Other Engineering Commons^™

The Drag Language, Weixi Ma

Theses and Dissertations--Computer Science

This thesis describes the Drag language. Drag is a general purpose, gradually typed, lexically scoped, and multi-paradigm pro- gramming language. The essence of Drag is to build the abstract syntax trees of the programs directly and interactively. Our work includes the language specification and a prototype program. The language specification focuses on the syntax, the semantic model, and the type system. The prototype consists of an interactive editor and a compiler that targets several plat- forms, among which we focus on the LLVM platform in this thesis.

Routing And Security In Mobile Ad Hoc Networks, Baban A. Mahmood

Theses and Dissertations--Computer Science

A Mobile Ad hoc Network (MANET) consists of a set of nodes which can form a network among themselves. MANETs have applications in areas such as military, disaster rescue operations, monitoring animal habitats, etc. where establishing fixed communication infrastructure is not feasible. Routing protocols designed for MANETs can be broadly classified as position-based (geographic), topology-based and hybrid. Geographic routing uses location information of nodes to route messages. Topology-based routing uses network state information for route discovery and maintenance. Hybrid routing protocols use features in both position-based and topology-based approaches. Position-based routing protocols route packets towards the destination using greedy forwarding …

Improving Cooling Tower Chemistry Control And Cost Savings Through Automation, Ryan Matthew Maxwell

Theses and Dissertations

Proper chemistry control of cooling towers reduces corrosion, biological growth, and precipitation of solids. Therefore, improving control can lead to increased equipment life, operating efficiency, and safety. Chemistry of cooling towers is highly dependent on loading, weather, and time. As such, cooling tower chemistry varies day to day and even hour to hour, requiring either continuous controls or large operating bands. Through automation, 24/7 monitoring and control can be achieved, allowing for deliberate operation within tight operating bands. As a direct result of automation water consumption has been reduced by 9.1 million gallons per year, CL-49 use has been reduced …

A Prediction Method For Overall Economic Value Of Fault Detection And Diagnostic Tools For Rooftop And Split Systems, David Yuill, James Braun

Durham School of Architectural Engineering and Construction: Faculty Publications

Fault detection and diagnostics (FDD) tools for air-conditioning application may perform well or poorly, but it is difficult to characterize this performance in a meaningful way. Some recently proposed evaluation techniques have provided various statistics to characterize FDD performance, but these results can be difficult for a potential adopter of FDD to understand. A new method of characterizing FDD performance by predicting the overall economic value of the FDD tool is proposed in this paper. It is applicable to FDD tools intended for air-cooled unitary airconditioners, such as rooftop units (RTU) and split systems. The method gives an estimated dollar …

3d Seismic Structural And Stratigraphic Interpretation Of The Tui-3d Field, Taranaki Basin, New Zealand, Gorkem Yagci

Masters Theses

"Identifying seismic structures and stratigraphy are important for exploration of hydrocarbons. The purpose of this study is to discover seismic structural and stratigraphic features and to utilize the results for interpreting depositional environments. A 3D seismic dataset from the Tui-3D Field, the Taranaki Basin, New Zealand with well data were used to visualize structures, to detect stratigraphic features, to identify main lithology, to understand depositional environment, and to describe seismic facies and reflection patterns of the target horizons. The major formations are in the Kapuni Group.

Seismic structural interpretation indicates thirty-two minor faults, which may play an important role in …

Developing Equations For Estimating Reference Evapotranspiration In Australia, Matin Ahooghalandari, Mehdi Khiadani, Mina Esmi Jahromi

Research outputs 2014 to 2021

Quantifying reference evapotranspiration (ET₀) is essential in water resources management. Although, many methods have been developed with different level of accuracy, in this study, two new equations were developed and optimized for estimating ET₀ using Honey-Bee Mating Optimization (HBMO) algorithm. The firs eq. estimates ET₀ from extraterrestrial radiation (R_a), relative humidity (RH) and mean daily temperature (T_mean), while the second uses the same parameters except that mean daily temperatures is replaced with maximum daily air temperature (T_max). Both equations were developed using climatic data from eight weather stations in Western …

