Other Engineering Commons^™

The Integration Of Sustainable Development Competencies In Irish Engineering Education: Findings Of A Curriculum Content Investigation Of Four Engineering Programmes, Iacovos Nicolaou, Eddie Conlon

Conference papers

This paper presents the initial findings of an investigation of the Sustainable Development (SD) content in five professional engineering degree programmes in a large Irish Institute of Technology.

A comprehensive investigation of the modules content was conducted to see to what extent the learning outcomes for SD as set out in the Barcelona Declaration and SD competencies were covered by the modules. It was found that 40% of the 137 modules included SD learning outcomes and/or addressed SD competencies. The modules have a focus on environmental issues and tend to address only one of the three dimensions, environmental, social and …

Achieving A Holistic View Of The Life Cycle Performance Of Existing Dwellings, Albert Famuyibo, Aidan Duffy, P. Strachan

Articles

Models which fully evaluate the life cycle energy and greenhouse gas (GHG) emissions of national housing stocks are not reported in literature. Capturing a holistic view of energy and emissions of the residential sector is an important process that can lead to a more effective policy making. This paper presents a methodology which evaluates the life cycle energy and GHG emissions of retrofitting housing stocks considering all life cycle stages and incorporating, to the greatest extent possible, all upstream inputs.

To achieve this, we developed a hybrid model of the existing Irish housing stock, comprising a process-based approach supplemented by …

Using Gis To Delineate Headwater Stream Origins In The Appalachian Coal-Belt Region Of Kentucky, Jonathan A. Villines

Theses and Dissertations--Biosystems and Agricultural Engineering

Human activity such as surface mining can have substantial impacts on the natural environment. Performing a Cumulative Hydrologic Impact Assessment (CHIA) of such impacts on surface water systems requires knowing the location and extent of these impacted streams. The Jurisdictional Determination (JD) of a stream’s protected status under the Clean Water Act (CWA) involves locating and classifying streams according to their flow regime: ephemeral, intermittent, or perennial. Due to their often remote locations and small size, taking a field inventory of headwater streams for surface mining permit applications or permit reviews is challenging. A means of estimating headwater stream location …

Indeterminate Masses, Elements And Models In Information Fusion, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper at the beginning, we make a short history of the logics, from the classical Boolean logic to the most general logic of today neutrosophic logic. We define the general logic space and give the definition of the neutrosophic logic. Then we introduce the indeterminate models in information fusion, which are due either to the existence of some indeterminate elements in the fusion space or to some indeterminate masses.

The best approach for dealing with such models is the neutrosophic logic, which is part of neutrosophy. Neutrosophic logic is connected with neutrosophic set and neutrosophic probability and statistics.

Analysis Of Integrated Engineering And Social Science Approaches For Projects In Developing Communities, Parry F. Garff, Eric C. Dahlin, Carol Ward, Randy Lewis

Faculty Publications

Current design methods such as appropriate technology, human-centered design, and participatory design are intended to generate development projects that resonate with users in communities in developing countries. These approaches are extremely useful, but often lack adequate documentation about how to collect data on and incorporate users feedback into the project’s design. To address this gap, we introduced social science research methods into a service-learning course for undergraduate engineering students, which culminated in a trip to the communities for whom they were designing, to help students incorporate user feedback into the design of their projects. This paper documents our efforts. One …

Effects Of Reverberation And Noise On Speech Comprehension By Native And Non-Native English-Speaking Listeners, Z. Ellen Peng, Lily M. Wang, Siu-Kit Lau, Adam M. Steinbach

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have demonstrated the negative impact of adverse signal-to-noise-ratios on non-native English-speaking listeners' performance on speech recognition using recall tasks, as well as implied that comprehension skills were more impaired than recognition skills under reverberation and noise. The authors have themselves previously conducted a pilot study on three native and three non-native Englishspeaking listeners to examine the effects of reverberation and noise using speech comprehension tasks. Those results suggested that speech comprehension performance is worse under longer reverberation times (RT), and that a longer RT is more detrimental to speech comprehension by non-native listeners than native listeners. This paper …

Acoustic Tweets And Blogs: Using Social Media In An Undergraduate Acoustics Course, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Each fall, the author teaches an undergraduate architectural acoustics course to around 40 third-year architectural engineering students at the University of Nebraska. Beginning in 2011, a social media component was introduced to explore the use of this technology and how it may supplement the students' learning experience. Students were given an opportunity to receive extra credit by using Twitter and/or blogging about course material using a set hashtag (#AE3300) or through the course website. Results were positive, and the author will discuss pros and cons that she has experienced in adding this social media component. Suggestions for future implementations and …

