Electrical and Computer Engineering Commons^™

Temperature Profiling Of Reflow Oven Used At Sscg Site 2 Automotive Department Of Integrated Micro-Electronics Inc., Kristoffer Jun B. Haguingan

Undergraduate Theses

The Integrated Micro-Electronics Inc. is one of the leading electronic manufacturing service provides in the country. The key features of the company are its flexibility, discipline and devotion to provide customer satisfaction. They maintain a high level of quality in their products.In their surface mount assembly lines, the use of reflow soldering is very dominant. Almost all lies use reflow ovens. Due to this matter, their profiling procedure should be well-organized and systematic. The profiling is done to arrive at an oven profile that will yield optimum level of solder quality at the same time minimizing production cost. By studying …

Magnetic Cell Separation By Inkjet Printing For Disease Monitoring, Sylvia Lucia Natividad

Open Access Theses & Dissertations

The standard analysis technique for cell sorting, flow cytometry, requires centralized facilities such as tertiary Medical Centers. According to the U.S. Department of Health and Human Services Designated Health Professional Shortage Areas (HPSA) Statistics, in this country alone, more than 35 million people live in medically underserved areas, many of which need access to diagnostic procedures for proper management of their diseases. A cell sorting technique that can be done in low-resource settings at a decreased cost to the medical organization and the patient has been developed through this research project. By combining inkjet printing technology and magnetic labeling of …

Investigation Of The Divcon Neuron To Increase The Performance Of A Traditional Feed Forward Multi-Layer Perceptron And Its Hardware Implementation, Jovan Saenz

Open Access Theses & Dissertations

ABSTRACT

Artificial Neural Networks (ANNs) have been developed in an attempt to emulate the information processing capabilities of the biological brain. They offer an alternate computing approach to problems in which mathematical modeling is complicated, such as pattern recognition and pattern classification.

Since ANNs were proposed in the early 1940s, there has been a great amount of research effort dedicated to the development of new models that improve performance. Consequently, different architectures, a variety of activation functions, and distinct learning algorithms have been developed and implemented in different disciplines such as medicine, engineering, and science. In addition, ANNs have been …

Multi-Physics Modeling Of Induction-Based Additive Manufacturing Of Metals, Danny W. Muse

Open Access Theses & Dissertations

The shift towards 3D printing of functional products has provided a glimpse of the future in terms of manufacturing technologies and the creation of volumetrically complex structures made possible only through these technologies. 3D printing has emerged from the culmination of several technologies covering multiple industries and a myriad of materials. Unlike subtractive technologies such as mills, lathes and CNC machines, where material is removed from a bulk slab or billet to produce a desired part, 3D printing uses an additive layered approach to deposit material based on cross sections of the desired part. Both approaches produce parts based on …

Non-Gaussian Anisotropic Diffusion Processing For Medical Imagining Using The Osirix Dicom Viewer, Jonathan Blackledge, Matthew Blackledge, Jane Courtney

Articles

Medical imaging is a fertile area for computer graphics, image processing and real time visualization. In this paper we present a method for reducing noise in CT (Computed Tomography) and MR (Magnetic Resonance) images that (in addition to other noise sources) is characteristic of the numerical procedures required to construct the images, namely, the (inverse) Radon Transform. In both cases, MR imaging in particular, an additional noise source is due to the process of diffusion thereby predicating use of the Anisotropic Diffusion method for noise suppression. This method is based on a diffusion model for noise generation where the Diffusivity …

Energy Commodities Trading Using A Phase Signal Derived From The Levy Index Of Price And Volatility, Jonathan Blackledge, Derek Kearney, Claire Farrell, Grace Kearney

Articles

Energy traders need to decide what markets and commodities to trade in, when to open and close trades and how to maximize profits. In this paper we consider an approach for analyzing energy commodity price data based on the Lévy index in order to develop a new short-term predictive trend indicator for the price. This is achieved by computing the unwrapped phase signal generated from the Lévy index of both the Stochastic Volatility and price and is evaluated using data from the Irish Energy Market, namely, time series for the price of Electricity, Gas and Oil. The initial results show …

Structure And Polymorphism Of Biaxial Bent-Core Smectic Liquid Crystal, S. Sreenilayam, M. Nagaraj, Yuri Panarin, J. K. Vij, A. Lehmann, C. Tschierske

Articles

The mesomorphic properties of a homologous series of achiral bent-core compounds are studied by polarizing optical microscopy, electro-optics and polarization measurements. Induction of a new orthogonal smectic phases with the increase of alkyl side chain length was observed. One of the compounds exhibits a unique phase transition between four non-tilted smectic phases (SmAPA–SmAPAR-SmAPR-SmA). The uniaxial but antiferroelectric nature of SmAPAR phase was confirmed by POM, current response, the 2nd harmonic electro-optic response and polarization measurements. The structure of SmAPAR phase was studied theoretically by Next-Nearest-Neighbor model and was identified as SmAPα.

