Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Materials Science and Engineering (55)
- Ceramic Materials (22)
- Metallurgy (14)
- Aerospace Engineering (6)
- Computer Sciences (3)
-
- Physical Sciences and Mathematics (3)
- Biology (2)
- Business (2)
- Electrical and Computer Engineering (2)
- Life Sciences (2)
- Applied Mechanics (1)
- Civil and Environmental Engineering (1)
- Education (1)
- Engineering Education (1)
- Engineering Mechanics (1)
- Engineering Science and Materials (1)
- Higher Education (1)
- Mechanics of Materials (1)
- Structural Materials (1)
- Keyword
-
- Additive manufacturing (11)
- Solid Freeform Fabrication (9)
- Deposition (7)
- 3D printers (6)
- Rapid Prototyping (6)
-
- Binders (5)
- Extrusion (5)
- Laser heating (5)
- Manufacture (5)
- Mechanical properties (5)
- Selective laser sintering (5)
- Additive Manufacturing (4)
- Additives (4)
- Bioactive glass (4)
- Fabrication (4)
- Ice Patterns (4)
- Laser Deposition (4)
- Laser metal deposition (4)
- Rapid Tooling (4)
- Repair (4)
- Sintering (4)
- Ceramic (3)
- Compressive strength (3)
- Investment Casting (3)
- Laser Metal Deposition (3)
- Layered Manufacturing (3)
- Mechanical Properties (3)
- Metallic glass (3)
- Microstructure (3)
- Process parameters (3)
Articles 61 - 90 of 209
Full-Text Articles in Manufacturing
Building Zr-Based Metallic Glass Part On Ti-6al-4v Substrate By Laser-Foil-Printing Additive Manufacturing, Yingqi Li, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Building Zr-Based Metallic Glass Part On Ti-6al-4v Substrate By Laser-Foil-Printing Additive Manufacturing, Yingqi Li, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Through using Zr intermediate layers, Zr52.5Ti5Al10Ni14.6Cu17.9 metallic glass (MG) parts are successfully built on Ti-6Al-4V substrates by laser-foil-printing (LFP) additive manufacturing technology in which MG foils are laser welded layer-by-layer onto the substrate. The printed MG part is free of porosity, cracking and crystallization; additionally, its glass transition temperature, crystallization temperature, micro-hardness, and tensile strength are very similar to the original MG material. The Zr intermediate layers are aimed at preventing direct interaction between the first layer of MG foil and the Ti substrate; otherwise, the welded MG foils would peel …
Fiber-Fed Laser-Heated Process For Printing Transparent Glass, John M. Hostetler, Jonathan T. Goldstein, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Fiber-Fed Laser-Heated Process For Printing Transparent Glass, John M. Hostetler, Jonathan T. Goldstein, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
This paper presents the Additive Manufacturing (AM) of glass using a fiber-fed process. Glass fiber with a diameter of 100 μm is fed into a laser generated melt pool. A CO2 laser beam is focused on the intersection between the fiber and the work piece which is positioned on a four-axis computer controlled stage. The laser energy at λ=10.6 μm is directly absorbed by the silica and locally heats the glass above the working point. By carefully controlling the laser power, scan speed, and feed rate, bubble free shapes can be deposited including trusses and basic lenses. Issues unique …
Investigation Of Build Strategies For A Hybrid Manufacturing Process Progress On Ti-6al-4v, Lei Yan, Leon Hill, Frank W. Liou, Joseph William Newkirk
Investigation Of Build Strategies For A Hybrid Manufacturing Process Progress On Ti-6al-4v, Lei Yan, Leon Hill, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The various processing parameters of a hybrid manufacturing process, including deposition and machining, is being investigated with a Design of Experiment (DoE). The intent was to explore the effect of different build strategies on the final part’s Vickers hardness, tensile test, fatigue life, and microstructure. From this experiment, the processing parameters can be linked to various mechanical properties. This will lead to the ability to create a combination of deposition and machining parameters, which will result in improved mechanical properties.
