Engineering Commons^™

Impact Of Turbulence Models And Shape Parameterization On Robust Aerodynamic Shape Optimization, Aslihan Vuruskan

Doctoral Dissertations

"Aerodynamic design optimization is typically performed at fixed flight conditions, without considering the variation and uncertainty in operating conditions. The objective of robust aerodynamic optimization is to design an aerodynamic configuration, which will keep its optimum performance under varying conditions such as the speed of aircraft. The primary goal of this study was to investigate the impact of turbulence models used in RANS simulations on the 2-D airfoil and 3-D wing designs obtained with gradient-based deterministic and robust optimization in transonic, viscous, turbulent flows. The main contribution of this research to the aerodynamic design area was to quantify the impact …

Experimental Investigation Of Ionic Liquid Mixtures For Electrospray Propulsion, Mitchell J. Wainwright

Doctoral Dissertations

"In recent years, there has been a dramatic increase in the number of small satellites (namely MicroSats, NanoSats, and CubeSats) in earth orbit; many of these are launched without propulsion systems. Multi-mode propulsion systems, capable of operating in either chemical or electric mode, have been proposed as attractive candidates for use in small satellites. Such systems are mass and volume optimal and flexible in terms of thrust requirements. Most previous work on multi-mode systems has focused on chemical mode performance.The work in this dissertation focuses on the electric mode performance of these propulsion systems.

The work in this research is …

Frequency Selective Surface-Based Sensing: Theory And Applications, Mahboobeh Mahmoodi

Doctoral Dissertations

"Frequency selective surfaces (FSS) are periodic arrays of resonant elements with a specific (resonant) reflection/transmission response when illuminated by electromagnetic energy. FSSs have been utilized for different applications such as spatial filters, reflectors, lenses, radomes, and more recently, as sensors. FSS-based sensors have shown potential for numerous applications in structural health monitoring such as crack detection, concurrent strain and temperature sensing, normal and shear strain sensing, inspection of layered structures, etc. As FSS-based sensing is largely undeveloped, there are many critical aspects that must be fully understood before this sensing approach can be fully utilized. Therefore, the goal of this …

An Integrated Wellbore Stability Study To Mitigate Expensive Wellbore Instability Problems While Drilling Into Zubair Shale/Sand Sequence, Southern Iraq, Ahmed Khudhair Abbas

Doctoral Dissertations

”The Zubair Formation is the most prolific reservoir in Iraq, which is comprised of sandstones interbedded with shale sequences. Due to the weak nature of the shale sequence, the instability of a wellbore is one of the most critical challenges that continuously appears during drilling across this formation. Historically, over 90% of wellbore problems in the Zubair Formation were due to wellbore instability. Problems associated with wellbore instability, such as tight hole, shale caving, stuck logging tools along with subsequent fishing, stuck pipe, and sidetracking result in increasing the non-productive time. This non-productive time has cost an enormous amount of …

Studies On The Stability Of Plasma Proteins And Their Fragments, Paul Praveen Nakka

Doctoral Dissertations

“The stability of a protein-based biological drug is an important concern during processing, storage or patient administration. There are various forces which contribute to the stabilizing of proteins. Both hydrogen bonds and hydrophobic interactions play an important role in protein stability. Improper folding or misfolding of proteins leads to aggregation, which is a major problem found in the bioprocessing industry. The objectives of this research are: 1) to determine the effect of environmental factors such as pH, temperature, additives or salts, and cosolvents on the stability human serum albumin (HAS), which is the most abundant protein in plasma, 2) to …

Multi-Physics-Based Approach To Active Microwave Thermography, Seyed Ali Mirala

Doctoral Dissertations

“The goal of this work is to advance a novel nondestructive testing (NDT) method for controlled, rapid, and effective inspection of a structure through the integration of microwave NDT and thermography, referred to as Active Microwave Thermography (AMT). In AMT, the structure under test is exposed to microwave radiation and the thermal profile of the structure is monitored via a thermal camera in order to obtain desired information regarding the structure. This new technique is applicable across a wide range of NDT needs including detection of voids, delamination, water ingress, debonding, and cracks in numerous structures such as carbon fiber …

