Engineering Commons^™

Effects Of Cyclic Heating And Water Cooling On The Physical Characteristics Of Granite, Xiangchao Shi, Leiyu Gao, Jie Wu, Cheng Zhu, Shuai Chen, Xiao Zhuo

Henry M. Rowan College of Engineering Departmental Research

This paper aims to study the effect of cyclic heating and flowing-water cooling conditions on the physical properties of granite. Ultrasonic tests, gas measured porosity, permeability, and microscope observations were conducted on granite after thermal treatment. The results showed that the velocity of P- and S-waves decreased as the number of thermal cycles increased. The porosity increased with the number of the thermal cycles attained at 600 °C, while no apparent changes were observed at 200 and 400 °C. The permeability increased with the increasing number of thermal cycles. Furthermore, microscope observations showed that degradation of the granite after thermal …

Otx2 Represses Sister Cell Fate Choices In The Developing Retina To Promote Photoreceptor Specification, Miruna Georgiana Ghinia Tegla, Diego F. Buenaventura, Diana Y. Kim, Cassandra Thakurdin, Kevin C. Gonzalez, Mark M. Emerson

Publications and Research

During vertebrate retinal development, subsets of progenitor cells generate progeny in a non-stochastic manner, suggesting that these decisions are tightly regulated. However, the gene-regulatory network components that are functionally important in these progenitor cells are largely unknown. Here we identify a functional role for the OTX2 transcription factor in this process. CRISPR/Cas9 gene editing was used to produce somatic mutations of OTX2 in the chick retina and identified similar phenotypes to those observed in human patients. Single cell RNA sequencing was used to determine the functional consequences OTX2 gene editing on the population of cells derived from OTX2-expressing retinal progenitor …

3d-Printed Biomimetic Bioactive Glass Scaffolds For Bone Regeneration In Rat Calvarial Defects, Krishna C. R. Kolan, Yue-Wern Huang, Julie A. Semon, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

The pore geometry of scaffold intended for the use in the bone repair or replacement is one of the most important parameters in bone tissue engineering. It affects not only the mechanical properties of the scaffold but also the amount of bone regeneration after implantation. Scaffolds with five different architectures (cubic, spherical, x, gyroid, and diamond) at different porosities were fabricated with bioactive borate glass using the selective laser sintering (SLS) process. The compressive strength of scaffolds with porosities ranging from 60% to 30% varied from 1.7 to 15.5 MPa. The scaffold's compressive strength decreased significantly (up to 90%) after …

Optimizing Athletic Throwing Power For Increased Training Efficiency, Ian Ghanavati, Curtis Tomasevicz

UCARE: Research Products

A summary on the investigation of the mechanics of weighted baseball pitching.

• The demand for higher pitch velocity has increased at all levels of competitive play within baseball • Weighted baseball training programs are a common way to increase pitch velocity • The efficacy and safety of weighted ball throwing is not fully understood • The aim of this study is to further investigate the mechanics of pitching under and overweight balls in order to better understand their role in athletic training

Minet Magnetic Indoor Localization, Michael Drake

Honors Theses

Indoor localization is a modern problem of computer science that has no unified solution, as there are significant trade-offs involved with every technique. Magnetic localization, though less popular than WiFi signal based localization, is a sub-field that is rooted in infrastructure-free design, which can allow universal setup. Magnetic localization is also often paired with probabilistic programming, which provides a powerful method of estimation, given a limited understanding of the environment. This thesis presents Minet, which is a particle filter based localization system using the Earth's geomagnetic field. It explores the novel idea of state space limitation as a method of …

Emissivity Measurements Of Painted And Aerosol Deposited Thermographic Phosphors (Yag:Dy And Mfg:Mn), Wendy Flores-Brito

Mechanical Engineering ETDs

Combustion is one of the most difficult processes to model. Luminous flames are characteristically sooty, which creates a problem when modeling and calculating the combustion and heat transfer of the process; both of which are highly dependent on temperature and emissivity. Soot particle emissivity as well as gas contributions affect the heat transfer calculation and must be accounted for.

