Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2020

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 5761 - 5790 of 10651

Full-Text Articles in Engineering

Non-Contact Object Size Acquisition Based On Visual-Inertial Sensor Fusion, Kang Lai, Yingmei Wei, Jiang Jie, Yuxiang Xie May 2020

Non-Contact Object Size Acquisition Based On Visual-Inertial Sensor Fusion, Kang Lai, Yingmei Wei, Jiang Jie, Yuxiang Xie

Journal of System Simulation

Abstract: In consideration of the visual data and the data from the inertial measurement unit (IMU) having the different characteristics, the 6D pose of the visual sensor is recovered from the captured video by using the vision-based 3D reconstruction techniques, the obtained pose information and inertial measurements is fused via the spatial-temporal alignment, and based on the determined scale of the visual 3D reconstruction the non-contact measurement of a scene is performed. The proposed approach achieves a relative measurement error of about 3% in the non-contact object size estimation experiment. As it does not require the additional calibration object …

Go to article

Optimization Design And Locomotion Characteristics Analysis Of Wheeled Traction Robot, Wu Wei, Li Bo, Nana Liu, Guangzhi Ma May 2020

Optimization Design And Locomotion Characteristics Analysis Of Wheeled Traction Robot, Wu Wei, Li Bo, Nana Liu, Guangzhi Ma

Journal of System Simulation

Abstract: To evaluate quantitatively the dynamic locomotion characteristics and obstacle performance of the wheeled traction robot in horizontal well with single pipe diameter, the mechanical model of the crawling module of the wheeled traction robot is established and the structural and size parameters are optimized. The ADAMS model of the current robot is presented, and the Simulink models of three parts of the driving module, supporting mechanism and traction resistance are built. A specified method of the ADAMS/Simulink joint simulation modeling is proposed to analyze the locomotion characteristics and obstacle performance of the wheeled traction robot. The simulation results …

Go to article

Prediction Of Flight Taxi-Out Time In A Busy Airport Based On Lwsvr, Zhiwei Xing, Songyue Jiang, Luo Qian, Luo Xiao May 2020

Prediction Of Flight Taxi-Out Time In A Busy Airport Based On Lwsvr, Zhiwei Xing, Songyue Jiang, Luo Qian, Luo Xiao

Journal of System Simulation

Abstract: Aiming at improving the accuracy of predicting the flight taxi-out time in a busy airport, based on the local regression and weighted support vector regression, a prediction model of the locally weighted support vector regression is proposed. The model uses the K nearest neighbor method to reduce the capacity of the training sample set and build a predictive model for each predicted sample. The bandwidth parameter of the Gaussian weighting function is optimized with the Mahalanobis distance between the forecast sample and training samples, and the weighting coefficients are obtained. Combining the airport departure flight data in simulation analysis, …

Go to article

Two-Stage Dynamic Emergency And Disaster Resistance Operation Strategy For Active Distribution Network, Zhang Wei, Li Quan, Yuqiu Zhou, Yuhang Luo, Peifeng Xi May 2020

Two-Stage Dynamic Emergency And Disaster Resistance Operation Strategy For Active Distribution Network, Zhang Wei, Li Quan, Yuqiu Zhou, Yuhang Luo, Peifeng Xi

Journal of System Simulation

Abstract: The persistence and gradual change of the typhoons and other dynamic disasters, increase the complexity of the fault recovery process. In order to quickly restore the power to the active distribution network, a two-stage dynamic emergency operational strategy is proposed and the corresponding overall optimization model is established. The strategy includes the resource allocation plan, island partition scheme and cooperative scheme of the emergency repair and restoration. In the first stage, the pre-disaster resource allocation plan is made according to the travel time and attribute matching situation between the disaster-stricken areas and the repair resources. In the second stage, …

Go to article

Simulation Research On Effectiveness Of Reward And Punishment Strategy In Open-Pit Mines, Xingxin Nie, Cunrui Bai May 2020

