanning electron microscopic analyses of the solid fraction of carbon-containing materials obtained through thermo-oxidative pyrolysis of vulcanized rubber waste. Elemental analysis of the solid product formed during high-temperature pyrolysis of rubber-technical products at 650–700 °C is provided. In addition, the potential use of the carbonaceous material as a pigment is examined. Raman spectroscopic analysis of worn automobile tires showed that their composition consists of approximately 80 wt.% C, 7 wt.% H, 0.4 wt.% N, 1.5 wt.% S, 3 wt.% O, and 8 wt.% inorganic substances.

Generative Ai: Another Chapter Of Human-Machine Communication, Seungahn Nah, Patric R. Spence

Human-Machine Communication

This editorial introduces a special issue of Human-Machine Communication that explores how generative AI reshapes the communicative relationship between humans and machines. It highlights emerging research on technology use, education, interpersonal dynamics, and trust in AI-generated content, emphasizing that generative AI’s significance lies not in novelty but in the social negotiations it provokes around meaning, authority, and credibility.

Investigation Of Topography Changes Of Blasted Surfaces: An Experimental Perspective Using Fiducial Markers, Stefanie Stoeckel, Sophie Groeger

15th International Conference on Shot Peening

Abrasive blasting is a process that intentionally modifies surface topography to meet specific functional requirements. The blast media is accelerated and interacts directly with the surface through impact. It is evident that the number of impacts and the overlap increase with time. This study aims to investigate these alterations to surface topography through repeated examinations of the same location. A methodology has been developed that employs the use of fiducial markers, which are protected during blasting by a custom 3D-printed cover. This method was used to observe changes in the topography of smooth and rough initial surfaces that had been …

Computational Studies On The Major Antioxidant Enzymes Of Wuchereria Bancrofti Towards The Development Of Anti Filarial Leads, Sureshan M

Theses and Dissertations

Lymphatic filariasis (LF), or elephantiasis, is a mosquito-borne parasitic disease affecting the lymphatic system, primarily in tropical and subtropical regions. It is the second leading cause of long-term disability and a neglected tropical disease. According to WHO, LF threatens 882 million people in 44 countries, with over 9 billion treatments administered. The disease is caused by three nematodes: Wuchereria bancrofti (90% of cases worldwide, including India), Brugia malayi (10% in Southeast and Eastern Asia), and Brugia timori (found in Timor and nearby islands). Lymphatic filariasis (LF) is an ancient disease that continues to challenge scientists and physicians. Current treatments include …

Artificial Intelligence-Based Adaptive Data-Driven Techniques For Disruption Prediction In Tokamak, Priyanka M

Theses and Dissertations

Tokamaks are nuclear fusion reactors designed to generate sustainable energy by confining plasma, yet plasma disruptions remain a major obstacle as they can damage reactor components and interrupt fusion reactions. Addressing this challenge requires reliable models that can classify plasma discharges and predict disruptions in advance. This thesis develops machine learning and deep learning approaches to improve both classification and forecasting.The first contribution is a semi-supervised active learning framework, Nearest Margin-Ranked Batch Mode Active Learning (NM-RBMAL), integrated with an ensemble model.

Unlike traditional classifiers that operate on static training data, this approach continuously adapts to new plasma conditions, reducing model …

Bioprospecting Of Wheat Straw Pyrolysis Aqueous Phase To Combat Multi-Drug Resistant Pathogens, Srividhya K

Theses and Dissertations

Hospital-acquired infections (HAIs) significantly contribute to the emergence and spread of antimicrobial resistance (AMR), primarily through the contamination of high-touch surfaces. Current disinfectants have drawbacks like high environmental persistence, ecotoxicity, and resistance development, prompting the need for environmentally friendly alternatives.

One potential approach is pyrolysis, during which the biomass components are broken down into solid, liquid, and pyro-gas. The aqueous phase of the liquid fraction is usually discarded as waste, but it contains a variety of organic compounds that have the potential for antibacterial and antifungal activity. The present study assessed the anti-infective and anti-biofilm properties of wheat straw pyrolysis …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto

Journal of Materials Exploration and Findings

This review studying the correlation between microstructural transformations and mechanical properties in reconditioned low-allow steel material, focusing on the impact of Submerged Arc Welding (SAW) parameters, especially current, on microstructure . The study highlights how variation on welding parameters, especially current intensity variation, affecting microstructural transformations, hardness, and wear resistance of hardfaced layers. Key aspects such as dilution effect, phases distribution, and carbide formation are reviewed to understanding their impact on mechanical properties. By reviewing insights from existing literature and experimental findings, this review underscores the role of Submerged Arc Welding in enhancing mechanical properties and microstructural of low-alloy steel …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Comparative Analysis Of Codes Of Ethical Conduct And Professionalism In Engineering And Project Management Associations, Valarie Denney, James W. Marion

Publications

This research details the similarities and differences in moral values and perspective from 15 engineering and project management association codes of conduct and professionalism. The methodology uses text mining of selected codes counting and summarizing keywords, evaluating document similarities through cosine similarity, and assessing the influence of various ethical schools of thought. Key findings reveal differences in the emphasis of core ethical values like fairness, honesty, and responsibility across different associations. This research is important for engineering and project management professionals to purposefully develop and evolve codes of ethics and professional development to enhance integrity, accountability, and ethical decision-making.

Assembly Of Non-Close-Packed Poly(N-Isopropylacrylamide) Microgels On Metal Halide Perovskite Films, Amal Alruwaili, Osama M. Alkhudhari, Ran Wang, Zhenyu Jia, Jennifer M. Saunders, Eugenio Picheo, Daniel T.W. Toolan, L. Andrew Lyon, Brian R. Saunders

Engineering Faculty Articles and Research

Hypothesis

Experiments

Volumetric Imaging Of Cellular Dynamics Using Light-Sheet Microscopy: From Subcellular Structures To Whole Organisms, Md Nasful Huda Prince

Optical Science and Engineering ETDs

Advancing biomedical imaging requires platforms that combine high-resolution, speed, and stability across biological scales. This dissertation presents three innovations designed to address limitations of conventional light-sheet and oblique plane imaging. First, we introduce Reflected Inline Detection in Epi-Oblique Plane Microscopy (RIDE-OPM), a compact and drift-resistant system that eliminates a tertiary detection path while maintaining alignment flexibility, enabling robust long-term live imaging. Second, we present a high-speed Axially Swept Light-Sheet Microscopy (ASLM) platform for cleared tissues, using dual foci and synchronized sweeping to achieve isotropic sub-micron resolution at up to 40 frames-per-second, a fourfold improvement over standard ASLM. Integrated with a …

Enhanced Point Cloud Generation From A Novel 360° Underwater Lidar, Olagoke E. Daramola

Dissertations

This dissertation presents novel algorithms to improve the mapping capabilities of a 360-degree underwater Pulsed Laser Line Scanner LiDAR (PLLS-360°). Due to its 360° field-of-view (FOV), the PLLS-360° is a compact full-waveform omnidirectional imager suitable for seafloor mapping, underwater asset inspection, object detection, ice-sheet mapping, and construction progress monitoring. The proposed methodology includes an improved waveform fitting technique for saturated waveform recovery, detection array response correction, radiometric corrections, and fusion of LiDAR and sonar bathymetric datasets. The first part of this dissertation assesses the LiDAR’s performance and describes how the data for this unique 360° FOV architecture is processed. The …

Crevice Corrosion Mechanisms Of Cocrmo Alloys In Orthopedic Implants: Retrieval Analysis, Nano-Tribocorrosion And Cellular Responses, Hwaran Lee

All Dissertations

Mechanically assisted corrosion and non-mechanically (chemically) driven corrosion in modular junctions of orthopedic implants using cobalt-chromium-molybdenum (CoCrMo) alloys remain clinical concerns and may contribute to implant failure. The underlying corrosion mechanisms are not yet fully understood, leaving a critical research gap. We hypothesized that corrosion in modular junctions may be driven by aggressive local environments, including fretting, metal ion release (cobalt ion, Co²⁺), low pH and reactive oxygen species (ROS). This dissertation aims to (1) analyze corrosion modes and potential causes in modular junctions; (2) identify chemically driven corrosion modes on CoCrMo alloys using simulated inflammatory modular taper …

Phase Nanoscopy With Correlated Frequency Combs, Xiaobing Zhu

Optical Science and Engineering ETDs

In this dissertation a sensing method applying to any physical quantity that modifies optical phase is developed. Two pulses are produced inside a synchronously pumped Optical Parametric Oscillator, generating two identical, undistinguishable frequency combs. The physical quantity to be measured applies a small phase shift/round trip to one of the pulses, resulting in a frequency shift of the corresponding comb. The latter frequency is measured as a beat by interfering the two combs on a detector. A world record resolution, close to the quantum limit, of 0.033 nanoradian (corresponding to 0.006 fm in displacement) is achieved. A detailed analysis of …

