Other Engineering Commons^™

Decision Analysis Tool For Appropriate Water Treatment Technologies In Improverished Villages, Conner David Johnston

Industrial and Manufacturing Engineering

No abstract provided.

Nonprofit Management Through Effective Database Utilization, Jennifer Muscat

Industrial and Manufacturing Engineering

This project addresses problems found within a specific department within Lifewater International. Lifewater faces many unique challenges operating as a nonprofit. Like most nonprofits, elaborate costly solutions are simply not an option when solving department problems. This project addresses three interrelated problems within Lifewater’s Development and Communications Department. The three issues addressed are Volunteer Management, Donor Management, and Project Management. Each problem was examined to determine the areas for improvement that this project can handle and solve. Each problem was given an improved design. A Volunteer Management System was designed to increase volunteer utilization and appropriately match volunteers with appropriate …

What About The Children? Benjamin And Arendt: On Education, Work, And The Political, Jules Simon

Selected Works Temporary Series

This article is a rough draft of an article that I contributed to an edited volume of articles dealing with progressive education theory. I reflect on articles that Hannah Arendt and Walter Benjamin wrote that deal with educational reform and innovation, both political in nature.

Design And Development Of An Integrated Waste Management System For Huai Nam Khun, Thailand, Annie Duong

Industrial and Manufacturing Engineering

Background

A rural village in Thailand has always been limited in access to waste collection services and processing facilities. As a result, their behaviors of disposing waste in ineffective manners such as dumping and burning causes a variety of environmental impacts. In addition, the people dwelling in these areas are often unaware of the health risks associated to these types of engagements because of the inadequate education system. For a long time coming these circumstances remained untouched until a non-profit organization recently shed light to the need for a solution. An investigation, to develop a design solution in order to …

Environmental Savings Tracking System For Cisco Systems, Inc., Lauren J. Herrera

Industrial and Manufacturing Engineering

This paper illustrates the research, methodology and design used to create an environmental savings tracking system, also known as the Green Dashboard, for Cisco Systems Inc.’s Green Initiatives Group to quantify and capture an annualized summary of savings from projects initiated within its Customer Value Chain Management Organization. It articulately describes the

methodology behind the selection of metrics and the design of the process required to collect and track these quantitative direct savings. As well as describes the benefits associated with implementing this system, such as shifting Cisco towards more sustainable products and increased customer satisfaction and investor relations by …

Mini Cooper Ram-Air Duct System, Christopher Dirkes, Kyle Vanden Berg

Industrial and Manufacturing Engineering

Due to extensive track use, Mini Cooper GP’s are notorious for having brake overheating problems. In the conceptual design stages of the car, BMW engineers intended to install brake ducts to prevent overheating, but due to time constraints, the cars were shipped without the ducts they were intended to have. The goal of this project was to design and manufacture a brake duct kit for the Mini Cooper GP. After a conceptual design of the system, make-buy decisions were made for each component. The components to be made were designed using computer-aided drafting, engineering, and manufacturing software. The components manufactured …

Design Of A Low Cost Powered R/C Combat Airplane And Manufacturing Plan, Jonathan N. Bailey

Industrial and Manufacturing Engineering

The goals of this project are to design a low cost powered remote control combat airplane capable of outdoor flight, named the Aero EX and to develop a manufacturing plan to produce each unit at a selling price of $200, while operating at a 25 vehicle batch rate inside a 1,000 square foot facility. These goals are achieved using: Aerospace fundamentals to design the vehicle, Design for Manufacturability to optimize the design for minimal use of labor, Design for Assembly to give consumers the ability to build the vehicle without fixtures, Pull production to eliminate scheduling and match customer demand. …

Layout And Procedure Re-Design Of Dcpp Receiving Warehouse, Nicole Elizabeth Riegel

Industrial and Manufacturing Engineering

The receiving warehouse at Diablo Canyon Power Plant, owned by Pacific Gas and Electric, serves as a place to recognize the receiving of items into an ERP system, repackage and label items for long-term storage, and organize items for delivery inside the secured area. The warehouse managers would like to redesign the layout and procedures of the warehouse. Currently items are not received, scanned, or shipped in a timely manner. The flow of people and items in the receiving and shipping area is chaotic and space is limited especially during plant outages. The objective of this project is to: • …

