Engineering Commons^™

Advanced Video Laryngoscope And Automatic Data Collection System, Gabrielle Hoyer, Sean Runnels, Samer Merchant

Utah Space Grant Consortium

The Advanced Video Laryngoscope is designed to address the high stress situation of an inexperienced healthcare provider performing an intubation on a patient. The technology is superior to current video laryngoscopes in that it utilizes machine learning techniques to guide the healthcare provider in real-time, providing augmented reality cues to anatomical features, feedback to prevent critical levels of deoxygenation of the patient, and an automated system to assess the difficulty of airway and call on the assistance of other physicians if first-pass intubation is not successful. By providing real-time assistance to the operator, this device will increase the success rate …

Assessing The Impact Of Drop Velocity And Spacing In Binder Jetting To Improve Printing In Novel Powders And New Environments, Trenton Colton

Utah Space Grant Consortium

Binder Jetting (BJ) is a low-cost Additive Manufacturing (AM) process that uses inkjet technology to selectively bind particles in a powder bed. The interaction of the binder droplets with the powder is essential to the process. This is a complex interaction in which picoliter-sized droplets impact powder beds at velocities of approximately 10 m/s. The binder partially fills the voids between the powders. The fraction of void space filled with binder is the saturation and is a key parameter in BJ. The effects of printing parameters such as droplet velocity, size, and spacing on saturation levels are unknown. This study …

Effect Of Superhydrophobic Surface Microstructure On Transient Jet Impingement Cooling, D. Jacob Butterfield, John Morris

Utah Space Grant Consortium

Jet impingement is an effective method of rapid surface cooling, and is highly dependent on surface condition and properties. Here, silicon surfaces are modified by ion-etching different micropatterns (posts or holes) on one side and coated with Teflon to make them superhydrophobic (SH). The other side of the surface has a screen-printed resistance heater. Surfaces are heated to temperatures between 200 to 320 °C, and then impinged on by a pure water jet at room temperature with flow rates ranging from 6 to 18 mL/s. Results show that there is little effect of microstructure, although hole surfaces and shorter microstructures …

Applying Real-World Learning Through Amusement Parks To Help Teach The Upcoming Changes To Utah Core Standard, Phil Lundgreen, Amanda Otterstrom

Utah Space Grant Consortium

To assist educators in satisfying the Science with Engineering Education (SEEd) Standards the Utah State University (USU) Physics Department has developed a curriculum centered around USU Physics Day at Lagoon.

With an upcoming change to Utah's core standards and a shift to more hands-on learning styles, the use of real-world learning offered by amusement park applications is analyzed in its ability to satisfy the Utah State Bureau of Education’s (USBE) SEEd standards. Amusement park learning allows educators a vehicle to capture students’ attention in the classroom by discussing science principles in a fun and exciting manner with a promise of …

Studies Of Oval Tube And Fin Heat Exchangers, Phillip Nielsen

Undergraduate Student Works

Heating Ventilation and air-conditioning (HVAC) is a system which changes the temperature of the surroundings for the purposes of cooling or heating. This system requires energy to maintain a temperature difference from the outside temperature. Optimizing the flow over the evaporator coils is one way to increase the cooling efficiency. This will reduce the power required to have a sustainable system. Optimizing the flow to increase the energy transfer between the fins and the incoming air could result in a greater Coefficient of Performance (COP). This will be achieved by changing the geometry of the tubes for greater interaction with …

Water-Energy-Food Linkages In Shared Smallholder Irrigation Schemes, Ankit Chandra

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Irrigation is a policy focus in Sub-Saharan Africa and is viewed as an important mechanism to improve farmers’ income and livelihoods while reducing the impacts of climate change. Water, energy, and food are linked in intricate ways in irrigated agriculture, and understanding the interplay of these components is crucial for sustainable and profitable crop production. Although studies have been conducted in different parts of the world to understand water and energy use at a field scale under large irrigation systems, little is known about linkages under farmer-managed mechanized irrigated schemes in Sub-Saharan Africa. This study evaluates water-energy-food linkages, engineering and …