Metallic Components Repair Strategies Using The Hybrid Manufacturing Process, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou
Metallic Components Repair Strategies Using The Hybrid Manufacturing Process, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The hybrid manufacturing process which integrates additive manufacturing with subtractive machining is competitive and promising in component repair. To automate this process, detecting the missing volume and generating the deposition tracks is the key. In this study, strategies for repairing defects on flat and non-flat surfaces were investigated. A cost-effective reverse engineering tool was utilized to reconstruct STL models of damaged objects. Point data of the fracture surface on flat surfaces was obtained to generate the tool path for material building up. For defects on non-flat surfaces, the damaged model was best-fitted with the nominal model. Then both models were …
Defects Classification Of Laser Metal Deposition Using Acoustic Emission Sensor, Haythem Gaja, Frank W. Liou
Defects Classification Of Laser Metal Deposition Using Acoustic Emission Sensor, Haythem Gaja, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Laser metal deposition (LMD) is an advanced additive manufacturing (AM) process used to build or repair metal parts layer by layer for a range of different applications. Any presence of deposition defects in the part produced causes change in the mechanical properties and might cause failure to the part. In this work, defects monitoring system was proposed to detect and classify defects in real time using an acoustic emission (AE) sensor and an unsupervised pattern recognition analysis. Time domain and frequency domain, and relevant descriptors were used in the classification process to improve the characterization and the discrimination of the …
Characterization Of Heat-Affected Powder Generated During Selective Laser Melting Of 304l Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk
Characterization Of Heat-Affected Powder Generated During Selective Laser Melting Of 304l Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The selective laser melting (SLM) process is an Additive Manufacturing (AM) technique that uses a laser to fuse successive layers of powder into near fully dense components. Due to the large energy input from the laser during processing, vaporization and instabilities in the melt pool occur causing the formation of condensate and laser spatter, collectively known as heat-affected powder. Since heat-affected powder settles into the powder bed, the properties of the unconsolidated powder may be altered compromising its reusability. In this study, characterization of 304L heat-affected powder was performed through particle size distribution measurements, x-ray diffraction, metallography, energy-dispersive spectroscopy mapping, …
Influence Of Gage Length On Miniature Tensile Characterization Of Powder Bed Fabricated 304l Stainless Steel, Sreekar Karnati, Jack L. Hoerchler, Frank W. Liou, Joseph William Newkirk
Influence Of Gage Length On Miniature Tensile Characterization Of Powder Bed Fabricated 304l Stainless Steel, Sreekar Karnati, Jack L. Hoerchler, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Miniature tensile specimens with varying aspect ratios were fabricated from 304L stainless steel (SS) made using powder bed additive manufacturing (AM) process. The tensile characteristics measured from these specimens were analyzed to assess the impact of gage length. The study found no impact upon varying gage length on yield and ultimate strength measurements. However, a significant impact was observed on strain measurements. This data was also used to perform Weibull statistics to estimate the stochastic performance of the material. Fractography was performed to visually identify the types of flaws. A comparative study with specimens fabricated from cold rolled annealed 304 …
Relating Processing Of Selective Laser Melted Structures To Their Material And Modal Properties, Nicholas E. Capps, James S. Urban, Brian M. West, Cody S. Lough, Adriane Repogle, Troy Hartwig, Ben Brown, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Relating Processing Of Selective Laser Melted Structures To Their Material And Modal Properties, Nicholas E. Capps, James S. Urban, Brian M. West, Cody S. Lough, Adriane Repogle, Troy Hartwig, Ben Brown, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Selective Laser Melting (SLM) creates metal parts by fusing powder layer-by-layer. It provides significant design flexibility and the possibility of low-volume production. The engineering properties of the printed metal are a function of the local thermal history. This creates challenges for validating Additively Manufactured (AM) parts. This paper correlates the engineering properties (density, modulus, yield strength and ultimate strength) for tensile test specimens created with different process parameters with the resonant frequencies determined using modal testing. The paper shows that yield and ultimate strengths for these specimens can be determined using modal analysis.