Simulation Research On Effectiveness Of Reward And Punishment Strategy In Open-Pit Mines, Xingxin Nie, Cunrui Bai

Journal of System Simulation

Abstract: Mining safety accidents occur frequently, and one of the main causes is the miners' Intentional Unsafe Behavior (IUB), and therefore implementing the reward and punishment strategy on it is the key coping strategy. In order to study how the reward and punishment strategy acts on the Intentional Unsafe Behavior (IUB) of the miners and how effective the strategy is, based on the Behavioral Economics + IUB Diffusion Theory, combined with the Multi-Agent model to analyze the influencing factors of the miners' IUB, and based on the work situation adaptability function and the unsafe behavior adaptability function, the simulation model …

Go to article

Model And Simulation Of Interactive Dissemination Of Multiple Public Opinion Information Under Government Intervention, Zhiying Wang, Weikang Wang, Chaolong Yue May 2020

Model And Simulation Of Interactive Dissemination Of Multiple Public Opinion Information Under Government Intervention, Zhiying Wang, Weikang Wang, Chaolong Yue

Journal of System Simulation

Abstract: In order to identify the interactive dissemination rules of the multiple public opinion information (POI) in major emergencies and make the intervention decisions more pertinently, an intervention model of interactive dissemination is proposed. The model integrates the characteristics of the unequal competition of multiple POI, expands the existing intervention model of the single POI dissemination, and could analyze the intervention measures from the global perspective of the interactive dissemination. Case analysis and simulation results show that the proposed model could well simulate the evolution of the interactive transmission of the multiple POI. Although the strong POI is more harmful …

Go to article

Influence Of Separator Surface Charge On The Nucleation And Penetration Dynamics Of Metal Electrodes In Concentrated Electrolytes, Sikuang Wang May 2020

Influence Of Separator Surface Charge On The Nucleation And Penetration Dynamics Of Metal Electrodes In Concentrated Electrolytes, Sikuang Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

Go to article

Blood Flow Simulation Of Particle Trapping In Models Of Arterial Bifurcations, Qihang Xu May 2020

Blood Flow Simulation Of Particle Trapping In Models Of Arterial Bifurcations, Qihang Xu

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis describes the particle trapping mechanism in blood flow in different arterial bifurcation models. For validation of CFD calculations, a T-junction model and a Y-junction model are analyzed. In both the models, there is one inlet pipe with two outlet pipes creating a symmetric bifurcation at some angle from the centerline of the inlet pipe. Naiver-Stokes (RANS) equations are solved for single phase laminar flow using the commercial CFD software ANSYS Fluent. After validation, Eulerian simulations are performed by using the Discrete Phase Model (DPM) for two-phase flow with particles injected in different bifurcation models with bifurcation angle of …

Go to article

Development And Application Of Elliptic Blending Lag K-Omega Sst Standard And Wall-Distance-Free Turbulence Model, Wenjie Shang May 2020

Development And Application Of Elliptic Blending Lag K-Omega Sst Standard And Wall-Distance-Free Turbulence Model, Wenjie Shang

McKelvey School of Engineering Graduate Student Theses & Dissertations

In recent decades, Computational Fluid Dynamics (CFD) has become the most widely used technology to understand the fundamental complex fluid dynamics of turbulent flows as well as for modeling of turbulent flows in industrial applications. In industrial applications, the widely used methodology is to solve Reynolds-Average Navier-Stokes Equations (RANS) equations in conjunction with a turbulence model since it strikes a balance between accuracy and computational cost compared to other high fidelity approaches namely the Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS), There are a large number of turbulence models proposed in past five decades, majority of them are …

Go to article

Cfd Evaluation Of Blood Flow In An Improved Blalock-Taussig Shunt Using Patient Specific Geometries, Zhenghao Lin May 2020

Cfd Evaluation Of Blood Flow In An Improved Blalock-Taussig Shunt Using Patient Specific Geometries, Zhenghao Lin