Use Of Bridging Strategy Between The Ensemble Kalman Filter And Particle Filter For The Measurements With Various Quasi-Gaussian Noise, Sumathi Prabhakaran Jeyakumari

All Graduate Theses, Dissertations, and Other Capstone Projects

Filtering and estimation are two important tools of engineering. Whenever the state of the system needs to be estimated from the noisy sensor measurements, some kind of state estimator is used. If the dynamics of the system and observation model are linear under Gaussian conditions, the root mean squared error can be computed using the Kalman Filter. But practically, noise frequently enters the system as not strictly Gaussian. Therefore, the Kalman Filter does not necessarily provide the better estimate. Hence the estimation of the nonlinear system under non-Gaussian or quasi-Gaussian noise is of an acute interest. There are many versions …

Normalized Effect Of Condenser Fouling And Refrigerant Charge On Performance Of Vapor Compression Air Conditioning Systems, Mehdi Mehrabi, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Several laboratory experiments have studied the effect of faults on vapor compression cycle air-conditioning systems. There has been a particular focus on refrigerant charge variation, which is believed to be quite common in air conditioners, and a lesser focus on heat exchanger fouling. The majority of the published results evaluate the fault effects on particular system operating parameters in one unit. For example, the effect on capacity and efficiency are typically evaluated. The results differ from one study to the next. The current paper summarizes the effects for all of the results available in the literature for condenser fouling and …

Student Absenteeism And The Comparisons Of Two Sampling Procedures For Culturable Bioaerosol Measurement In Classrooms With And Without Upper Room Ultraviolet Germicidal Irradiation Devices, Chunxiao Su, Josephine Lau, Shawn G. Gibbs

Durham School of Architectural Engineering and Construction: Faculty Publications

Upper room ultraviolet germicidal irradiance (UVGI) has been shown to reduce the concentration of bioaerosols in controlled chambers. However, there is a lack of experimental results on the reduction of bioaerosol concentrations by UVGI devices in actual uncontrolled buildings. This study was carried out in an American elementary school in the Midwest. Two sampling procedures were carried out in six selected classrooms with similar dimensions that were separated into two groups: (1) UVGI exposure group and (2) non-UVGI control group. Two-stage Tisch culturable impactors were utilized to collect airborne culturable bacteria and fungi. Monthly samples were collected during unoccupied period …

The University Of Akron Human Powered Vehicle Team, Maria E. Rizzo, Andrew J. Derhammer, Christopher M. Trowbridge, Timothy M. Nutt, Joseph R. Boyd, Jeremy W. Marcum, Jonathan E. Adams, Donald G. Haiss, Julia Wood, Brian D. Goshia, Scott T. Fagan, Joshua D. Everhard, Rebecca L. Slivka

Williams Honors College, Honors Research Projects

The University of Akron Human Powered Vehicle Team’s 2016 vehicle, Klokan, was designed, manufactured and tested with safety, reliability, performance and ease of use in mind. The vehicle is a fully faired tadpole trike with a lightweight aluminum frame constructed from 6061-T6 tubing having a total weight of 8.9 lbs. To complement the lightweight frame, the fairing is constructed from polycarbonate, PETG and carbon fiber strips which combine into a lightweight, easy to manufacture weather barrier and aerodynamic structure. Klokan was designed to be a safe and efficient mode of everyday transportation which ensures that riders are sufficiently protected by …

Diffusive Behavior Of Physically Cross-Linked Hydrogels, Morgan A. Stilke

Williams Honors College, Honors Research Projects

A hydrogel is a water swollen polymeric network that has the potential to transform a variety of biomedical applications because of its biocompatibility and water content. Unfortunately, hydrogels typically have poor mechanical robustness. The majority of the content is water, while the remaining structure consists of a physical network, a covalent network, or a combination of both, yielding strength and toughness. There are several strategies attempted to improve mechanical properties including double network hydrogels comprised of two interpenetrating networks: one being a highly crosslinked sacrificial network and the other being a weakly crosslinked network that maintains reversibility after deformation. However, …

Fault Detection And Diagnosis Process For Oversizing Design On Multiple Packaged Air-Conditioning Units, Denchai Woradechjumroen, Haorong Li, Thanapat Promwattanapakee