Thermal Modeling Of 304l Stainless Steel Selective Laser Melting, Lan Li, Cody S. Lough, Adriane Repogle, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Thermal Modeling Of 304l Stainless Steel Selective Laser Melting, Lan Li, Cody S. Lough, Adriane Repogle, Douglas A. Bristow, Robert G. Landers, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
This paper describes the continuum thermal modeling of the Selective Laser Melting (SLM) process for 304L stainless steel using Abaqus. Temperature dependent thermal properties are obtained from literature and incorporated into the model capturing the change from powder to fully dense stainless steel. The thermal model predicts the temperature history for multi-track scans under different process parameters (laser power, effective scanning speed, hatch spacing) which is used to extract the melt-pool size, solidification rate, and temperature gradients. These are compared to experimental results obtained from a Renishaw AM250 in terms of the melt pool size, grain structure, and cell spacing. …
Review Of Am Simulation Validation Techniques, Aaron Flood, Frank W. Liou
Review Of Am Simulation Validation Techniques, Aaron Flood, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Due to the complexity of Additive Manufacturing (AM), it can require many trial runs to obtain processing parameters which produce a quality build. Because of this trial and error process, the drive for simulations of AM has grown significantly. Simulations only become useful to researchers if it can be shown that they are true representations of the physical process being simulated. All simulations have different methods of validation to show that they are an accurate representations of the process. This paper explores the various methodologies for validation of laser based metal AM simulations, focusing mainly on the modeling of the …
Towards Defect Detection In Metal Slm Parts Using Modal Analysis "Fingerprinting", James Urban, Nick E. Capps, Brian M. West, Troy Hartwig, Ben Brown, Robert G. Landers, Douglas A. Bristow, Edward C. Kinzel
Towards Defect Detection In Metal Slm Parts Using Modal Analysis "Fingerprinting", James Urban, Nick E. Capps, Brian M. West, Troy Hartwig, Ben Brown, Robert G. Landers, Douglas A. Bristow, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The validation of Additively Manufactured (AM) materials is a difficult and expensive process because the local engineering properties are a function of the thermal history. The thermal history varies with the process parameters, as well as the part geometry. This paper presents a case study using modal testing to identify defects in realistic AM parts. A setup consisting of a Scanning Laser Doppler Vibrometer (LDV) was used to identify the resonant frequencies for several geometrically identical parts on a build plate. Parts with suboptimal process parameters from purposely varying the process parameters, are identified by a shift in the mode …
Fabricating Zirconia Parts With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas
Fabricating Zirconia Parts With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Ceramic On-Demand Extrusion (CODE) is an extrusion-based additive manufacturing process recently developed for fabricating dense, functional ceramic components. This paper presents a further development of this process and focuses on fabricating 3 mol% yttria-stabilized zirconia (3YSZ) components that cannot be fabricated without using support structures. The 3YSZ paste is deposited through the main nozzle, and a polycaprolactone (PCL) pellet feedstock is melted and deposited through an auxiliary nozzle to build support structures. After a green part is printed and dried, the support structures are removed by heating the part to ~70 ⁰C to melt the PCL. The part is then …
Development Of A Hybrid Manufacturing Process For Precision Metal Parts, Leon Hill, Todd E. Sparks, Frank W. Liou
Development Of A Hybrid Manufacturing Process For Precision Metal Parts, Leon Hill, Todd E. Sparks, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
This paper summarizes the research and development of a hybrid manufacturing process to produce fully dense metal parts with CNC-level precision. High performance metals, such as titanium alloys, nickel superalloys, tool steels, stainless steels, etc. can benefit from this process. Coupling the additive and the subtractive processes into a multi-axis workstation, the hybrid process, can produce and repair metal parts with accuracy. The surface quality of the final product is similar to the industrial milling capability. To achieve such a system, issues of the metal deposition process and the automated process planning of the hybrid manufacturing process will be discussed.