Predicting Complex System Behavior Using Hybrid Modeling And Computational Intelligence, Vinayaka Gude

Doctoral Dissertations

“Modeling and prediction of complex systems is a challenging problem due to the sub-system interactions and dependencies. This research examines combining various computational intelligence algorithms and modeling techniques to provide insights into these complex processes and allow for better decision making. This hybrid methodology provided additional capabilities to analyze and predict the overall system behavior where a single model cannot be used to understand the complex problem. The systems analyzed here are flooding events and fetal health care. The impact of floods on road infrastructure is investigated using graph theory, agent-based traffic simulation, and Long Short-Term Memory deep learning to …

Human Behavior Understanding For Worker-Centered Intelligent Manufacturing, Wenjin Tao

Doctoral Dissertations

“In a worker-centered intelligent manufacturing system, sensing and understanding of the worker’s behavior are the primary tasks, which are essential for automatic performance evaluation & optimization, intelligent training & assistance, and human-robot collaboration. In this study, a worker-centered training & assistant system is proposed for intelligent manufacturing, which is featured with self-awareness and active-guidance. To understand the hand behavior, a method is proposed for complex hand gesture recognition using Convolutional Neural Networks (CNN) with multiview augmentation and inference fusion, from depth images captured by Microsoft Kinect. To sense and understand the worker in a more comprehensive way, a multi-modal approach …

Bond Behavior Of Advanced Fiber Reinforced Composite-Concrete Joints, Xingxing Zou

Doctoral Dissertations

“Externally bonding advanced composite materials to concrete structures is an effective way to improve their strength, ductility, and durability. The interfacial bond behavior is fundamental to understand the overall structural performance of concrete structures strengthened with advanced composite materials. This study includes a comprehensive investigation of the bond behavior of composite-concrete joints with different fiber reinforced composite types. First, a direct approach to determine the bond-slip relationship for fiber reinforced cementitious matrix (FRCM)-concrete joints based on fiber strain measurements was proposed. Then, an analytical solution to predict the full-range response of FRCM-concrete joints was derived by assuming a trilinear bond-slip …

The Development Of A Project Typology And Selection Tool To Improve Decision-Making In Sustainable Projects, Rakan Alyamani

Doctoral Dissertations

"Decision-making in sustainable projects is a complex and challenging process, especially during the initiating and planning phases of project development, due to influence from several external factors, as well as the uncertain environments surrounding their creation. It is essential to improve the decision-making process in sustainable projects during these two phases by relying on strong decision-making tools. The first contribution in this work identifies gaps in the literature of how institutionalization can impact sustainable projects through the effects of institutional isomorphisms from institutional theory. This helps decision makers better understand the relationship between institutionalization and sustainable projects. The second contribution …

Process Intensification Of Fuel Synthesis And Electrolysis, Jeremy Lee Hartvigsen

Doctoral Dissertations

”As more renewable energy is added to the electric grid, energy storage becomes a high priority. Suggestions have been made for energy storage in the form of fuel and chemicals. Currently, Solid Oxide Electrolysis systems can operate in endothermic mode and reduce the electrical requirement by supplying heat. Fuel synthesis from syngas is exothermic and can supply heat. However, the temperature mismatch in the normal operation of the electrolysis step and fuel synthesis step makes the direct utilization of this heat impossible. This work explores possibilities of alternate arrangements of coupling electrochemical systems and chemical synthesis. This work also explores …

Development Of Lightweight Materials By Meso- And Microstructure Control, Myranda Shea Spratt

Doctoral Dissertations

”In this work, two lightweight structures – lattice structures and metal matrix syntactic foams (MMSF) – were studied. Honeycomb lattices were manufactured by powder bed selective laser melting (SLM) from 304L stainless steel. The wall thicknesses of these structures ranged from 0.2 to 0.5 mm. Surface roughness was the primary cause of dimensional mismatch between the expected and as-built structures with an average wall thickness increase of 0.12 mm. The strength of the honeycombs increased with increasing wall thickness. A feature of the SLM microstructure, the melt pool boundary, was also studied as a part of this work. 3D models …