Thermographic phosphors (TP) are ceramic based phosphorescent materials that have a temperature dependent emission that can be exploited to obtain surface and gas temperature measurements, as well as 2D temperature maps. Emissivity knowledge is not needed to obtain temperature and is …

Effect Of Micropiles On Clean Sand Liquefaction Risk Based On Cpt And Spt, Visar Farhangi, Moses Karakouzian, Marten Geertsema

Civil and Environmental Engineering and Construction Faculty Research

Liquefaction is a hazardous seismic-based phenomenon, which causes an abrupt decrease in soil strength properties and can result in the massive destruction of the built environment. This research presents a novel approach to reduce the risk of soil liquefaction using jet-grouted micropiles in clean sands. The saturated soil profile of the study project mainly contains clean sands, which are suitable to more reliably employ simplified soil liquefaction analyses. The grouting is conducted using 420 micropiles to increase the existing soil properties. The effect of jet grouting on reducing the potential of liquefaction is assessed using the results of the cone …

Development Of A Novel Vehicle Guidance System: Vehicle Risk Mitigation And Control, Michael Sweigard

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Over a half of fatal vehicular crashes occur due to vehicles leaving their designated travel lane and entering other lanes or leaving the roadway. Lane departure accidents also result in billions of dollars in cost to society. Recent vehicle technology research into driver assistance and vehicle autonomy has developed to assume various driving tasks. However, these systems are do not work for all roads and travel conditions. The purpose of this research study was to begin the development a novel vehicle guidance approach, specifically studying how the vehicle interacts with the system to detect departures and control the vehicle

A …

Load Truncation Approach For Development Of Live Load Factors For Bridge Rating, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Various local governments have developed state-specific vehicular live load factors for bridge rating. However, a significant computational demand is often associated with such an effort. This is due to the large size of the weigh-in-motion (WIM) databases frequently used in the procedure. In this study, a method is proposed that can significantly reduce the computational cost of the analysis, while still maintaining reasonable accuracy. The proposed approach develops approximate live load random variable statistics by truncating the WIM database based on gross vehicle weight, then a complete reliability analysis is conducted to develop new live load factors that meet AASHTO-specified …

Upgrading Cracking Waste To Rubber Precursors Via Oxidative Dehydrogenation, Andrew Mason, Delaney Franck, Firdvas Nasimov, Lindsey Jarema, Gitau Wambugu

Department of Chemical and Biomolecular Engineering: Funded Proposals

To: Dr. Yasar Demirel, Professor, University of Nebraska-Lincoln

As the result of process changes within an ethylene cracking plant, the amount of a C4 byproduct waste stream has significantly increased (Fabiano, Nedwick 1999). A system of extractive distillation and catalytic oxidative dehydrogenation can be used to add value to this C4 waste stream by producing high purity 1,3-Butadiene, an important rubber precursor. 1,3-Butadiene is a critical component of multiple consumer goods, including automobile tires and synthetic rubber and has a steadily increasing demand, reaching 10 million metric tons in 2012 (Biddy, Scarlata, Kinchin, 2016). The simulation assumes a feed flow …

Nanomechanical Characterization Of Fuel Cell Ionomers, Jackson Goddard

UCARE: Research Products

Energy sustainability can be achieved by improving and adopting clean energy technologies, and a better nanoscale understanding of ionomer-catalyst layers could lead to increased efficiency of proton exchange membrane fuel cells. Samples of Nafion ( Perfluorosulfonic acid ionomer) and PFIA (Perfluoroimide acid ionomer) of varying film thickness were prepared and then studied using contact resonance force microscopy. It was determined that storage and loss modulus increase as relative humidity increases and ionomer film thickness goes below 100 nm. Furthermore, in this specific study, the similar storage and loss modulus of Nafion and PFIA could be attributed to similar backbone structure …

Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian

Journal of Electrochemistry

Single-chamber solid oxide fuel cell (SC-SOFC) is a special type of fuel cells, in which both an anode and a cathode are placed in one chamber. Its working principle relies on the selective catalytic activity of the electrodes towards fuel and oxidant in a gas mixture, leading to the generation of an electromotive force. Because of its unique principle and structure, SC-SOFC has many advantages such as sealing-free, easy stacking, quick start-up and no carbon deposition, thus, it possesses large potential in application. Herein, the principles and characteristics of SC-SOFC are introduced. Furthermore, the SC-SOFC materials, micro-stack design, degeneration mechanisms …

Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen

Journal of Electrochemistry

Cathode material Li₂MnO₃ has received more and more attention owing to its high theoretical capacity (459 mAh·g ^-1). However, the low initial coulombic efficiency and the poor cycle stability hamper its practical application in lithium-ion batteries. Herein, we investigated the crystal structure and electrochemical performance of Li₂MnO₃ by introducing MgF₂ coating layer. The results indicated that the conversion of partial layer Li₂MnO₃ to spinel phase induced by MgF₂ coating could reduce the initial irreversible capacity and improve the first cycle efficiency. The initial coulombic efficiencies of the 0.5wt.%, …

Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng

Journal of Electrochemistry

The tantalum ion (Ta ⁵⁺) doped garnet-type inorganic solid electrolyte Ta-LLZO was prepared by solid state reaction, and the effect of doping amount on the properties of the materials was investigated. The materials were characterized by X-ray diffraction (XRD), field emission electron scanning microscopy (FESEM) and electrochemical impedance spectroscopy (EIS). And the cycle stability was tested by assembly of LiFePO₄//LLZTO//Li all solid lithium battery. The results show that with the increase of Ta ⁵⁺ doping amount, the material appeared to form a single cubic phase structure. When the Ta ⁵⁺ doping content became 14.09wt.%, x=0.3, the …

Développement D’Outils Pour L’Évaluation Du Processus D’Implantation Et L’Analyse Économique D’Une Intervention Ergonomique : Le Cas D’Une Intervention De Prévention Des Troubles Musculosquelettiques Dans L’Industrie De L’Abattage Et De La Transformation De La Volaille, Émilie Desjardins, Hélène Sultan-Taïeb, France St-Hilaire, Nicole Vézina, Élise Ledoux, Patricia Bélanger, Rita Naji

Rapports de recherche scientifique

Depuis les années 1990, Nicole Vézina et son équipe ont réalisé des travaux de recherche qui ciblent l’apprentissage de l’affilage et de l’aiguisage des couteaux dans un objectif de prévention des troubles musculosquelettiques (TMS). Le cas à l’étude est une intervention implantée dans le département d’éviscération d’une usine d’abattage et de transformation de la volaille située au Québec. Il s’agit d’une intervention ergonomique de prévention des TMS avec plusieurs types de transfert d’apprentissage dans un contexte de travail à la chaîne à cadence élevée. L’objectif général de cette étude était de développer des outils de collecte de données adaptés aux …

Turbulence Modulation In Particle-Laden Stationary Homogeneous Isotropic Turbulence Using One-Dimensional Turbulence, Marco Fistler, Alan Kerstein, David O. Lignell, Michael Oevermann

Faculty Publications

Turbulence modulation in particle-laden stationary homogeneous isotropic turbulence is investigated using one-dimensional turbulence (ODT), a low-dimensional stochastic flow simulation model. For this purpose, ODT is extended in two ways. First, a forcing scheme that maintains statistical stationarity is introduced. Unlike direct numerical simulation (DNS) of forced turbulence, the ODT framework accommodates forcing that is not directly coupled to the momentum equation. For given forcing the ODT energy dissipation rate is therefore the same in particle-laden cases as in the corresponding single-phase reference case. Second, previously implemented one-way-coupled particle phenomenology is extended to two-way coupling using the general ODT methodology for …