Using Infrared Radiometry Thermometer For Irrigation Management Of Dry Edible Beans In Western Nebraska, Isabella Presotto Possignolo

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Proper irrigation management requires farmers to determine the right timing and amount to irrigate. Soil water sensors are one of the most popular sensor-based approach used by farmers to decide when and how much to irrigate. However, installation and retrieval of soil water sensors require excavation of soil and can be challenging. Other than soil water sensors, there are plant-based water stress monitoring technologies that are less soil disturbing such as infrared radiometry thermometer (IRT). Using canopy temperature measured from IRT, researchers can calculate thermal-based indices such as crop water stress index (CWSI) for many crops around the world. Yet …

A History And Status Of Wind Energy Potential In Arkansas, Pre And Post Covid-19, Will Blasingame

Mechanical Engineering Undergraduate Honors Theses

Historically, wind-generated electricity has been the largest renewable energy sources in the United States. Wind-rich regions like Oklahoma and Texas have fueled growth and sold that electricity to electric utilities located in wind-poor states like Arkansas in the form of Power Purchase Agreements. Future technologies such as Vertical Axis Wind Turbines, small wind turbines, and Tesla turbines designed to generate electricity from wind show promise in unlocking more expensive wind resources in regions like Northwest Arkansas by mitigating concerns about low wind speeds and noise. However, more factors than just feasibility influence the growth of wind power. Governmental policies such …

Construction Of A Hyperspectral Imager Using 3d-Printed And Off-The-Shelf Components, Joshua Moorhouse

Mechanical Engineering Undergraduate Honors Theses

The Arkansas Center for Space and Planetary Sciences is working in collaboration with the Mechanical Engineering department to create a relatively cheap and modifiable hyperspectral imager. It is constructed using 3D-printed and off-the-shelf components from Edmund Optics and Amazon. The iteration created in this paper delivers spectrograms in the visible spectrum. The long-term goals of the camera are to create hyperspectral images from these spectrograms and to advance the imager into the infrared and near-infrared spectra. This imager is being developed to be used in the Arkansas Center for Space and Planetary Sciences environmental test chambers to further the scientific …

Sub-/Surface Evaluation Of Industry-Grade Endodontic File Micro-/Nanoscale Structures And Low-Cost, Low-Energy Methods Of Rapidly Annealing And Nitriding Titanium, Nicholas Broadbent

Mechanical Engineering Undergraduate Honors Theses

Because of their unique mechanical properties, shape memory capabilities and biocompatibility, Nickel-titanium alloys are frequently used in the medical industry for a variety of applications including endodontic files. Until now, the performance of industry-standard endodontic files has been characterized by this alloying property and a limited set of macroscale surface structures and features. In this work, High Resolution Transmission Electron Microscopy (HRTEM), Low Resolution Transmission Electron Microscopy (LRTEM), Scanning Electron Microscopy (SEM), and Energy Dispersive X-Ray Spectroscopy (EDX) analyses are conducted at both the surface and sub-surface levels of a wide selection of industry-grade endodontic files currently offered on the …

Exploring The Relationship Between Sustainable Projects And Institutional Isomorphisms: A Project Typology, Rakan Alyamani, Suzanna Long, Mohammad Nurunnabi

Engineering Management and Systems Engineering Faculty Research & Creative Works

With the increase in awareness about the wide range of issues and adverse effects associated with the use of conventional energy sources came an increase in project management research related to sustainability and sustainable development. Part of that research is devoted to the development of sustainable project typologies that classify projects based on a variety of external factors that can significantly impact these projects. This research focuses on developing a sustainable project typology that classifies sustainable projects based on the external institutional influences. The typology explores the influence of the coercive, normative, and mimetic institutional isomorphisms on the expected level …

2020 Directory Of Indiana State, County, City And Town Officials Responsible For Road And Street Work, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Directory

Contact information for agency officials and employees responsible for Indiana’s local road infrastructure.