Investigation Into The Relationship Between Hurricane Storm Parameters And Damage, Jeremy S. Young

UNF Graduate Theses and Dissertations

“Economic damage, such as damage to property and infra-structure, from hurricane surges depends on two factors 1) the depth of coastal inundation and 2) the area covered by the surge” (Irish et. al 2007). Typically, damage estimates are developed after hurricanes have dissipated. To have the ability to predict hurricane damage in advance based upon various physical parameters would be a technical advance that could aid vulnerable coastal communities with hurricane planning. This thesis advances this goal forward by relating “Total Normalized Damage” to “Surge Scale” along with other key parameters. In this thesis Total Normalized Damages are compared to …

Gravure Printability Of Indium Tin Oxide Nanoparticles On Glass And Pet Films For Applications In Printed Electronics, Dania Awni Alsaid

Dissertations

The advancements in the field of solution processable electro-active materials and their ability to be printed on different substrates have led to the evolution of printed electronics. In this field, electronic components are manufactured with conventional printing methods. Transparent electrodes made from indium tin oxide (ITO) are part of many electronic devices. Currently in industry, highly conductive ITO films are prepared by sputtering. The sputtering and then patterning of ITO films is a sophisticated process that consumes high energy, generates waste and produces films with limited flexibility. Therefore, there is a need to investigate processing methods for creating ITO films …

Improving Rapid Prototyping Through The Installment Of 3d Printers In Automotive Companies, Kelly Mccarthy

Honors Theses

Three-dimensional (3D) printing is a relatively new form of additive manufacturing that has the potential to induce a second industrial revolution. This technology utilizes a print head to lay down raw materials in successive layers to fabricate a three dimensional object. There are several techniques in 3D printing, two of which will be discussed hi this proposal: fused deposition modeling (FDM), and inkjet/polyjet matrix 3D printing.

Although this technology has been around since the 1980s, it is constantly evolving and new materials, uses, and objects are created daily. This technology presents the potential to manufacture a variety of objects across …

Mixed Method Collaboration In The Built Environment, Dermot Kehily

Conference papers

The built environment discipline or inter-discipline is a relatively new field in academic research. Its subject matter however is based on the traditional disciplines of the construction and property industries. Determining your ontological position and epistemological approach based on the researchparadigm of one of these fields’ may not provide an adequate solution to your research objectives.This paper outlines that framing your research within the broader confines of the built environment; drawing from related fields in an integrated manner may provide a more successful outcome.Arguments whether the built environment is an academic discipline or even the range of subjects thatmake up …

Modernization Of House #3: Improving Greenhouse Cut Flower Production And Students' Experience By Modernizing House #3, Kristina Anton

Biomedical Engineering

This paper documents the modernization of the black cloth, lighting, shade, and support systems in one of Cal Poly's on-campus, student operated cut flower production greenhouses. Problems with the old system are examined along with design requirements for a new system. Alternate designs are considered along with the installation process of the chosen design.

Lifecycle Energy Consumption Prediction Of Residential Buildings By Incorporating Longitudinal Uncertainties, Endong Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

Accurate prediction of buildings’ lifecycle energy consumption is a critical part in lifecycle assessment of residential buildings. Longitudinal variations in building conditions, weather conditions and building’s service life can cause significant deviation of the prediction from the real lifecycle energy consumption. The objective is to improve the accuracy of lifecycle energy consumption prediction by properly modelling the longitudinal variations in residential energy consumption model using Markov chain based stochastic approach. A stochastic Markov model considering longitudinal uncertainties in building condition, degree days, and service life is developed: 1) Building’s service life is estimated through Markov deterioration curve derived from actual …

Identification Of Orbital Objects By Spectral Analysis And Observation Of Space Environment Effects, Jason B. Rapp

Master's Theses

This report presents an investigation and development of the methods for orbital object identification. Two goals were accomplished in this master’s thesis; the development of a method of inverting material proportions from an object’s combined spectrum, and the investigation of methods and initialization of measurement of space environment effects on spectral features of common spacecraft materials. A constrained least squares approach was chosen for inverting spectral proportions from the combined spectra. The final results fall within 1 - 15% of the original spectrum, depending on the quality and noise levels of the original spectrum. Additionally, the effects of outgassing and …

Training Professionals’ Usage And Understanding Of Kirkpatrick’S Level 3 And Level 4 Evaluations, Perri Estes Kennedy

Boise State University Theses and Dissertations

Behavior-based (Level 3) and results-based (Level 4) evaluations of training interventions can provide organizations with substantive proof of the value of those interventions. Training professionals have long acknowledged the necessity of conducting such evaluations, yet Level 3 evaluations are conducted for only about half of all training interventions and Level 4 for about one-third. This research examined the frequency with which training professionals currently conduct Level 3 and Level 4 evaluations, their perceptions on the utility of Level 3 and Level 4 evaluations, and the factors that facilitate or obstruct their attempts to perform such evaluations.

