Other Mechanical Engineering Commons^™

Thermal Modeling Techniques For Additively Manufactured Porous Metals, Lucas D. Rambo

Master's Theses

Advances in additive manufacturing have enabled the creation of metallic components with tailored porosity, offering design flexibility for thermal, structural, and fluid transport applications. This thesis investigates the effective thermal conductivity (ETC) of porous Inconel 625 (IN625) and Inconel-ceramic composites (IN625-RAM2) fabricated by Laser Powder Bed Fusion (LPBF) using Elementum 3D’s PermiAM technology. Experimental measurements of thermal conductivity using the laser flash method are compared to numerical models built from micro-computed tomography data. Simulations were performed using both finite element (FE) and finite volume (FV) methods to evaluate thermal transport in real microstructures. The study investigates the effects of micro- …

Hands-Free Balance Protocol And Development Of An Iphone App For Self-Assessment, Jacob Matties

Master's Theses

For many clinical populations, the measurement of balance is a critical task. Previous studies have agreed that smartphone IMUs provide a valid measure of balance that can be significantly correlated with force plate measurements and is sensitive enough to distinguish between various balance poses, but many balance assessment protocols require uncommon equipment or the use of hands during assessment. These limit accessibility of balance assessment. To eliminate the need for hands or any additional equipment, this study assessed the use of a smartphone recording the root mean square of 3D acceleration magnitude. The goal of the study was to determine …

Helical Products Parts Display Stand, Binh Nguyen, Emily Yuan Mendyke, Zoe Porter

Mechanical Engineering

Helical Products needs a new product display stand that will demonstrate their custom springs, couplings, and u-joints. Their current display stand, a marble run contraption, is large, loud, and difficult to transport, so they would like the new stand to remedy these issues. The goal of this senior project is to create a display stand that captures the attention of their customers with dynamic product demonstrations while addressing the issues outlined above.

The new display stand is also a marble run contraption, but instead of being almost 4 feet tall and 3 feet long, it is 23” tall, 26.25” long, …

Development Of Planetary Drive System For Formula Sae Electric Race Car, Brian Wong, Bradley Maruoka, Joshua Charles Fine, Madison Kai

Mechanical Engineering

Hub motors are compact electric motors mounted directly on each outboard wheel hub. Utilized in Formula SAE and Formula Student vehicles, this configuration offers several advantages over traditional drivetrains, including packaging optimization within the chassis, vehicle traction, and improved efficiency. Although hub motors are not yet common in 4WD vehicles, they are being explored for use in EVs and may become more common in the future. Every year, Cal Poly Racing FSAE designs and builds a formula-style race car. To improve drivetrain performance, the team is investigating the achievability of a hub motor 4WD drivetrain, requiring extensive research, development, and …

Treating Ground Water For Agricultural And Individual Consumption, Gabby Miller, Bronson Scott, Michael Clawson

Biomedical Engineering

This project, conducted in collaboration with Cal Poly seniors and Da Vinci High School students, aims to develop a solar-powered groundwater purification system. This system is designed to provide clean water for agricultural use and individual consumption, addressing the growing concerns of groundwater contamination and accessibility needs. The final prototype integrates a gravity filtration system combined with chemical purification, utilizing aluminum sulfate and chlorine to remove particulates, bacteria, and organic compounds.

The research phase involved an extensive review of groundwater contamination issues, existing filtration technologies, and market analysis. Key design constraints included cost-effectiveness, ease of maintenance, and minimal energy consumption, …

Pseudo Gps For Romi, Emmanuel Baez, Owen Guinane, Gabriel Coria, Conor Schott

Mechanical Engineering

The Pseudo-GPS system for Romi robots addresses the need for precise real-time location tracking in Cal Poly's Mechatronics lab. This project, developed by Emmanuel Baez, Gabriel Coria, Owen Guinane, and Conor Schott, under the guidance of instructor Charlie Refvem, provides a proof-of-concept system to enhance the Romi robots' geolocation capabilities for advanced robotic algorithms.

