Other Engineering Commons^™

Economic Talc Deposits Of Montana And Related Firing Problems, Charles J. Lyden

Bachelors Theses and Reports, 1928 - 1970

This thesis has to do with a study of the produc­tion of talc in Montana, describing the local geology of each deposit, and a description of the laboratory tests that were made on various grades of Montana talc in an attempt to determine why some grades of talc can be burned in solid forms while others must be ground, mixed with a binder and molded.

A Preliminary Investigation Of The Hydrometallurgy Of Philipsburg Manganese, W. L. Goodman

Bachelors Theses and Reports, 1928 - 1970

In the past the steel industry of the United States has depended almost wholly on imports for its supplies of manganese. Although it is well known that there are enormous deposits of low grade manganese ore in the United States the production of substantial amounts of ferro-grade mater­ial from domestic sources presents a field for con­structive and practical research.

History Of Ordnance Technical Intelligence In World War Ii, Part 2: Areas Of Operation (Cbi, Cap, Eto, Mto, Natousa, Swpa, And Russia), Us Ordnance Department, Technical Branch, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

During World War II, the Ordnance Department was one of the army technical services. There were a number of technical services including the Chemical Warfare Service, the Army Medical Department, the Corps of Engineers, the Quartermaster Corps, the Signal Corps, and the Transportation Corps. The technical services were bureaus providing weapons, equipment, and services to the Army. They managed the careers of officers in their corresponding branches, and organized special military units. They also ran schools to train individual and military units in their specialty.

During World War II the emphasis of technical intelligence was foreign weapons and equipment. The …

History Of Ordnance Technical Intelligence In World War Ii, Part 3: Tab 1- History Of Ordnance-Cios [Cooperation]; Tab 2 – Draft Of Speech For Ord Ti Teams (Wwii); Tab 3 – Speech On Metallurgy Of Foreign Auto Materials; [And] Tab 4 – Article On Material For The Franklin Institute, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

During World War II, the Ordnance Department was one of the army technical services. There were a number of technical services including the Chemical Warfare Service, the Army Medical Department, the Corps of Engineers, the Quartermaster Corps, the Signal Corps, and the Transportation Corps. The technical services were bureaus providing weapons, equipment, and services to the Army. They managed the careers of officers in their corresponding branches, and organized special military units. They also ran schools to train individual and military units in their specialties.

During World War II the emphasis of technical intelligence was foreign weapons and equipment. The …

History Of Ordnance Technical Intelligence In World War Ii, Part 1: History, Orders & Circulars, And Publicity, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

During World War II, the Ordnance Department was one of the army technical services. There were a number of technical services including the Chemical Warfare Service, the Army Medical Department, the Corps of Engineers, the Quartermaster Corps, the Signal Corps, and the Transportation Corps. The technical services were bureaus providing weapons, equipment, and services to the Army. They managed the careers of officers in their corresponding branches, and organized special military units. They also ran schools to train individual and military units in their specialties.

During World War II the emphasis of technical intelligence was foreign weapons and equipment. The …

Permability And Porosity Of Devonian Dolomites In Northwestern Montana, Jack W. Nordquist

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation is to record data per­taining to porosity and permeability derived from physical tests performed on Devonian dolomites occurring in northwestern Montana, and to subsequently summarize the results obtained as an aid in determining the possibility of those dolomites being suitable reservoir rocks for oil and gas accumulation.

Vermiculite, Occurence, Character, And Concentration Of Mineral From The Pony District, Madison County, Montana, A. Saterdal

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to investigate the occurrence and character of the vermiculite deposits approximately four miles northwest of Pony; Madison County, Montana. The deposits are situated in rolling foothills at the northern end of the Tobacco Root Mountains.

The Battle Of Enemy Equipment: A Story Of Asf Enemy Equipment Intelligence Service Teams, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This document was digitized by Jonathan Clemente who supplied it to Prof. Bolin.

This document is Special Technical Bulletin No. 5, 13 March 1945, issued by the Office of the Director of Intelligence, Army Service Forces.

The Enemy Equipment Intelligence Service Teams (EEIS) were personnel from the Army Technical Services – the Ordnance Department, Chemical Warfare Service, Quartermaster Corps, Signal Corps, Army Medical Department, and Transportation Corps – which were trained by the Army Service Forces to collect enemy equipment for use in the field and for evaluation in the field and in the continental United States.

