Explosives Engineering Commons^™

Induced Oxidation Effects On Physical And Mechanical Properties Of Lignite From Tempoku, Hokkaido, Japan For Sustainable Mining Via Subsurface Cultivation And Gasification Method, Akm Badrul Alam, Noritaka Aramaki, Shuji Tamamura, Akio Ueno, Takuma Murakami, Yoshiaki Fujii, Katsuhiko Kaneko

Journal of Sustainable Mining

The lignite resource has been under consideration for the subsurface cultivation and gasification (SCG) method to produce biomethane from lignite in Hokkaido, Japan. The primary phase of the method entails initiating the oxidative transformation of lignite using an H₂O₂ solution, resulting in the formation of dissolved organic carbon (DOC), a pivotal component. To examine the effects of induced oxidation on lignite's mechanical properties, artificial oxidation tests were conducted to form DOC. While there was a slight decrease in P-wave velocity and density, the uniaxial compression and indirect tensile strengths, as well as stiffness, did not decrease. These …

A Biocompatible Hybrid Approach For The Selection Of Gas Drainage Methods In Coal Mines Based On The Best-Worst Method And Analytic Network Process, Amir Jafarpour, Mehdi Najafi, Ali Dabagh

Journal of Sustainable Mining

Methane drainage is one of the main steps in underground coal mining projects. The operation of methane extraction from coal mines/seams is important from the safety, economic, and technical points of view. Selecting the appropriate method for methane drainage is very difficult, and if the method is not chosen correctly, it will lead to environmental problems. The relationship between different influencing factors, parameters, and methods (and how they affect) is significant in choosing the method of gas drainage. In the current study, a hybrid algorithm is presented based on an Analytic Network Process (ANP) and a method based on the …

Tnt Equivalence Of Binary Energetics, Gracie Mae James

Undergraduate Research Conference at Missouri S&T

TNT equivalency is a standard used to measure and quantify the effects of energetic materials. Using these equivalencies, the safety factors for minimum distances and storage of explosives are determined. Having a known TNT equivalence of energetic materials also helps estimate potential blast damage and risks for individuals. The TNT equivalencies for numerous energetic materials, such as binaries, have no published values, but are regularly used in industry, military, and research testing. To determine TNT equivalence, three tests will be performed: 1) a plate dent test, 2) air blast tests to measure air overpressure and calculate impulse, and 3) velocity …

Analysis Of The Key Performance Indicators Between Lithologies On Mine To Crusher, Janine Figueiredo, Vidal Torres, Rodolfo Cruz, Douglas Moreira

Journal of Sustainable Mining

The evolution of the mineral economy requires greater technological developments to find a better use of resources and reserves through the relationships between the characteristics of the rocks and the need to enable the entire mining enterprise. This study focuses on the development of new rock blasting technologies that result in a more optimized fragmentation according to the lithology in the feed of the primary crusher. This methodology is known as Mine to Crusher, through which it becomes possible to minimize costs in the future prospecting of the mine and maximize productivity. For this methodology to be developed, it was …

Review On Quarrying Methods Suitable For Space Mining Missions, Daniel Chpolianski, Zong-Xian Zhang

Journal of Sustainable Mining

In this review paper, existing mining techniques and technologies are scrutinized for the purpose of superterrestrial use. Different aspects and challenges of a space mining mission are examined in light of the viable iron-nickel quarry operation on M-Type (metallic) asteroids. The research and findings presented in this work cover different disciplines of science and engineering, including Geology, Rock Engineering, Space Exploration, and Explosives Engineering. The particular focus of this study is on the application of shaped charge explosives in military munitions, oil well perforations, tunneling, open-pit mines, and bolder fracturing that could be deployed in asteroid mining missions. The central …

Municipal Waste Management Based On Geomechanical Assessments Of The Landfill Site Slope – A Case Study In Southern Poland, Tomasz Janoszek, Phu Minh Vuong Nguyen, Jacek Grabowski

Journal of Sustainable Mining

Over time, municipal waste landfills tend to go higher and become larger. The stability of the municipal landfill slope is one of the basic geotechnical tasks. This task ensures continuous waste deposition on the landfill surface and safety in its surroundings. With the increasing height and volume of the landfill, it is difficult to estimate the available area of the municipal landfill, where more waste can be safely deposited due to a number of variable factors, such as the geotechnical conditions of the municipal landfill, the morphological composition, age, and degree of compaction and decomposition of the deposited waste.

