Engineering Commons^™

Evaluation Of Lead (Pb(Ii)) Removal Potential Of Biochar In A Fixed-Bed Continuous Flow Adsorption System, Pushpita Kumkum, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

Background. Lead (Pb(II)) exposure from drinking water consumption is a serious concern due to its negative health effect on human physiology. A commercially available filter uses the adsorption potential of activated carbon for removing heavy metals like Pb(II). However, it has some constraints since it uses only surface area for the adsorption of these contaminants. Biochar produced via slow pyrolysis of biomass shows the presence of oxygen-containing functional groups on its surface that take part in the adsorption process, with higher removal potential compared to activated carbon.

Objectives. The current study examined the adsorption kinetics and mechanisms of Pb(II) removing …

Tire-Chip Reinforced Foundation As Liquefaction Countermeasure For Residential Buildings, Hemanta Hazarika, Siavash Manafi Khajeh Pasha, Isao Ishibashi, Norimasa Yoshimoto, Tota Kinoshita, Shigeki Endo, Ashoke Kumar Karmokar, Takuto Hitosugi

Civil & Environmental Engineering Faculty Publications

To prevent vibration-induced and liquefaction-induced damage to residential buildings during earthquakes, a low-cost technique has been developed and described here. It utilizes a mixture of tire chips and gravel as the horizontal reinforcing inclusion under the foundation of residential houses. The horizontal reinforcing inclusion refers to a layer of tire chips and gravel which is placed horizontally beneath the foundation. This mixture of tire chips and gravel provides sufficient bearing capacity to the foundation. In this research, a series of small-scale 1 g model shaking table tests was performed to evaluate the effectiveness of the technique. In addition, cyclic undrained …

Influence Of Bracing On Buckling Strength Of Pultruded Glass Fiber Reinforced Polymer Frames, Mojtaba B. Sirjani, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

A numerical study of the influence of structural bracing on the buckling strength of pultruded Glass Fiber Reinforced Polymer (GFRP) frames is presented. Although the influence of bracing on frames made from other materials such as steel have been studied in the past, this paper investigates the performance of pultruded GFRP portal frames with pinned or fixed column bases. Each frame is constructed with pultruded GFRP I-section members. The influence of I-section column major and minor axis orientation is also investigated. The results demonstrate the practical significance of bracing pultruded GFRP frames. The results show that the buckling loads for …

Nonhydrostatic Modeling Of Flow Interactions With Highly Flexible Vegetation, Navid Tahvildari, Ramin Familkhalili, Gangfeng Ma

Civil & Environmental Engineering Faculty Publications

Improving our understanding of the interactions between gravity waves, currents, and coastal vegetation, which are nonlinear in nature, enables coastal engineers and managers to better estimate hydrodynamic forces on coastal infrastructure and utilize natural elements to mitigate their impacts. Aquatic vegetation is ubiquitous in coastal waters and it is well-known that flow loses energy over vegetation. Computational modeling of wave-vegetation interaction has been the subject of numerous recent studies and many improvements have been achieved in reducing limitations applied on wave and vegetation behavior in these models. Mechanisms for highly flexible vegetation have been incorporated in a Boussinesq-type model and …

Multi-Modal Natural Frequency Response Of Utility Transmission Tapered Wood Poles Under Various Soil Foundation Conditions: Natural Frequency Response Under Various Soil Conditions, Ramani Ayakannu, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

Studied herein is the multi-modal natural frequency response of utility transmission tapered wood poles under various soil foundation conditions. Strong winds and hurricanes in various parts of the world have resulted in collapse of such utility poles and have resulted in the disruption of electrical distribution systems in addition to creating hazardous conditions for the public. To avoid the development of resonance under such dynamic loading, the multi-modal natural vibration of the utility poles first needs to be understood in the presence of practical soil foundation conditions. To capture the soil-structure interaction effects on the multi-modal frequencies, a SAP2000 dynamic …

Cybersecurity Education Through Technological And Engineering Literacy Standards, Philip A. Reed, Steven A. Barbato

STEMPS Faculty Publications

No abstract provided.