Ernie Ball Guitars Woodshop Facilities Redesign, Cameron Lea Schlemer

Industrial and Manufacturing Engineering

This report details a facilities design for Ernie Ball’s guitar and bass guitar manufacturing facility in San Luis Obispo, CA. Specifically, this project will redesign the layout for the Woodshop, the largest of the 5 manufacturing cells in the facility. This project was completed using the Systematic Layout Planning procedure and focused mostly on phase II and III in which the specifics for a layout are determined, however, space requirements were not evaluated as it was not within scope.

The first step was to develop departments in the facilities; two master departments were identified for the neck manufacturing process and …

5-S And The Facility Redesign For A Cleaning Products Manufacturing Company, Jonathan Eipper

Industrial and Manufacturing Engineering

This project deals with a “green” cleaning products company in Southern California. Business has increased 38% in the past year along with changes in production capacity and capability, so the company has identified a need for a sustainable model of manufacturing at their new and expanded facility. Goals of promoting sustainable waste management, minimizing types of lean waste, properly storing inventory, improving workplace communication, and defining production tasks will be addressed in this facilities redesign through 5S. The biggest component and outcome of the facility design will be organization. This leads to a goal of eliminating waste, which will in …

Design For Manufacturing Of Sports Equipment, Cedrick Bit, Christopher L. Head

Industrial and Manufacturing Engineering

The purpose of this project was to validate industrial designs for a product in its conceptual stage and suggest/implement design changes that suit the contracting company’s needs while assuring the product maintains its basic functional requirements. Techniques and methods used to validate the design include 3‐D solid modeling, physical product application using rapid prototyping to produce the product. Methods of design for manufacturing were analyzed in the design. Processes used in the validation and verification of the design include solid modeling design, methods of measurements, fixture design and manufacturing processes. Full design specifications and solid model files were finalized and …

Digester Selection And Operation For Heybeli Island, Spencer Fackler, Joseph Violetti

Industrial and Manufacturing Engineering

The Heybeli Digester project originated with Sema Alptekin in her personal research and was incorporated into a Senior Project opportunity at California Polytechnic State University, San Luis Obispo. The aim of this project was to select and design a plan for the use of a digester for the island of Heybeli, Turkey. The objective of this plan was to incorporate economic, social, and environmental justifications to evaluate if a digester would be a benefit to the community.

Systems Engineering analysis is a vital tool when working with complicated projects that include multiple systems interfacing with one another. Through the use …

Determining A Reliability Factor For Photovoltaic's In San Luis Obispo, Ryan S. Roach

Industrial and Manufacturing Engineering

This project will analyze raw photovoltaic (PV) solar panel performance data in order to determine a reliability factor for solar panels in San Luis Obispo. This project is a subset of a larger project being performed by SLO RESCO, which is funded by a grant from the California Energy Commission. Their project will explore the use of solar, wind, geothermal, and biomass renewable resources. The scope of this project is limited to a small section of RESCO's analysis of solar panel technology and implementation in which a reliability factor will be generated.

The objective is to determine a reliability factor …

Application Of Radio Frequency Identification To An Asset Checkout System, Ma'ayan K. Bennaim

Industrial and Manufacturing Engineering

Radio Frequency Identification (RFID) is a growing technology which is increasingly utilized throughout industry. This senior project identifies an RFID alternative to the checkout system in the tool crib of the Cal Poly Aero Hanger. A new database is designed and built to interface with an RFIDeas AIR enroll reader. The system realizes vast time savings in check in times and increases student accountability for the tools which are checked out by tagging tools.