Experimental Study On A Novel Eor Method -- Polymeric Nanogel Combined With Surfactant And Low Salinity Water Flooding To Enhance Oil Recovery, Mustafa M. Almahfood

Doctoral Dissertations

“Extracting higher amounts of oil from current reservoirs is a necessity for the oil industry to enhance their profitability and sustainability. The desire to recover more oil from the existing reservoirs has led to a growing interest of nanoparticle application in enhanced oil recovery (EOR). However, most researchers have focused on the evaluation and surface modification of non-deformable nanoparticles. This dissertation evaluates the potential of deformable nanogel particles as an EOR material when they are combined with two other promising technologies - surfactant and low salinity water floodings. The particle size distribution, ζ-potential and interfacial tension were measured for a …

Hybrid Rocket Engine Ignition And Control, Benjamin Letourneau, Trevor Blampied, Megan Johnson, Thomas Pham

Honors Theses and Capstones

Control of a hybrid rocket engine is dependent upon a robust system capable of executing commands at precise times. In order to accomplish this, hardware systems must be in place to control the flow of a pressurized gas and provide feedback to launch site personnel. Through the use of solenoid valves and wireless transceivers, control over the thrust of a rocket can be accomplished. In order to understand this information and provide a user-friendly interface to complete this, a launch control module is used. Through the combined capabilities of the two system it becomes possible to test and launch a …

Landing Throttleable Hybrid Rockets With Hierarchical Reinforcement Learning In A Simulated Environment, Francesco Alessandro Stefano Mikulis-Borsoi

Honors Theses and Capstones

In this paper, I develop a hierarchical Markov Decision Process (MDP) structure for completing the task of vertical rocket landing. I start by covering the background of this problem, and formally defining its constraints. In order to reduce mistakes while formulating different MDPs, I define and develop the criteria for a standardized MDP definition format. I then decompose the problem into several sub-problems of vertical landing, namely velocity control and vertical stability control. By exploiting MDP coupling and symmetrical properties, I am able to significantly reduce the size of the state space compared to a unified MDP formulation. This paper …

Analysis Of Energy Economy In Muon Catalyzed Fusion Considering External X-Ray Reactivation, Nishant Raghav Pillai

Masters Theses

"An analysis of the energy economy of a theoretical muon-catalyzed nuclear fusion system has been made by invoking the use of point kinetic equations, Monte Carlo radiation transport simulations, and from a review of existing literature on muon-catalyzed fusion. An external X-ray reactivation source is proposed as a novel way to increase the number of fusions per muon and thereby overcome the so-called alpha sticking problem that has long been considered the primary impediment to breakeven muon-catalyzed fusion power. Free electron lasers, synchrotrons and Wakefield accelerators are discussed as possible bright X-ray photon sources. The addition of an intense external …

Design And Development Of Power Processing Units For Applications In Electrically-Propelled Satellite Systems, Kartikeya Jayadurga Prasad Veeramraju

Masters Theses

"Electrospray technology provides a way to ionize specialized liquids by applying high voltages across a sharp porous tip and a metallic mesh. This technology is widely used in the field of mass spectroscopy for generating ions for testing purposes. The dawn of nano-satellites posed new challenges in the miniaturization of many conventional satellite sub-systems. One significant challenge faced in such a process was the miniaturization of the propulsion system. Electrosprays have started to find their application in the field of Aerospace Engineering and now are formally known as Electrospray Thrusters. These thrusters provide high specific impulse and are attractive substitutes …

Experimental Evaluation Of A Honeycomb Structure In Open Channel Flows, Kyle David Hix

Masters Theses

“Designing and controlling open channel flows presents many challenges. One such challenge is energy dissipation. This challenge is currently addressed by several means, including the use of honeycomb structures. Energy dissipation by honeycomb structures has been studied for pressurized conduit flows; however, their ability to dissipate energy in free-surface flows remains largely unexamined. This work introduces a comprehensive experimental study designed to estimate the energy dissipation through a honeycomb structure in a free-surface flow.

