Engineering Commons^™

Improving Long-Term Vascular Graft Viability Using Peritoneal Pre-Implantation And Epsin-Mimetic Peptides, Mahyar Sameti

Theses and Dissertations

The primary goal of this project was to produce and develop a tissue-engineered small-diameter vascular graft which can replace the arteries and function well for long-term grafting. Implanting an electrospun tubular conduit into the peritoneal cavity to recruit autologous cells prior to grafting the conduit into the artery is a method to achieve this goal. Incorporating an epsin-mimetic peptide on the conduit prior to grafting is another proposed method to reach the goal. This will be accomplished through four complementary studies: (1) determining the effect of a pouch in peritoneal pre-implantation and reducing the potential peritoneal adhesion formation;(2) determining the …

Numerical Analysis Of A Roadway Piezoelectric Harvesting System, Abdul Rahman Badawi

Mechanical & Aerospace Engineering Theses & Dissertations

Highways, streets, bridges, and sidewalks with heavy traffic dissipate a considerable amount of waste mechanical energy every day. Piezoelectric energy harvesting devices are a very promising technology that can convert the waste mechanical energy to clean and renewable energy to enhance the sustainability of infrastructures. Research efforts in large-scale energy harvesting have led to the advancement of piezoelectric devices to the point that large-scale implementation is starting to become more feasible. The energy harvested by these devices can be used in many ways such as providing heating or cooling, melting ice, monitoring structural conditions in bridges and tunnels, and powering …

Synthesis, Characterization, Spectroscopic, And Mesomorphic Studies Of New Schiff Base Ligands And Titanium, Cobalt, Nickel And Copper Metal Centers, Raj K. Gurung

Chemistry & Biochemistry Theses & Dissertations

Transition metal complexes with Schiff base ligands offer a wide application in the field of development of catalysis and material. The straightforward synthesis allowed the structural modification and helped to optimize in various application of such complexes. Titanium-containing complexes have been reported to be important for their catalytic and material applications through the coordination of a tetradentate Schiff base ligand, viz. N, N’-ethylene bis(salicylideneiminate) dianion (salen). Studies reporting the characterization of achiral titanium(IV) salen complexes are scarce due to their intricate nature. Such complexes would be comparatively less expensive and easier to prepare synthetically and thus could represent an …

The Effect Of Compaction Temperature And Pressure On Mechanical Properties Of 3d Printed Short Glass Fiber Composites, Pushpashree Jain Ajith Kumar Jain

Mechanical & Aerospace Engineering Theses & Dissertations

Among many thermoplastics that are used in engineering, polyamide 6 (nylon 6) is an extremely versatile engineering thermoplastic. Nylon filled with glass fibers has higher mechanical strength and high wear resistance than general purpose nylon. 3D printed composites, based on fused filament modeling, typically suffer from poor bead-to-bead bonding and relatively high void content, limiting their mechanical properties

This thesis explores the effect of compaction pressure and temperature on improving the mechanical properties of 3D printed composites. Engineering moduli in the printing and transverse to printing direction, as well as ultimate strength were measured using the tensile testing with Digital …

Onboard Autonomous Controllability Assessment For Fixed Wing Suavs, Brian Edward Duvall

Mechanical & Aerospace Engineering Theses & Dissertations

Traditionally fixed-wing small Unmanned Arial Vehicles (sUAV) are flown while in direct line of sight with commands from a remote operator. However, this is changing with the increased popularity and ready availability of low-cost flight controllers. Flight controllers provide fixed-wing sUAVs with functions that either minimize or eliminate the need for a remote operator. Since the remote operator is no longer controlling the sUAV, it is impossible to determine if the fixed-wing sUAV has proper control authority. In this work, a controllability detection system was designed, built, and flight-tested using COTS hardware. The method features in-situ measurement and analysis of …

Optimal Collaborative Path Planning For Unmanned Surface Vehicles Carried By A Parent Boat Along A Planned Route, Ari Carisza Graha Prasetia, I-Lin Wang, Aldy Gunawan