A Tutorial And Future Research For Building A Blockchain-Based Secure Communication Scheme For Internet Of Intelligent Things, Mohammad Wazid, Ashok Kumar Das, Sachin Shetty, Minho Jo

Computational Modeling & Simulation Engineering Faculty Publications

The Internet of Intelligent Things (IoIT) communication environment can be utilized in various types of applications (for example, intelligent battlefields, smart healthcare systems, the industrial internet, home automation, and many more). Communications that happen in such environments can have different types of security and privacy issues, which can be resolved through the utilization of blockchain. In this paper, we propose a tutorial that aims in desiging a generalized blockchain-based secure authentication key management scheme for the IoIT environment. Moreover, some issues with using blockchain for a communication environment are discussed as future research directions. The details of different types of …

Recent Developments In The Pyscf Program Package, Qiming Sun, Xing Zhang, Samragni Banerjee, Peng Bao, Marc Barbry, Nick S. Blunt, Nikolay A. Bogdanov, George H. Booth, Jia Chen, Zhi-Hao Cui, Janus J. Eriksen, Yang Gao, Sheng Gun, Jan Hermann, Matthew R. Hermes, Kevin Koh, Peter Koval, Susi Lehtola, Zhendong Li, Junzi Liu, Narbe Mardirossian, James D. Mcclain, Mario Motta, Bastien Mussard, Hung Q. Pham, Artem Pulkin, Wirawan Purwanto, Paul J. Robinson, Enrico Ronca, Elvira R. Sayfutyarova, Maximillian Scheurer, Henry F. Schurkus, James E.T. Smith, Chong Sun, Shi-Ning Sun, Shiv Upadhyay, Lucas K. Wagner, Xiao Wang, Alec White, James Daniel Whitfield, Mark J. Williamson, Sebastian Wouters, Jun Yang, Jason M. Yu, Tianyu Zhu, Timothy C. Berkelbach, Sandeep Sharma, Alexander Yu Sokolov, Garnet Kin-Lic Chan

University Administration Publications

PySCF is a Python-based general-purpose electronic structure platform that supports first-principles simulations of molecules and solids as well as accelerates the development of new methodology and complex computational workflows. This paper explains the design and philosophy behind PySCF that enables it to meet these twin objectives. With several case studies, we show how users can easily implement their own methods using PySCF as a development environment. We then summarize the capabilities of PySCF for molecular and solid-state simulations. Finally, we describe the growing ecosystem of projects that use PySCF across the domains of quantum chemistry, materials science, machine learning, and …

Detailed Energy Efficiency Strategies For Converting An Existing Office Building To Nzeb: A Case Study In The Pacific Northwest, Ali Alajmi, Abby Short, Janna Ferguson, Kalina K. Vander Poel, Corey T. Griffin

Mechanical and Materials Engineering Faculty Publications and Presentations

This paper is an attempt to identify a methodology for converting conventional energy consumption buildings to net-zero energy buildings (NZEB). The first step was rather different from the usual energy audit, which is to analyze a facility’s energy consumptions from both macro- and micro-scales. To implement such an approach, a governmental office building (Metro) in Portland, OR, was chosen as a case study. After a building model was validated against a real measurement, it was then used to evaluate different energy efficiency strategies (EESs) so as to reduce the energy consumption. The EESs showed a reduction in energy use intensity …

Utility-Scale Solar Pv Performance Enhancements Through System-Level Modifications, Andrew D. S. Glick, Naseem Ali, Juliaan Bossuyt, Marc Calaf, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

Performance of solar PV diminishes with the increase in temperature of the solar modules. Therefore, to further facilitate the reduction in cost of photovoltaic energy, new approaches to limit module temperature increase in natural ambient conditions should be explored. Thus far only approaches based at the individual panel level have been investigated, while the more complex, systems approach remains unexplored. Here, we perform the first wind tunnel scaled solar farm experiments to investigate the potential for temperature reduction through system-level flow enhancement. The percentage of solar irradiance converted into electric power depends upon module efficiency, typically less than 20%. The …

The Picture Fuzzy Distance Measure In Controlling Network Power Consumption, Florentin Smarandache, Ngan Thi Roan, Salvador Coll Arnau, Marina Alonso Diaz, Juan Miguel Martinez Rubio, Pedro Lopez, Fran Andujar, Son Hoang Lee, Manh Van Vu

Branch Mathematics and Statistics Faculty and Staff Publications

In order to solve the complex decision making problems, there are many approaches and systems based on fuzzy theory were proposed.

(Φ, Ψ)-Weak Contractions In Neutrosophic Cone Metric Spaces Via Fixed Point Theorems, Florentin Smarandache, Wadei F. Al-Omeri

Branch Mathematics and Statistics Faculty and Staff Publications

In this manuscript, we obtain common fixed point theorems in the neutrosophic cone metric space. Also, notion of (Φ, Ψ)-weak contraction is defined in the neutrosophic cone metric space by using the idea of altering distance function. Finally, we review many examples of cone metric spaces to verify some properties.