This …

Difficulties Of Hydrofracturing In Sandstone – Experimental Study, S Vikram, Dheeraj Kumar, Ds Subrahmanyam

Journal of Sustainable Mining

Hydrofracturing in sandstone is not an easy task. Sandstone is porous; fluid dissipation is common hence unable to obtain breakdown pressures in certain flow rates (0.0000005–0.0001 m3/s). The higher flow rate (0.00025 m3/s) is ascertained to determine the fracturing pressures. Due to this, fracture propagation and delineation are observed [1]. To enhance, an experimental method is adopted by carrying out 6 Hydrofracturing tests in a borehole comprising sandstone. A high flow rate of 0.00025 m3/s and viscosity 0.001 Pascal second is applied. Later, the fracture simulation was run on 12 core samples collected from the same depths in a lab. …

Contribution Of Mine Water And Uranium Ore Rocks To The 222rn-Induced Radiation Dose Received By The Mine Workers In A Low-Ore Grade Underground Uranium Mine, India, Imran Athar Beg, Patitapaban Sahu

Journal of Sustainable Mining

More than 50% of the radiation dose received by underground mine workers is mainly due to the inhalation of radon (222Rn) gas and its decay products in an underground mine working space. Monitoring and controlling of 222Rn exhalation in the underground mine working plays a vital role in minimizing the radiation risk hazards to the mine-workers. This study discusses the contribution of mine water and uranium ore to 222Rn activity concentration in mine air and its health risk assessment. The annual effective radiation dose (ERn) due to inhalation of 222Rn for mine workers is estimated 0.10 mSv/y. Furthermore, the estimated …

Development Of An Empirical Ground-Motion Model For Post-Mining Induced Seismicity Near Gardanne, France, Pierre Gehl, Pascal Dominique, Hideo Aochi, Mickael Delatre, Jannes Kinscher, Isabelle Contrucci

Journal of Sustainable Mining

Since the closure of mining activities in 2003, the coal basin of Gardanne in South-East France has experienced thousands of small-magnitude earthquake events, mostly triggered by the flooding of mine workings. Some of these events have been powerful enough to be strongly felt by the population, generating nuisance and concern about potential damage to buildings. The aim of this study is to improve the characterisation of the level of ground motion at the surface, by developing a ground-motion model for post-mining induced seismicity, based on several years of recorded data. A Bayesian-based method is applied to the data in order …

Hydraulic Borehole Mining (Hbm) Technology Employed In Lignite Mining – Technical, Economic And Market Aspects, Bartłomiej Jura, Piotr Krawczyk, Jacek Skiba, Natalia Howaniec

Journal of Sustainable Mining

The results of a cost-effectiveness and economic efficiency assessment of the Hydraulic Borehole Mining (HBM) technology applied to lignite mining are presented. The Dynamic Generation Cost, the Net Present Value, and the Internal Rate of Return were calculated for the extraction of lignite at a rate of about 3.44 million Mg/year from a mining parcel of 1 2.5 km, taking into account CAPEX and OPEX. The cost of mining 1 Mg of lignite using the HBM technology was reported to be lower than its market prices before the energy crisis in Europe caused by the war in Ukraine. The values …

Predicting Open-Pit Mine Production Using Machine Learning Techniques, Faustin Nartey Kumah, Alex Kwasi Saim, Millicent Nkrumah Oppong, Clement Kweku Arthur

Journal of Sustainable Mining

In mining, where production is affected by several factors, including equipment availability, it is necessary to develop reliable models to accurately predict mine production to improve operational efficiency. Hence, in this study, four (4) machine learning algorithms – namely: artificial neural network (ANN), random forest (RF), gradient boosting regression (GBR) and decision tree (DT)) – were implemented to predict mine production. Multiple Linear Regression (MLR) analysis was used as a baseline study for comparison purposes. In that regard, one hundred and twenty-six (126) datasets from an open-pit gold mine were used. The developed models were evaluated and compared using the …

Identification Of Strong Tremor Causes For Appropriate Rock Burst Prevention In A Hard Coal Mine, Rafał Pakosz, Łukasz Wojtecki, Maciej J. Mendecki, Agnieszka Krzyżanowska

Journal of Sustainable Mining

The exploitation carried out in the Bielszowice part of the Ruda Hard Coal Mine is mainly accompanied by seismic and rock burst hazards. The occurrence of high-energy tremors may be associated with many factors, e.g., fracturing of thick layers of high-strength rocks or destruction processes of a stressed and/or thick coal seam. These factors are often combined when excavating a single longwall panel. Determining the causes of strong tremors is of fundamental importance for mining and rock burst prevention. The extraction of the 004z longwall panel in the top layer of coal seam No. 504 was designed in complex geological …