Durham School of Architectural Engineering and Construction: Faculty Publications

Heating, ventilation, air-conditioning and Refrigeration (HVAC&R) systems are seldom designed or commissioned properly. The situation leads to abrupt or degradation faults resulting in inefficient energy uses, excessive energy consumption and high service costs. To solve these aforementioned problems, fault detection and diagnosis (FDD) is utilized to firstly detect any abnormal conditions of a system and then diagnoses and determines their causes. In order to apply this concept in HVAC oversizing designs, this paper proposes the state-of-art procedure of a FDD procedure for analyzing the inherently faulty design (oversizing) of multiple packaged air-conditioning units used to supply cooling for an open …

Compressor Having A Control And Dagnostic Module, Hung M. Pham, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An apparatus includes a Voltage sensor, a current sensor, and a controller. The Voltage sensor measures Voltage values of alternating current power Supplied to a capacitor. The capaci tor is electrically coupled to a compressor. The current sensor measures current values of the alternating current power. The controller is configured to receive the Voltage values and the current values. The controller is configured to determine a first power factor value based on at least one of the voltage values and at least one of the current values. The controller is configured to selectively detect a first capacitor fault in response …

Corrosion Protection Systems In Offshore Structures, Hristo Ivanov

Williams Honors College, Honors Research Projects

Corrosion plays a pivotal role in the engineering world. Engineers of all disciplines must consider the dangers that this phenomenon can incur. Interestingly, corrosion mitigation is not a topic that is addressed in most academic curricula. The goal of this paper is to give engineering students a brief introduction into corrosion and some of the prevention techniques commonly used today.

The design of a corrosion protection system for offshore structures is discussed in order to illustrate how these techniques can be utilized even in the most extreme environments. First, the driving force behind corrosion is examined, introducing the basic mechanics …

Life-Cycle Analysis Of A Cement Manufacturing Plant Co-Firing Hazardous Waste In The Usa, Stephen P. Holt

Theses and Dissertations

The purpose of this work was to determine the overall environmental impacts associated with the co-firing hazardous waste by burning in a cement kiln to replace the use of coal in the cement manufacturing process. This environmental assessment was conducted using LCA methodology. Understanding the environmental impacts associated with burning hazardous waste in a cement factory could help shape national environmental policy, regulations and the need for site specific human health risk assessments in the environmental regulatory permitting processes. Accordingly, the primary objective of this study was to evaluate the environmental impacts from the hazardous waste burning for energy recovery …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Exploring Emerging Technologies For The Built Environment Circa 2015 For Use In Architectural Engineering And Related Majors, Connor J. Hanlon

Architectural Engineering

For this senior project I am seeking to combine my knowledge of Structural Engineering with Construction Management. For this task, I have decided to look at Building Information Modeling (BIM). In this project I investigate the BIM tools Trimble Tekla Structures and Autodesk Navis- works Manage. Tekla is a modeling, fabrication, and design program. Navisworks is a visualiza- tion and Clash Detection tool. For this project I have identiÅied two main goals relating to Navis- works and Tekla:

1. Create content to allow students and professors learn how to use Tekla and Navisworks

2. Determine the capabilities of these softwares, and Åigure …

   ---

   Go to article

Subjective Perception Of Varying Reflection Densities In Room Impulse Responses, Hyun Hong

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Reverberation time (RT) is a metric commonly used to describe room acoustic conditions, but different rooms which have the same reverberation time can have different reflection densities. Much less is known about how humans perceive different reflection densities and how sensitive humans are to changes in reflection density. Previous investigations in the existing literature have studied the upper limit of distinguishable reflection density using artificial impulse responses, but not with more realistic impulse responses simulated in room acoustic software or measured from real rooms. The aim of this dissertation is to investigate methods for quantifying reflection density from measured impulse …

Background Differences In Baseline And Stimulated Mmp Levels Influence Abdominal Aortic Aneurysm Susceptibility, Matthew A. Dale, Melissa K. Suh, Shijia Zhao, Trevor Meisinger, Linxia Gu, Vicki J. Swier, Devendra K. Agrawal, Timothy Greiner, Jeffrey S. Carson, B. Timothy Baxter, Wanfen Xiong

