Electrical and Computer Engineering Commons^™

A Method To Improve Interest Point Detection And Its Gpu Implementation, Prabakar Karuppannan Gunashekhar

LSU Master's Theses

Interest point detection is an important low-level image processing technique with a wide range of applications. The point detectors have to be robust under affine, scale and photometric changes. There are many scale and affine invariant point detectors but they are not robust to high illumination changes. Many affine invariant interest point detectors and region descriptors, work on the points detected using scale invariant operators. Since the performance of those detectors depends on the performance of the scale invariant detectors, it is important that the scale invariant initial stage detectors should have good robustness. It is therefore important to design …

Effect Of Electrical Vehicles On Residential Distribution Systems, Paul Haley

LSU Master's Theses

This thesis focuses on the present state of electrical vehicles (EVs) in the market and the effects that these vehicles could have on residential distribution systems. The current EVs available on the market and the current level of market penetration were investigated. Advantages and disadvantages of EVs from a consumer and governmental perspective were identified. The efficiencies of the whole energy delivery process of electrical vehicles and gasoline vehicles were estimated. Efficiency estimation was used to estimate the impact of EVs on the consumption of fossil fuels and emission of greenhouse gases. Measurement of an EV battery charging cycle and …

Consensusability Of Discrete-Time Multi-Agent Systems, Abhishek Pandey

LSU Master's Theses

The study of multi-agent systems (MAS) focuses on systems in which many intelligent agents interact within an environment. The agents are considered to be autonomous entities. MAS can be used to solve problems that are difficult or impossible for an individual agent to solve. The main feature which is achieved when developing MAS, if they work, is flexibility, since MAS can be added to, modified and reconstructed, without the need for detailed rewriting of the application. MAS can manifest self-organization as well as self-steering related complex behaviors even when the individual strategies of all their agents are simple. The goal …

Reactive Power Considerations In Reliability Analysis Of Solar Photovoltaic Systems, Dattatray N. Gaikwad

LSU Master's Theses

Reliability is one of the key aspects of power system operation and therefore reliability analysis techniques are well developed. However reliability analysis conventionally takes into account active power and limited attention has been given to reactive power. Reactive power is very essential in maintaining voltage stability of power systems. The voltage constraint at network can restricts active power delivery to the loads and could result in forced load curtailment. This research investigates the effect of reactive power shortage on reliability of power systems with significant penetration of PV cells. The reactive power issues become more significant in distributed generation using …

Impact Of Plug-In Electrical Cars On Energy Demand, On Power System And On Environment, Sital Tiwari

LSU Master's Theses

The use of an electric vehicle (EV) over a gasoline vehicle (GV) is often portrayed as environment friendly or green movement ignoring how the electricity is produced. EVs get credit for preserving green environment and preventing global warming by minimizing the dependency on oil. Most of the time, these assumptions that favor EV are not well justified. Therefore, proper studies on the impact of electric vehicles on energy demand, on environment and on power system are necessary before reaching to any conclusion. This thesis explores the possibility of energy consumption pattern shift within the different sectors of energy use due …

Electric Elevator Drive With Position Control, Peter James Ford

LSU Master's Theses

This thesis is a study on the implementation of an elevator’s position-controlled electric drive. The information contained within this paper serves as a framework to expand the usefulness of electric drives through the addition of digital control systems and switching power supplies. The tangible example of an elevator driven by a permanent-magnet DC motor is used for this paper so that students may relate to the work and apply it to their future projects. The tasks to be accomplished in order to achieve an electric elevator drive with position control are: determining the parameters of the permanent-magnet DC motor, designing …

An Electronic Architecture For Mediating Digital Information In A Hallway Fac̦Ade, Narendra Nallapeta Aswathanarayana Setty