An Initial Look Into The Computer Science And Cybersecurity Pathways Project For Career And Technical Education Curricula, Vukica M. Jovanovic, Murat Kuzlu, Otilia Popescu, Abdul Rahman Badawi, Deborah Kay Marshall, Salih Sarp, Spyridoula Tsouganatou, Petros J. Katsioloudis, Linda Vahala, Hongyi Wu

Engineering Technology Faculty Publications

Computer science and cybersecurity have gained the attention of various stakeholders, industry representatives, educators, parents and students who are thinking about their future careers. Teaching computer science courses has moved into K-12 education, no longer introduced in the college classroom. There are various reasons for this trend. One is that in this way more children have access to the curriculum that integrates computer science principles, not just those undergraduate students in specific STEM majors. Other industries need different levels of computer science and cybersecurity education. There are various programs across the nation that are focusing on introducing these topics as …

Degrader Analysis For Diagnostic And Predictive Capabilities: A Demonstration Of Progress In Dod Cbm+ Initiatives, William Baker, Steven Nixon, Jeffrey Banks, Karl Reichard, Kaitlynn Castelle

Engineering Management & Systems Engineering Faculty Publications

This paper presents a modified reliability centered maintenance (RCM) methodology developed by The Applied Research Laboratory at The Pennsylvania State University (ARL Penn State) to meet challenges in decreasing life cycle sustainment costs for critical Naval assets. The focus of this paper is on the requirements for the development of the on-board Prognostics and Health Management (PHM) system with a discussion on the implementation progress for two systems: the high pressure air compressor (HPAC), and the advanced carbon dioxide removal unit (ACRU). Recent Department of Defense (DoD) guidance calls for implementing Condition Based Maintenance (CBM) as an alternative to traditional …

Design For Sustainment: Governance Engineering In Major Acquisition Programs, William Baker, Kaitlynn M. Castelle, Joseph M. Bradley, Lucas C. Marino

Engineering Management & Systems Engineering Faculty Publications

During acquisition for a sustainment-dominated, major capital asset, decision-making and action to develop the sustainment system must begin early in the acquisition process to sufficiently align the necessary integrated logistics support demanded by these systems. Effective governance improves the likelihood of success for delivery of the asset and accompanying sustainment system to ensure the asset meets expected performance and remains functional over its planned decades-long service life. The service life of a Navy vessel can range from 25 to 50 years. In this case study, we examine the operation of the governance system for major maritime acquisitions, wherein a fleet …

Partnering Undergraduate Engineering Students With Preservice Teachers To Design And Teach An Elementary Engineering Lesson Through Ed+Gineering, Kristie Gutierrez, Stacie I. Ringleb, Jennifer Jill Kidd, Orlando M. Ayala, Pilar Pazos, Krishnanand Kaipa

Teaching & Learning Faculty Publications

Major challenges in engineering education include retention of undergraduate engineering students (UESs) and continued engagement after the first year when concepts increase in difficulty. Additionally, employers, as well as ABET, look for students to demonstrate non-technical skills, including the ability to work successfully in groups, the ability to communicate both within and outside their discipline, and the ability to find information that will help them solve problems and contribute to lifelong learning. Teacher education is also facing challenges given the recent incorporation of engineering practices and core ideas into the Next Generation Science Standards (NGSS) and state level standards of …

Development Of A Method For Quantification Of Toluene Diisocyanate And Methylenediphenyl Diisocyanate Migration From Polyurethane Foam Sample Surface To Artificial Sweat By Hplc-Uv-Ms, Aleksandra Donchenko, Simon Aubin, Sébastien Gagné, Mark Spence, Livain Breau, Jacques Lesage

Études primaires

The US Environmental protection agency (EPA) has published guidance that includes test procedures for evaluating indoor exposure to chemicals from products. One of the test procedures represents the migration test for evaluating potential dermal exposure from home furniture. Such an evaluation involves the chemical measurement of the sweat which is currently unavailable in the literature. The objective of this project was to develop and validate an analytical method for quantification of migration of 4,4′-methylenediphenyl diisocyanate (MDI), 2,6-toluene diisocyanate (2,6-TDI) and 2,4-toluene diisocyanate (2,4-TDI) from a polyurethane (PU) flexible foam to artificial sweat that meets the recommendations of the EPA test …

Jc Drain And Sewer Website, Jarod Pichler, Nathan Houman

Capstone Showcase

1. A website for a small plumbing business in Scranton, Pennsylvania. The website includes a Home, About Us, Services, Contact Us, and Testimonials page. The home page introduces the company to the website viewer. The About Us page provides information about the company and owner, to the website viewer. The Services page provides the website viewer with all of the services that the company can provide. The Contact Us page allows the website viewer to send the company an email. Finally, the Testimonials page will allow the website viewer to leave a comment about the company’s services. The website also includes …