Raman And Infrared Study Of Electrospun Plla/Pcl Nanofiber Blends For Use In Tissue Engineering, Jose Luis Enriquez Carrejo

Open Access Theses & Dissertations

Recently, the biomedical engineering field has developed at a very fast pace as improved techniques and materials become available to promote its growth. Consequently, the research in polymeric biomaterials has been highly stimulated by this trend. The goal of the current research is to demonstrate the usefulness of the Raman scattering, Raman mapping, and infrared absorption spectroscopies to tissue engineering, by spectroscopically characterizing blends of PLLA and PCL polymers, which were prepared by electrospinning with and without cell addition. The proposed use of these blends is as primary biomaterials in biodegradable scaffolds used in tissue engineering. Both Raman and infrared …

Three-Dimensional Structural Electronic Integration For Small Satellite Fabrication, Cassie Gutierrez

Open Access Theses & Dissertations

The ability to realize truly three-dimensional electronic circuits is complicated if not impossible using traditional fabrication techniques. Such techniques are limited to the use of two dimensional printed circuit boards (PCBs), and require various dissonant processes which exhaust time, volume and cost. Due to the nature of Additive Manufacturing (AM) such problems are diminished and in some ways completely overcome. Additive Manufacturing allows for a higher range of design freedom along conformal surfaces, as well as unit level customization; it is the threshold for embedded electronics, allowing for three-dimensional circuitry in ways traditional fabrication is unfeasible. In such ways, additive …

Sparse Signal, Image Recovery In Compressive Sensing Technique Through L1 Norm Minimization, Phanendra Koppisetti

Open Access Theses & Dissertations

The classical Shannon Nyquist theorem tells us that, the number of samples required for a signal to reconstruct must be at least twice the bandwidth of the highest frequency for the signal of interest. In fact, this principle is used in all signal processing applications. Unfortunately, in most of the practical cases we end up with far too many samples. In such cases a new sampling method has been developed called Compressive Sensing (CS) or Compressive Sampling, where one can reconstruct certain signals and images from far fewer samples or measurements when compared to that of samples in classical theorem. …

Video Mosaicing Using Inertial Sensors, Arturo Maya Pereyra

Open Access Theses & Dissertations

A method to reduce the process complexity of Video Mosaicing could rely on information concerning the orientation of the camera instead of image feature tracking. Inertial sensors (e.g. accelerometers and gyros) could form part of a low cost motion based technology which can be used in this case and this thesis details an approach for Video Mosaicing based on such technology that requires non-computationally intensive algorithms.

Nanoprobe I-V Characterization Of Cdte/Cds Micro And Nano-Patterned Solar Cells, Heber Prieto

Open Access Theses & Dissertations

This thesis presents a novel way to characterize micro and nano patterned cadmium telluride thin film solar cells via a nano-probe system. A historical review of CdTe-based solar cells is presented first followed by review of the technology developed to produce the patterned CdTe cells. A detailed presentation is then provided on the use of a Zyvex nanoprobing system to characterize the patterned solar cells. The I-V response of micro- and nano-patterned solar cells stimulated under different e-beam conditions is presented and analyzed. Suggestions of how to improve the technique are provided. This work documents, for the first time, the …

Determination Of The Dynamic Behavior Of Subjects With Diabetic Neuropathy, Luis G. Sagarnaga Lopez

Open Access Theses & Dissertations

The diabetic foot is one of the most feared complications of diabetes [3]. Causes of a diabetic foot come from many disorders including diabetic neuropathy, peripheral vascular disease, charcot's neuropathy, foot ulceration, and limb amputation [4]. Statistics have revealed that 8.3 percent of population in the U.S. is affected by diabetes in 2010, i.e., 25.8 million people. About 60 percent to 70 percent of people with diabetes have mild to severe forms of nervous system damage [13]. There is an enormous impact on the physical and mental health of patients who suffer from diabetes.

This research was to determine the …

Control Of A Robotic Prototype Multi-Axis Synergistic System, Julio A. Torres

Open Access Theses & Dissertations

Balance is an ability that every person has and uses in normal daily life, to walk, run, stand, dance, etc. However, there are people who suffer a kind of balance impairment. The Computerized Dynamic Posturography (CDP) is technique in balance rehabilitation, where the patient is asked to stand on a moving platform that is equipped with sensors that measure how well you maintain your balance. In this thesis, a new CDP mechatronic system, the Multi-Axis Synergistic System (MASS), for balance assessment is being developed.

As a first stage and as the objective of this research work the transferable control algorithm …

Fusion Of Visual And Thermal Images Using Genetic Algorithms, Sertan Erkanli, Jiang Li, Ender Oguslu, Shangce Gao (Ed.)