The research was conducted …

Inkjet Printability Of Electronic Materials Important To The Manufacture Of Fully Printed Otfts, Sooman Lim

Dissertations

In this study, the inkjet printability of materials important to fabricating OTFTs was researched. In order to understand the jetting evolution of inkjet printed inks, simulations were performed with a nano copper and nano particle silver ink. To predict the inkjettability of the nano copper ink, Z and Oh numbers at different temperatures were determined. The results from the simulation studies were compared to experimental results obtained using a Dimatix inkjet printer. For the semiconductor ink, the inkjet printability of two organic semiconductors, P2TDC17FT4 (poly[(3,7-diheptadecylthieno[3,2-b]thieno[2',3':4,5]thieno[2,3-d]thiophene-2,6-diyl)[2,2'-bithiophene]-5,5'-diyl] dissolved in 1,2-dichlorobenzene and P3HT (poly-3 hexylthiophene) were compared to determine the relationship between drop …

Power Tac 2012: Agent Technologies For The Smart Grid, Carlos E. Montijo, Daniel H. Grajeda, Christopher Kiekintveld

COURI Symposium Abstracts, Summer 2012

Intelligent agents are a critical technology in managing the increasingly complex and decentralized energy systems that are evolving. These technologies, often called the "smart grid," have the potential to improve the efficiency and reliability of future energy markets. This project focuses on developing a trading agent to compete in the 2012 Power TAC game, a new scenario this year that is part of the annual Trading Agent Competition. Modeling a liberalized retail electrical energy market, Power TAC is a simulation in which competing trading agents or brokers offer energy services to customers via tariff contracts. The brokers must also serve …

Seismic Tomography And Smoothing Filters, Mathew Guevara, Olac Fuentes

COURI Symposium Abstracts, Summer 2012

Seismic Tomography and Smoothing Filters Seismic Tomography is a technique used by geologists to map the Earth's crust. Seismic Tomography is an iterative process that develops a model based on travel times of waves from explosion sites to sensors. First, travel times are gathered by using shot points and sensors. Then an optimization process begins with an initial simple model (velocity increasing monotonically with depth), is used to predict the travel times. These predictions are compared to the observed travel times, and the model is refined so that it can better match the observed data until a satisfactory solution is …

Generating Minimal T-Wise Covering Test Suites Using Constraints, Carlos A. Nieto, Martine Ceberio

COURI Symposium Abstracts, Summer 2012

Software testing is an essential part of software development that seeks quality assurance, reliability, and robustness. Unfortunately, exhaustive testing can be a very expensive, time consuming, and tedious process. With large sets of inputs, exhaustive testing can result in unpractical test suites, of size that grows exponentially with the number of input parameters.

As a way to address this growth, t-wise testing consists in focusing on test suites that only cover the interactions of the t-tuples of input parameters of the system at hand. Adding constraints further restricts the size of the test suite by limiting the possible values of …

We Need A More Professional Rental Market, Lorcan Sirr

Media

No abstract provided.

Chef Sifty, Dereck Quock

Computer Engineering

In our society today, childhood obesity has become a more prevalent problem, which needs to be fixed. Children constantly eat and snack unhealthily and parents need to understand the importance of teaching children how food affects their body and well-being. Teaching this to children at an early age will help to instill a healthy lifestyle for the child. Chef Sifty is a cooking game developed for Sifteo cubes that aims to show children the importance of nutrition while having fun. Using Sifteo’s concept of Intelligent Play, the objective of this project is to show children some healthy food and snack …

Design & Cost Analysis Of An Atv Freestyle Motocross Ramp, Thaddeus Pedro

BioResource and Agricultural Engineering

This project encompasses the final design of an improved ATV freestyle motocross ramp. The project parameters were decided on by Thaddeus Pedro. This evaluation includes an analysis of the final improved design. This report does not include any construction procedures of any kind.

Research for the project encompasses the cultural history of the freestyle motocross sport and variations of the freestyle motocross ramp. Further research includes the analysis of an existing ramp used as a basis for improvement for the new ramp. The theoretical results indicate a significant improvement in structural weight reduction and reduced material cost.