LSU Master's Theses

Ubiquitous computing requires integration of physical space with digital information. This presents the challenges of integrating electronics, physical space, software and the interaction tools which can effectively communicate with the audience. Many research groups have embraced different techniques depending on location, context, space, and availability of necessary skills to make the world around us as an interface to the digital world. Encouraged by early successes and fostered by project undertaken by tangible visualization group. We introduce an architecture of Blades and Tiles for the development and realization of interactive wall surfaces. It provides an inexpensive, open-ended platform for constructing large-scale …

Design Of Reverse Converters For The Multi-Moduli Residue Number Systems With Moduli Of Forms 2a, 2b - 1, 2c + 1, Naveen Kumar Samala

LSU Master's Theses

Residue number system (RNS) is a non-weighted integer number representation system that is capable of supporting parallel, carry-free and high speed arithmetic. This system is error-resilient and facilitates error detection, error correction and fault tolerance in digital systems. It finds applications in Digital Signal Processing (DSP) intensive computations like digital filtering, convolution, correlation, Discrete Fourier Transform, Fast Fourier Transform, etc. The basis for an RNS system is a moduli set consisting of relatively prime integers. Proper selection of this moduli set plays a significant role in RNS design because the speed of internal RNS arithmetic circuits as well as the …

Linear Pm Generator For Wave Energy Conversion, Rajkumar Parthasarathy

LSU Master's Theses

The main objective of this thesis is to design a selected version of linear PM generator and to determine the electromechanical characteristics at variable operating conditions. To reach this objective, the linear generator with quasi-flat linear machine structure was selected and designed using the magnetic circuit theory. By applying 2-D and 3-D FEM the magnetic circuit was optimized and parameters of equivalent circuit were determined. The performance of generator operation are analyzed in steady-state and in dynamic conditions using MATLAB/SIMULINK. The analysis has been carried out at the secondary variable speed, which is changing sinusoidally according to the motion of …

Non-Rigid Registration Of 2-D/3-D Dynamic Data With Feature Alignment, Huanhuan Xu

LSU Master's Theses

In this work, we are computing the matching between 2D manifolds and 3D manifolds with temporal constraints, that is we are computing the matching among a time sequence of 2D/3D manifolds. It is solved by mapping all the manifolds to a common domain, then build their matching by composing the forward mapping and the inverse mapping. At first, we solve the matching problem between 2D manifolds with temporal constraints by using mesh-based registration method. We propose a surface parameterization method to compute the mapping between the 2D manifold and the common 2D planar domain. We can compute the matching among …

Micro Grid Stability Improvements By Employing Storage, Sumiti Lamichhane

LSU Master's Theses

Storage devices can be used in a power gird to store the excess energy when the energy production is high and the demand is low and utilize the stored energy when the produced energy cannot meet the high demands of the consumers. This thesis represents a micro grid consisting of a conventional synchronous generator, as well as renewable energy sources, energy storage, and loads in order to investigate the effective energy flow control and transient stability improvement by employing thermal storage. Thermal storage, unlike electrical one (such as battery) is more environmental friendly, has longer life span, and is more …

Characterization Of Nanogumbos For Future Electronic Devices, Naveen Narayan Jagadish

LSU Master's Theses

In our work on hybrid (organic-inorganic) electronic materials (HEMs), we have developed a reasonably facile method for characterizing GUMBOS or a Group of Uniform Materials Based on Organic Salts. In addition to the versatility of traditional ionic liquids (i.e.-solubility, melting point, viscosity), NanoGUMBOS are functionalizable to exhibit properties such as fluorescence, magnetic susceptibility, and even antimicrobial activity. However, given our interest in the electrical properties of HEMs, we have made first-time measurements of NanoGUMBOS, using conductive probe Atomic Force Microscopy (CP-AFM), in order to deduce their room temperature current-voltage characteristics. In conjunction with the nanoscale imaging of AFM alone, we …

Nano-Scale Rf/Microwave Characterization Of Materials' Electromagnetic Properties, Joshua Allen Myers

