Other Engineering Commons^™

Properties Of Pigmented Concrete, Ahmed Samir Youssef Ezzeldin

Archived Theses and Dissertations

No abstract provided.

Two-Dimensional Steady Boussinesq Convection: Existence, Computation And Scaling, Jeremiah S. Lane, Benjamin F. Akers

Faculty Publications

This research investigates laser-induced convection through a stream function-vorticity formulation. Specifically, this paper considers a solution to the steady Boussinesq Navier–Stokes equations in two dimensions with a slip boundary condition on a finite box. A fixed-point algorithm is introduced in stream function-vorticity variables, followed by a proof of the existence of steady solutions for small laser amplitudes. From this analysis, an asymptotic relationship is demonstrated between the nondimensional fluid parameters and least upper bounds for laser amplitudes that guarantee existence, which accords with numerical results implementing the algorithm in a finite difference scheme. The findings indicate that the upper bound …

Interferometric Lithography- An Approach To Large Area And Cost Effective Nanopatterning, Vineeth Sasidharan

Optical Science and Engineering ETDs

In this dissertation interferometric lithography is approached in two different ways to address two important constraints of nanopatterning. One approach solves the problem of scaling up interferometric lithography to wafer scale (4 inch or larger) area. Through the second approach we have developed a nanopatterning technique based on interferometric lithography by using an inexpensive (~$100) diode laser as source, making interferometric lithography a very cost-effective technique.

Wafer-scale large-area nanopatterning was developed using an amplitude grating mask as a grating beam splitter along with spatial averaging of laser intensity by wobbling. The longitudinal and transverse coherence issues both are eased by …

Hydrolysis Of Rice Straw For Production Of Soluble Sugars, Mahmoud El-Wany

Archived Theses and Dissertations

No abstract provided.

Guidelines For The Application Of Recycled Concrete Aggregate In The Egyptian Construction Industry, Ahmed Mostafa Essam Aly Kamel

Archived Theses and Dissertations

No abstract provided.

Approaching Industrial And Environmental Reform For Shaq Al-Thu'ban Marble And Granite Industrial Cluster, Rania Ahmed Hamza Sayed Eid

Archived Theses and Dissertations

No abstract provided.

Flexible Pavement Design Aashto 1993 Versus Mechanistic-Empirical Pavement Design, Ashraf Ayman Aguib

Archived Theses and Dissertations

No abstract provided.

Improving Project Performance Using Lean Construction In Egypt: A Proposed Framework, Marwa Gamal Swefie

Archived Theses and Dissertations

No abstract provided.

Finite Element Dynamic Study On Large Framed Foundation Of Steam Turbine Generator, Ahmed Mounir Abou Elsaoud

Archived Theses and Dissertations

No abstract provided.

Nonlinear Numerical Modeling Of Reinforced Concrete Panels Subjected To Impact Loads, Sherif Mohamed Shaaban

Archived Theses and Dissertations

No abstract provided.

Visual Quality Integerated Cost Model For Developing Green Neighborhoods: An Optimization Apporoach, Eiman Yehia El-Banhawy

Archived Theses and Dissertations

No abstract provided.

Cashflow Decision Support System For Housing Developers Under Uncertain Buyer Behavior, Akinmoladun Olusola Peter

Archived Theses and Dissertations

No abstract provided.

Evaluation Of Current Egyptian Seismic Code Approach To Estimation Of Lateral Drift: Calibration Of Displacement Amplification Factor For Rc Ordinary Moment-Resisting-Frame Buildings, Soha Hassan Nashaat El-Kassas

Archived Theses and Dissertations

No abstract provided.

Reconfigurable Cushion Design For E-Commerce Packaging Using Kirigami Concept, Euihark Lee, Xingguang Pan, Hannah Kim, Kazuko Fuchi

Journal of Applied Packaging Research

In packaging, cushion barriers are needed to provide content protection in a disposable form. However, conventional cushioning materials and designs typically require a large volume, which decreases shipping and storage efficiency and increases environmental impact. Especially in e-commerce, where “shipping and handling” occur at an exceedingly rapid pace in large-scale operations, many packages suffer from being over or under packed through the fulfilment process. To solve this issue, this paper presents deployable kirigami-based cushion designs that can be collapsed or deployed depending on the distribution situation. Kirigami is a variation of origami that involves both cutting and folding of paper. …

Higher Sound Levels In K-12 Classrooms Correlate To Lower Math Achievement Scores, Laura Caroline Brill, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Sound levels from occupied classrooms have been gathered from 220 classrooms across four grade levels (3, 5, 8 and 11) over six school days each and processed with k-means clustering into speech and non-speech clusters. Three metrics describing the classroom acoustics, including the average daily A-weighted equivalent level for non-speech, the average daily difference between the A-weighted equivalent levels for speech and nonspeech (a signal to noise ratio), and the mid-frequency averaged reverberation time, were analyzed against classroom-aggregated standardized reading and math achievement test scores, while controlling for classroom demographics including socioeconomic status. Interactions between the metrics and demographics were …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

The Effects Of The Visual Environment On K-12 Student Achievement, Michael Kuhlenengel, Iason Konstantzos, Clarence E. Waters

Durham School of Architectural Engineering and Construction: Faculty Publications

The varying indoor environments among educational buildings can have an impact on students’ ability to learn. This study looks at field data from 220 classrooms in the Midwest, United States, over a two-year period, to analyze the effects of the visual environment on student achievement. The visual environmental metrics considered within this scope include the three new view metrics introduced within the EN 17037 “Daylight of Buildings” standard (Horizontal Sight Angle, Outside Distance of View, and Number of View Layers), as well as standard daylight and electric lighting metrics, focusing on light availability and glare. To capture student achievement, math …