Ten Questions Concerning Well-Being In The Built Environment, Sergio Altomonte, Joseph Allen, Philomena M. Bluyssen, Gail Brager, Lisa Heschong, Angela Loder, Stefano Schiavon, Jennifer A. Veitch, Lily M. Wang, Pawel Wargocki

Durham School of Architectural Engineering and Construction: Faculty Publications

Well-being in the built environment is a topic that features frequently in building standards and certification schemes, in scholarly articles and in the general press. However, despite this surge in attention, there are still many questions on how to effectively design, measure, and nurture well-being in the built environment. Bringing together experts from academia and the building industry, this paper aims to demonstrate that the promotion of well-being requires a departure from conventional agendas. The ten questions and answers have been arranged to offer a range of perspectives on the principles and strategies that can better sustain the consideration of …

A Machine Learning Approach For Allocating Route Cost To Customers For Transportation And Logistics Services., Alison Davis

Electronic Theses and Dissertations

Advancements in big data enabled management practices inspire logistics companies to study deeper into their transportation operations with a data driven approach. One such question asks: How can a logistics firm identify high-cost customers in their service network? In the presence of rich data on routes involving many customers, this thesis develops a framework to allocate a route cost among customers that the route serves, where each route is associated with multiple route features related to the transportation cost. Cost is allocated using the proportional allocation approach in combination with the random forest method in machine learning. First, this framework …

Effects Of Design Autonomy On The Flow Experience, Antonio F Coriano

Electronic Theses and Dissertations

Most modern workplace settings are laden with operating procedures aimed at standardizing action in the name of efficiency. The cost of this standardization is the autonomy of the operator. Mihaly Csikszentmihalyi stated the problem concisely in his 1975 work Beyond Boredom and Anxiety “… [M]ost of the institutions that take up our time…are organized around the assumption that serious work is grim and unpleasant. Because of this assumption, most of our time is spent doing unpleasant things”. An experiment was created to study and better understand how to redress this harmful situation. Sixteen subjects were given a SolidWorks computer-aided design …

Addition Of Fermentation Experiment To Unit Operations Laboratory, Jeremy T. Rone

Electronic Theses and Dissertations

With the growth of the distillery and brewery industries and the potential jobs created for chemical engineers, it is imperative to equip the chemical engineering graduates from the University of Louisville with knowledge of bioreaction kinetics and experience in performing calculations to solve for concentration profiles and reaction rates. To accomplish this, it is recommended to add a fermentation experiment to the Unit Operations Laboratory II course.

Four groups of students from the Spring 2020 Unit Operations Laboratory II course performed the fermentation experiment. They were able to successfully complete all lab requirements as well as analyze the results and …

Labview Improvements And Equipment Redesign Of Unit Operations Distillation Column, Madalyn S Wead

Electronic Theses and Dissertations

Unit Operations labs are important tools to provide hands-on learning with various chemical processes. The distillation lab experiment allows students to connect equations and definitions from textbooks to the physical processes of distillation as they occur. LabVIEW was the software development tool used to create a program to control the distillation column from startup to shutdown. Improvements were made to both the distillation process equipment and the LabVIEW code to create a more interactive lab experience, enhance students’ conceptual understanding of distillation, and prepare students for their future career as chemical engineers.

Equipment addressed included non-linear valves, malfunctioning temperature and …

Evaluation Of Tracing Techniques In The Rat Spinal Cord Using A Custom Matlab Application., Rachel M. Zalla

Electronic Theses and Dissertations

The objective of this research project is to evaluate the efficiency of traditional chemical tracing compared to dual-viral tracing for labeling long ascending propriospinal neurons (LAPNs) in the uninjured rat spinal cord, and to develop a MATLAB program which will accurately quantify this labeling.

