Operations Research, Systems Engineering and Industrial Engineering Commons^™

Initiation Of Caso4 Scale Formation On Heat Transfer Surfaces Under Pool Boiling Conditions, M. Reza Malayeri, Hans M. Müller-Steinhagen

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Calcium Sulfate Scaling Delay Times Under Sensible Heating Conditions, F. Fahiminia, A. Paul Watkinson, N. Epstein

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Real Time Fouling Diagnosis And Heat Exchanger Performance, Fábio Dos Santos Liporace, Sérgio Gregório De Oliveira

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Neural Network Based On-Line Detection Of Fouling In A Water Circulating Temperature Controller (Wctc), S. Lecoeuche, S. Lalot

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Economic And Performance Evaluation Of Two Oxidising Biocides In Sea-Water Cooling Systems, T. Casanueva-Robles, E. Nebot, J. F. Casanueva, M. M. Fernández-Bastón

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Molecular Modelling Approach On Fouling Of The Plate Heat Exchanger: Titanium Hydroxyls, Silanols And Sulphates On Tio2 Surfaces, E. Puhakka, M. Riihimäki, R. L. Keiski

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Induction Period Of Heterogeneous Nucleation During Crystallisation Fouling: Ion Implantation Effects, G. Rizzo, H. Müller-Steinhagen, E. Richter

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Effect Of Polarization On Manganese Biofouling Of Heat Exchanger Surfaces, T. Kuosmanen, M. Peltola, M. Raulio, M. Pullainen, T. Laurila, J-F Selin, H. Huopalainen, M. Salkinoja-Salonen

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Crystallization Fouling On Heat Transfer Surfaces – 25 Years Research In Braunschweig, M. W. Bohnet

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Fouling Reduction Characteristics Of A Circulating Fluidized Bed Heat Exchanger, Y. D. Jun, K. B. Lee, S. Z. Islam, S. B. Ko

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Optimised Heat Exchanger Management - Achieving Financial And Environmental Targets, S. Rädler, U. Ousko-Oberhoffe

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

On-Line Cleaning Schedule For Heat Exchangers In A Heat Exchanger Network - The Case Of Crude Distillation Unit, M. Markowski, K. Urbaniec

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Preface, M. Reza Malayeri

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Fouling Mitigation By Design, J. Nesta, C. A. Bennett

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Cover Page

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Table Of Contents, Hans Müller-Steinhagen, M. Reza Malayeri, A. Paul Watkinson

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Contributing Factor Analysis And Its Application For An Alcohol Plant Reboiler Fouling Phenomena, Shinji Isogai, Mitsutaka Nakamura, Seijirou Nishimura

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Enhanced Heat Exchanger Tubes: Their Fouling Tendency And Potential Cleanup, George F. Hays, Edward S. Beardwood, Steven J. Colby

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

The Poor Performance Of Naoh In The Dissolution Of Whey Protein Gels At Very High Ph, Ruben Mercadé-Prieto, Xiao Dong Chen, Robert J. Falconer, William R. Paterson, D. I. Wilson

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Particulate Fouling In Micro-Structured Devices, N. Kockmann, M. Engler, P. Woias

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Heat Exchanger Tube Inserts An Update In New Applications With Trouble Shooting Aspects In Crude Units, Residue Service, Reboilers, U-Tubes “Spirelf®, Turbotal®, And Fixotal® Systems” Application Examples In Chemical Plants And Refineries, Francois Pouponnot, Arthur W. Kreuger

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Monitoring And Modelling Of Gas-Side Boiler Fouling, R. Korbee, M. Losurdo, J. Lensselink, M. K. Cieplik, F. Verhoeff

Heat Exchanger Fouling and Cleaning - Challenges and Opportunities

No abstract provided.

Sequential Deposition Of Copper/Alumina Composites, X. Wang, J. Ma, A. Maximenko, E.A. Olevsky, M.B. Stern, B.M. Guenin

Industrial and Manufacturing Engineering

No abstract provided.

Pnl Applied To Economics, Barbara Diaz, Tomohiro Takagi, Sema E. Alptekin

Industrial and Manufacturing Engineering

This work is a continuation of Zadeh’s research on Precisiated Natural language. Precisiated Natural Language (PNL) provides a system for computation and deduction of propositions expressed in a natural language. The importance of PNL for economics is discussed. The improved process of PNL is presented using a real world example from economics.