Research Collection School Of Computing and Information Systems

In this paper, an effective mechanism using a fleet of unmanned surface vehicles (USVs) carried by a parent boat (PB) is proposed to complete search or scientific tasks over multiple target water areas within a shorter time . Specifically, multiple USVs can be launched from the PB to conduct such operations simultaneously, and each USV can return to the PB for battery recharging or swapping and data collection in order to continue missions in a more extended range. The PB itself follows a planned route with a flexible schedule taking into consideration locational constraints or collision avoidance in a real-world …

Dyeing Properties And Color Fastness Of Eri Silk Yarn Dyed With Soaked Red Kidneybean Water, Piyaporn Kampeerapappun, Kritsana Wongwandee, Siriluk Janon

Journal of Metals, Materials and Minerals

The purpose of this research was to study the dyeing of eri silk yarn using soaked red bean water. The optimal condition for preparing dye solutions was a ratio of 1:5 of dried red bean to water and dyeing at 100°C for 45 min. The dyeing process was conducted with and without mordants, using three different mordanting methods; pre-mordanting, meta-mordanting, and post-mordanting. The effects on silk analyzed are color fastness to washing, wet and dry rubbing, acid and alkali perspiration, and color characteristics on CIEL*a*b* color coordinates.Without mordants, the dyed silk yarn gave a rosy brown color. Each mordant caused …

Effect Of Variations In The Composition And Size Of Red Sand Grains On The Quality Of K-225 Concrete, Mukti Hamjah Harahap, Aulia E. Putri

Journal of Metals, Materials and Minerals

The effect of variations in the composition and size of red sand grains on the solid quality made in the form of a 15×15×15 cm cubes were investigated. By implementing the standard of SNI K-225 which is a mixture of 1:1.9:2.8 with FAS 0.6 and the composition of red sand consisting of 0, 2, 4, 5,and 6.5% of the weight of fine aggregate and variations in the size of red sand grains of 80, 100, and 120 mesh, the concrete was being treated in a water bath for 28 days. It was tested by the method of water absorption, compressive …

Racial Diversity In Aviation, Lindsay Stevenson, Haydee M. Cuevas, Katie S. Kirkpatrick

Student Works

Commercial aviation has grown rapidly since the 1950s yet racial diversity in the aviation workforce has showed little progress. To explore this issue, this archival study was conducted to examine the representation of Black individuals in aviation occupations and other specialized professions from 2009 to 2018. Data were obtained from the American Community Survey using Public Use Microdata Sample from the United States Census Bureau. The frequency count and percent were calculated each year for each occupation by race (White or Black). Five aviation occupations were selected for comparison: aircraft pilot and flight engineer; air traffic controller and airfield operations …

Radio Frequency Emissions From Dark-Matter-Candidate Magnetized Quark Nuggets Interacting With Matter, J. Pace Vandevender, C. Jerald Buchenauer, Chunpei Cai, Aaron P. Vandevender, Benjamin A. Ulmen

Michigan Tech Publications, Part 1

Quark nuggets are theoretical objects composed of approximately equal numbers of up, down, and strange quarks. They are also called strangelets, nuclearites, AQNs, slets, Macros, and MQNs. Quark nuggets are a candidate for dark matter, which has been a mystery for decades despite constituting ~ 85% of the universe’s mass. Most previous models of quark nuggets have assumed no intrinsic magnetic field; however, Tatsumi found that quark nuggets may exist in magnetars as a ferromagnetic liquid with a magnetic field BS = 1012±1 T. We apply that result to quark nuggets, a dark-matter candidate consistent with the Standard Model, and …

Properties And Performance Of The Basalt-Fiber Reinforced Texture Roof Tiles, Parinya Chakartnarodom, Wichit Prakaypan, Pitcharat Ineure, Nutthita Chuankrerkkul, Edward A. Laitila, Nuntaporn Kongkajun

Michigan Tech Publications, Part 1

The mechanical and the physical properties, and the performance of texture roof tiles reinforced with the basalt fibers were observed. The samples of the basalt-fiber reinforced texture roof tiles were produced on the industrial scale by using filter pressing method. After forming, the as-molded samples were air cured and characterized based on ASTM C1185 standard for their mechanical properties and physical properties. In addition, the roof-tile installation test was also performed. The results showed that the samples of the basalt-fiber reinforced texture roof tile (BFRT) could be produced on the industrial scale by using the common setting of the forming …