Modeling And Simulation Of Stochastic Neutron And Cumulative Deposited Fission Energy Distributions, Patrick O'Rourke

Nuclear Engineering ETDs

Methods of stochastic neutron transport are investigated and applied to novel formulations for the neutron number distribution and the cumulative fission energy deposition distribution. We utilize two Monte Carlo algorithms: the event-based Monte Carlo (EBMC) method and the Stochastic Simulation Algorithm (SSA) to benchmark and analyze systems. We show that the SSA outperforms the EBMC for the parameter space we are interested in. We then utilize the SSA to analyze systems composed of multiple spherical regions with fast and thermal neutrons with time-dependent reactivity insertions and determine whether group-dependent number distributions approach a gamma distribution. We develop two methods for …

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang

Journal of Electrochemistry

A site deficient (La_0.8Sr_0.2)_0.95MnO₃ (LSM95) powder was synthesized by solid state reaction as a cathode material. The commercial Zr_0.9Sc_0.1SO_1.95 (SSZ) was selected as an electrolyte material and La_0.8Sr_0.2Cr_0.5Mn_0.5O₃- (LSCrM) was synthesized by sol-gel method as an anode material. Accordingly, single cells of LSCrM-CeO₂|SSZ|3YSZ-LSM95 were prepared by tape casting, sintering and impregnation. The single cell test results for LSCrM-CeO₂|SSZ|3YSZ-LSM95 with 0.11 g·cm ^-2 CeO₂ and using CH₄ as a fuel showed the power …

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan

Journal of Electrochemistry

Carbon is richly reserved in coal, biomasses, and many other nature resources. It is usually used as an energy source through oxygen oxidation reaction. The oxidation is generally realized through combustion which causes serious air pollution. Besides, the conversion efficiency of generating electricity through the combustion process is limited by Carnot efficiency. A direct carbon solid oxide fuel cell (DC-SOFC) is a solid oxide fuel cell (SOFC) directly operated with solid carbon as the fuel. It can convert the chemical energy of carbon into electricity with high efficiency. The concentration of produced CO₂ from a DC-SOFC is so high …

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie

Journal of Electrochemistry

Solid oxide electrolysers are now attracting much more attentions because they can efficiently produce fuels by electrolyzing H₂O/CO₂. In this paper, a comprehensive introduction to the recent progress in the development of fuel electrode (cathode) materials is provided. The advantages, disadvantages and development trend towards various cathode materials are pointed out. The key scientific and technological problems in this field are emphasized.

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu

Journal of Electrochemistry

Solid oxide electrolysis cell is an advanced energy conversion device with high efficiency, simplicity, flexibility, and environmental friendliness. It is currently a research hotspot in the international energy field. This paper introduces and analyzes the basic principles, key materials, system components and developments of solid oxidation electrolysis cells. Furthermore, the recent research progresses, challenges and future development directions in solid oxidation electrolysis cells in the field of high-efficiency hydrogen production are summarized and outlined.

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan

Journal of Electrochemistry

For pervasive applications of fuel cells, highly efficient and economical materials are required to replace Pt-based catalysts for oxygen reduction reaction (ORR). In this study, the NiO@rGO, Pd-NiO@rGO and Ag-NiO@rGO nanoparticles were synthesized, and their catalytic performances toward ORR were investigated. The results revealed that all the three materials were capable of catalyzing ORR, but both the Pd-NiO@rGO and Ag-NiO@rGO showed the better performances compared with the NiO@rGO in terms of the reaction pathway being 4-electron process, the increases of the onset potential and the intermediate yielding rate, as well as the extended stability. Moreover, the effect of Pd modification …

Synthetic Lethality In Pediatric Brain Cancer Cells By Optimized Plga Nanoparticles And Drug Combinations, Megan Ruckman, Megan Otte, Forrest Kievit

UCARE: Research Products

Here we test drugs effectiveness to inhibit various DNA repair pathways with the purpose of sensitizing cancer cells to radiotherapy. We work on optimizing delivery of DNA repair pathway inhibiting drugs by the use of PLGA nanoparticles.