A Case Study On Implementation Of Quality Function Deployment Into The Design Process Of A Small Job Shop, Benjamin A. Thomson

All-Inclusive List of Electronic Theses and Dissertations

The majority of research involving Quality Function Deployment (QFD) was focused on large consumer based companies and not small job shop business-to-business companies. This case study involved the implementation of QFD into the design process at Reynolds & Co., a small job shop in Terre Haute, IN. The specific objectives of the research were to find the QFD concepts that apply to the improvement of Reynolds & Co.'s (small job shop) design process. The next objective was to reduce the average design time associated with Reynolds & Co.'s design process. The final objective of this case study was to reduce …

Development Of A Statistical Model For Process Control To Eliminate Sink Marks In Injection Molded Products, Kurt Frederick Hayden

Masters Theses

Customer demands for high-quality, defect-free injection-molded products are ever increasing. In order to satisfy these quality requirements, much effort is spent monitoring and controlling variable data such as cycle time, part weight, and dimensions. Attribute defects such as sink or splay are often overlooked in the development of process control systems. However, customers reject products because of these attribute defects. Industrial control systems based upon process variables and product design variables can detect conditions that may result in the molding of products with attribute defects. The systems can then correct the process prior to the molding of these defective products. …

Modeling Multilevel Supply Chain Systems To Optimize Order Quantities And Order Points Through Mathematical Models, Discrete Event Simulation And Physical Simulations, Alok K. Verma

Mechanical & Aerospace Engineering Theses & Dissertations

Managing supply chains in today's distributed manufacturing environment has become more complex. To remain competitive in today's global marketplace, organizations must streamline their supply chains. The practice of coordinating the design, procurement, flow of goods, services, information and finances, from raw material flows to parts supplier to manufacturer to distributor to retailer and finally to consumer requires synchronized planning and execution. Efficient and effective supply chain management assists an organization in getting the right goods and services to the place needed at the right time, in the proper quantity and at acceptable cost. Managing this process involves developing and overseeing …

A Systems Methodology For Measuring Operational Organization Effectiveness: A Study Of The Original Equipment Computer Manufacturing Industry, 1948 To 2001, Teddy Steven Cotter

Engineering Management & Systems Engineering Theses & Dissertations

Optimizing operational organizational effectiveness is the central, although often unstated, goal of engineering management and systems engineering research and applications. Two fundamental problems remain to be addressed in pursuit of this goal. First, despite over fifty years of research in various disciplines, there is still no universally accepted definition of organizational effectiveness. Second, no methodology exists to identify the domains, dimensions, and determinants of operational organizational effectiveness and dynamically model operational organizational effectiveness within a given population.

This research synthesizes a systems engineering methodology for identifying the domains, dimensions, and determinants of and dynamically modeling operational organizational effectiveness for an …

A Method For Classification Analysis On Simultaneous Product Defects, Jason S. Trahan

Masters Theses

There have been many advancements that share similar tools and techniques that help reduce the manufacture of nonconformities. These include computer-aided analysis, design reviews, total quality management, multivariate analysis, process monitoring and control, and root cause analysis to mention a few.

This work details the methodology developed for manufacturing companies to predict attribute defects. Injection molding was used to demonstrate the proposed methodology. Data were collected on a variety of tool design and construction attributes thought to affect the performance of a tool. The independent variables consisted of categorical and numerical data types. The dependent variable was a nominal four-tuple …

An Analysis Of The Relationship Between Environmental Management And Environmental Compliance At Marine Corps Installations, Bevin J. Keen

Theses and Dissertations

Environmental compliance on military is challenging for a number of reasons, including the complexity of regulations, and the variety of operations which impact the environment. At times, public concerns and penalties stemming from environmental issues has infringed upon the United States Marine Corps' (USMC) ability to use all installation resources without restriction. This thesis examines which facets of environmental management are closely associated with high levels of compliance. Five variables of interest: Total Compliance, Total Management, Audit Management, Policy Management, and Training Management were isolated from 1998-2004 USMC environmental audit data, and subjected to statistical analysis. Through the examination of …