Soil-Cement Bricks Produced From Local Clay Brick Waste And Soft Sludge From Fiber Cement Production, Nuntaporn Kongkajun, Edward A. Laitila, Pitcharat Ineure, Wichit Prakaypan, Benya Cherdhirunkorn, Parinya Chakartnarodom

Michigan Tech Publications, Part 1

Soil-cement bricks were produced using local clay brick waste (CBW) and soft sludge (SS) from fiber-cement industries, preserving raw resources by substituting with industrial wastes. The control formula to produce soil-cement bricks, is 15 wt% Portland cement, 15 wt% sand, and 70 wt% laterite. Clay brick waste was added with values from 10 to 50 % of laterite weight in the control formula. For SS, 5 and 10 % was used to replace the total weight of the dry mixture in the control formula. The samples were shaped by using a manual brick making machine. The results showed that the …

An Exploratory Study Of Pulse Width And Delta Sigma Modulators, Logan B. Penrod

Master's Theses

This paper explores the noise shaping and noise producing qualities of Delta-Sigma Modulators (DSM) and Pulse-Width Modulators (PWM). DSM has long been dominant in the Delta Sigma Analog-to-Digital Converter (DSADC) as a noise-shaped quantizer and time discretizer, while PWM, with a similar self oscillating structure, has seen use in Class D Power Amplifiers, performing a similar function. It has been shown that the PWM in Class D Amplifiers outperforms the DSM [1], but could this advantage be used in DSADC use-cases? LTSpice simulation and printed circuit board implementation and test are used to present data on four variations of these …

Video Based Automatic Speech Recognition Using Neural Networks, Alvin Lin

Master's Theses

Neural network approaches have become popular in the field of automatic speech recognition (ASR). Most ASR methods use audio data to classify words. Lip reading ASR techniques utilize only video data, which compensates for noisy environments where audio may be compromised. A comprehensive approach, including the vetting of datasets and development of a preprocessing chain, to video-based ASR is developed. This approach will be based on neural networks, namely 3D convolutional neural networks (3D-CNN) and Long short-term memory (LSTM). These types of neural networks are designed to take in temporal data such as videos. Various combinations of different neural network …

Towards On-Device Detection Of Sharks With Drones, Daniel Moore

Master's Theses

Recent years have seen several projects across the globe using drones to detect sharks, including several high profile projects around alerting beach authorities to keep people safe. However, so far many of these attempts have used cloud-based machine learning solutions for the detection component, which complicates setup and limits their use geographically to areas with internet connection. An on-device (or on-controller) shark detector would offer greater freedom for researchers searching for and tracking sharks in the field, but such a detector would need to operate under reduced resource constraints. To this end we look at SSD MobileNet, a popular object …

Improvement Of Labyrinth Seal Leakage Rates Using Additive Manufacturing, Austin L. Gasbarra

Master's Theses

The growing popularity of additive manufacturing in commercial applications has al- lowed for new ideas and new ways of thinking when designing components. Further optimization at the component level is possible, though powder metallurgy is in its infancy. This study explores the possibility of using additive manufacturing to develop better labyrinth seals in turbomachinery. Labyrinth seals have a torturous fluid path with high losses, thus limiting the amount of fluid leakage. These types of seals can be non-rotating, allowing them to better take advantage of the additive manufacturing process due to the absence of rotating stresses. Labyrinth seal performance is …

Interplanetary Trajectory Optimization With Automated Fly-By Sequences, Emily Ann Doughty

Master's Theses

Critical aspects of spacecraft missions, such as component organization, control algorithms, and trajectories, can be optimized using a variety of algorithms or solvers. Each solver has intrinsic strengths and weaknesses when applied to a given optimization problem. One way to mitigate limitations is to combine different solvers in an island model that allows these algorithms to share solutions. The program Spacecraft Trajectory Optimization Suite (STOpS) is an island model suite of heterogeneous and homogeneous Evolutionary Algorithms (EA) that analyze interplanetary trajectories for multiple gravity assist (MGA) missions. One limitation of STOpS and other spacecraft trajectory optimization programs (GMAT and Pygmo/Pagmo) …