Browse all Theses and Dissertations

There are two words that describe the direction of today's electronic technology, smaller and faster. With the ever decreeing size scientists and engineers must have a way to characterize materials in the nm range. In this thesis characterization of nano-materials is discussed based on scanning probe microscopy and an in-depth look at RF/microwave frequencies by scanning microwave microscopy. Recently, low-temperature spin-sprayed ferrite films (Fe3O4) with a high self-biased magnetic anisotropy field have been reported, showing FMR frequency>5 GHz. Such films hold great potential for RF/microwave devices and find immediate applications. In this study, we performed in situ scanning microwave …

Self-Assembly Of Single Dielectric Nanoparticle Layers And Integration In Polymer-Based Solar Cells, Jonathan E. Allen, Biswajit Ray, Mohammad R. Khan, Kevin G. Yager, Muhammad Ashraful Alam, Charles T. Black

Birck and NCN Publications

A single, self-assembled layer of highly uniform dielectric alumina nanoparticles improves the photovoltaic performance of organic semiconductor bulk heterojunction solar cells. The block copolymer based self-assembly approach is readily amenable to the large areas required for solar cell fabrication. A fraction of the performance gain results from incident light scattering which increases active layer absorption and photocurrent output, consistent with device simulations. The nanoparticle layer also roughens the device electrode surface, increasing contact area and improving device fill factor through more efficient charge collection

Can Morphology Tailoring Improve The Open Circuit Voltage Of Organic Solar Cells?, Biswajit Ray, Mark S. Lundstrom, Muhammad A. Alam

Department of Electrical and Computer Engineering Faculty Publications

While the effect of interfacial morphology on the short circuit current (ISC) of organic photovoltaic devices (OPVs) is well known, its impact on open circuit voltage (VOC) and fill-factor (FF) are less clear. Since the output power of a solar cell Pout 1/4 ISCVOCFF, such understanding is critical for designing high-performance, morphology-engineered OPVs. In this letter, we provide an explicit analytical proof that any effort to radically improve VOC by tailoring bulk heterojunction morphology is futile, because any increase in ISC due to larger interface area is counterbalanced by corresponding increase in recombination current, so that the upper limit of …

Thermal Conductivity Of Bulk And Thin-Film Silicon: A Landauer Approach, Changwook Jeong, Supriyo Datta, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

The question of what fraction of the total heat flow is transported by phonons with different mean-free-paths is addressed using a Landauer approach with a full dispersion description of phonons to evaluate the thermal conductivities of bulk and thin film silicon. For bulk Si, the results reproduce those of a recent molecular dynamic treatment showing that about 50% of the heat conduction is carried by phonons with a mean-free-path greater than about 1 μm. For the in-plane thermal conductivity of thin Si films, we find that about 50% of the heat is carried by phonons with mean-free-paths shorter …

Computational Study Of Energy Filtering Effects In One-Dimensional Composite Nano-Structures, Raseong Kim, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

Possibilities to improve the Seebeck coefficient S versus electrical conductance G trade-off of diffusive composite nano-structures are explored using an electro-thermal simulation framework based on the non-equilibrium Green’s function method for quantum electron transport and the lattice heat diffusion equation. We examine the role of the grain size d, potential barrier height UB, grain doping, and the lattice thermal conductivity jL using a one-dimensional model structure. For a uniform jL, simulation results show that the power factor of a composite structure may be improved over bulk with the optimum UB being about kBT, where kB and T are the Boltzmann …

On The Best Bandstructure For Thermoelectric Performance: A Landauer Perspective, Changwook Jeong, Raseong Kim, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

The question of what bandstructure produces the best thermoelectric device performance is revisited from a Landauer perspective. We find that a delta-function transport distribution function (TDF) results in operation at the Mahan-Sofo upper limit for the thermoelectric figure-of-merit, ZT. We show, however, the Mahan-Sofo upper limit itself depends on the bandwidth (BW) of the dispersion, and therefore, a finite BW dispersion produces a higher ZT when the lattice thermal conductivity is finite. Including a realistic model for scattering profoundly changes the results. Instead of a narrow band, we find that a broad BW is best. The prospects of increasing ZT …