McKelvey School of Engineering Graduate Student Theses & Dissertations

Blalock-Taussig (BT) Shunt is a palliative surgical procedure used during a Norwood surgery on a newborn baby suffering from cyanotic heart defects. The BT Shunt can increase blood flow in patients’ pulmonary artery which can ease the “Blue Baby Syndrome.” Currently used BT Shunts do not produce a balanced flow distribution to the pulmonary arteries (PAs) which can cause high wall shear stress (WSS) and blood flow separation resulting in blood clots. A modified BT Shunt was designed to partially solve this problem. In our previous work [1], the modified BT Shunt was shown by numerical simulations to have the …

Go to article

Cfd Analysis Of A Wind Turbine Airfoil With Flap, Heyou Tan May 2020

Cfd Analysis Of A Wind Turbine Airfoil With Flap, Heyou Tan

McKelvey School of Engineering Graduate Student Theses & Dissertations

The focus of this thesis is to evaluate the aerodynamic performance of NREL S809 airfoil (widely used airfoil for wind turbine blades) with a trailing-edge flap by numerical simulations. In the simulations, the geometry of the flap and the gap between the main element and the flap are varied. The airfoil geometry is created in Design Modeler and structured mesh around the airfoil is generated using meshing software ICEM. Simulations are performed using the Reynolds-Averaged Navier-Stokes (RANS) equations with SST k-ω, Spalart-Allmaras (SA) and Wray-Agarwal (WA) turbulence models at Reynolds number 106 at angles of attack of 0, 5o, 10o, …

Go to article

Self Capacitance Based Wireless Power Transfer For Wearable Electronics: Theory And Implementation, Yarub Omer Alazzawi May 2020

Self Capacitance Based Wireless Power Transfer For Wearable Electronics: Theory And Implementation, Yarub Omer Alazzawi

McKelvey School of Engineering Graduate Student Theses & Dissertations

Wireless power transfer (WPT)

Go to article

The Mechanobiology Of Elbow Contracture: Pathogenesis And Prevention, Chelsey Dunham May 2020

The Mechanobiology Of Elbow Contracture: Pathogenesis And Prevention, Chelsey Dunham

McKelvey School of Engineering Graduate Student Theses & Dissertations

Post-traumatic elbow contracture is a multi-tissue pathology which develops in up to 50% of patients following elbow trauma (e.g., fracture, dislocation). It is unclear which periarticular soft tissues are driving the functional deficit following injury because it is not possible in clinical settings to isolate each soft tissues’ mechanical and biological contributions to elbow contracture. Therefore, an animal model is needed to identify the primary periarticular soft tissue(s) which contribute to contracture. The first animal models of contracture were developed in the knee; however, these studies are not generalizable to the elbow due to anatomical and functional differences between these …

Go to article

Quantitative Fluorescence Imaging For Investigation And Treatment Of Disease, Lemoyne Michael Habimana-Griffin May 2020

Quantitative Fluorescence Imaging For Investigation And Treatment Of Disease, Lemoyne Michael Habimana-Griffin

McKelvey School of Engineering Graduate Student Theses & Dissertations

Molecular imaging is a powerful tool that enables interrogation of basic molecular mechanisms, diagnosis of disease, guidance of therapeutic modalities and monitoring of treatment response. Among the various imaging modalities, optical imaging is particularly suited for preclinical molecular imaging owing to its high sensitivity, lack of exposure to ionizing radiation, low cost, portability and scalability of imaging from the microscopic to macroscopic scale. In particular, fluorescence molecular tomography (FMT) provides quantitative 3D reconstructions of fluorescence distributions down to picomole quantities allowing for whole animal molecular imaging. In this work, FMT is applied to detect disease-specific molecular probes, to monitor and …

Go to article

First-Principles Studies Of Anion Engineering In Functional Ceramics, Steven Timothy Hartman May 2020

First-Principles Studies Of Anion Engineering In Functional Ceramics, Steven Timothy Hartman