A Two-Dimensional Simulation Of Grain Structure Growth Within Substrate And Fusion Zone During Direct Metal Deposition, Jingwei Zhang, Wei Li, Frank W. Liou, Joseph William Newkirk
A Two-Dimensional Simulation Of Grain Structure Growth Within Substrate And Fusion Zone During Direct Metal Deposition, Jingwei Zhang, Wei Li, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
In this paper, a predictive model based on a cellular automaton (CA)-finite element (FE) method has been developed to simulate thermal history and microstructure evolution during metal solidification for a laser-based additive manufacturing process. The macroscopic FE calculation that is validated by thermocouple experiment is designed to update the temperature field and a high cooling rate. A cellular automata-finite element (CAFE) method is developed to describe grain growth in the fusion zone. In the mesoscopic CA model, heterogeneous nucleation sites, grain growth orientation and rate, epitaxial growth, remelting of preexisting grains, metal addition, grain competitive growth, and columnar to equiaxed …
Mechanical Properties Of 304l Parts Made By Laser-Foil-Printing Technology, Chia-Hung Hung, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Mechanical Properties Of 304l Parts Made By Laser-Foil-Printing Technology, Chia-Hung Hung, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Laser-Foil-Printing (LFP) is a novel laminated object manufacturing process for metal additive manufacturing. It fabricates three-dimensional metal parts by using a dual-laser system to weld and cut metal foils layer by layer. A main advantage of LFP is the higher cooling rate compared to powder-based laser additive manufacturing processes due to the thermal conductivity difference between foil and powder. This study focuses on the mechanical properties of 304L stainless steel parts built by the LFP process. The experimental results indicate that the yield strength and ultimate tensile strength of LFP fabricated 304L SS parts are higher by 9% and 8% …
Construction Of Metallic Glass Structures By Laser-Foil-Printing Technology, Yiyu Shen, Yingqi Li, Hai-Lung Tsai
Construction Of Metallic Glass Structures By Laser-Foil-Printing Technology, Yiyu Shen, Yingqi Li, Hai-Lung Tsai
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Metallic glasses (MGs) have superior mechanical properties such as high tensile strength, hardness, and corrosion resistance, as compared to crystalline metals. Although newly developed MGs have significantly reduced critical cooling rates down to 10 K/s, products of MGs are still limited to simple geometries such as foils/plates or rods with thin section-thickness which is mainly caused by the decrease of thermal conductivities of the new MGs. Recently, we developed a new Laser-foil-printing (LFP) additive manufacturing technology which welds foils, layer by layer, to construct desired 3D structures. With the LFP and Zr-based amorphous foils, 3D, large amorphous structures with complex …
Effect Of Optimizing Particle Size In Laser Metal Deposition With Blown Pre-Mixed Powders, Wei Li, Jingwei Zhang, Xinchang Zhang, Sreekar Karnati, Frank W. Liou
Effect Of Optimizing Particle Size In Laser Metal Deposition With Blown Pre-Mixed Powders, Wei Li, Jingwei Zhang, Xinchang Zhang, Sreekar Karnati, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Functionally Graded Material (FGM) is often fabricated by Laser metal deposition with pre-mixed multiple powders (PMM-powder). Since the supplied PMM-powder directly affects FGM’s composition, investigation on PMM-powder’s property is greatly needed. This paper employed experimental method to observe an important problem: PMM-powder separation in fabricating FGM. A novel particle size optimization method was introduced as solution to eliminate the powder separation. Pre-mixed pure Cu and 4047 Al powders were used to do two experiments. The first experiment result disclosed the existence of powder separation. By optimizing the particle size, the PMM-powder separation was effectively solved in the second experiment result.