A Quick And Cost-Effective Method For Monitoring Deforestation Of Oil Sands Mining Activities Using Synthetic Aperture Radar And Multispectral Real-Time Satellite Data From Sentinel-1 And Sentinel-2., J Garcia Del Real, M. Alcaraz

Journal of Sustainable Mining

Alberta’s oil sands mining operations rank among the largest human-made structures globally. Monitoring through the use of Synthetic Aperture Radar (SAR) and Multispectral satellite imaging is an indispensable strategy in attaining sustainable development and mitigating deforestation in the third-largest verified oil reserves worldwide. This paper introduces a novel approach for cost-effective and reliable monitoring of deforestation caused by oil sands mining, avoiding cumbersome methods. It focuses on observing forest/non-forest areas affected by Suncor Energy Company’s mining assets in Alberta, using a combination of SAR and Multispectral satellite remote sensing. Radar images from Sentinel-1B and Multispectral images from Sentinel-2A were analyzed …

Analysis Of The Impact Of Water Treatment By Liming Sedimentation And Dredging On The Content Of Heavy Metals In Fish Intended For Consumption, Asfie Maidie, Ismail Fahmy Almadi, Muchlis Efendi, Rekha Yusdha Nilawardhani, Komsanah Sukarti, Henny Pagoray

Journal of Sustainable Mining

The present study sought to determine the presence of metals and arsenic, a metalloid, among the fish of a coal mine reservoir, where the water was treated regularly through liming sedimentation combined with dredging, and the fish living in an adjoining river. The potential hazard of metals in fish as human food was analyzed. Except for selenium (an important metal to the human body), which was higher among the river fish than in the reservoir fish (P < 0.01), there were no particular patterns of other studied metals found in either habitat (P > 0.05), and apparently not related to the fish family that consumed by local people. Measurements of bioaccumulation factor (BAF) yielded scattered values from …

Acknowledgement Of Reviewers

Journal of Sustainable Mining

No abstract provided.

The Outburst Probability Index (Ww) As A New Tool In The Coal Seam Outburst Hazard Forecasting, Marcin Dreger, Piotr Celary

Journal of Sustainable Mining

Gas and rock outbursts are one of the most unpredictable natural hazards in Polish and worldwide underground mining. The complexity and unpredictability of this phenomenon make forecasting and underground prevention difficult to achieve. Gas-geodynamic phenomenon occurs in greater intensity in the southern part of the Upper Silesian Coal Basin (USCB) – close to the Bzie-Czechowice fault zone. The relatively low firmness of coal combined with high methane content and pressure may result in a coal seam outburst. To forecast the gas and rock outburst occurrence, the sorption capacity and gas diffusion parameters are used in Polish coal mining. To provide …

Dielectric Permittivity Of Pzt 95/5 Ferroelectric Ceramics And 0.27pin-Pmn-0.26pt Single Crystals Under Pulsed High Electric Fields, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Christopher S. Lynch

Mining Engineering Faculty Research & Creative Works

The dependence of the dielectric permittivity of ferroelectric materials on electric field magnitude impacts the performance of ferroelectric devices. In a ferroelectric generator, a shock wave travels through the ferroelectric element and depolarizes it, and surface charges are released from the element electrodes, resulting in the generation of a megawatt power level for several microseconds. The dielectric properties of the compressed and uncompressed zones of the ferroelectric element affect the generated voltage and energy. The results of previous studies indicate that the low-field dielectric permittivity of poled Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 (PZT 95/5) ferroelectrics in the uncompressed zone differs significantly from the high-field …

The Valuation Of Exit Option In A Lignite Mine Using Monte Carlo Simulation, Marcin Pawlak, Tomasz Wiśniewski

Journal of Sustainable Mining

This study aims to demonstrate the application of simulation techniques to the valuation of real options. The nature of the paper is methodological and empirical. The purpose of the valuation of the option to close a lignite mine in Poland is to demonstrate the methodology and advantages of employing Monte Carlo simulation in the valuation of real options. Close to actual numerical data reveals a complex optimization problem in the context of strategy selection by decision-makers. Numerous factors (extraction costs, reclamation costs, the write-off for the reclamation fund, etc.), their interpenetration and multilevel influence on the decision to close the …

Mathematical Model For The Management Of The Wave Processes In Three-Winding Transformers With Consideration Of The Main Magnetic Flux In Mining Industry, M. S. Seheda, O. S. Beshta, P. F. Gogolyuk, Yu. V. Blyznak, R. D. Dychkovskyi, A. Smoliński