The proposed system uses a Raspberry Pi 4 equipped with a Pi camera module and ArUco markers to track the position and orientation of Romi robots within a lab environment. Custom 3D-printed stands secure markers on the robots, and a designated origin marker defines the coordinate …

Cryogenic Fuel Applications To Sustainable Commercial Aircraft, Jack R. Kisling, Lillian Panning

College of Engineering Summer Undergraduate Research Program

Finding a source of clean and renewable energy is one of the greatest challenges humanity will face in the 21st century. With populations expanding, developing countries increasing their use of resources, and the rapid and alarming effects of climate change, a shift to a sustainable future is an existential prospect.

The goal of our project is to take the first steps toward getting safety procedures and lab space established, so mechanical engineering senior projects can quickly begin to experiment with cryogenic fuels. They will explore the application of cryogenic fuels to commercial aviation.

Slo Children’S Museum Music Education Exhibit, Charles Coffen, Madeline Carleton-Sniff, Yael Castillo, Anthony Ramos

Mechanical Engineering

The Children’s Museum in San Luis Obispo is a non-profit facility providing education to young children through interactive exhibits. The proposed project would address a basic introduction to musical theory through mechanical engineering principles. The target audience for this musical art installation would be young children, aged 5-10, who would be regularly interacting with this exhibit, as well as their parents, and the employees of the museum. The installation will educate children in basic musical understanding through interaction while still being engaging enough to hold their attention. This document describes the final concept design and various methods of verification in …

Modeling, Simulation, And Experimental Testing Of A Single-Legged Hopper, John Anthony Bennett

Master's Theses

Legged robots are well-suited for navigating unstructured terrain due to their ability to perform agile dynamic motions. Building on the efforts of Cal Poly's Legged Robotics Group, this project focuses on achieving stable forward hopping with a single legged robot.

A comprehensive model of leg hopping is formulated, with leg dynamics during flight and stance phases derived using Euler-Lagrange equations. During the stance phase, a spring-mass system models the leg-ground interaction. The touchdown and lift-off conditions are formulated mathematically, and state mappings between phases are determined via momentum conservation. A two-phase hybrid controller is designed, incorporating trajectory planning during flight …

F56: Rocket Thrust Vector Control, Ethan Douglas Anderson, Yiming Trent Jia, Sahil Sampat

Mechanical Engineering

This Final Design Review (FDR) report compiles relevant information regarding the Rocket Thrust Vector Control senior project as sponsored by Ethan Anderson from Cal Poly Space Systems (CPSS). Documented in this report is our progress from the months following our Critical Design Review (CDR) completion. This consists of a brief overview of the design our thrust vector control (TVC) system and its subassemblies with design changes noted, a thorough walkthrough of our procurement, manufacturing, and assembly process for creating our verification prototype (including software), a breakdown of how we verified each of our specifications through inspection and testing and the …

Focused Led Sintering, Dylan Defazio, Nilav Maulik, Branden Majors, Michael Fontillas

Mechanical Engineering

This report provides a detailed overview of the final design of our light-emitting diode (LED) focusing system. Our system incorporates a converging lens and a specially designed "glass funnel," which acts as a thick fiber optic that narrows the light to a fine point through internal reflection. The glass components of our system are precisely housed in a part made using advanced computer-numeric controlled (CNC) Mill and CNC Lathe manufacturing processes. This ensures high precision and durability of the overall system. Our LED focusing system is designed with a 60-watt stage light. The decision to use a glass funnel as …

Nsf-Eri Evolution Of Liquid Sheet Edges Project: Soap Film Frame Withdrawal And Positioning Apparatus, Samir S. Patel, Sophia Young, Nicole N. Morgan

Mechanical Engineering

The experimental investigation of instabilities along retracting liquid sheet edges seeks to answer a fundamental fluid mechanics question. We’ve successfully delivered an experimental apparatus to conduct research and answer this question. This document chronicles a design overview of our apparatus, our manufacturing process, our design verification, and recommendations for future steps. The final product is a document outlining our final design (i.e., our ‘Final Design Review’ (FDR)).

