Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Comparison Of The Disaster™ Scheduling Software With A Simultaneous Scheduling Algorithm For Minimizing Maximum Tardiness In Job Shops, Barak J. Carlson, Christopher A. Lettiere

Theses and Dissertations

The Theory of Constraints (TOC) is the foundation for a computerized scheduling system called DISASTER. Although this system has proven successful in many manufacturing settings, it has potential limitations due to the sequential heuristic process by which it schedules constraints. The objective of this thesis was to determine the extent to which these limitations impact the due date performance of schedules created by DISASTER. This objective was addressed by developing an algorithm to simultaneously schedule multiple constraints in a job shop environment and provide the optimal schedule for minimized maximum tardiness. This algorithm was used to obtain solutions for a …

Schedule Estimating Relationships For The Engineering And Manufacturing Development Of Bomber, Transport, Tanker And Surveillance Aircraft Systems, D. Scott Boyd, Brian D. Mundt

Theses and Dissertations

This study developed parametric schedule estimating relationships (SERs) for the engineering and manufacturing development (EMD) phase for nontactical aircraft systems. The potential value of this nontraditional approach to estimating schedule duration has been established by previous applications to tactical aircraft, air-launched munitions, and office buildings. Prior research suggested acquisition strategy parameters to be significant schedule drivers. For this study, data on EMD milestone dates and potential schedule drivers were collected on 56 bomber, transport, tanker, and surveillance aircraft systems. Several SERs were developed for these systems using linear regression analysis. The EMD phase was divided into subphases based on significant …

Benchmark Production Scheduling Problems For Job Shops With Interactive Constraints, Stewart W. James, Bruno A. Mediate Jr.

Theses and Dissertations

United States Air Force (USAF) depots have expressed interest in utilizing DISASTER production scheduling software to schedule their maintenance operations. DISASTER attempts to increase system throughput by building effective schedules for system, constraint resources. However, when a system contains multiple, interactive constraints, DISASTER builds the constraint schedules one at a time. Since each successive schedule must adhere to timing restrictions imposed by previous constraint schedules, the quality of the schedules produced by DISASTER is dependent upon the sequence in which the constraints are scheduled. This thesis first developed a set of benchmark problems which provide a diversity of scheduling scenarios. …

An Investigation Of Integrated Product Development Teams Of The F-22 Program, Gary F. Wagner, Randall L. White

Theses and Dissertations

This study investigated Integrated Product Development (IPD) at the F-22 System Program Office (SPO). A literature review revealed the key IPD characteristics of organizational structure, communication, intense up-front planning, training, integrated management tools, and lessons learned. The research method was twenty-two personal interviews of SPO subjects selected from four IPD teams, the front office, and functional support divisions. Key findings included an emphasis on up-front planning to establish an organizational and contractual structure which empowered workers to develop their products. Also, constant communication with all other functions and teams was stressed while training was primarily done while transitioning to IPD. …

A Dynamic Part Assignment Procedure In Machine Cell Formation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

A major contributing factor to the under utilization of machines in cellular manufacturing is the development of long queues in front of some machines in machine cells. This paper presents a procedure which identifies such machines and redistributes their loads to alternative machines whenever feasible.

Research And Development Project Selection Tools: Probing Wright Laboratory's Project Selection Methods And Decision Criteria Using The Lateral Airfoil Concept, James E. Barger

Theses and Dissertations

This research accomplished three major tasks. First it examined familiarity and usage rates for fifteen published R&D project selection methods in the context of a larger general issue, the Air Force's ability to develop and exploit technology. Wright Laboratory served as the focus for the research effort and displayed a greater tendency to use formal methods in 1993 than was shown in prior research. The laboratory's overall preference for simpler models like Checklist, Scoring, and Sorting led to a recommendation that authors familiar with the other techniques communicate them in engineering and management vernacular. Secondly, the study introduced a technological …

A Multivariate Quality Control Approach For Automated Manufacturing Systems, Hisham Naim Ashur

Engineering Management & Systems Engineering Theses & Dissertations

In today's competitive manufacturing environment, effective and practical statistical quality control approaches are essential. A successful process control approach needs to provide on line real time monitoring of quality related characteristics.

No longer acceptable is an approach that analyzes quality related data only after the product is produced. A statistical process control approach that monitors the process during production and that reports trouble spots before bad products are made is necessary in an automated manufacturing environment.