Journal of Sustainable Mining

The aim of the work is to study the wave processes in three-winding power transformers caused by impulse overvoltage, to create an improved mathematical model for reproducing the process of distribution and transmission of the impulse in the windings of a three-winding power transformer. A mathematical model has been developed for the study of internal overvoltage in the windings of three-winding power transformers, based on the proposed substitute circuit of an infinitesimal element, taking into account the longitudinal and transverse inductive connections between the turns of the winding, the electromagnetic connections between the windings and the flux splitting from the …

The Effect Of Blasting Using Low-Density Emulsion Explosives, Vinko Škrlec, Mario Dobrilović, Barbara Štimac Tumara, Vječislav Bohanek

Journal of Sustainable Mining

Low-density emulsion explosives are essentially blends of an emulsion matrix and a certain amount of gaseous phase inclusions acting as hot spots. With the addition of expanded polystyrene for gaseous sensibilization, the resulting explosive blend was developed to reduce peak values and pressure impulse of gaseous detonation products on surrounding rock. This resulted in a decrease in rock stress and a decrease in cracking zone width outside of the minefield boundary. The use of low-density emulsion explosives correlates with the decrease in the seismic effect of blasting, more precisely, the decrease of induced rock oscillation velocities. The low-density emulsion explosive …

Numerical Simulation On Effect Of Coal Pillar Width On Stability Of Retained Roadway: A Case Study Of Khe Cham Coal Mine, Vietnam, Quang Phuc Le, Tien Dung Le

Journal of Sustainable Mining

When extracting coal seams in Vietnam underground mines, coal pillars are often left unmined for the protection of retained roadways in the longwall mining method. During longwall mining operations, coal pillars are often placed where high-stress concentrations occur in the abutment pressure zone of adjacent panels, especially when extracting seams under hard-to-cave main roof conditions. The instability of coal pillars under the loading of the main roof may cause the roadway to collapse, threatening the safe operation of a coal mine. This paper presents a detailed numerical investigation of the effect of coal pillar width on the stability of retained …

High Strain Rate Analysis Of 3d Printed Concrete As Compared To Conventionally Cast Concrete, Weston Mcleod Thomsen

Masters Theses

"3D Printed Concrete (3DPC) is a developing method of construction that has advantages over conventional methods, including formwork reduction, complex geometry, and expedited construction. This technology has potential benefits for the military when considering the austere environments that forward operating bases are built in. This study aims to assess 3DPC applications in protective structures that protect critical assets from explosive blasts. These protective structures experience a high-strain rate response during blast loading of the structure, and the effects of this have yet to be analyzed in the literature concerning 3DPC. With the lack of prior research, the focus here will …

Quantitative Proteomic Profiling In Brain Subregions Of Mice Exposed To Open-Field Low-Intensity Blast Reveals Position-Dependent Blast Effects, M. Jackson, S. Chen, P. Liu, M. Langenderfer, C. Li, H. R. Siedhoff, A. Balderrama, R. Li, Catherine E. Johnson, C. M. Greenlief, I. Cernak, R. G. Depalma, J. Cui

Mining Engineering Faculty Research & Creative Works

The Neurological Consequences of Combat Blast-Induced Neurotrauma (BINT) Pose Important Clinical Concerns for Military Service Members and Veterans. Previous Studies Have Shown that Low-Intensity Blast (LIB) Results in BINT with Multifaceted Characteristics in Mice Exposed to Open-Field Blast in Prone Position. Although the Prone Position is Natural for Rodents, Experimental Models of Blast using This Position Do Not Represent Common Scenarios of Human Standing While Being Exposed to Blast during Deployment or Military Training. in This Study, We Used Our Previously Developed BINT Mouse Model of Open-Field LIB with Mice in an Upright Position and Then Used Quantitative Proteomics and …

A Review Of Current Safe Distance Calculations And The Risk Of Mild Traumatic Brain Injury, A. R. Loflin, C. E. Johnson

Mining Engineering Faculty Research & Creative Works

Explosive breaching is a tactic operational professionals use to gain rapid entry and tactical advantage. This tactic exposes individuals to repeated low-level blasts (LLB), overpressure exposure generally occurring from user-directed munitions. The experimentation described in this paper highlights the need for further research into implementing explosives in tactical situations, specifically in confined areas, and the effects on individuals exposed. While current safety calculations predict peak pressures from an open-air detonation, this study incorporates the impulse of the total explosive event in a confined space. Sixteen explosive events were conducted to measure peak overpressures of the total duration of the event …