Design & Development Of Efficient Biometric Authentication And Key Agreement Schemes For Wireless Body Area Network, Aarthi S

Theses and Dissertations

Wireless Body Area Networks (WBANs) play a vital role in continuous health monitoring, where sensitive biometric and physiological data must be protected from privacy breaches and emerging quantum-based threats. Conventional security mechanisms are often inadequate due to resource constraints, scalability issues, and vulnerability to advanced attacks. To address these challenges, this research proposes a lightweight, scalable, and future-proof security framework tailored for WBAN applications, focusing on secure communication, privacy preservation, and quantum resilience.

An anonymous Certificate-Based Signcryption–Mutual Authentication and Key Agreement (CBS-MAKE) protocol is introduced to secure extra-body communications while ensuring patient anonymity. The protocol integrates Elliptic Curve Cryptography with …

Mission Engineering Competencies Workshop Report: Roles, Responsibilities, And Skills, James D. Moreland, Jr. (Editor), Thomas Irwin, Robert-Allen Baker

Center for Mission Engineering (CME) Publications

This report summarizes the findings of a two-day Old Dominion University Mission Engineering Workshop involving the U.S. Navy, U.S. Marine Corps, U.S. Air Force, National Aeronautics and Space Administration, the University of New South Wales, and Old Dominion University, focused on defining the roles, competencies, and skills essential to Mission Engineering. It presents a structured competency framework and offers recommendations to guide workforce development, training, and cross-agency collaboration in support of complex, mission-driven systems.

Mecanismos De Participación En Temas Ambientales En Colombia, Martha Rocío Castro Rodríguez, Felipe Ramírez Cortázar, Sara Milena Niño Montero

Ciencias Agropecuarias

Mecanismos de participación en temas ambientales en Colombia es un producto editorial, de divulgación y apropiación social del conocimiento, desarrollado en el proyecto de investigación “Participación política en ciudades de Colombia, Italia y Guatemala: un estudio mixto sobre su relación con la anomia y la autoeficacia política en jóvenes”, en el marco de la V convocatoria interna - periodo 2023-1 UCundinamarca Generación Siglo 21.

Development Of Biodegradable Mg-1zn-0.5sc Alloy & Surface Treatment Through Laser Shock Peening And Evaluation Of Microstructure & Property Correlation For Orthopedic Implants, Parameshwari R

Theses and Dissertations

Magnesium (Mg) and its alloys are of much interest as promising third-generation bio-materials for bone implant applications; however, challenges remain for the alloy's mechanical integrity and bio-corrosion behaviour. Therefore, appropriate alloying elements and surface-modification techniques are required to overcome these limitations. Zinc (Zn) and Scandium (Sc) elements were found to have good biocompatibility and biodegradability; hence, they were selected as suitable alloying elements for magnesium.

This research work aims to enhance the mechanical integrity and bio-corrosion resistance behaviour of a novel Mg-1wt% Zn-0.5wt% Sc cast alloy by laser shock peening surface treatment with multiple passes (LSP-2 Pass and LSP-3 Pass). …

Lab Building With Atrium, Reagan Lawson

Fire Protection Engineering: Culminating Experience Project Reports

This report includes a prescriptive and performance-based analysis on a university life sciences building hereafter referred to as “Lab Building”. The code-based analysis includes the review of the following components: Occupancy classification and construction type, Egress, Control areas, Structural fire protection, Fire alarm and fire sprinkler systems, and Smoke control.

The Lab Building is of type IB construction and is four stories above grade with one story below grade. The building uses a non-separated mixed occupancy approach with Group A- 3 bring the most restrictive occupancy classification. Additionally, the building is fully sprinklered with a fire alarm and emergency voice …

Underground Lrt Station- Final Project, Itay Mesika

Fire Protection Engineering: Culminating Experience Project Reports

This project presents a comprehensive fire protection analysis for an underground light rail transit (LRT) station that also serves as a civil defense shelter. The station comprises two underground levels with a total area of 4,500 square meters and is designed to accommodate up to 1,470 passengers during peak hours.

Design Approach: The project adopts a hybrid approach combining prescriptive and performance-based design in accordance with NFPA 130 standards. This methodology ensures compliance with baseline requirements while enabling optimization for the facility's unique dual function as both a transportation hub and civil defense shelter.