To evaluate chemical tracing, Fluoro-Ruby (FR) was injected at the level of the axon terminals, and the number of ipsilateral labeled cell bodies at lumbar level was quantified. Similarly, two dual-viral systems were evaluated, by either injecting retro-AAV-Cre or HiRet-Lenti-Cre unilaterally in combination with a Cre-dependent adeno-associated virus. The HiRet-Lenti and FR groups labeled significantly greater …

Determination Of Selenite And Selenate In Wet Flue Gas Desulfurization Process Water Through Ic-Icp-Ms And Hg-Icp-Aes, Samuel Anthony Kelty

Electronic Theses and Dissertations

During coal-fired electric power production, coal bound elemental selenium is released into the gas phase and oxidized to selenite and selenate in the wet flue gas desulfurization (WFGD) unit. Selenite and selenate solubilize in the WFGD process water. A process water system at a coal fired power plant contributes to environmental regulation compliance by removing the selenium species from WFGD process water. A selenium speciation method was developed for the purpose of better monitoring the selenium species present in the “treated” process water and to aid the process water system in meeting compliance with the Environmental Protection Agency’s Effluent Limitation …

Determining The Efficacy Of Additive Manufacturing For The Aerospace Spare Parts Supply Chain, Kyle O'Brien

Electronic Theses and Dissertations

This thesis investigates how additive manufacturing (AM) based on-demand part production can supplement or replace the traditional production and inventory in typical aerospace’s spare parts supply chain systems. This study focuses on the operational characteristics of AM and its impacts on the overall logistics of plant-level operations. To capture the microscopic operational aspects of the AM production, a discrete-event simulation based approach was adopted, with key AM operation resources (e.g. AM system, operator) and attributes (e.g. AM manufacturing speed, individual part characteristics and demands) accounted for in the modeling process. In addition, a benchmark warehouse inventory model was also established …

Mathematical Characterization Of A Microfluidic Ultrasound Driven Transfection Device., Chris J. Holton

Electronic Theses and Dissertations

The objective of this thesis is to develop a mathematical model characterizing the behavior of a microfluidic sonoporation device in order to understand how standing wave conditions influence molecular delivery to cells and determine whether the model predicts device performance. A prior model based on an ultrasonic separation cell that uses standing waves to separate particles is adapted for translation to the microfluidic device. This study generates data on acoustic pressure profiles across the cell as well as identifying optimal driving frequencies. This model is validated and the equations and methods for developing this model are translated to the microfluidic …

Embedding Preference Elicitation Within The Search For Dcop Solutions, Yuanming Xiao

McKelvey School of Engineering Graduate Student Theses & Dissertations

The Distributed Constraint Optimization Problem(DCOP)formulation is a powerful tool to model cooperative multi-agent problems, especially when they are sparsely constrained with one another. A key assumption in this model is that all constraints are fully specified or known a priori, which may not hold in applications where constraints encode preferences of human users. In this thesis, we extend the model to Incomplete DCOPs (I-DCOPs), where some constraints can be partially specified. User preferences for these partially-specified constraints can be elicited during the execution of I-DCOP algorithms, but they incur some elicitation costs. Additionally, we propose two parameterized heuristics that can …

Hemodynamic Effects On Aortic Development Due To Outflow Tract Banding, Humza Ismail

McKelvey School of Engineering Graduate Student Theses & Dissertations

Hemodynamic forces drive remodeling of the early cardiac system in embryonic development. Perturbations of normal cardiac blood flow can cause the formation of defects and malformations within the cardiac system. Specifically, changes in hemodynamics can cause the formation of different congenital heart defects. The formation of heart defects has been studied; however, vasculature specific defects caused by changes in blood flow patterns in the early cardiac system have not been studied to the same degree. In this thesis, the effects of hemodynamic changes on arterial development were studied. Outflow tract banding (OTB) was used to cause a local increase in …

Robust Control Of Burst Suppression Amid Physical And Neurological Uncertainty, Stephen Ampleman, Shinung Ching

McKelvey School of Engineering Graduate Student Theses & Dissertations

Burst suppression is a clinical term describing a phenomenon in which the electroencephalogram (EEG) of a sedated patient produces behavior that switches between higher frequency and amplitude bursting to lower frequency and lower amplitude suppression. This phenomenon can be observed during general anesthesia, hypothermia, or in an otherwise induced coma state. In a clinical setting, this phenomenon is typically induced by sedation from a drug such as propofol (2,6-diisopropylphenol). The level of sedation can be quantified by something called the burst suppression ratio (BSR), which is defined as the amount of time that a patient’s EEG is in a suppressed …