Electrical & Computer Engineering Faculty Publications

No abstract provided.

The Far Field Transformation For The Antenna Modeling Based On Spherical Electric Field Measurements, P. Li, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

According to the uniqueness theorem, the far field radiation pattern of radiators such as antennas can be determined from the measured tangential electric or magnetic field components over an arbitrary Huygens' surface enclosing the radiator. In this paper, a method using the spherical electric field measurement is developed to calculate the far field radiation. Following the Schelkunoff's field equivalence principle, a spherical region surrounding the radiator is assumed and its internal space is filled up with the perfect electric conductor (PEC). The radiated field from the Huygens' equivalent electric current is zero. Referring to the Ohm-Rayleigh method and the scattering …

An Efficient Method For Computing Highly Oscillatory Physical Optics Integral, Y. M. Wu, Lijun Jiang, W. C. Chew

Electrical and Computer Engineering Faculty Research & Creative Works

In this work, we use the numerical steepest descent path (numerical SDP) method in complex analysis theory to calculate the highly oscillatory physical optics (PO) integral with quadratic phase and amplitude variations on the triangular patch. The Stokes' phenomenon will occur due to various asymptotic behaviors on different domains. The stationary phase point contributions are carefully studied by the numerical SDP method and complex analysis using contour deformation. Its result agrees very well with the leading terms of the traditional asymptotic expansion. Furthermore, the resonance points and vertex points contributions from the PO integral are also extracted. Compared with traditional …

Optimization In Energy And Power Management For Renewable-Diesel Microgrids Using Dynamic Programming Algorithm, Tu A. Nguyen, Mariesa L. Crow

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents an optimization analysis for energy and power management in microgrids with renewable energy resources and diesel generators. Dynamic Programming (DP) algorithm and the simplex method have been used to minimize the total daily cost of the system and also maximize the total efficiency of the energy storage system during charge and discharge. the algorithm is validated on a hybrid system for military forward operating base camps that contain a PV array, wind generator, hydrogen-Based fuel cell, batteries and diesel generators. © 2012 IEEE.

Hardware Emulation Of Wideband Correlated Multiple-Input Multiple-Output Fading Channels, Fei Ren, Yahong Rosa Zheng

Electrical and Computer Engineering Faculty Research & Creative Works

A low-complexity hardware emulator is proposed for wideband, correlated, multiple-input multiple-output (MIMO) fading channels. the proposed emulator generates multiple discrete-time channel impulse responses (CIR) at the symbol rate and incorporates three types of correlation functions of the subchannels via Kronecker product: The spatial correlation between transmit or receive elements, temporal correlation due to Doppler shifts, and inter-tap correlation due to multipaths. the Kronecker product is implemented by a novel mixed parallel-serial (mixed P-S) matrix multiplication method to reduce memory storage and to meet the real-time requirement in high data-rate, large MIMO size, or long CIR systems. We present two practical …

A Method To Improve Interest Point Detection And Its Gpu Implementation, Prabakar Karuppannan Gunashekhar

LSU Master's Theses

Interest point detection is an important low-level image processing technique with a wide range of applications. The point detectors have to be robust under affine, scale and photometric changes. There are many scale and affine invariant point detectors but they are not robust to high illumination changes. Many affine invariant interest point detectors and region descriptors, work on the points detected using scale invariant operators. Since the performance of those detectors depends on the performance of the scale invariant detectors, it is important that the scale invariant initial stage detectors should have good robustness. It is therefore important to design …

Effect Of Electrical Vehicles On Residential Distribution Systems, Paul Haley

LSU Master's Theses

This thesis focuses on the present state of electrical vehicles (EVs) in the market and the effects that these vehicles could have on residential distribution systems. The current EVs available on the market and the current level of market penetration were investigated. Advantages and disadvantages of EVs from a consumer and governmental perspective were identified. The efficiencies of the whole energy delivery process of electrical vehicles and gasoline vehicles were estimated. Efficiency estimation was used to estimate the impact of EVs on the consumption of fossil fuels and emission of greenhouse gases. Measurement of an EV battery charging cycle and …

Consensusability Of Discrete-Time Multi-Agent Systems, Abhishek Pandey

LSU Master's Theses

The study of multi-agent systems (MAS) focuses on systems in which many intelligent agents interact within an environment. The agents are considered to be autonomous entities. MAS can be used to solve problems that are difficult or impossible for an individual agent to solve. The main feature which is achieved when developing MAS, if they work, is flexibility, since MAS can be added to, modified and reconstructed, without the need for detailed rewriting of the application. MAS can manifest self-organization as well as self-steering related complex behaviors even when the individual strategies of all their agents are simple. The goal …

Reactive Power Considerations In Reliability Analysis Of Solar Photovoltaic Systems, Dattatray N. Gaikwad