Visual Representations Of Queried Database Results Using Google's Mapping Technologies, Steven Michael Kilbert

Industrial and Manufacturing Engineering

Database queries have been used in business applications throughout the world to filter out specific information which is often used as a basis for making a decision. Despite the broad use of queries, there are only a limited number of ways to represent results, the most common being a dynaset, or results table. This paper describes the investigation of methods to create more visual representations of results using maps to show queried geospatial data. From these methods, applications were successfully developed to create customized maps in Google Earth and Google Maps based on queried geographical data from Microsoft Access databases. …

What About The Children? Benjamin And Arendt: On Education, Work, And The Political, Jules Simon

Departmental Papers (Philosophy)

This article is a rough draft of an article that I contributed to an edited volume of articles dealing with progressive education theory. I reflect on articles that Hannah Arendt and Walter Benjamin wrote that deal with educational reform and innovation, both political in nature.

Concurrent Masters Degrees Across The Atlantic: Innovations, Issues And Insights, Michael Dyrenfurth, Mike Murphy, Gary Bertoline, Robert Herrick, Kathryne Newton, Gareth O'Donnell, Donal Mchale, Nuria Castell, Miquel Barcelo, Didac Balas, Maria Ribera Sancho, Jordi Garcia

Conference papers

Atransatlantic degree consortium to implement a four-semester dual masters degree initiative across a three-institution consortium consisting of Purdue University (USA), the Technological University Dublin (DIT), and the Universitat Politècnica de Catalunya (Spain) is presented in this paper.

Quality Indicators For Engineering And Technology Education, Michael Dyrenfurth, Mike Murphy, Gary Bertoline

Conference papers

In recent years the development and use of university rankings, comparisons, and/or league tables has become popular and several methodologies are now frequently used to provide a comparative ranking of universities. These rankings are often based on research and publication activity and also not uncommonly focus on indicators that can be measured rather than those that should be measured. Further, the indicators are generally examined for the university as a whole rather than for university divisions, departments or programs. Implicit also is that placement in the rankings is indicative of quality. This paper provides an overview of the methodologies used …

The Measurement Of Success In External Engagement Activities, Mike Murphy

Conference papers

Our ambition is to identify, through the presentations and the discussion, a number of key insights and necessary actions for development of more and deeper partnerships between Higher Education Institutions and Employers.

A Doctoral Thesis Examining Change In A Hei In Ireland: Changing Universities And The Response Of Academics To Change In The Dublin Institute Of Technology, Kevin Kelly

Books/Book chapters

This is doctoral thesis undertaken by an experienced academic in the Engineering Faculty of a Higher Education Institute in Ireland. It examines the demand for universities to change in response to a fast changing external environment. This research explores how stakeholders are responding to the demands for change and how a bureaucratic organisation is attempting to become more responsive and innovative.

Solar Cell Efficiency Enhancement Through Down-Shifting And Up-Converting Layers: The Ephocell Project: Luminescent Downshifting Quantum Yield Measurements, M. Kennedy, L. Aubouy, D. Gutiérrez-Tauste, A. Jorge, M. Faccini, G. Noriega, M. Di Lorenzo, M. Cocca, M. Avella, M. Errico, G. Gentile, John Doran, Brian Norton, S. Baluschev, J. Bistué Guardiola, A. Robles Molina, J. Puigdollers, C. Voz, S. Daren, F. Tsvetkov, A. Pashov

Conference Papers

Organic cells and dye-sensitized cells developed to-date have a narrow active absorption range, relative to the spectral range of the available solar resource. Their efficiency could be significantly enhanced through a process of down-shifting (DS) and up-conversion of non-absorbable photons converting them to photons better matching the spectral response of the particular solar cell. The DS molecules must exhibit a large Stokes shift and high luminescent quantum yield when incorporated in the downshifting polymer layer. In this paper, the QY of a downshifting Europium (III) complex in solution is determined using two distinct experimental techniques. The QY is measured for …

Broadening Ethics Teaching In Engineering: Beyond The Individualistic Approach, Eddie Conlon, H. Zandvoort

Articles

There is a widespread approach to the teaching of ethics to engineering students in which the exclusive focus is on engineers as individual agents and the broader context in which they do their work is ignored. Although this approach has frequently been criticised in the literature, it persists on a wide scale, as can be inferred from accounts in the educational literature and from the contents of widely used textbooks in engineering ethics. In this contribution we intend to: (1) Restate why the individualistic approach to the teaching of ethics to engineering students is inadequate in view of preparing them …

There's More To Planning Than Coloured Maps, Lorcan Sirr

Articles

No abstract provided.