McKelvey School of Engineering Graduate Student Theses & Dissertations

Ceramic materials display a wide variety of valuable properties, such as ferroelectricity, superconductivity, and magnetic ordering, due to the partially covalent bonds which connect the cations and anions. While many breakthroughs have been made by mixing multiple cations on a sublattice, the equivalent mixed-anion ceramics have not received nearly as much attention, despite the key role the anion plays in the materials’ properties. There is great potential for functional ceramics design using anion engineering, which aims to tune the materials properties by adding and removing different types of anions in existing classes of ceramic materials. In this dissertation, I present …

Go to article

Scalable Synthesis Of Nanostructured Metal Oxide Films Using Aerosol Chemical Vapor Deposition For Energy Storage Applications, Clayton Kacica May 2020

Scalable Synthesis Of Nanostructured Metal Oxide Films Using Aerosol Chemical Vapor Deposition For Energy Storage Applications, Clayton Kacica

McKelvey School of Engineering Graduate Student Theses & Dissertations

As global energy consumption continues to rapidly increase, the need for new technologies to meet this demand in a sustainable way. Renewable sources such as solar and wind power are being increasingly utilized for electricity generation. However, the intermittent nature of these sources requires large-scale energy storage to reliably provide consistent power. Current grid-scale energy storage usually involves pumped hydroelectric systems, which are limited by location, or flywheel systems, which have limited use in high-power low-energy applications. Electrochemical storage solutions, such as lithium-ion batteries, provide robust energy storage that is not limited by location with a range of power and …

Go to article

Ultrasensitive Biodetection Based On Plasmonically-Active Materials, Jingyi Luan May 2020

Ultrasensitive Biodetection Based On Plasmonically-Active Materials, Jingyi Luan

McKelvey School of Engineering Graduate Student Theses & Dissertations

A broad range of biomarkers continue to emerge as potentially important parameters for early detection of many pathological conditions.1 A disease biomarker (e.g. protein, a fragment of a pro-tein, DNA/RNA, or metabolites) is a ‘molecular signature’ of the physiological state of patient at specific time and is therefore extremely important for early and possibly pre-symptomatic diagno-sis and accurate monitoring of therapeutic intervention. Relevant concentrations of biomarkers related to diseases such as cancer, heart disease, inflammation, and neurological disorders can range in many orders of magnitude from μg/ml levels to sub-fg/ml, some of which possibly still remain unidentified due to the …

Go to article

Tissue Engineering Of Induced Pluripotent Stem Cells For The Development Of Novel Treatment Strategies For Osteoarthritis, Alison Ross May 2020

Tissue Engineering Of Induced Pluripotent Stem Cells For The Development Of Novel Treatment Strategies For Osteoarthritis, Alison Ross

McKelvey School of Engineering Graduate Student Theses & Dissertations

Osteoarthritis (OA) is a debilitating joint disease that is primarily characterized by the degeneration of articular cartilage, the soft connective tissue that covers articulating bone surfaces in diarthrodial joints. While there are a number of risk factors for developing OA, the progression of this disease is mediated in part by pro-inflammatory cytokines from both the synovium and chondrocytes, the resident cells of articular cartilage. These cytokines, specifically interleukin 1 (IL-1) and tumor necrosis factor alpha (TNF-α), induce aberrant expression of catabolic and degradative enzymes and inflammatory cytokines in OA, which promotes degradation of engineered tissues as well as native articular …

Go to article

Ultrafine Particle-Particle And Particle-Ion Interactions In Aerosol Reactors, Girish Sharma May 2020

Ultrafine Particle-Particle And Particle-Ion Interactions In Aerosol Reactors, Girish Sharma