Investigation Of Heat-Affected 304l Ss Powder And Its Effect On Built Parts In Selective Laser Melting, Caitlin S. Kriewall, Austin T. Sutton, Ming-Chuan Leu, Joseph William Newkirk, Ben Brown
Investigation Of Heat-Affected 304l Ss Powder And Its Effect On Built Parts In Selective Laser Melting, Caitlin S. Kriewall, Austin T. Sutton, Ming-Chuan Leu, Joseph William Newkirk, Ben Brown
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Selective laser melting (SLM) is a powder bed based additive manufacturing process in which a layer of powder is laid over the surface of a substrate and a laser with sufficient energy is employed to selectively melt particles to build a part layer by layer. During the SLM process, dark smoke was observed coming off of the powder bed surface where the laser was interacting with powder. This phenomenon resulted from heat-affected powder that was visibly different than the base powder. Since the concentration of the heat-affected powder differs throughout the build chamber as a result of the recirculating argon …
Modeling And Experimental Investigation Of Pre-Mixed Multi-Powder Flow In Fabricating Functional Gradient Material By Laser Metal Deposition Process, Wei Li, Jingwei Zhang, Sreekar Karnati, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, W. L. Seufzer
Modeling And Experimental Investigation Of Pre-Mixed Multi-Powder Flow In Fabricating Functional Gradient Material By Laser Metal Deposition Process, Wei Li, Jingwei Zhang, Sreekar Karnati, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, W. L. Seufzer
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Laser Metal Deposition (LMD) is an effective process to fabricate Functionally Graded Material (FGM) from pre-mixed powders. Since the supplied multi-powder directly affects the deposited FGM’s composition, investigation on Pre-Mixed Multi-Powder (PMMP) flow during LMD is greatly needed. This paper presents a comprehensive numerical PMMP flow model. By solving discrete particle force balance equations coupled with continuity equations and momentum equations for carrier gas, the dynamic behavior of PMMP flow through powder feeder tube and out of nozzle was calculated. With this model, the particle sizes of multi-powder were optimized to obtain considered FGM composition. To verify the modeling results, …
Investigation Of Tensile Properties Of Bulk And Slm Fabricated 304l Stainless Steel Using Various Gage Length Specimens, Sreekar Karnati, I. Axelsen, Frank W. Liou, Joseph William Newkirk
Investigation Of Tensile Properties Of Bulk And Slm Fabricated 304l Stainless Steel Using Various Gage Length Specimens, Sreekar Karnati, I. Axelsen, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The complex solidification dynamics and thermal cycling during Selective Laser Melting process is expected to result in non-equilibrium material characteristics. There is an essential need for characterization techniques which are critical towards the estimation of anisotropies. The current investigation is targeted towards establishing tensile testing methodologies and their relation to differing gage lengths. Dog-bone shaped specimen designs with gage lengths of 1”, 0.3” and 0.12” were employed in this research. The characterization was performed on hot rolled-annealed 304 stainless and SLM fabricated 304L stainless. It was theorized that smaller gage length specimens would be instrumental in mapping material property anisotropy …
Properties Of Partially Stabilized Zirconia Components Fabricated By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Ming-Chuan Leu, Greg Hilmas, Jeremy Lee Watts
Properties Of Partially Stabilized Zirconia Components Fabricated By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Ming-Chuan Leu, Greg Hilmas, Jeremy Lee Watts
Mechanical and Aerospace Engineering Faculty Research & Creative Works
The Ceramic On-Demand Extrusion (CODE) process is a novel additive manufacturing process for fabricating dense ceramic components from aqueous pastes of high solids loading. In this study, 3 mol% Y2O3 stabilized tetragonal zirconia polycrystal (3Y-TZP) parts were fabricated using the CODE process. The parts were then dried in a humidity controlled environmental chamber and sintered under atmospheric pressure. Mechanical properties of the sintered parts were examined using ASTM standard test techniques, including density, Young’s modulus, flexural strength, Weibull modulus, fracture toughness and Vickers hardness. The microstructure was analyzed, and grain size was measured using scanning electron microscopy. …
Laser Line Scan Characterization Of Geometric Profiles In Laser Metal Deposition, Michelle L. Gegel, A. Nisbett, Douglas A. Bristow, Robert G. Landers