Department of Mechanical and Materials Engineering: Faculty Publications

Objective: Evidence has demonstrated profound influence of genetic background on cardiovascular phenotypes. Murine models in Marfan syndrome (MFS) have shown that genetic background-related variations affect thoracic aortic aneurysm formation, rupture, and lifespan of mice. MFS mice with C57Bl/6 genetic background are less susceptible to aneurysm formation compared to the 129/SvEv genetic background. In this study, we hypothesize that susceptibility to abdominal aortic aneurysm (AAA) will be increased in 129/SvEv mice versus C57Bl/6 mice. We tested this hypothesis by assessing differences in aneurysm size, tissue properties, immune response, and MMP expression.

Methods: Mice of C57Bl/6 or 129/SvEv background underwent AAA induction …

Using Basic Quality Tools To Improve Production Yields And Product Quality In Manufacturing, Steve E. Black

Electronic Theses and Dissertations

As the U.S. and world economies emerge from years of recession, the hardwood flooring market is currently enjoying strong growth. With this growth come new challenges for hardwood flooring manufacturers. Strong competition from foreign markets and rising log prices are reducing product margins and forcing companies to think lean, while improving product quality.

QEP Wood Flooring division, who struggled through the worst of the U.S. economic down turn is now regaining ground as a strong competitor in the hardwood flooring market. This turnaround is due to internal changes to decrease waste and increase product quality. This is accomplished by using …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

A Comparative Study Between The Karst Of Hoa Quang, Cao Bang Province, Vietnam And Tuscumbia, Alabama, U.S.A., Gheorghe M. Ponta, Nguyen Xuan Nam, Florentin Stoiciu, Ferenc L. Forray, Viorel Badalita, Lenuta J. Enache, Ioan A. Tudor

Sinkhole Conference 2015

Some of the most beautiful karst features created by the dissolution of limestones are residual hills with steep or vertical sides rising from a flat plain, known as tower karst. Tower karst to be developed requires a “mean annual temperature of minimum 170C to 180C and 1,000 to 1, 200 mm/m2 of annual rainfall (Jakucs, 1977). Two sites matching this criteria were selected: the karst of Hoa Quang District, Cao Bang Province, Vietnam, and Tuscumbia, Colbert County, Alabama, U.S.A. Preliminary observations regarding similarities and differences between these two sites are presented in this paper. The Hoa Quang karst area is …

Concepts For Geotechnical Investigation In Karst, Joseph A. Fischer, Joseph J. Fischer

Sinkhole Conference 2015

There seems to be a lack of recognition in the literature that addresses the variety of karst in the United States of America and some of its offshore territories. For example, there are the well-known solutioned carbonates of Florida and the Caribbean, but there are also the somewhat older, harder carbonates of St. Croix, U.S.V.I. Even Florida’s recently deposited karst varies from region to region. There are also the ancient, flat-lying carbonates of the interior craton that often have semi-horizontal cavities resulting from variations in ground water levels affecting bedding and the contorted rocks of the Appalachians with its apparently …

Linear Mode Cmos Compatible P-N Junction Avalanche Photodiode For Smart-Lighting Applications, Md. Mottaleb Hossain

Optical Science and Engineering ETDs

There is a need in emerging smart lighting concepts for a high-speed sensing capability to enable adaptive lighting (smart spaces) and visible light communication. One approach to address this need is to design and manufacture a novel complementary-metal—oxide—semiconductor (CMOS) compatible, cost-effective detector array and readout circuit (ROIC) that incorporates integrated waveguide detectors and avalanche photodiodes (APDs). This thesis focuses on the APD design and fabrication component of the sensing capability required by smart-lighting systems. Silicon CMOS compatible APDs are expected to provide high-speed and high-sensitivity sensors in terms of simplicity of design, low power consumption and cost-effectiveness for smart-lighting applications. …

Precise Characterization And Investigation Of Laser Cooling In Iii-V Compound Semiconductors, Chengao Wang