Key Fire Protection Systems: The station …

Fire Protection And Life Safety Analysis Report, Ayoung Yun

Fire Protection Engineering: Culminating Experience Project Reports

This report evaluates the fire and life safety performance of the proposed building, a two- story, mixed-occupancy facility designed to serve as a civic and cultural hub. The analysis was prepared to assess compliance with the 2021 International Building Code (IBC), NFPA 13, NFPA 72, and related standards, with a particular focus on areas where occupant egress paths challenge prescriptive limitations. The project includes assembly, business, and storage occupancies, and features a large auditorium, classrooms, an exhibition hall, a restaurant, offices, and a double-height atrium. The building is designed as a non-separated mixed-use facility and is classified under Groups A-1, …

Fire Safety Design For Los Angeles County Fire Station 171, Ryan Murrieta

Fire Protection Engineering: Culminating Experience Project Reports

This report provides a fire safety analysis for Los Angeles County Fire Station 171. To accomplish this, the fire station is analyzed using both a prescriptive and performance-based design approach. With this in mind, the report will show areas where Fire Station 171 is in compliance with codes and standards outlined in the International Building Code (IBC) and the National Fire Protection Agency (NFPA). This report will also recommend improvements for the fire station in areas where the building is not up to current standards and codes.

Fire Station 171 is a two-story Type IIA construction fire station that also …

Ymca Building, Tomas Lins

Fire Protection Engineering: Culminating Experience Project Reports

This project consists of the prescriptive and performance-based analysis of the fire protection and life safety features of the YMCA building in the city of Grants Pass, OR. The building was opened to the public in 1983 and was expanded in 2003. The initial construction is classified as Type IV and is not protected by a sprinkler system. The expanded section has a construction classification of Type II-B and is fully sprinklered. The main occupancies found in the building are Groups A and B. The building includes daycare room classified as Group E. The four core areas of prescriptive analysis …

Underground Lrt Station, Revital Mesika

Fire Protection Engineering: Culminating Experience Project Reports

This report presents a comprehensive fire safety and evacuation systems analysis for the underground light rail terminal station project. The station features two main levels— concourse and platform—and is strategically located adjacent to a sports stadium.

Station Overview: The underground light rail terminal station is a two-level facility strategically positioned adjacent to a major sports stadium. The station operates as a critical transportation hub with distinct functional zones designed for efficient passenger flow and emergency evacuation:

Concourse Level (3.5 meters below ground): Functions as the primary passenger processing and circulation hub. This level serves as the main entry control point …

Genesis Station Fire Protection And Life Safety Analysis, Mark Anthony Bautista

Fire Protection Engineering: Culminating Experience Project Reports

This fire protection and life safety analysis evaluates GENESIS Station, a nine-story Type I-B mixed-tenant building located in Daly City, California. The facility includes business, research laboratory, and assembly occupancies. A combination of prescriptive code compliance and performance-based analysis was applied to assess the building’s overall fire safety strategy.

The building utilizes a layered fire protection strategy that combines passive fire resistive construction with active systems. Fire rated construction separate tenant suites, limiting the spread of fire and smoke, defining hazardous materials control areas, and ensuring compliant separation of egress paths.

Active fire protection systems include a fully automatic sprinkler …

Srs Training Facility, Brandon Romero

Fire Protection Engineering: Culminating Experience Project Reports

This report presents a comprehensive fire protection and life safety analysis of the Savannah River Site (SRS) Training Center. A detailed prescriptive code analysis confirmed the building's compliance with applicable standards regarding construction features, occupancy classification, and fire-rated assemblies. Fire resistance provisions are met, with key areas such as exits, stairwells, and the records storage room. The building’s layout, height, number of stories, and floor area also comply with the allowable limits established by the IBC. Fire protection systems include a proprietary fire alarm system with voice notification, extensive smoke and heat detection coverage, and a wet-pipe sprinkler system designed …

Automated Client Dashboard For Facts Student Information System, Kashish Syed

Honors Program: Senior Projects (Public)

This project addresses the challenges of student data migration for K-12 educational institutions to the FACTS Student Information System (SIS). Historically, data migration from legacy platforms has been a manual and error-prone process. To streamline this workflow, an interactive client dashboard and automated validation system were developed as part of this capstone. The resulting solution is a scalable, intuitive tool that enhances data accuracy, reduces manual labor, and improves the user experience for both school administrators and FACTS staff. This report blends the technical implementation with reflections on project management, team collaboration, and lessons learned, offering a comprehensive view of …