An automated manufacturing environment is characterized by high volume production runs and short production cycles. Traditional statistical process control approaches are not capable of …

A Computer-Based Strategy To Facilitate Organizational Learning Process, Charles B. Keating

Engineering Management & Systems Engineering Theses & Dissertations

This research investigated the development of Organizational Learning Process (OLP) through the application of a computer-based strategy in an organizational setting. OLP is developed from the organizational learning literature as an integration of similar concepts of organizational processes of inquiry essential to organizational learning. These concepts included: organizational dialectic (Argyris and Schon 1978), surfacing and testing mental models (Senge 1990a,1990b), and interpretation process (Daft and Weick 1984). A qualitative research methodology was developed within a participatory action research framework (Whyte 1989). A six phase research project, designed as a computer-based strategy to generate OLP, was applied in an organizational setting. …

Development And Testing Of Locally Produced Natural Rubber (Nr) And Pvc Blends, B Mutagahywa

Tanzania Journal of Engineering and Technology (TJET)

The mechanical properties of natural rubber - poly(vinyl chloride) blends have been studied. Tensile and tear strengths of the vulcanizates has been shown to increase with increasing proportions of PVC up to about 20 pphr. Abrasion loss and hardness decreases slightly with increasing concentration of PVC. Increased loading Of carbon black lowers the tensile and tear strength while increasing the abrasion loss and hardness values. This may be explained by the fact that PVC exists as a discontinuous rigid phase in the polymer compound. At normal loading of black (37 pphr) PVC improves processability and acts in the same way …

Optimum Design For Spring With Orthogonal Design Method, Han Fu - Jie

Tanzania Journal of Engineering and Technology (TJET)

Orthogonal design method is a sort of direct optimum method, by which the op- timal result may be obtained through simple computation and analysis. This method has gained increasingly extensive interest in scientific research, engineering design, end production management as well. The orthogonal table is the basic instrument for carrying out optimum design with orthogonal design method. It is a mathernatical table established On the basis Of the idea of isostatic distribution. As various levels may appear in any column, it makes a partial experiment contain levels of all factors furthermore. RII combina- tions of any two columns may appear …

Antecedents, Moderators And Outcomes Of Organizational Commitment, Beatus Kundi

Tanzania Journal of Engineering and Technology (TJET)

This study examined: (I) the impact of the BtruCturaI of tenure, job integration and organizational support on organizational (2) the mediating roles of the cultural values for performance and collectivity, and the intra—individual factorg of organizational identification and the norm of reciprocity Ln the relationahip between the structural factore and organization coamitment; and, (3) the relationghip between organizational cormitment and the ouecome variablen Of abøeneeeigm, turnover and The Bhow that job and Of the for performance a gignificant facilitator of the effecte Of the etructuraL factors on commitment; and organization identification and the norm of rec are important linkø in …

A Probabilistic Model And A Software Tool For Avcs Longitudinal Collision/Safety Analysis, H.-S. Jacob Tsao, Randolph Hall

Faculty Publications

This paper develops a probabilistic model and a software tool for analyzing longitudinal collision/safety between two automated vehicles. The input parameters are the length of the gap between the two vehicles, the common speed prior to the failure, the reaction delay of the following vehicle and a bivariate pint distribution of the deceleration rates of the two vehicles. The output includes the probability of a collision and also the probability distribution of the relative speed at collision time.We will use this model to compare the safety consequences associated with the platooning and "free-agent" vehicle-following rules. We will also demonstrate that …

Simulation Model For Predicting The Impact Of Progressive Diseases In The U.S. Population By Tracking, Biju Suseelan

Masters Theses

Computer Aided Simulation is the process of designing a mathematical-logical model of a real system and experimenting with this model on a computer. Simulation encompasses a model building process as well as the design and implementation of an appropriate experiment involving that model. A simulation experiment involves observing the dynamic behavior of a model by moving from state to state in accordance with well-defined operating rules designed into the model. This research contains the development of a novel approach for the HIV transmission dynamics by using computer simulation to track the HIV positive individuals in a population and to determine …

A Sociotechnical Approach To The Study Of Semiautonomous Work Group Communication In Technical Organizations, Elizabeth B. Varnes

Engineering Management & Systems Engineering Theses & Dissertations

The sociotechnical aspects of group communication in semiautonomous technical work teams were investigated to understand how team members define "effective" group communication and what impact technical tools have on the group communication process. A team of workers with various technical backgrounds was selected for study. The study involved videotaped group sessions, a group training educational briefing and individual group member questionnaires. The results indicate that group members believed sharing information among group members was critical to successful communication and that certain technical tools could be effective during group meetings. The findings are congruent with the general theory that group communication …

Simulation Study For The Effect Of Dependencies In Queueing Systems, Yitao Bai

Theses

Few theoretical results have been obtained in the literature for the effects of dependencies between random variables on the performance of queueing systems. This thesis aims at investigating this issue via simulation. Several dependencies are studied in detail, including dependencies between interarrival times, between interarrival time and service time, between service times and dependencies between different stages in networks of queues. We define several classes of dependent random variables and study their correlation coefficients, then we apply them to single and multiple station service systems. Comparisons with the independent case, for which the explicit form solution are available, are made …

Measures For Estimating The Need For Flexibility In A Manufacturing Facility, Raghu Chilukuri

Theses

Manufacturing technology is in the midst of on-going developments stemming from rapid improvements in machine tools, computers and robots. These developments present engineers with greater challenges and opportunities in designing more complex and productive systems. The concept of flexibility was defined by authors like Jaikumar, Son & Park, and Buzacott. The various challenges can be partly over come by building flexibility into the various systems. Various operational or raw measures are described as they help managers to understand the kind and extent of flexibility embedded in their production process and allow them to make informal judgement on new equipment.