   ---

   Go to article

Impact Of Direction Parameter In Performance Of Modified Aodv In Vanet, Afsana Ahamed, Hamid Vakilzadian

Department of Electrical and Computer Engineering: Faculty Publications

A vehicular ad hoc network (VANET) is a technology in which moving cars are used as routers (nodes) to establish a reliable mobile communication network among the vehicles. Some of the drawbacks of the routing protocol, Ad hoc On-Demand Distance Vector (AODV), associated with VANETs are the end-to-end delay and packet loss. We modified the AODV routing protocols to reduce the number of route request (RREQ) and route reply (RREP) messages by adding direction parameters and two-step filtering. The two-step filtering process reduces the number of RREQ and RREP packets, reduces the packet overhead, and helps to select the stable …

Ultrafast Optical Response And Ablation Mechanisms Of Molybdenum Disulfide Under Intense Femtosecond Laser Irradiation, Changji Pan, Lan Jiang, Jingya Sun, Qingsong Wang, Feifei Wang, Ka Wang, Yongfeng Lu, Yeliang Wang, Liangti Qu, Tianhong Cui

Department of Electrical and Computer Engineering: Faculty Publications

Numerous valuable studies on electron dynamics have focussed on the extraordinary properties of molybdenum disulfide (MoS2); however, most of them were confined to the level below the damage threshold. Here the electron dynamics of MoS2 under intense ultrafast laser irradiation was investigated by experiments and simulations. Two kinds of ablation mechanisms were revealed, which led to two distinct types of electron dynamics and final ablation morphology. At a higher fluence, the emergence of superheated liquid induced a dramatic change in the transient reflectivity and micro-honeycomb structures. At a lower fluence, the material was just removed by sublimation, and the ablation …

A Review Of Problem Structuring Methods For Consideration In Prognostics And Smart Manufacturing, Patrick T. Hester, Andrew J. Collins, Barry Ezell, John Horst

Engineering Management & Systems Engineering Faculty Publications

Successful use of prognostics involves the prediction of future system behaviors in an effort to maintain system availability and reduce the cost of maintenance and repairs. Recent work by the National Institute of Standards and Technology indicates that the field of prognostics and health management is vital for remaining competitive in today’s manufacturing environment. While prognostics-based maintenance involves many traditional operations research-centric challenges for successful deployment such as limited availability of information and concerns regarding computational efficiency, the authors argue in this paper that the field of prognostics and health management, still in its embryonic development stage, could benefit greatly …

Using Ftir-Atr To Predict Saccharification From Enzymatic Hydrolysis Of Physically Pretreated Lignocellulosic Biomass, Rajasri Alaparthi

Master’s Theses

Producing biofuels from lignocellulosic biomass (i.e., non-edible plants) can reduce greenhouse gas emissions. The main challenge in converting lignocellulose to fuel, however, lies in the bioconversion process of biomass to sugars. To overcome the recalcitrance of the plant cell walls, pretreatment (e.g., ball milling) can be coupled with enzymatic hydrolysis to produce sugar monomers (e.g., glucose and xylose). The research question in this thesis study was “Can Fourier Transform Infrared Spectroscopy Attenuated Total Reflectance (FTIR-ATR) applied to untreated and physically pretreated lignocellulosic biomasses coupled with chemometric analysis predict sugar yields from enzymatic hydrolysis?” PLS models were constructed by correlating the …

Effect Of O2 Concentration In Ambient Mixture And Multiphase Radiation On Pollutant Formation In Ecn Spray-A, Khaled Mosharraf Mosharraf Mukut, Somesh Roy

Mechanical Engineering Faculty Research and Publications

The present study investigates the formation and evolution of soot and NO_X in a high-pressure constant-volume combustion chamber. This work focuses on the effect of multiphase thermal radiation and O₂ dilution in ambient/exhaust gases, some- times also referred to as exhaust gas recirculation(EGR), qualitatively and quantitatively. The spray-A case (n-dodecane as fuel) from Engine Combustion Network (ECN) is used as the target condition. Two different soot modeling approaches have been considered: a semi-empirical two-equation model and a detailed method of moments with interpolative closure (MOMIC) model. A multiphase photon Monte Carlo (PMC) solver with line-by-line (LBL) spectral data …

Developing A Uas-Deployable Methane Sensor Using Low-Cost Modular Open-Source Components, Gavin Demali