Personality And Mood For Non-Player Characters: A Method For Behavior Simulation In A Maze Environment, Noah L. Paige

Master's Theses

When it comes to video games, immersion is key. All types of games aim to keep the player immersed in some form or another. A common aspect of the immersive world in most role-playing games -- but not exclusive to the genre -- is the non-playable character (NPC). At their best, NPCs play an integral role to the sense of immersion the player feels by behaving in a way that feels believable and fits within the world of the game. However, due to lack of innovation in this area of video games, at their worst NPCs can jar the player …

Emergency Landing And Guidance System, Joseph Alarid

Master's Theses

Every year there are thousands of aviation accidents along with hundreds of human deaths that happen around the world. While the data is sparse, it is well documented that many of these happen from emergency landings gone awry. While pilots can generally make great landings in clear daytime conditions, they are significantly handicapped when it comes to landing at night or amongst poor visibility conditions.

Due to the nature of this problem and some of the large scale advances in software technology we propose a solution that provides a significant improvement from the status quo. Using transfer learning on neural …

Iot Camera System For Monitoring Strawberry Fields, Simon Schoennauer

Master's Theses

A wireless imaging system for monitoring strawberry fields provides enough quality image data for computer vision algorithms to make meaningful yield predictions. This report contains a design for a wireless sensor network modified with mesh networking techniques to extend coverage range and a solar energy harvesting system to improve sensor node lifetime. A two hop system with six nodes is implemented in a laboratory environment validating the communication systems integrity over an 800’ range. Moving from a primary battery system to solar energy harvesting increases the module lifetime indefinitely.

Numerical Analysis Of A Circulation Control Wing, Luke W. Bodkin

Master's Theses

The objective of this thesis was to develop an experimental method to research circulation control wings using numerical analysis. Specifically, it is of interest to perform 3D wind tunnel testing on a circulation control wing in the Cal Poly Low Speed Wind Tunnel (CPLSWT). A circulation control wing was designed and analyzed to determine the feasibility of this testing.

This study relied on computational fluid dynamics (CFD) simulations as a method to predict the flow conditions that would be seen in a wind tunnel test. A CFD simulation was created of a wing model in a wind tunnel domain. Due …

A Novel Method To Commercialize Medical Devices Initially Developed At California Polytechnic State University San Luis Obispo, Christina Grigorian

Master's Theses

California Polytechnic State University, San Luis Obispo is a university that encourages students to approach learning hands-on. As such, there is cutting-edge technology being developed by students in all departments on campus. Being that the university possesses an outstanding biomedical engineering department, there are groundbreaking medical devices that students are creating at Cal Poly SLO. These are devices that can better the lives of individuals suffering from ailments or fulfill needs in the medical industry. Subsequently, it is vital that these devices make it out of campus laboratories and into the hands of consumers. In order to move a product …

Analysis Of Electroanatomic Mapping System Accuracy Using X-Ray Reconstruction Of Electrode Locations In A Porcine Animal Model, Hana Boudlali

Master's Theses

Fluoroscopy is considered the gold standard for locating catheters during cardiac electrophysiology (EP) procedures. However, fluoroscopy emits ionizing radiation which can lead to adverse health effects when exposed to in high doses (World Health Organization, 2016). Electroanatomic mapping (EAM) systems display the three-dimensional location of EP catheters and measure the local electrical activity of the heart. They can minimize a physician’s reliance on fluoroscopy and can help reduce radiation exposure during a case (Casella, 2011).

EAM systems are diagnostic medical devices that inform the placement of ablation therapy and must accurately locate catheters to be deemed safe. Test methods to …

A Protocol For Achieving Adherent Cell Culture Within A Microfluidic Device, Tarra Danielle Sanders

Master's Theses

The goal of this study is to design a protocol for the adherent cell culture within a novel microfluidic device. Microscale cell culture protocols were developed for loading cells using poly-L-lysine to enhance adherent cell culture of murine derived NIH 3T3 fibroblasts. This work sought to develop a method for adherent microculture by examining various sterilization, surface treatment, and seeding techniques. Using a vacuum suction loading technique, air plasma treatment and a poly-L-lysine surface treatment adherent cell culture was observed within the device. The work presented here is part of a collaborative effort that aims to develop protocols for the …