Liftwalker, Kai A. De La Cruz, Lexie Caterine, Adam Monroe, Jame Whealan

Mechanical Engineering

The LiftWalker’s purpose is to lift users with degenerative diseases from a seated to standing position and support them as they practice the motion of walking as a form of physical therapy. The current LiftWalker is upward of $5,000 so we redesigned the LiftWalker to be more accessible around the world. This meant using affordable and accessible materials and manufacturing processes. To achieve this, we made our design mostly out of bike parts and off-the-shelf components. When it came to the lift system, we found that to maintain a safe and comfortable design it was best to purchase a trailer …

Bird Trail Stairway Access Replacement, Mackenzie Wright, William Spellman, Nicholas Buccino, Jack Long

Mechanical Engineering

Dana Adobe & Cultural Center, a non-profit organization in Nipomo, California, seeks to restore access to the Bird Trail located on their site. This project aims to design and manufacture a replacement stairway for safe creek bed crossing on the trail. Within this document, we have detailed our system design, function, and justification for our design. The procurement, manufacturing, and assembly plan have been outlined along with tests we completed.

One of the most important functions of our design is for the structure to be retractable so that it can be removed from the creek bed when needed. To address …

Product Design For Repairability: Identifying Failure Modes With Topic Modeling And Designing For Electronic Waste Reuse, Claire J. Franz

Master's Theses

Design for repairability is imperative to making products that last long enough to justify the resources they consume and the pollution they generate. While design for repairability has been gaining steady momentum, especially with recent advances in Right to Repair legislation, there is still work to be done. There are gaps in both the tools available for repair-conscious designers and the products coming onto store shelves. This thesis work aims to help set sails in the right direction on both fronts.

This research explores the use of topic modeling (a natural language processing technique) to extract repairability design insights from …

Cal Poly Fluid Power Vehicle Challenge 2024, J. Mason Gray, Ryan D'Amour, Alberto Acho Lopez, Christian Ferrandino, Johnathan Dietz

Mechanical Engineering

In this Final Design Review, the Cal Poly Fluid Power Vehicle Team competed in Norgren’s 2024 Fluid Power Vehicle Challenge. The design need of the competition was for college teams to compete with human-powered, hydraulic-driven vehicles in an endurance race, a sprint race, an efficiency race, and a regenerative power race. The competition need was to design a vehicle to win in as many races as possible, achieving the highest overall score and winning the competition. With a design emphasis on the endurance and sprint race, the Cal Poly team designed a fluid power system that fastened to a purchased …

Exhaust Manifold Pressure As Engine Tuning Parameter, Kieran Truth Cunningham, Adam Sullivan Mathews, Connor Richard Smullen

Mechanical Engineering

In this project, the exhaust manifold absolute pressure (EMAP) of a 1986 Toyota Corolla was analyzed across a variety of load cases and was compared with the mass air flow (MAF) of the intake, simultaneously. Correlations were found in the trends of EMAP and MAF sensor readings that may prove helpful in tuning engines that have difficulty in accommodating a MAF sensor. These correlations were found in areas of the powerband where aftermarket tuned engines typically have poor airflow sensing. An equation was developed to spoof MAF input using EMAP and other engine operating parameters.