Various …

The Use Of A Factory Simulation To Evaluate A Flexible Control Structure For Integrated Manufacturing, Ling Ling Pan

Engineering Management & Systems Engineering Theses & Dissertations

Once a control structure for an integrated manufacturing system is decided upon, manufacturing activities are limited by that structure. A flexible control structure is presented as an approach for accommodating a variety of manufacturing activities, without being limited to a single control structure. A flexible control structure is one that allows multiple types of control structure in the manufacturing process. For example, both hierarchical and non-hierarchical structures may be used in a flexible structure. The properties of a flexible control structure are discussed from the point of view of graph theory.

Control structures for automated manufacturing are difficult to evaluate …

Introduction To Intellisim 2.0, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

IntelliSIM is a prototype for a new generation of knowledge-based simulation tool that has been developed by the Systems Simulation Laboratory at Arizona State University. This tool is a computer environment that allows non-simulation trained modelers to predict the performance of a manufacturing system for which the necessary data is available. The system provides predictive data on such items as throughput time, queue levels, equipment utilization, reactions to machine failures, etc. With IntelliSIM, the benefits of discrete-event simulation can be exploited without requiring the high level of expertise necessary to successfully conduct a sound simulation study. The approach offered with …

Diffusion Of Total Quality Management: An Organizational Self-Production Perspective, Baizhong Zhao

Engineering Management & Systems Engineering Theses & Dissertations

American industries are in the process of a quality revolution. Most companies are busy implementing Total Quality Management (TQM) programs. However, the experience of both Japanese and American companies indicates that successful TQM implementation depends on an understanding of implementation processes, which itself relies on an understanding of organizational self-organizing, for it is through this process that TQM gets diffused and becomes a core component of an organization's culture. Self-organizing is a so-called process-oriented approach, based on theory from cybernetics (Ashby, 1962; Steier & Smith, 1985; von Foerster, 1960), dissipative structure theory (Prigogine & Stengers, 1984), and chaos theory (Gleick, …

Multidimensional Approach To Implementation Of Continuous Process Improvement Utilizing Small Run Analysis In A Shipyard Environment, Paul Ray Hollandsworth

Engineering Management & Systems Engineering Theses & Dissertations

Nationally, both public and private shipyards are experiencing a high rework rate (over 40%) in the fabrication of plug connectors used for electronic systems onboard Navy vessels. The shipyard's survival depends on acquiring the elements necessary to maintain a major industry in a position of continuous improvement that produces a better product than their competitors, at less cost, in a safe manner, and on schedule.

This research addresses the complex problem of how to introduce quality control methodologies within a job shop environment that assists in identifying variables that influence the rework rate of plug fabrication process over a four …

An Integrated Simulation Model Development Environment For Slam Ii Using Object-Oriented Paradigm, Rizvan Erol

Masters Theses

An integrated simulation model development environment was implemented to assist the modeler by automating certain activities of simulation modeling. The system included interactive model definition, experimental design, automatic simulation program generation in SLAM II. Object-oriented paradigm at software development stage was extensively used to conceptualize the structure, and rules of the SLAM II language in order to generate efficient, and modular program code. The present system targeted modeling of various probabilistic inventory control system problems. The remarkable advantages of the system were rapid model development time, and achieving reliable program code without requiring any knowledge in SLAM II. Object-oriented programming …

The Adaptation Of The Sei's Capability Maturity Model To The Air Force Software Acquisition Management Process, William G. Dickerhoff Jr., William J. Sommers

Theses and Dissertations

This study develops an Air Force Software Acquisition Maturity Framework (SAMF) by adapting the Software Engineering Institute's (SEI) capability Maturity Model (CMM) to the Air Force software acquisition process. The SAMFs purpose is to provide the Air Force Materiel Command's product centers and program off ices with criterion to assess their software acquisition maturity in a similar fashion as the SEI's CMM provides companies a benchmark to measure their organization's software production maturity. The research was accomplished through a combination of information gathering techniques and data analysis. A literature search of documentation, both within and external to the Department of …

Artificial Neural Networks For Robotics Coordinate Transformation, Stephen Aylor, Luis Rabelo, Sema E. Alptekin

Industrial and Manufacturing Engineering

Artificial neural networks with such characteristics as learning, graceful degradation, and speed inherent to parallel distributed architectures might provide a flexible and cost solution to the real time control of robotics systems. In this investigation artificial neural networks are presented for the coordinate transformation mapping of a two-axis robot modeled with Fischertechnik physical modeling components. The results indicate that artificial neural systems could be utilized for practical situations and that extended research in these neural structures could provide adaptive architectures for dynamic robotics control.