Optical Science and Engineering ETDs

The physics and engineering issues associated with laser cooling of III-V compound semiconductors, in particular GaAs double heterostructures (DHS), are theoretically and experimentally investigated. This research addresses the key concepts of external quantum efficiency (EQE) and parasitic background absorption in a semiconductor laser cooler. The external quantum efficiency describes how well recombination radiation is removed from the cooling device and is precisely measured by All-optical Scanning Laser Calorimetry (ASLC). Using this technique, a record external quantum efficiency of 99.5% has been obtained with a GaAs laser cooler held at 100 K. However, high background absorption has hindered the observation of …

A Method For Visualizing Poetic Texts Using L-Systems (L-Sisŭt'em Ŭl Iyonghan Si T'Eksŭtŭ Sikakhwa Pangbŏp L시스템을 이용한 시 텍스트 시각화 방법), Wayne De Fremery, Jusub Kim

Barowsky School of Business | Faculty Patents

본 발명은 시 텍스트 시각화 방법에 관한 것으로, (a) 시각화 장치에 입력된 시의 텍스트를 순서대로 스캐닝하는 단계; (b) L 시스템 모델을 통해 상기 시의 구조를 식물의 구조와 매칭시키고, 상기 텍스트의 형태소 및 모음을 식물의 채도와 명도와 매칭시켜 컴파일링 하는 단계; (c) 컴파일된 상기 텍스트의 명령어에 따라 렌더링하여 페인팅하고, 상기 식물의 그림을 생성하는 단계; 및 (d) 생성된 상기 그림을 상기 시각화 장치의 표시창에 표시하는 단계를 포함한다.이와 같이 본 발명은 시 텍스트의 시각화에 정보 전달 기능 외에 심미성을 부가하여 시각화 결과 자체가 엔터테인먼트적인 요소를 가지고 가며 직관적인 영감까지 줄 수 있는 창작물이 되도록 하는 새로운 시각화 방법을 제공한다.

The invention relates to …

A Concept Validation Of A Magnetometry-Based Technology For Detecting Concealed Weapons In Vehicle Door Panels, Nar Vang

Master's Theses

Acts of insurgency have become an increasing threat resulting in extensive measures being taken by the law enforcement authorities to mitigate their devastating effects on human life and infrastructure. This thesis introduces a magnetometry-based information, and signal processing methodology for detecting concealed ferrous objects in vehicle body panels. From extensive literature research, it was observed that while magnetic sensors have been used in a variety of related applications, but they have not been extensively applied to the on-road detection of firearms and explosives concealed in vehicles. This study utilized an extensive experimental protocol for preliminary concept validation. The main idea …

Imaging Device, Wayne De Fremery, John Young

Barowsky School of Business | Faculty Patents

An imaging device comprising a flexible sensor attached to a control case. The flexible sensor provides both a source of illumination to the image being captured and a method of capturing the image. The method of capture comprises a field of reactors disbursed across the facial area of the sensor, the output of which produces a dot-pattern capture of the intended image which is passed to a storage device.

Thermal Energy Storage In Building Integrated Thermal Systems: A Review. Part 2. Integration As Passive System, Dervilla Niall, Sarah Mccormack, Philip Griffiths, Luisa Cabeza, Lidia Navarro, Albert Castell, Alvaro De Grazia, Maria Brown

Articles

Energy consumption trends in residential and commercial buildings show a significant increase in recent decades. One of the key points for reducing energy consumption in buildings is to decrease the energy demand. Buildings envelopes are not just a structure they also provide protection from outdoor weather conditions always taking into account the local climate. Thermal energy storage has been used and applied to the building structure by taking advantage of sensible heat storage of materials with high thermal mass. But in recent years, researchers have focused their studies on the implementation of latent heat storage materials that if well incorporated …

20150709: Department Of Engineering, 2008, College Of Engineering And Computer Sciences

Guides to University Archives

These items include materials from Engineering at Marshall University from 2008. Items were received in 2015 and include notable materials from or about the History of Engineering Department at Marshall University among other support and presentations about Engineering at Marshall and enrollment information. This is not an exhaustive list. Please download the finding aid for a full list of contents.