Actually the Army …

The Solubility Of Zinc Ethyl Xanthate In Water, Thomas M. Mckenzie

Bachelors Theses and Reports, 1928 - 1970

A determination of the solubility of zinc ethyl xanthate was attempted by measuring the refractive index of a saturated solution of that salt. The small increment in refractive index effected by adding zinc ethyl xanthate to water in saturation quantities rendered measurements difficult and of dubious accuracy.

Hydrogen Overvoltage Of Cadmium Bismuth And Antimony Bismuth Alloys, Edwin W. Stevens

Bachelors Theses and Reports, 1928 - 1970

A method to measure hydrogen overvoltage was devel­oped and checked with metals of known overvoltage. Alloys of bismuth and antimony and of bismuth and cad­mium were prepared and their overvoltages determined.

The Electrodeposition Of Copper-Cobalt Alloys, Richard L. Dunn

Bachelors Theses and Reports, 1928 - 1970

An attempt was made to deposit a 50:50 copper-cobalt alloy from various sulfate electrolytes. No true 50:50 alloy was obtained but various mixtures of cobalt and copper rich crystals were deposited.

Fluorite Near Silver Bow, Montana, Charles V. Campbell

Bachelors Theses and Reports, 1928 - 1970

The wartime demand for fluorspar has caused renewed interest in fluorite deposits. Near Silver Bow, Montana, a deposit of massive, coarsely crystalline fluorspar, which has not been described in the literature, has attracted the atten­tion of the United States Geological Survey.

The Incompatibility Of Certain Alcohol And Soap Frothers, John Thomas Doherty

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to elucidate this phenomena of frother incompatibility, and to offer an explanation based upon several divergent lines of investigation. The research was limited to four common frothing agents, namely, pine oil, n-amyl alcohol, sodium oleate, and sodium lauryl sulphate (Dreft).

Production Of Iron-Tin Compacts By Powder Metallurgy And A Synopsis Of Their Principle Properties, Matt C. Andrews

Bachelors Theses and Reports, 1928 - 1970

This thesis is concerned primarily with the production of metal powder compacts of iron and tin. In producing these compacts, the effects of process­ing variables on some of the essential properties of the pellets made were investigated.

Hardness And Electrical Resistivity Of Copper-Iron Powder Metal Compacts, Fred A. Foyle Jr.

Bachelors Theses and Reports, 1928 - 1970

Although powder metallurgical methods have been used for years to fabricate tungsten and platinum, very little scientific data have been recorded until the beginning of this century. A large percentage of all commercial production at present is based upon past practice rather than upon scientific knowledge.

Methods Of Determining Porosity And Spatter Losses Of Arc Welds, Campbell W. F. Funk

Bachelors Theses and Reports, 1928 - 1970

The original objective of this project was to determine the effect of varying current intensity and electrode coating composition upon the spatter losses and porosity of arc welds made by alternating current. This subject was suggested by the Welding Research Council of the Engineering Foundation, which is a clearing house for welding research in order to avoid du­plication of work.

Age Hardening Of Copper Antimony Alloys, William R. Stern

Bachelors Theses and Reports, 1928 - 1970

A large number of alloys of varying percentages of copper and antimony were prepared. These alloys were treated in various ways which might be expected to produce age hardening. The effect of cold working was studied in the range where the alloys were malleable.

The Electrodeposition Of Iron-Manganese Alloys, Raymond D. Magorien

Bachelors Theses and Reports, 1928 - 1970

An electrodeposition of an iron-manganese alloy was made from the same conditions determined by previous re­search. Various addition agents were experimented with in an attempt to produce better conditions for electro-deposition. It was found advantageous to add small a­mounts of sodium lauryl sulfate and ammonium sulfite to the electrolyte.

An Isopach Map And Discussion Of The Marine Jurassic Of Western United Sates And Canada, John H. Ferry

Bachelors Theses and Reports, 1928 - 1970

Recent demands for petroleum to carry on the war effort have resulted in widespread prospecting in the northern Great Plains. Nearly all oil wells now drilled are of a depth to penetrate the marine Jurassic formations. It is known that these strata differ in thickness from place to place, but information of distribution, thickness, and lithology has not yet been compiled.