Transcriptomic Analysis Of Cytokine-Treated Tissue-Engineered Cartilage As An In Vitro Model Of Osteoarthritis, Jiehan Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Osteoarthritis (OA), as the most common form of arthritis and a leading cause of disability worldwide, currently has no disease-modifying drugs. Inflammation plays an important role in cartilage degeneration in OA, and pro-inflammatory cytokines, IL-1β and TNF-α, have been shown to induce degradative changes along with aberrant gene expression in chondrocytes, the only resident cells in cartilage. The goal of this study was to further understand the transcriptomic regulation of tissue-engineered cartilage in response to inflammatory cytokines using an in vitro miPSC model system. We performed RNA sequencing for the IL-1β or TNF-α treated tissue-engineered cartilage derived from murine iPSCs, …

Design And Validation Of A Dynamic Pressure-Based Loading Device And 3d Strain Tracking Protocol For Ventral Hernia Modeling, Griffin Kivitz

McKelvey School of Engineering Graduate Student Theses & Dissertations

It is estimated that 350,000-500,000 ventral hernia repair surgeries are performed each year in the United States. While the long-term recurrence rate of ventral hernia repairs is not yet known, when tissues are exposed to the trauma of surgery, there is always the chance of recurrence. Commonly used ex vivo testing methods for determining the mechanical properties of the abdominal wall and biomaterials for hernia repair consist primarily of uniaxial and biaxial testing, which are not physiologically relevant loading environments. The need for a testing device that can exert physiologically relevant loads ex vivo to an abdominal wall is crucial …

A Performance Analysis Of Hardware-Assisted Security Technologies, Wenjie Qiu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Intel Software Guard Extensions (SGX) is a novel hardware-assisted security technology introduced by Intel Corporation. The ambition of Intel SGX is to provide an isolated and secure execution environment for user-space applications. Even if the BIOS is compromised, the protected applications remains secure. The isolated execution environment is located in a special memory region called the enclave. Promoting and using a novel technology requires a good understanding of it. This thesis first contains a systematization of knowledge of the hardware-assisted security technologies, trusted computing and the Intel SGX. What is more, to have the best practice of using Intel SGX, …

A Generalized Gaussian Process Likelihood For Psychometric Function Estimation, Jonathan Wenhan Chen

McKelvey School of Engineering Graduate Student Theses & Dissertations

Psychometric functions model the relationship between a physical phenomenon, an independent variable, and a subject’s performance on a cognitive task. The estimation of these psychometric functions is critical for the understanding of perception and cognition as well as for the diagnosis and treatment of many sensory conditions. The ability to estimate psychometric functions of any complexity is necessary to this end. In the following thesis, a generalized likelihood function for psychometric function estimation with Gaussian processes is described and validated. Such a likelihood function is necessary to enable the usage of Gaussian processes for the estimation of non-zero guess and …

Predicting Disease Progression Using Deep Recurrent Neural Networks And Longitudinal Electronic Health Record Data, Seunghwan Kim

McKelvey School of Engineering Graduate Student Theses & Dissertations

Electronic Health Records (EHR) are widely adopted and used throughout healthcare systems and are able to collect and store longitudinal information data that can be used to describe patient phenotypes. From the underlying data structures used in the EHR, discrete data can be extracted and analyzed to improve patient care and outcomes via tasks such as risk stratification and prospective disease management. Temporality in EHR is innately present given the nature of these data, however, and traditional classification models are limited in this context by the cross-sectional nature of training and prediction processes. Finding temporal patterns in EHR is especially …

A New Spatially-Resolved Method To Sample Biofilms From Drinking Water Fountains, Yi Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

A drinking fountain, also called a water fountain, is a facility designed to provide drinking water in public space. It consists of a basin and a spout. The users need to bend down to the stream to collect or drink water. The history of water fountains can be traced back to ancient Rome. Even before potable water was provided to individual homes, water for drinking was already made available to citizens through access to public fountains. Nowadays, drinking water fountains usually exist in public places, like schools, hospitals, and libraries. Many jurisdictions in the United States require drinking fountains to …