Newsletter 43 Issue 3 - Fall 2010 - Nuts And Bolts

Friends of the Larsen Tractor Museum

No abstract provided.

Active Noise Barrier Minimizing Pressure Gradient, Carl Hart, Siu-Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

Minimization of the sound pressure field within the shadow zone of a noise barrier is achieved by reducing the pressure gradient along a line, at the top of a barrier, via active noise control. The noise control effectiveness of a barrier is increased by this strategy, especially for specific system configurations. The proposed method was evaluated by numerical simulation. Results indicate that system orientation has little effect on minimizing the pressure gradient at the top of the barrier when the error sensors are invisible to the primary noise disturbance. Highly effective control within the shadow zone and close to the …

Experimental Study Of Blast Resistant Glazing System Response To Explosive Loading, William Chad Wedding

University of Kentucky Master's Theses

This thesis recounts the experimental study of the dynamic response of a blast resistant glazing system to explosive loading. A combination of triaxial force sensors, pressure gauges, and laser displacement gauges capture the response in detail over a wide range of scenarios. The scenarios include low level blast loading to characterize the reaction at points around the perimeter of the window, moderate level blast loading to examine the repeatability of the blast scenario, and high level blast loading to capture the response during failure as the tensile membrane forms. The scenarios are modeled via an analytical Single-Degree-of-Freedom model as well …

Fusion Of Sources Of Evidence With Different Importances And Reliabilities, Florentin Smarandache, Jean Dezert, J.M. Tacnet

Branch Mathematics and Statistics Faculty and Staff Publications

This paper presents a new approach for combining sources of evidences with different importances and reliabilities. Usually, the combination of sources of evidences with different reliabilities is done by the classical Shafer’s discounting approach. Therefore, to consider unequal importances of sources, if any, a similar reliability discounting process is generally used, making no difference between the notion of importance and reliability. In fact, in multicriteria decision context, these notions should be clearly distinguished. This paper shows how this can be done and we provide simple examples to show the differences between both solutions for managing importances and reliabilities of sources. …

Development Of A Framework For The Assessment Of The Role And Impact Of Technology On The Public Procurement Process: An Irish Health Sector Study, Paul Davis

Doctoral

This thesis sets out to examine how the role and impact of technology, in the context of the public procurement process, can be assessed by addressing it as a single bounded structural entity. The thesis specifically examines the procurement process in the Irish Health Sector. This thesis takes the view that context for the procurement process is critical and that adopting a structuration approach to the examination of the process allows for a greater understanding of the role of technology. The thesis is built around a thematic structure which examines the changing relationship between information technology systems and organisational structure. …

Noise Propagation Through Open Windows Of Finite Depth Into An Enclosure, Caleb Sieck, Siu-Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

Predicting the insertion loss of an opening backed with an enclosed space is important for building noise control. Recent research in sound transmission through apertures of finite depth in infinite rigid baffles has included the effects of propagating and evanescent modes within the aperture in order to extend models to higher frequencies. The present study extends the model to the case of the aperture backed by a cavity as opposed to sound radiating into half-space. The role of coupling between the aperture modes, radiation modes, and cavity modes in the transmission was investigated. The results were compared to those of …

E.J. Gallo Winery Spirit-Makers Facility, Aaron Pickar

Industrial and Manufacturing Engineering

With growing demand for E.J. Gallo spirit brands, the cramped and cluttered facility allocated to the spirit-makers does not provide an adequate work environment to design and test new hard alcohols. E.J. Gallo Winery wants to relocate the spirit-makers to a new facility located near the brandy production floor for under 200,000 dollars. In order to do this, a revised systematic approach to facility design is used.

In this process, the departments are first defined, then the relationships between these departments and the space requirements are documented. Once these planning steps are complete, alternative layouts are constructed and analyzed until …