Engineering Evaluation Of Multi-Beam Satellite Antenna Boresight Pointing Using Land/Water Crossings, Catherine Susan May

Electronic Theses and Dissertations

The Microwave Radiometer (MWR) on the Aquarius/SAC-D mission measures microwave radiation from earth and intervening atmosphere in terms of brightness temperature (Tb). It takes measurements in a push-broom fashion at K (23.8GHz) and Ka (36.5 GHz) band frequencies using two separate antenna systems, each producing eight antenna beams. Pre-launch knowledge of the alignment of these beams with respect to the space-craft is used to geolocate the antenna footprints on ground. As a part of MWR’s on-orbit engineering check-out, the verification of MWR’s pointing accuracy is discussed here. The technique used to assess MWR’s pointing involved comparing the radiometer image of …

A Multi-Agent Intelligent System For Detecting Unknown Adverse Drug Reactions Through Communication And Collaboration, Ayman Mohammad Mansour

Wayne State University Dissertations

Several thousands of drugs are currently available on the U.S. market. A complete understanding of the safe use of drugs is not possible at the time when drug is developed or marketed. At that time, the safety information is only obtained from a few thousand people in a typical pre-marketing clinical trial. Clinical trials are not capable of detecting rare adverse drug reactions (ADRs) because of limitations in sample size and trial duration. Early detection of unknown ADRs could save lives and prevent unnecessary hospitalizations. Current methods largely rely on spontaneous reports which suffer from serious underreporting, latency, and inconsistent …

3-Dimensional Intracortical Neural Interface For The Study Of Epilepsy, Jessin Koshy John

Wayne State University Dissertations

Epilepsy is a chronic disease characterized by recurrent, unprovoked seizures, where seizures are described as storms of uncontrollable neuro-electrical activity within the brain. Seizures are therefore identified by observation of electrical spiking observed through electrical contacts (electrodes) placed on the scalp or the cortex above the epileptic regions. Current epilepsy research is identifying several specific molecular markers that appear at specific layers of the epilepsy-affected cortex. However, technology is limited in allowing for live observation of electrical spiking across these layers. The underlying hypothesis of this project is that electrical interictal activity is generated in a layer- and lateral-specific pattern. …

A Sociable Humanoid Autonomous Robotic Platform (The Sharp Project): An Evaluation Of The G.E.N.E.S.I.S. Robot As An Interactive Consumer Robotic Platform, Jeffrey J. Rick

Dissertations and Theses @ UNI

The Social Humanoid Autonomous Robotic Platform (SHARP) project is an android project that was created with the intent of making learning about androids and robotics easier for the novice, diverse for the expert, educational in the classroom, and useful in the home or business. The project centers itself on its simplicity, low cost, and expandability. This paper illustrates how the SHARP Project has the potential to be an affordable fit in nearly every modern setting. The introduction of the SHARP project lays the groundwork for people of many ages, incomes, and educational levels to take advantage of robotics technology. The …

The Design And Evaluation Of Wireless Sensor Networks For Applications In Industrial Locations, Hameed Madwar

Dissertations and Theses @ UNI

In manufacturing industries, there exist many applications where Wireless Sensor Networks (WSN's) are integrated to provide wireless solution for the automated manufacturing processes. It is well known that industrial environments characterized by extreme conditions such as high temperature, pressure, and electromagnetic (EM) interference that can affect the performance of the WSN's. The key solution to overcome this performance issue is by monitoring the received Signal Strength Index (RSSI) at the received sensor of the WSN device and track frame error rate of wireless packets.