Performance Of Malware Classification On Machine Learning Using Feature Selection, Nusrat Asrafi

Master of Science in Computer Science Theses

The exponential growth of malware has created a significant threat in our daily lives, which heavily rely on computers running all kinds of software. Malware writers create malicious software by creating new variants, new innovations, new infections and more obfuscated malware by using techniques such as packing and encrypting techniques. Malicious software classification and detection play an important role and a big challenge for cyber security research. Due to the increasing rate of false alarm, the accurate classification and detection of malware is a big necessity issue to be solved. In this research, eight malware family have been classifying according …

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia

Journal of Electrochemistry

Solid oxide electrolysis cells (SOECs) have stimulated wide interests for their promising application in the reduction of CO₂ emissions and the storage of renewable energy. Here, the advances made in the development of cathode materials including cermets and perovskite oxides in our research group, are summarized, along with the design of cell configurations. The electrochemical kinetics and performances of cathodes and cells are discussed and analyzed. It is expected that this brief review offers critical insights and useful guidelines for developing superior electrodes and SOECs in the future.

Energy Dissipation Of Type A Piano Key Weirs, Kam R. Eslinger, Brian M. Crookston

Publications

A Piano Key weir (PK weir) is a nonlinear, labyrinth-type weir well suited for rehabilitation projects due to a relatively small footprint and the ability to pass large discharges for lesser upstream-head values when compared with other weir types. A critical component of a hydraulic structure is the energy-dissipative properties. Currently, information and guidance is limited, with previous energy dissipation studies of PK weirs primarily of specific projects. Therefore, to document and quantify energy dissipation, four laboratory-scale Type A PK weir models with different width ratios (W_i/W_o) were studied, with 255 tests comprising this new …

Controller And Headset Stand: Designing And Manufacturing, Tyler Butler, Chad Gutierrez

Honors Theses

This report shows how our Senior Center for Manufacturing Excellence team took our product, a controller and headset stand, from an idea into a mass producible product. We first identified the problem of headphones and controller storage and sought to solve it through our product design. Market research was performed to ensure that this would be a successful product in today’s marketplace. The trials of prototypes demonstrated what features could and could not be implemented into the design of the product. The group then designed a manufacturing plan for the product and found the projected market for the product. This …

Evaluation And Update Of Mash Test Vehicles, Kellon B. Ronspies

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The Manual for Assessing Safety Hardware (MASH) requires full-scale crash testing of roadside features using worst practical impact conditions. Vehicle selection for full-scale crash testing is intended to be representative of the contemporary passenger vehicle fleet. Researchers at the Midwest Roadside Safety Facility (MwRSF) investigated attributes of passenger vehicle sales to determine if the vehicle selection criteria shown in MASH should be revised to accommodate changes in the vehicle fleet. A methodology was considered to affordably re-analyze the vehicle fleet when necessary to ensure MASH vehicle selection criteria are reflective of vehicles currently on roadways.

Representative vehicles were documented using …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• Nordson Builds Scholarship

Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a generating device by electrochemical reaction to transfer the chemical energy of fossil fuels (coal, oil and gas, etc.), the biomass fuel or other hydrocarbon fuels directly into electricity with higher energy conversion efficiency and lower pollution, which is recognized to be efficient green energy technology in the 21st century. However, when hydrocarbons are directly used as fuel, carbon deposition is easy to occur in nickel-based anode, thus, losing electrochemical catalytic activity. Fuel pre-reforming on the outside of the anode is an effective solution, which strongly relies on highly efficient and stable reforming catalysts. …