Electroplating Of Chromium Upon A Nickel Plated Magnesium Alloy, Harmel Dawson

Bachelors Theses and Reports, 1928 - 1970

A nickel plating operation for magnesium alloys was investigated and proved successful in plating a small sample of a typical commercial magnesium alloy, Dowmetal J1.

Flotation Of A Complex Sulphide Ore Containing Tetrahedrite, James C. O'Dea, Lorimer W. Hoar

Bachelors Theses and Reports, 1928 - 1970

The ore investigated in this thesis is a zinc-copper-lead ore. Microscopic analysis of this complex sulphide ore showed it to contain pyrite_, sphalerite, arsenopyrite, galena, chalcopyrite, tetrahedrite, and covellite, with quartz as the gangue constituent.

The Electrodeposition Of Chromium From Trivalent Salt Solutions, Bahri Ersoz

Bachelors Theses and Reports, 1928 - 1970

The enormous number of previous experiments and researches for the improvement of the commercial chromic acid bath, did not succeed even in the partial elimination of any one of the disadvantages of chromic acid bath. This led the author to believe that the poor performance is an inherent quality of the chromic acid bath, and is due to the fact that the deposition occurs from the higher state of oxidation.

Bright Electroplating Of Copper In The Acid Bath, Elwood K. Jensen

Bachelors Theses and Reports, 1928 - 1970

Plating of various objects with mirror-like surfaces of chromium, nickel, and other metals has expanded considerably during the past decade, and now ranks as an important enterprise, particularly with respect to the automotive industry.

The Effect Of Boron On The Hardenability Of Steel, William J. Foy

Bachelors Theses and Reports, 1928 - 1970

Many attempts have been made to improve iron and steel and their alloys by the addition of boron. The re­sults obtained were not encouraging for the reason that the amount of boron used, generally from 0.2 to 2.0 per cent is altogether too high. This percentage of boron ren­ders the product hard and brittle and of late the experiments with boron in this connection have been practically abandoned.

An Attempt To Increase The Permeability And Porosity Of The Cut Bank Oil Sand By Treatment With Various Reagents, Donald H. Johnson

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation was to attempt to find some means of increasing the effective porosity and permeabil­ity of the producing sands of the Cut Bank Oil Field, with the hope that thereby the ultimate recovery of petroleum from this field may be increased. Although the percentage increase in production thus effected would undoubtedly be small, it would represent a substantial volume of petroleum in view of the great quantity of oil and gas present in this field.

Geology And Occurence Of Graphite At The Crystal Graphite Mine Near Dillon, Montana, Charles K.W. Hum Hum

Bachelors Theses and Reports, 1928 - 1970

The problem to be considered embraces the mineralogy and the mode of formation of a very pure and vein-like deposit of crystalline graphite. This deposit is of more than ordinary interest because in its geological relations and in the character of its graphite it shows many similarities to the famous deposits of Ceylon.

Electrolytic Deposition Of Iron, Irving M. Kenoffel

Bachelors Theses and Reports, 1928 - 1970

In this thesis the purpose was to obtain a good iron deposit from a relatively simple bath. The deposit was to be of good nature and low in Carbon content. Also included is a summary of the uses to which electrolytic iron can be put as well as a summary of work done by other researchers in depositing iron electrolytically.

Electrolytic Manganese From Aqueous Sodium Manganate Solution, William F. Sullaway

Bachelors Theses and Reports, 1928 - 1970

The contents of this paper represent attempts to deposit the metal, manganese from sodium manganate solutions. The source of manganese was limited to the nodulized product from roasting rhodochrosite and was therefore chiefly manganese oxide.

Spectrographic Analysis Of Montana Limestones, Clifford A. Barkell

Bachelors Theses and Reports, 1928 - 1970

Spectrographic analysis of limestones as a possible method of correlation of geologic formations is an altogether new line of investigation. As far as known the only previous work consists of a few analyses made by Fred Lines in his bachelor thesis work at Montana School of mines in the spring of 1942.

Concentration By Flotation Of A Complex Galena - Sphalerite - Chalcopyrite Ore From The Nine Mile District Near Missoula, Montana, Truxton J. Fisher, John L. Tokich

Bachelors Theses and Reports, 1928 - 1970

At the present time ore bodies being mined are becoming more and more complex in mineral association, thus presenting a more difficult problem in their concentration. Lead-zinc sulphide ores are among the more common ores which present such difficulties.