ZigBee is a wireless sensor network (WSN) standard designed for specific needs of the remote monitoring …

The Integration Of Wind Energy In The Electrical Grid During The Contingencies, Islam Ali

Dissertations and Theses @ UNI

As wind energy expansion develops, there are also many problems and challenges to connect the wind farms to the grid. There are many different interactions during the connection like the voltage flicker, harmonics, transient, short circuit current, frequency, and safety protection. Those problems may affect the performance of the grid and may cause serious problems. This study investigates the grid-connection problems for the wind turbines and offers appropriate solutions. This study provides a simulation for the power system during the faults. The electrical grid in the simulation contains generators and wind turbines which are connected to the grid. It also …

"Lead-Free Solders Are Currently Used In The Electronic Components Industry…", Timothy Mead

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Tunable Gold Nanostructures With Nanocapsules As Template Reaction Vessels, Balasubramanian Ramjee, Srujana Prayakarao, Sangbum Han, Wei Cao

Chemistry & Biochemistry Faculty Publications

Hollow, polymeric, thiol-ene resorcinarene nanocapsules can act as template reaction vessels for the synthesis of gold nanoshells or spherical aggregates of gold nanoparticles depending on the reaction conditions. The spherical nanoparticle aggregates were evaluated as catalysts in the biphasic reduction of 4-nitrophenol.

To License Or Not To License Updated: An Examination Of State Statutes Regarding Private Investigators And Digital Examiners, Thomas Lonardo, Doug White, Alan Rea

Journal of Digital Forensics, Security and Law

In this update to the 2009 year's study, the authors examine statutes that regulate, license, and enforce investigative functions in each US state. After identification and review of Private Investigator licensing requirements, the authors find that very few state statutes explicitly differentiate between Private Investigators and Digital Examiners, but do see a trend of more states making some distinction. The authors contacted all state regulatory agencies where statutory language was not explicit, and as a result, set forth the various state approaches to professional Digital Examiner licensing. As was the case in the previous two iterations of this research, the …

Characterizing Metal-Insulator-Transition (Mit) Phase Change Materials (Pcm) For Rf And Dc Micro-Switching Elements, Brent L. Danner, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Metal-insulator transition (MIT) phase-change materials (PCM) are material compounds that have the ability to be either conductors or insulators depending on external stimuli. A micromachined test structure for applying external electric fields across MIT wire segments was designed and fabricated. Using this novel test structure, Germanium Telluride (GeTe) and Vanadium Oxide (VOx) were successfully transitioned from a conductor to an insulator. The resistivity of the GeTe wire segments increased three to five orders of magnitude with ∼40 V applied to the parallel plates of the test structure. The VOx wires exhibited an order of magnitude transition in resistivity with ∼20 …

A Unified Nonlinear Adaptive Approach For The Fault Diagnosis Of Aircraft Engines, Remus C. Avram

Browse all Theses and Dissertations

In this thesis, a fault detection and isolation (FDI) method is developed for aircraft engines by utilizing nonlinear adaptive estimation techniques. Engine sensor faults, actuator faults and component faults are considered under one unified framework. The fault diagnosis architecture consists of a bank of nonlinear adaptive estimators. One of them is the fault detection estimator used for fault detection, and the remaining ones are fault isolation estimators employed to determine the particular fault type/location after fault detection. Each isolation estimator is designed based on the functional structure of a particular fault type under consideration. The FDI architecture has been integrated …

Mapping Algorithm For Autonomous Navigation Of Lawn Mower Using Sick Laser, Shashidhar Baichbal

Browse all Theses and Dissertations

The objective of this thesis is to present a mapping algorithm for autonomous navigation of a lawnmower based on the range and bearing information of a SICK laser. The Simultaneous Localization and Mapping (SLAM) algorithm is a tool that can be used to navigate unmanned vehicle in an unknown environment. The two-dimensional (2D) maps of the obstacles can be obtained if the laser scans the environment in a plane horizontal to the ground. However, the 2D map does not give information of the objects that are placed below the height of the laser. This makes it difficult for the lawn …