This work examined the energy dissipation for a range of flows, pipe lengths, and pipe diameters in two flumes. PVC pipes ranging from 6 inches to …

Modeling And Control Of Cascaded Bridgeless Multilevel Rectifier Under Unbalanced Load Conditions, Sai Hemanth Kankanala

Masters Theses

“The goal of this project is to model and control a novel unidirectional cascaded multilevel bridgeless rectifier as an active front end in medium and high voltage applications. This topology has many advantages over a conventional cascaded H-bridge rectifier, such as lower implementation cost, higher reliability, and greater flexibility with similar power quality. The complete design process of the proposed converter is developed step by step in order to meet all the desired objectives. The steady-state mathematical model is used to develop a method for the voltage balancing of dc cells. Power factor analysis is discussed to mathematically derive requirements …

Intrinsic Mechanical Properties Of Zirconium Carbide Ceramics, Nicole Mary Korklan

Masters Theses

“This research focuses on the processing and mechanical properties of zirconium carbide ceramics (ZrC_x). The first goal of this project was to densify near stoichiometric (i.e., x as close to 1 as possible) and nominally phase pure ZrC_x. The maximum stoichiometry achieved for the ZrC_x (C/Zr ratio of 0.92) was measured using gas fusion analysis. Hot pressing was used to obtain dense ZrC_x. Archimedes was used to determine the relative density of hot pressed ZrC_x at > 95%. Scanning electron microscopy (SEM) was used to determine the overall microstructure of the hot pressed …

Microgel Placement And Plugging Performance In Sand Filled Fracture For Conformance Control, Baihua Lin

Masters Theses

“Preformed particle gels (PPG) has been widely applied for conformance control in heterogeneous reservoirs with fractures and super-K channels. As a plugging agent, PPG could plug the fractures or high permeability streaks and divert the displacing fluid into low permeability matrix. Many studies have been conducted to investigate the potential of PPGs as a water cut reduction and improved oil recovery agent using homogeneous sandpacks or heterogeneous core samples with man-made open fractures. However, no research has been carried out to understand how PPG injection and plugging performance will be changed if the fractures are filled with sands. Herein, the …

Inclusion Control In Steel Castings, Koushik Karthikeyan Balasubramanian

Masters Theses

“Non-metallic inclusions are mainly comprised of oxides, sulfides, and nitrides, and are formed in liquid steel during the melting and refining process, as a result of reoxidation, worn-out refractories, or entrained slag. The notch toughness of high strength steels is particularly susceptible to the type, number, size, and distribution of non-metallic inclusions. High manganese and aluminum austenitic steels, or Fe-Mn-Al steels, have gained much interest in the military and automotive sector because of their excellent combinations of high strength and toughness. However, these steels are subject to both oxide bifilms and aluminum nitride, AlN, inclusions which form during melting and …

On The Investigation Of Hot Tearing Behavior Of Continuous Cast Steel, Yanru Lu

Masters Theses

”Hot tearing has long been recognized as a major problem that plagues the development of the continuous casting process and results in low-quality products. Understanding of the mechanisms and the required conditions for the hot tearing formation is important for industries but has not been well-established yet. Thus, this research focuses on the hot tearing issue observed in continuous cast steel, by providing a summary of the current research progress and then introducing a new laboratory method to determine the thermo-mechanical properties relevant to hot tearing of different steel grades under different solidification conditions. In this method, an apparatus was …

Micro-Analysis Of Contaminants In Suspended Load And Bank Deposits From The Mineral Fork Creek Watershed In Potosi, Missouri, 2019-2020, William Joseph Miller

Masters Theses

”There are rising concerns pertaining to water contamination produced by toxic heavy metal contaminants such as lead and zinc. For this study, lead, zinc, and barite are three identified contaminants currently threatening Missouri water supplies. A microanalysis of the amounts of lead, zinc, and barite in the water of Mineral Fork Creek was conducted, involving both field and laboratory work. The purpose of the study was to determine the levels of lead, zinc, and barite contaminants, contributing to Big River, by Mineral Fork Creek, in Potosi Missouri, Washington County.