Williams Honors College, Honors Research Projects

This project aimed to develop a methane sensor for deployment on an unmanned aerial system (UAS), or drone, platform. This design is centered around low cost, commercially available modular hardware components and open source software libraries. Once successfully developed, this system was deployed at the Bath Nature Preserve in Bath Township, Summit County Ohio in order to detect any potential on site fugitive methane emissions in the vicinity of the oil and gas infrastructure present. The deliverables of this project (i.e. the data collected at BNP) will be given to the land managers there to better inform future management and …

Rpas: An Enhanced Finite Element Code For The Mechanistic Analysis Of Rigid Pavements, Nancy Aguirre

Open Access Theses & Dissertations

Significant amount of research has been conducted to improve the design of rigid pavements through the development of mechanistic analysis tools capable of accurately modeling the performance of such pavements. The use of the finite element (FE) method as a comprehensive tool for modeling the responses of rigid pavements has been limited in the past because of the complexity of calculations in modeling nonlinear behaviors, which are difficult to describe mathematically and computationally. Researchers from The University of Texas at El Paso developed NYSLAB, an FE modeling tool, for the analysis of rigid pavements subjected to traffic and environmental loading …

Evaluating Flow Features For Network Application Classification, Carlos Alcantara

Open Access Theses & Dissertations

Communication networks provide the foundational services on which our modern economy depends. These services include data storage and transfer, video and voice telephony, gaming, multimedia streaming, remote invocation, and the world wide web. Communication networks are large-scale distributed systems composed of heterogeneous equipment. As a result of scale and heterogeneity, communication networks are cumbersome to manage (e.g., configure, assess performance, detect faults) by human operators. With the emergence of easily accessible network data and machine learning algorithms, there is a great opportunity to move network management towards increasing automation. Network management automation will allow for a reduced likelihood of human …

A Survey Of The Current State Of The Practice In Bridging The Gap Between Engineering Ontologies And Modeling Profiles For Engineering Applications, John Artus

Open Access Theses & Dissertations

Model-Based Systems Engineering holds the promise of enhancing systems engineering tasks and product quality through better, more efficient exchange of data across tools, personnel, and departments, a higher quality of analysis resulting from greater access to cross-discipline data, better coordination between engineering activities and those of program management, and many other benefits. Yet, there is still no standardized method for achieving commonality of architecture vocabulary across projects, across, companies, across industries such that entities operating in the same domain produce products that speak the same technical language. Some specialized domains, such as the Department of Defense (DoD), have developed Architecture …

Assessment Of Hydraulic And Structural Behavior Of Inundated Pavements, Mojtaba Asadi

Open Access Theses & Dissertations

Severe flooding events have increasingly inundated the transportation infrastructure, including road networks, across the world and the Unites States. Such extreme events induce significant ingress of water into the pavement layers, which in turn leads to structural defects due to the reduction of the shear strength and resilient moduli of the soil layers, asphalt stripping in flexible pavements, pumping effect in rigid pavements, migration of fines into drainable layers, and swelling of expansive soils. Consequently, premature pavement failure may take place that can impose unforeseen maintenance/rehabilitation costs to highway agencies. Although some experimental research studies have been conducted to assess …

Structure-Property-Performance Evaluation Of Refractory Metal Incorporated Gallium Oxide Thin Films For Extreme Environment Applications, Anil Krishna Battu

Open Access Theses & Dissertations

An approach is presented to design refractory-metal (RM) incorporated Ga2O3-based materials with controlled structural, mechanical, and optical properties. A model system based on molybdenum (Mo) doped Ga2O3 (GMO) has been considered to elucidate the combined effect of RM-doping and processing parameters on the properties and oxygen sensor performance of GWO nanomaterials. The molybdenum (Mo) content in Ga2O3 was varied from 0 to 11 at% in the sputter-deposited Ga-Mo-O films. Molybdenum was found to significantly affect the structure and optical properties. While low Mo content (≤4 at%) results in the formation of single-phase (β-Ga2O3), higher Mo content results in amorphization. Chemically …

Low Weight Design Of A Pressure-Fed System For A Small Payload Launch Vehicle, Lucero Buendia

Open Access Theses & Dissertations

Carbon fiber reinforced polymer (CFRP) composites have become of great interests to aerospace industries because of their low-cost, lightweight and their tailorable mechanical properties. In aerospace structures, for example, heavy metals have been used in cryogenic fuel and oxidizer tanks for over 50 years. However, weight savings can be substantial if materials such as composites are used instead. From Delta IV heavy-lift launch vehicle it is known that cryogenic composite tanks can save approximately up to 30% of weight in fuel and oxidizer tanks. Although there is a wealth of studies in the mechanical behavior of composites at room temperature, …