Spacecraft Trajectory Optimization Suite (Stops): Design And Optimization Of Multiple Gravity-Assist Low-Thrust (Mgalt) Trajectories Using Modern Optimization Techniques, Michael G. Malloy

Master's Theses

The information presented in the thesis is a continuation of the Spacecraft Trajectory Optimization Suite (STOpS). This suite was originally designed and developed by Timothy Fitzgerald and further developed by Shane Sheehan, both graduate students at California Polytechnic State University, San Luis Obispo. Spacecraft utilizing low-thrust transfers are becoming more and more common due to their efficiency on interplanetary trajectories, and as such, finding the most optimal trajectory between two planets is something of interest. The version of STOpS presented in this thesis uses Multiple Gravity-Assist Low-Thrust (MGALT) trajectories paired with the island model paradigm to accomplish this goal. The …

B-Plane Targeting With The Spacecraft Trajectory Optimization Suite, Jared Graef

Master's Theses

In interplanetary trajectory applications, it is common to design arrival trajectories based on B-plane target values. This targeting scheme, B-plane targeting, allows for specific target orbits to be obtained during mission design. A primary objective of this work was to implement B-plane targeting into the Spacecraft Trajectory Optimization Suite (STOpS). This work was based on the previous versions of STOpS done by Fitzgerald and Sheehan, however STOpS was redeveloped from MATLAB to python. This updated version of STOpS implements 3-dimensional computation, departure and arrival orbital phase modeling with patched conics, B-plane targeting, and a trajectory correction maneuver. The optimization process …

Incorporating Shear Resistance Into Debris Flow Triggering Model Statistics, Noah J. Lyman

Master's Theses

Several regions of the Western United States utilize statistical binary classification models to predict and manage debris flow initiation probability after wildfires. As the occurrence of wildfires and large intensity rainfall events increase, so has the frequency in which development occurs in the steep and mountainous terrain where these events arise. This resulting intersection brings with it an increasing need to derive improved results from existing models, or develop new models, to reduce the economic and human impacts that debris flows may bring. Any development or change to these models could also theoretically increase the ease of collection, processing, and …

Understanding The Effects Of Long-Duration Spaceflight On Fracture Risk In The Human Femur Using Finite Element Analysis, Keyanna Brielle Henderson

Master's Theses

Long-duration spaceflight has been shown to have significant, lasting effects on the bone strength of astronauts and to contribute to age-related complications later in life. The microgravity environment of space causes a decrease in daily mechanical loading, which signals a state of disuse to bone cells. This affects the bone remodeling process, which is responsible for maintaining bone mass, causing an increase in damage and a decrease in density. This leads to bone fragility and decreases overall strength, posing a risk for fracture. However, there is little information pertaining to the timeline of bone loss and subsequent fracture risk.

This …

Impact Of Soil Properties On Removal Of Emerging Contaminants From Wastewater Effluent During Soil Aquifer Treatment, Lauren N. Riley

Master's Theses

This study evaluates soil properties that impact the effectiveness of soil aquifer treatment (SAT) as a polishing step to the remove two classes of ECs from wastewater effluent: pharmaceuticals and personal care products (PPCPs), and engineering nanomaterials (ENMs). In recent years, it has been determined that elevated levels of emerging contaminants (ECs) are being released into the environment with wastewater effluent. ECs are proven to cause adverse environmental and health effects as a result of long-term exposure. It is important to evaluate sustainable solutions to improve the current methods of wastewater treatment to address these ECs.

Soil aquifer treatment (SAT) …

Finite Element Analysis Of Total Knee Arthroplasty, Sean Yueh

Master's Theses

The total knee arthroplasty (TKA) has become one of the most successful procedures in all of medicine, with an average of over 966,000 operations performed a year. Since its introduction in 1968, the TKA’s surgical process and implant designs have continuously been improved to increase survivability. However, the need for a revision TKA – due to aseptic loosening – continues to be a problematic aspect of the procedure. Stress shielding induced by different design parameters of the implant has generated controversy in the determination of an ideal configuration. The purpose of this study is to investigate how implant design parameters …