3d-Printable And Open-Source Modular Smartphone Visible Spectrophotometer, Brandon Winters, Nick Banfield, Cassandra Dixon, Anna Swensen, Dakota Holman, Braxton Fillbrown

Chemistry Faculty Publications

The past four decades have brought significant and increasingly rapid changes to the world of instrument design, fabrication, and availability due to the emergence of 3D printing, open-source code and equipment, and low-cost electronics. These, along with other technological advances represent a nexus in time ripe for the wide-spread production and availability of low-cost sophisticated scientific equipment. To that end, the design of a 3D printable and open-source, modular spectrometer is described. This specific instrument is distinctly different from others that have been reported in recent years in that it was designed outside of the “black box” paradigm of …

Simulation For A Mems-Based Ctrnn Ultra-Low Power Implementation Of Human Activity Recognition, Muhammad Emad-Ud-Din, Mohammad H. Hasan, Roozbeh Jafari, Siavash Pourkamali, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an energy-efficient classification framework that performs human activity recognition (HAR). Typically, HAR classification tasks require a computational platform that includes a processor and memory along with sensors and their interfaces, all of which consume significant power. The presented framework employs microelectromechanical systems (MEMS) based Continuous Time Recurrent Neural Network (CTRNN) to performHAR tasks very efficiently. In a real physical implementation, we show that the MEMS-CTRNN nodes can perform computing while consuming power on a nano-watts scale compared to the micro-watts state-of-the-art hardware. We also confirm that this huge power reduction doesn’t come at the expense of reduced …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

A Proposal To Harmonize Bim And Iot Data Silos Using Blockchain Application, Zulkefly Abu Bakar, Malachy Mathews Dr

Conference papers

The integration of Building Information Modelling (BIM) and Internet of Things (IoT) provide significant end-to-end benefits for the architecture, engineering, construction, and operations (AECO) industry. Example applications include on-site assembly services, data localization for built environment, occupancy performance measures and many other analyses that can be used to improve the built environment. However, silos in the BIM and IoT data exchange have impacted the digital process adoption in AECO industry, which aims to change the dynamics and behaviors of the current working process. Penzes, (2018) in his report, acknowledges the AECO industry as one of the most fragmented sectors with …

Framework To Develop Time- And Voltage-Dependent Building Load Profiles Using Polynomial Load Models, Andrew Parker, Mhd Anas Alkrch, Kevin James, Ahmad Almaghrebi, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

The power consumption of buildings over the course of each minute, hour, day and season plays a major role in how this load influences the Electric Power System voltage and frequency, and vice versa. This consumption is based on the building's load component types, efficiencies, and how they consume power and react to changes in real time. Due to this complexity, standard full-building load models are typically voltage-invariant. This paper proposes a novel framework to transform these voltage-invariant building load models into fully time- and voltage-dependent load profiles using available data on the voltage sensitivity of individual load components. While …

A Case Study To Quantify Variability In Building Load Profiles, Andrew Parker, Sam Moayedi, Kevin James, Dongming Peng, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent technology development and penetration of advanced metering infrastructure (AMI), advanced building control systems, and the internet-of-things (IoT) in the built environment are providing detailed information on building operation, performance, and user's comfort and behavior. Building owners can obtain a wide range of energy consumption details at various levels of time granularity to augment their decisions as they manage the building operation and interact with the grid. AMI data are providing a new level of detail and visibility that may enhance building services and assets in the smart grid domain and make buildings inch closer to becoming a grid-interactive energy …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Fire Protection System Analysis Of Air National Guard Readiness Center, Steven A. Waidelich

Fire Protection Engineering: Culminating Experience Project Reports

This report analyzes the impact of a fire located in the atrium at the Air National Guard Readiness Center (ANGRC) located at Joint Base Andrews, Maryland. The fifth floor is an enclosed penthouse used to enclose mechanical and electrical equipment. International Building Code (IBC) 2006 and 2005, section 506.1, excludes elevator penthouses of this type from the height and area calculations. The four occupied floors are used for office areas with the three- story atrium opening onto the balcony of the second- and the third-floor office area, and the second-floor conference center.

The prescriptive portion of this analysis looked at …

Bonderson Engineering Center, Hannah Curry

Fire Protection Engineering: Culminating Experience Project Reports

As part of the requirements for receiving a Master of Science in Fire Protection Engineering from California Polytechnic State University at San Luis Obispo, a Fire and Life Safety Analysis of the Bonderson Engineering Projects Center located on the Cal Poly San Luis Obispo campus is performed. The analysis consists of both a prescriptive and a performance-based analysis.

The prescriptive analysis focuses on reviewing the as-built conditions within the Bonderson Engineering Projects Center for compliance with the current edition of applicable codes and standards. The analysis is performed using the 2018 Edition of the International Building Code (IBC) and the …

Analysis Of Errors Of The Ultrasonic Level And Increasing The Accuracy Of Measuring The Level Of Liquid Materials In Non-Stationary Media, Azamat Alijonovich Yusupov

Chemical Technology, Control and Management

This article is devoted to the analysis of the total error of an ultrasonic level meter designed to measure the level of liquid materials in order to improve the accuracy of the measuring system in tanks. The components of the total error of the process of measuring transformation of the liquid level are determined and the analysis of the main characteristics is carried out, to reduce the random error of the measurement system, the task of ensuring the accuracy of measurement and control of the level using an ultrasonic level gauge is presented, by averaging the measurement results when calculating …

Research On Navigation Efficiency Of Lng Carriers In Caofeidian Port Area, Zhongming Xiao

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Research On The Methods Of Ship's Autonomous Collision Avoidance In Complex Environment, Hongguang Lyu

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.