Pitot Tube Test Bench, Jesus Perez, Zachary Owen, Adrian Lopez

Mechanical Engineering

This Final Design Review documents the senior design project carried out by a team of Mechanical Engineering students attending California Polytechnic State University, San Luis Obispo for Roger Benham, and his company Leak Control Services Inc. The requirement was to design, build, and validate the performance of a test fixture that quantifies the performance characteristics of flow rate and pressure drop of different pitot tube designs to be used in a chemical dispensing application for Mr. Benham. This document includes relevant background research on the need for the fixture as well as relevant technical research. This document also contains objectives …

Slitter Blade Sharpener, Griffin Buchan, Regan Lane, Kinsale Sproule

Mechanical Engineering

Within this document, our team, “Think Sharpener”, will discuss the following work we have completed since the Critical Design Review: material and part procurement, the manufacturing process for our prototype, and a discussion of our results from testing our final Verification Prototype (VP). To summarize our team’s work during the last portion of this project, our design for the slitter blade sharpening mechanism required us to consult the IME department for materials and manufacturing guidance, order pneumatic components from various online hardware companies, and test our VP to verify we met the engineering design specifications. Our slitter blade sharpening mechanism …

Maitreya Desalination, Riley Taft, Hudson Kispert, Brendan Dizon

Mechanical Engineering

This document relays the design and manufacture of a dual power input Reverse Osmosis desalination unit. It's power sources are electric drive and human power via recumbent seated cycling. Fresh water outputs range from 4 - 7 GPH for human power inputs of 150 - 280 Watts depending on the selected gearing ratio from the derailleur.

Band Motor Crankshaft For Hydrogen Combustion Engine, Lincoln Hofer, Jacqueline Mendoza Cortes, Austin Rhee, Roze Raymond

Mechanical Engineering

This report outlines the steps in which a group of four mechanical engineers at California Polytechnic State University California, San Luis Obispo, addressed an issue brought up by Professor Roger Benham from the Materials Department. The task included developing an automated and modular testing platform for a revolutionary concept crankshaft prototype – meant for a hydrogen combustion engine - developed and produced by the sponsor: Roger Benham. A testing platform is necessary to measure the performance of the shaft design created to eventually implement this subsystem into a complete hydrogen engine design. Values being tested include geometric validation, maximum static …

Interactive Water Vortex Exhibit, Simon Way, Emily Laing, Roqaya Naseri, Makenzie Kan

Mechanical Engineering

The San Luis Obispo Children’s Museum requested an interactive water vortex exhibit to both engage and entertain inquisitive guests, ages two to eight. The goal was to design and manufacture an exhibit that would educate its users on the fluid mechanics behind water vortices. They activate the mechanics by spinning a wheel, which is perceived as the catalyst to manipulate the flow of water to successfully create a whirlpool. Our team has created an interactive display that will enlighten young minds, providing the museum with an educational exhibit which shares a concept not currently taught by any other. Our project …

Laboratory Glovebox, Jackson T. Tenne, Noah Fitzgerald, Scott Stirling, Danny Ho

Mechanical Engineering

The Laboratory Glovebox project aimed to create an affordable, functional, ready to use, airtight workstation enabling Dr. Ramanan Sritharan to continue his research of the mechanical properties of nanomaterials. When airborne, nanomaterials are a health risk if inhaled, so the design requires a hermetic seal to protect the user. The design was meant to emulate features of the glovebox used by Dr. Sritharan during his PhD research, but was optimized to meet a budget of $3000, much cheaper than comparable alternatives. Key design features included acrylic panels, a transfer chamber, glove mounts, and a main access door, all sealed to …

Cooled Liquid Rocket Thrust Chamber, Benjamin Gibson, Kealan Frederick Harris, Ryan Frank Schackel, Bjorn Thorsen

Mechanical Engineering

Cooling may affect the thrust output of a small-scale rocket. Little research is published about small-scale rocket performance. We hypothesize the thrust produced varies as the amount of cooling varies. To facilitate assessing this hypothesis, we have designed and built a liquid rocket engine rated for at approximately 25 lb_f of thrust. Our objective was to build in parallel with Cal Poly Space Systems, who built a rocket engine with similar specifications except without cooling. Our challenge is to integrate film cooling, so that the effects of cooling may be compared to Cal Poly Space System’s engine which has …

Flexible Water Cooling, Joshua Terlaje, Andrew Lin, Nicholas Morales, Tanner Parrott

Mechanical Engineering

The goal of this project is to develop and deploy a water-cooling system to reduce the danger of heat exhaustion among communities of farmworkers. Currently, it is difficult to keep chilled water available throughout the workday when using portable water coolers. The idea uses a refrigeration system to chill the water supply by using the power take-off (PTO) on farm equipment and a corresponding generator to get around this restriction.