LSU Master's Theses

Reliability is one of the key aspects of power system operation and therefore reliability analysis techniques are well developed. However reliability analysis conventionally takes into account active power and limited attention has been given to reactive power. Reactive power is very essential in maintaining voltage stability of power systems. The voltage constraint at network can restricts active power delivery to the loads and could result in forced load curtailment. This research investigates the effect of reactive power shortage on reliability of power systems with significant penetration of PV cells. The reactive power issues become more significant in distributed generation using …

Impact Of Plug-In Electrical Cars On Energy Demand, On Power System And On Environment, Sital Tiwari

LSU Master's Theses

The use of an electric vehicle (EV) over a gasoline vehicle (GV) is often portrayed as environment friendly or green movement ignoring how the electricity is produced. EVs get credit for preserving green environment and preventing global warming by minimizing the dependency on oil. Most of the time, these assumptions that favor EV are not well justified. Therefore, proper studies on the impact of electric vehicles on energy demand, on environment and on power system are necessary before reaching to any conclusion. This thesis explores the possibility of energy consumption pattern shift within the different sectors of energy use due …

Electric Elevator Drive With Position Control, Peter James Ford

LSU Master's Theses

This thesis is a study on the implementation of an elevator’s position-controlled electric drive. The information contained within this paper serves as a framework to expand the usefulness of electric drives through the addition of digital control systems and switching power supplies. The tangible example of an elevator driven by a permanent-magnet DC motor is used for this paper so that students may relate to the work and apply it to their future projects. The tasks to be accomplished in order to achieve an electric elevator drive with position control are: determining the parameters of the permanent-magnet DC motor, designing …

An Electronic Architecture For Mediating Digital Information In A Hallway Fac̦Ade, Narendra Nallapeta Aswathanarayana Setty

LSU Master's Theses

Ubiquitous computing requires integration of physical space with digital information. This presents the challenges of integrating electronics, physical space, software and the interaction tools which can effectively communicate with the audience. Many research groups have embraced different techniques depending on location, context, space, and availability of necessary skills to make the world around us as an interface to the digital world. Encouraged by early successes and fostered by project undertaken by tangible visualization group. We introduce an architecture of Blades and Tiles for the development and realization of interactive wall surfaces. It provides an inexpensive, open-ended platform for constructing large-scale …

Design Of Reverse Converters For The Multi-Moduli Residue Number Systems With Moduli Of Forms 2a, 2b - 1, 2c + 1, Naveen Kumar Samala

LSU Master's Theses

Residue number system (RNS) is a non-weighted integer number representation system that is capable of supporting parallel, carry-free and high speed arithmetic. This system is error-resilient and facilitates error detection, error correction and fault tolerance in digital systems. It finds applications in Digital Signal Processing (DSP) intensive computations like digital filtering, convolution, correlation, Discrete Fourier Transform, Fast Fourier Transform, etc. The basis for an RNS system is a moduli set consisting of relatively prime integers. Proper selection of this moduli set plays a significant role in RNS design because the speed of internal RNS arithmetic circuits as well as the …

Linear Pm Generator For Wave Energy Conversion, Rajkumar Parthasarathy

LSU Master's Theses

The main objective of this thesis is to design a selected version of linear PM generator and to determine the electromechanical characteristics at variable operating conditions. To reach this objective, the linear generator with quasi-flat linear machine structure was selected and designed using the magnetic circuit theory. By applying 2-D and 3-D FEM the magnetic circuit was optimized and parameters of equivalent circuit were determined. The performance of generator operation are analyzed in steady-state and in dynamic conditions using MATLAB/SIMULINK. The analysis has been carried out at the secondary variable speed, which is changing sinusoidally according to the motion of …

Non-Rigid Registration Of 2-D/3-D Dynamic Data With Feature Alignment, Huanhuan Xu

LSU Master's Theses

In this work, we are computing the matching between 2D manifolds and 3D manifolds with temporal constraints, that is we are computing the matching among a time sequence of 2D/3D manifolds. It is solved by mapping all the manifolds to a common domain, then build their matching by composing the forward mapping and the inverse mapping. At first, we solve the matching problem between 2D manifolds with temporal constraints by using mesh-based registration method. We propose a surface parameterization method to compute the mapping between the 2D manifold and the common 2D planar domain. We can compute the matching among …

Micro Grid Stability Improvements By Employing Storage, Sumiti Lamichhane

LSU Master's Theses

Storage devices can be used in a power gird to store the excess energy when the energy production is high and the demand is low and utilize the stored energy when the produced energy cannot meet the high demands of the consumers. This thesis represents a micro grid consisting of a conventional synchronous generator, as well as renewable energy sources, energy storage, and loads in order to investigate the effective energy flow control and transient stability improvement by employing thermal storage. Thermal storage, unlike electrical one (such as battery) is more environmental friendly, has longer life span, and is more …