Investigation Into Helmet–Head Shock Wave Interactions At Low Overpressures Through Free-Field Blasts And Schlieren Imagery, C. J.H. Thomas, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

Brain Injuries in Warfighters Due to Low-Level Blasts, Even While Wearing a Helmet, Are Common. Understanding How the Form of a Shock Wave Changes When Impacting a Head Donning a Helmet May Present Solutions to Reducing Shock Loading on the Head, Thereby Reducing the Prevalence of Blast-Induced Traumatic Brain Injury. a Manikin with PCB Piezoelectric Transducers throughout the Head Was Exposed to Low-Pressure Free-Field Blasts using an RDX-Based Explosive Charge Designed to Output a Side-On overpressure of 4 Pounds Per Square Inch (Psi) [27.5 Kilopascals (KPa)] with and Without a Helmet. Orientations of 0, 45, 90, 135, and 180 Degrees …

Underground Blast Fragmentation Modeling For Use In The Mine-To-Mill Strategy, Lauren Shields

Theses and Dissertations--Mining Engineering

More than 40 years ago, the mine-to-mill concept was introduced in the mining industry by establishing a relationship or link between processing and mining activities. To date, many successful case studies have documented the evident benefits of the mine-to-mill approach. In most cases, the basis of the mine-to-mill approach is to tailor the details of a blast design and its proper execution in order to satisfy specific mineral processing requirements downstream. Most of the available literature and case studies deal with surface mine operations. Due to the relative simplicity of surface mining, the relationship between the powder factor, defined as …

Experimental Investigation Of A Viscoelastic Liner To Reduce Under Helmet Overpressures And Shock Wave Reflections, Cody J.H. Thomas, Fatih Dogan, Catherine E. Johnson

Materials Science and Engineering Faculty Research & Creative Works

Introduction: Shock wave overpressure exposures can result in blast-induced traumatic brain injury (bTBI) in warfighters. Although combat helmets provide protection against blunt impacts, the protection against blast waves is limited due to the observed high overpressures occurring underneath the helmet. One route to enhance these helmets is by incorporating viscoelastic materials into the helmet designs, reducing pressures imposed on the head. This study aims to further investigate this mitigation technique against under-helmet overpressures by adding a viscoelastic liner to the inside of a combat helmet. Methods: The liner's effectiveness was evaluated by exposing it to free-field blasts of Composition C-4 …

Discrete Element Modeling To Predict Muckpile Profiles From Cast Blasting, Russell Lamont

Theses and Dissertations--Mining Engineering

Movement of overburden or ore from one location to another may be considered the primary physical process of mining. The means by which it is transported is then of primary concern both to economic production and cost control. The geologic characteristics of some mineral deposits, especially coal and phosphates, lend themselves to overburden transport by means of cast blasting, which when efficiently designed has proven itself to be a cheaper method than traditional truck/shovel, dragline, or even dozer push transport. Simultaneously, this movement of a significant portion of overburden using explosives may enable an operation to increase mineral production, as …

Spatiotemporal Variance Image Reconstruction For Thermographic Inspections, Logan M. Wilcox, Emily M. Johnson, Emma T. Bohannon, Catherine E. Johnson, Kristen M. Donnell

Mining Engineering Faculty Research & Creative Works

Active microwave thermography (AMT) is a nondestructive testing and evaluation (NDT&E) technique that utilizes a radiating antenna to induce a thermal increase on or within a specimen under test (SUT). The radiated power density is spatially nonuniform and therefore results in a spatially nonuniform thermal excitation, which may result in missed or false indications of defects. To this end, this work proposes a novel image reconstruction technique for nonuniform excitation/heating and is referred to as Spatiotemporal Variance Reconstruction (STVR). STVR utilizes the spatial and temporal variance of the surface thermal profile. STVR is advantageous in that it does not require …

Investigating Detonation Parameters Through The Plate Dent Test: A Novel Approach For Characterizing Detonation Curvature And Thickness, Emily Michelle Johnson

Doctoral Dissertations

Detonation is the driving factor behind how an explosive, used in an array of applications, performs. Understanding and measuring detonation parameters of an explosive is key in explosive charge design and application. Currently, determining parameters is costly as the instrumentation needed is expensive in terms of price, maintenance, and personnel. This research examines two methods of determining detonation parameters through measurement of secondary material response to the detonation wave in an effort to provide an alternate, simple, and inexpensive method of measurement. The first of these studies focuses on the Gurney Model and demonstrates that the model's accuracy was diminished …