The project places a strong premium on keeping the chilled water supply at a maximum temperature of 59°F to ensure compliance with the California Department of Industrial Relations' requirements. Each …

Metamaterial-Based Soft Actuators, Savannah June Cheney, Nathan Kessenich, Marco Leen, Merek Mcgill

Mechanical Engineering

For this project the team was tasked with designing a soft actuator that incorporated aspects of mechanical metamaterials. The team’s goal was to demonstrate the feasibility of structural metamaterials in the field of soft robotics and demonstrate a novel response with a final assembly. Also included in the team's discussion are the manufacturing steps, protype tests & results, and suggested future next steps. Following the previous report (critical design review) the team chose to follow the path of designing a continuum robot with metamaterials incorporated into the design. A continuum robot consists of a soft cylindrical body with rigid evenly …

Disc Golf Throwing Robot, Nevada S. Schultz, Sydney M. Lewis, Erick Edmundo Daza, Rachel Alysse Greenberg, Peter M. Kean

Mechanical Engineering

Disc golf companies need better methods to test disc flight. The scope of this project is to create a disc throwing robot that can throw a disc golf driver 450-500 feet, with control over the speed, spin, and release angle. Research shows that multiple disc-throwing products exist; however, none meet the full requirements of this project. The Cal Poly senior project design team created a proof-of-concept machine. This prototype started as a two-wheel mechanism. Eventually, a third wheel was added, allowing for complete control over disc spin. The three-wheel prototype reached 62 mph when perfectly calibrated. The prototype is accurate, …

Valve Efficiency Testing Device, Jake Robert Rydberg, Andrew Keith Willardson, Jake Ben Jezier, Emily Marie Wannenmacher

Mechanical Engineering

This document serves as the official Final Design Review (FDR) for the mechanical engineering team on the Valve Efficiency Testing Device project for the Phillips 66 Rodeo Refinery. The team attends California Polytechnic State University, San Luis Obispo. The project involved designing and building a valve efficiency testing device. The goal was to create a finished test device that can be used in the Phillips 66 Rodeo Refinery machine shop to test reciprocating compressor valves before they are installed. The purpose of this document is to describe the manufacturing and design verification activities that have been completed since Critical Design …

Perforated Groove Cam Lock, Matthew J. Redmond, Samuel A. Potter, Dylan Weiglein, Andrew Reese

Mechanical Engineering

NASA Artemis III astronauts need a way to attach and detach various tools to an extension handle to be used during lunar EVA sample collection. Because lunar dust is so harsh and abundant, mechanisms must be designed to function regardless of the number of contact particulates. Past designs used on the Apollo missions proved to be problematic for their operators, opening the door for innovative improvement. A new mechanism has been proposed that directly addresses the performance issues of the original handle extension mentioned in NASA’s Apollo mission reports. The new mechanism boasts an open design that promotes dust tolerance …

Development Of Mirror Flexures For Use In The Muvi Instrument, Colin W. Harrop

Master's Theses

The Miniaturized Ultraviolet Imager (MUVI), is a compact wide field UV imaging instrument in development at UC Berkeley Space Sciences Laboratory and Cal Poly, San Luis Obispo. MUVI is designed to fit in a 2U CubeSat form factor and provide wide field, high resolution images of the ionosphere at far ultraviolet wavelengths. This thesis details the design and analyses of MUVI’s deployable cover mirror mounting flexures. Three different flexure geometries were evaluated, an optimal candidate was determined based on a number of criteria including isolation of vibration and stress to the mirrors, manufacturability and cost. The design of the flexure …