Laser Line Scan Characterization Of Geometric Profiles In Laser Metal Deposition, Michelle L. Gegel, A. Nisbett, Douglas A. Bristow, Robert G. Landers
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Laser Metal Deposition (LMD) is an additive manufacturing process in which material is deposited by blowing powdered metal into a melt pool formed by a laser beam. When fabricating parts, the substrate is subjected to motion control such that the melt pool traces a prescribed path to form each part layer. Advantages of LMD include relatively efficient powder usage, the ability to create functionally-graded parts and the ability to repair high-value parts. The process, however, is sensitive to variations in process parameters and a need for feedback measurements and closed-loop control has been recognized in the literature [1, 2]. To …
Effect Of Powder Particle Size On The Fabrication Of Ti-6al-4v Using Laser Metal Deposition From Elemental Powder Mixture, Xueyang Chen, Lei Yan, Wei Li, Frank W. Liou, Joseph William Newkirk
Effect Of Powder Particle Size On The Fabrication Of Ti-6al-4v Using Laser Metal Deposition From Elemental Powder Mixture, Xueyang Chen, Lei Yan, Wei Li, Frank W. Liou, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Direct Laser Metal Deposition (LMD) was used to fabricate thin-wall Ti-6Al-4V using the powder mixture of Ti-6 wt.%Al-4 wt.%V. Scanning electron microscopy (SEM), optical microscopy (OM) and energy dispersive spectroscopy (EDS) were employed to examine the chemical composition and microstructure of the as-deposited sections. Vickers hardness tests were then applied to characterize the mechanical properties of the deposit samples which were fabricated using pre-mixed elemental powders. The EDS line scans indicated that the chemical composition of the samples was homogenous across the deposit. X-ray diffraction (XRD) was used for the phase identification. After significant analysis, some differences were observed among …
Powders For Additive Manufacturing Processes: Characterization Techniques And Effects On Part Properties, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk
Powders For Additive Manufacturing Processes: Characterization Techniques And Effects On Part Properties, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Powder-bed based Additive Manufacturing is a class of Additive Manufacturing (AM) processes that bond successive layers of powder by laser melting to facilitate the creation of parts with complex geometries. As AM technology transitions from the fabrication of prototypes to end-use parts, the understanding of the powder properties needed to reliably produce parts of acceptable quality becomes critical. Consequently, this has led to the use of powder characterization techniques such as scanning electron microscopy (SEM), laser light diffraction, x-ray photoelectron spectroscopy (XPS), and differential thermal analysis (DTA) to both qualitatively and quantitatively study the effect of powder characteristics on part …
3d Printing Of A Polymer Bioactive Glass Composite For Bone Repair, Caroline Murphy, Krishna C. R. Kolan, M. Long, Ming-Chuan Leu, Julie A. Semon, D. E. Day
3d Printing Of A Polymer Bioactive Glass Composite For Bone Repair, Caroline Murphy, Krishna C. R. Kolan, M. Long, Ming-Chuan Leu, Julie A. Semon, D. E. Day
Mechanical and Aerospace Engineering Faculty Research & Creative Works
A major limitation of synthetic bone repair is insufficient vascularization of the interior region of the scaffold. In this study, we investigated the 3D printing of adipose derived mesenchymal stem cells (AD-MSCs) with polycaprolactone (PCL)/bioactive glass composite in a single process. This offered a three-dimensional environment for complex and dynamic interactions that govern the cell’s behavior in vivo. Borate based bioactive (13-93B3) glass of different concentrations (10 to 50 weight %) was added to a mixture of PCL and organic solvent to make an extrudable paste. AD-MSCs suspended in Matrigel was extruded as droplets using a second syringe. Scaffolds measuring …
Selective Laser Sintering Of Low Density, Low Coefficient Of Thermal Expansion Silica Parts, John M. Hostetler, Jonathan T. Goldstein, Augustine M. Urbas, Rodrigo E. Gutierrez, Theresa E. Bender, Charles S. Wojnar, Edward C. Kinzel
Selective Laser Sintering Of Low Density, Low Coefficient Of Thermal Expansion Silica Parts, John M. Hostetler, Jonathan T. Goldstein, Augustine M. Urbas, Rodrigo E. Gutierrez, Theresa E. Bender, Charles S. Wojnar, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