Automatic Recognition Of Tool Wear On A Face Mill Using A Mechanistic Modeling Approach, Daniel Waldorf, Shiv G. Kapoor, Richard E. Devor

Industrial and Manufacturing Engineering

A strategy is developed for identifying cutting tool wear on a face mill by automatically recognizing wear patterns in the cutting force signal. The strategy uses a mechanistic model development to predict forces on a lathe under conditions of wear and extends that model to account for the multiple inserts of a face mill. The extended wear model is then verified through experimentation over the life of the inserts. The predicted force signals are employed to train linear discriminant functions to identify the wear state of the process in a manner suitable for on-line application.

The Performance Of A Horizontal Flow Roughing Filter/Slow Sand Filter Water Treatment Plant In Tanzania, Mbwette T. A

Tanzania Journal of Engineering and Technology (TJET)

The performance of a water treatment plant comprising of the Horizontal f Iow Roughing F i Iter (HRF) / Slow Sand Filter (SSF) System was evaluated by monitoring the water quality of the inlet water and the plant filtrates for a Improper operational procedures and period of two months. the absence of adequate maintenance of the plant was found to have resulted to relatively Iow removal efficiency. This subsequently improved as a result of plant rehabilitation and introduction of new operational procedures and became comparable to the performance of HRE/SSF plants documented in literature. For example, as a result of …

Introduction To Intellisim 1.0, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

IntelliSIM is a prototype for a new generation of knowledge-based simulation tool that has been developed by the Systems Simulation Laboratory at Arizona State University. This tool is a computer environment that allows non-simulation trained modelers to predict the performance of a manufacturing system for which the necessary data is available. The system provides predictive data on such items as throughput time, queue levels, equipment utilization, reactions to machine failures, etc. With IntelliSIM, the benefits of discrete-event simulation can be exploited without requiring the high level of expertise necessary to successfully conduct a sound simulation study. The approach offered with …

Design For Quality Manufacture : Formulation Of The Macro Architecture For A Dfqm Methodology, Shrad Prasad

Theses

The focus of the available techniques in concurrent engineering for the development and improvement of the design of a product, has been in the areas of product assemblability and manufacturability. These techniques are concerned with the reduction of the cost associated with the manufacture and handling of the product.

The Design For Quality Manufacturability focuses on the quality manufacturability issue of the product design. A macro architecture is developed for the introduction of a new methodology to evaluate designs based on the quality manufacturability of these designs. A set of defects occurring at the assembly stage of the manufacture of …

Clustering Algorithm For Local Area Network Design In A Cim Environment, A. C. Manjunath

Theses

Communication systems have come to be regarded as being one of the most important aspects in manufacturing enterprises in recent years. It continues to offer enormous potential for improving the efficiency of manufacturing enterprises through Computer Integrated Manufacturing (CIM). It is true however that this potential cannot be realized by developments on the communications front alone. Strategic and economic considerations in installing a communications system in a manufacturing environment is of vital significance.

This thesis, at the outset attempts to bring out some of the issues in the area of communications (research), specifically in relation to CIM. A perception of …

Computational Simulation Of Flow Through Elbows In The Approach Piping Systems To A Headbox, Kasinathan Ramanathan

Masters Theses

The successful operation of the wet end in a paper machine is highly dependent on the approach piping system. Sheet basis weight stability and ease of making wet end adjustments are greatly impaired by improperly designed approach piping systems. Most problems in headbox approach piping occur when the flow splits, combines, and passes through elbows.

Elbows create cross flows, flow separation, and eddies, and play an important role in the uniform and stable delivery of the pulp into the headbox. The effect due to an elbow lasts for a considerable distance downstream of the elbow and is severe when two …

The Indentation Of Foam Pattern Surfaces By Coordinate Measuring Machine Probes, Sanjay Nenawati

Masters Theses

When coordinate measuring machines are used to measure the complex shapes of foam patterns, the spherical probe tips indent into the soft surface of the pattern. Such indentation represents a measurement error since the indicated dimension will not be the same as the actual dimension. To determine the magnitude of error, the depth of probe tip indentation into PMMA and EPS foam surface (i.e., elastic indentation) was measured as a function of time, applied load, and foam density. The residual indentation after the removal of the load (i.e., plastic indentation) was also studied.

The depth of elastic indentation increased with …