This research study uses a quantitative micro-analysis approach to determine the …

Design And Comparison Of Unoptimized And Optimized Gray Code Multi-Level Systems, Shirly Adams Gamliel

Masters Theses

“As the conventional binary MOS-based VLSI technology is reaching limitations in chip area, speed, and power, new technologies are being researched. Some such technologies relate to multi-level logic design. This thesis explores the process and benefits of applying and optimizing multi-level design techniques to an existing Gray code binary system. Specifically, the multi-level system is designed using CoreMem technology and is optimized using Indira Dugganapally’s optimization techniques.

The first step is generating the n-bit binary and quaternary truth tables for an encoder’s Gray code output and additional desired data. Then, the data for each n-bit system is arranged in multi-level …

Modal Analysis As Non-Destructive Testing Technique For Additively Manufactured 304l Stainless Steel Parts, Tristan N. Cullom

Masters Theses

“Non-Destructive Testing (NDT) methods for Additively Manufactured (AM) parts is an ongoing field of research in the additive community due to its ability to determine if a part can be deemed viable for field usage. This study presents modal analysis as a NDT method for AM parts. For production builds that have multiple copies of the same part, a correcting technique can be used such that the frequencies of the parts under test can be reliably compared against each other, which saves both time and money compared to other traditional NDT methods. This study was able to develop a novel …

3d Printing Reinforced Concrete Structures, Bryce Tyler Tafolla

Masters Theses

"This study aims to investigate a 3D printing method to directly incorporate continuous reinforcement into concrete structures. The ability to design and produce complex structures with optimized topographical configuration can be used to reduce potential material waste while maintaining the required structural strength. Furthermore, the ability to actively incorporate reinforcement into printed members substantially reduces potential labor requirements and eliminates the need to set up formwork.

The study began its initial approach with a manual extrusion process containing reinforcement to observe the necessary constraints required to achieve a printing system with this functionality. The second stage of development was designing …

Influence Of Droplet Velocity, Spacing, And Inter-Arrival Time On Line Formation And Saturation In Binder Jet Additive Manufacturing, Trenton Colton, Nathan B. Crane

Faculty Publications

Binder Jetting (BJ) is a low-cost Additive Manufacturing (AM) process that uses inkjet technology to selectively bind particles in a powder bed. BJ relies on the ability to control, not only the placement of binder on the surface but also its imbibition into the powder bed. This is a complex process in which picoliter-sized droplets impact powder beds at velocities of 1-10 m/s. However, the effects of printing parameters such as droplet velocity, size, spacing, and inter-arrival time on saturation level (fraction of pore space filled with binder) and line formation (merging of droplets to form a line) are unknown. …

Reinventing High School: Understanding The Challenges And Successes Of Transforming Education To Meet Student, Society, And Industry Needs, Scott R. Bartholomew, Greg J. Strimel, Anne M. Lucietto, Mesut Akdere

Faculty Publications

Efforts to revamp existing educational systems and approaches result in various new models in STEM education. Accordingly, a new urban public charter school, located in a Midwest state in the United States, was established in partnership with the state’s land-grant university to create a transformed integrated STEM educational environment characterized by industry-focused and design-based learning to help prepare students for the future of work and learning. This article presents findings from an exploratory study that examined the experiences of teachers and administrative staff of this innovative high school (IHS) during the first year of school operation. A purposive sample of …

Modeling The Influence Of Changes In Aliphatic Structure On Char Surface Area During Coal Pyrolysis, He Yang, Thomas H. Fletcher, Yang Li, Lijun Jin, Sufen Li, Yan Shang, Haoquan Hu

Faculty Publications

The influence of changes in aliphatic structure on char surface area during coal pyrolysis was modeled, and the effect was introduced to a previous char surface area model for lignite pyrolysis established based on the chemical percolation devolatilization (CPD) model. The modified model can predict not only the N2 and CO2 char surface area during rapid pyrolysis of three lignites but also the CO2 char surface area of two high-volatile bituminous coals; the agreement of the modified model with experiments is improved at high temperatures. The decrease in aliphatic chain length can reduce adsorption positions around aromatic core, and decrease …