This paper presents a study of selective laser sintering of silica-gel. The objective of this work is to investigate a technique to create free-form, low to zero coefficient of thermal expansion structures. This offers potential cost savings over the conventional casting of large pieces of glass-ceramic followed by machining lightening features. In this paper, A CO2 laser is coupled through a gantry system and focused onto a binder-free silica-gel powder bed (15-40 μm particles). Prior to writing each layer, powder is dispensed by sifting it onto the build platform as opposed to a conventional wiper system. This avoids contacting …
Bubble Formation In Additive Manufacturing Of Borosilicate Glass, Junjie Luo, Theresa Bender, Douglas A. Bristow, Robert G. Landers, Jonathan T. Goldstein, Augustine M. Urbas, Edward C. Kinzel
Bubble Formation In Additive Manufacturing Of Borosilicate Glass, Junjie Luo, Theresa Bender, Douglas A. Bristow, Robert G. Landers, Jonathan T. Goldstein, Augustine M. Urbas, Edward C. Kinzel
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Entrapped bubbles are an important problem in conventional glass manufacturing. It is also a significant factor determining the quality of glass products produced using additive manufacturing (AM). This paper reports on the bubble formation and entrapment in filament-fed AM printing of borosilicate glass. This process involves maintaining a local molten region using a CO2 laser. A 2 mm filament is fed continuously into the molten region while CNC stages position the workpiece relative to the laser and filament feed. Two different bubble regimes are identified in experiments with borosilicate glass. These regimes can be related to different physical phenomena, …
A Smooth Toolpath Generation Method For Laser Metal Deposition, Renwei Liu, Zhiyuan Wang, Yunlu Zhang, Todd E. Sparks, Frank W. Liou
A Smooth Toolpath Generation Method For Laser Metal Deposition, Renwei Liu, Zhiyuan Wang, Yunlu Zhang, Todd E. Sparks, Frank W. Liou
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Laser metal deposition (LMD), also known as direct metal deposition (DMD) or laser engineered net shaping (LENS), which uses a laser beam to form a melt pool on a metallic substrate, into which powder or wire is fed. The conventional contour and zigzag toolpath pattern for LMD are discontinuous at turn points or corner points. The discontinuous toolpath causes uneven deposition, which brings height variation and porosity problems. This paper aims to develop a smooth toolpath generation method for LMD to improve the deposition quality. A parametric curve equation based on trigonometric functions is derived and built. It can be …
Integration Of Voxel Based And Source Based Representation For Computer Aided Design Of Functional Gradient Materials, Fangquan Wang, Frank W. Liou, Todd E. Sparks
Integration Of Voxel Based And Source Based Representation For Computer Aided Design Of Functional Gradient Materials, Fangquan Wang, Frank W. Liou, Todd E. Sparks
Mechanical and Aerospace Engineering Faculty Research & Creative Works
Functionally Gradient Materials (FGMs) feature smooth transition from one material to another within a single object. FGMs modeling is considered to be one of the new challenges in Computer Aided Design area. To overcome this challenge, this paper presents the integration of a source-based and voxel-based approach to model FGMs. The input of STL format can be meshed and voxelized. The material composition and material varying information in each voxel can be generated from control sources. In addition, surface source is used to define default material information, and several filtering methods, including Gaussian filter, Average filter, are applied to blend …
A Novel Extrusion-Based Additive Manufacturing Process For Ceramic Parts, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Greg Hilmas
A Novel Extrusion-Based Additive Manufacturing Process For Ceramic Parts, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Greg Hilmas
Mechanical and Aerospace Engineering Faculty Research & Creative Works
An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density is introduced in this paper. In this process, an aqueous paste of ceramic particles with a very low binder content ( < 1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, it is surrounded by oil (to a level just below the top surface of most recent layer) to preclude non-uniform evaporation from the sides. Infrared radiation is then used to partially, and uniformly, dry the just-deposited layer so that the yield stress of the paste increases and the part maintains its shape. The same procedure is repeated for every layer until part fabrication is completed. Several sample parts for various applications were produced using this process and their properties were obtained. The results indicate that the proposed method enables fabrication of large, dense ceramic parts with complex geometries.