Rfid For Inventory Of Medical Records, Johny Wu

Biomedical Engineering

The purpose of this project is to explore the feasibility and economic viability of the implementation of a radio frequency identification (RFID) system in a large-scale, medical office setting. Practitioners in fields such as; medicine, chiropractic, dentistry, nursing, pharmacy, allied health, and other care providers do not have a sufficient method for tracking filing forms. RFID has the potential to reduce wait time, improve checking-in time, and decrease the possibility of interchanging documents between patients.

The purpose of this RFID system is to improve upon the filing system already in place in any office setting. The major consideration behind this …

A Guide To Producing An A Cappella Cd And Development Of A Pitch Detection Program, Jacob Ray Stringfellow

Liberal Arts and Engineering Studies

An in-depth look at the steps required to produce a CD for an a cappella group. From what microphone and preamplifiers to use, to what steps to take during the editing, mixing, and mastering processes. Finished with a look at pitch detection algorithms and how they work, and a little bit of experimentation with my own algorithm and program.

Improved Operational Limits For Offshore Pipelay Vessels, Daniel Rey Givan

LSU New Orleans Theses and Dissertations

Subsea pipelines are used extensively throughout the world’s oceans to transport oil and gas from offshore facilities to land, often hundreds of miles. These pipelines range in diameter from three to sixty inches and are installed in deeper depths every year, currently as deep as 2,900 meters. Pipeline construction and installation costs are a large percentage of offshore projects and thus, methods toward reducing costs is an imperative objective. With pipeline installation projects taking place in harsher environments, vessel operability is vital. This work presents an improved method for determining limiting criteria for pipelay operations to more effectively plan and …

Correlation Of Shear Strength Between Longitudial And Transverse Specimens, Erasto A. Fernandez

LSU New Orleans Theses and Dissertations

In this thesis, new methods for shear strength are proposed and backed up through extensive experimentation, ABAQUS models and data analysis of Titanium welds of three different alloys. The results are compared with those obtained by using the procedure outlined by AWS B4 for calculating Shear Strength in the transverse and longitudinal directions; this equation is widely used by the American Welding Society (AWS) and all those in search of more efficient designs involving welding.

It is a well-documented issue that the equation provided by AWS yields a large discrepancy between the values for shear strength of longitudinal and transverse …

Assessing The Engineering Performance Of Affordable Net-Zero Energy Housing, Jordan P. Wallpe

Purdue Polytechnic Masters Theses

The purpose of this research was to evaluate affordable technologies that are capable of providing attractive, cost-effective energy savings to the housing industry. The research did so by investigating the 2011 Solar Decathlon competition, with additional insight from the Purdue INhome. Insight from the Purdue INhome verified the importance of using a three step design process to design a net-zero energy building. In addition, energy consumption values of the INhome were used to compare and contrast different systems used in other houses.

Evaluation of unbiased competition contests gave a better understanding of how a house can realistically reach net-zero. Upon …

The Use Of Excess Aircraft As Maximization Of Resources, Jean Paul Pion Garcia

Honors Theses

The United States currently has within just 6 airfields approximately 4,600 grounded aircraft. Out of these excess aircraft, approximately 66,900 metric tons of secondary aluminum could be extracted. All this amount of material equals to approximately 147 million US dollars if sold to the current aluminum market price; the United States government could save up to 450 million US dollars just in electrical power expenses by choosing to recycle these aircraft, instead of producing primary aluminum out of bauxite. Recycling all these aircraft, would also have a positive impact in the environment, since hundreds of acres would be freed from …

A Composite Structural Steel And Prestressed Concrete Beam For Building Floor Systems, Nathan Dewit

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Precast prestressed concrete beams, such as rectangular and inverted tee beam, currently used in residential and commercial buildings are deep, heavy, and limited to span-to-depth ratios of 15. The research proposes a composite structural steel and prestressed concrete beam that is shallow, light, easy to produce and erect, and able to achieve a span-to-depth ratio of 24. The proposed beam is designed to be used with precast columns, hollow-core planks, and a cast-in-place topping to create a moment-resisting floor system that minimizes the need for shear walls. The goal of this system is to eliminate as many of the limitations …

Defining Industry Expectations And Misconceptions Of Art And Technology Co-Creativity, Vanessa C. Brasfield

Department of Computer Graphics Technology Degree Theses

The primary purpose of this study was to establish whether or not students and industry professionals share the same views about what students should be learning in animation education, what skills are necessary, and whether or not students graduating with a bachelor’s degree would be adequately prepared for an entry level position. To establish where misconceptions lie, surveys were issued to three groups: undergraduate students, post-graduate students, and industry professionals. These surveys were then analyzed using paired t-test for validation and question relevance, and ANOVA models to establish whether or not groups shared viewpoints. These data established significance within the …