McKelvey School of Engineering Graduate Student Theses & Dissertations

Aerosol science and technology has enabled the material synthesis of ‘good’ nanoparticles, as well as, addressed the problem of air pollution by developing particle capture technologies for ‘bad’ nanoparticles. For material synthesis at industrial scale, flame aerosol reactors are extensively used for large-scale industrial production of ‘good’ nanoparticles. But, there exists a knowledge gap in understanding the early stages (1-10 nm) of particle formation and growth, which is necessary for tailoring the synthesized nanoparticles’ properties. To achieve this goal, measurement tools for the characterization of 1-10 nm particles are quintessential. On the other hand, to capture ‘bad’ particles, existing control …

Go to article

Cognitive Radar Detection In Nonstationary Environments And Target Tracking, Yijian Xiang May 2020

Cognitive Radar Detection In Nonstationary Environments And Target Tracking, Yijian Xiang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Target detection and tracking are the most fundamental and important problems in a wide variety of defense and civilian radar systems. In recent years, to cope with complex environments and stealthy targets, the concept of cognitive radars has been proposed to integrate intelligent modules into conventional radar systems. To achieve better performance, cognitive radars are designed to sense, learn from, and adapt to environments. In this dissertation, we introduce cognitive radars for target detection in nonstationary environments and cognitive radar networks for target tracking.For target detection, many algorithms in the literature assume a stationary environment (clutter). However, in practical scenarios, …

Go to article

Chemistry Of Nanoscale Solids And Organic Matter In Sustainable Water Management Systems, Xuanhao Wu May 2020

Chemistry Of Nanoscale Solids And Organic Matter In Sustainable Water Management Systems, Xuanhao Wu

McKelvey School of Engineering Graduate Student Theses & Dissertations

To alleviate global water scarcity and improve public health, engineered water treatment and management systems have been developed for purifying contaminated water and desalinating brackish or ocean water. These engineered systems provide substantial amounts of potable water and lessen environmental concerns about the release of contaminated water. Wastewater treatment plants (WWTPs), water desalination plants (WDPs), and managed aquifer recharge systems (MARs) are three representative sustainable water management (SWM) systems. But the operation of all three poses two fundamental questions: (1) What is the fate of nanoscale solids (e.g., engineered nanomaterials, naturally occurring nanoparticles) in SWM systems and how will their …

Go to article

Cfd Analysis Of A Wind Turbine Airfoil With Flap, Heyou Tan May 2020

Cfd Analysis Of A Wind Turbine Airfoil With Flap, Heyou Tan

McKelvey School of Engineering Graduate Student Theses & Dissertations

The focus of this thesis is to evaluate the aerodynamic performance of NREL S809 airfoil (widely used airfoil for wind turbine blades) with a trailing-edge flap by numerical simulations. In the simulations, the geometry of the flap and the gap between the main element and the flap are varied. The airfoil geometry is created in Design Modeler and structured mesh around the airfoil is generated using meshing software ICEM. Simulations are performed using the Reynolds-Averaged Navier-Stokes (RANS) equations with SST k-ω, Spalart-Allmaras (SA) and Wray-Agarwal (WA) turbulence models at Reynolds number 106 at angles of attack of 0o …

Go to article

Assessing The Removal Of Heavy Metals Using Emerging And Intensifying Technology Of Emulsion Liquid Membrane With Ionic Liquid, Qusay Al-Obaidi, Jasmine Monroe, Hannah Smith, Zaid Haha, Muthanna H. Al-Dahhan May 2020

Assessing The Removal Of Heavy Metals Using Emerging And Intensifying Technology Of Emulsion Liquid Membrane With Ionic Liquid, Qusay Al-Obaidi, Jasmine Monroe, Hannah Smith, Zaid Haha, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

(Pb(II)) is one of the heavy metals compounds founds in the industrial wastes that needs to be removed from treated wastewater. Emulsion liquid membrane (ELM) has been introduced as an emerging technology for advanced wastewater and water treatment. This emerging technology of treatment can be intensified by strategically adding the hydrophobic ionic liquid of [OMIM][PF6] and ({[BMIM]+ [NTf2]-) ionic liquid to organic membrane phase (O) to facilitate the industrial implementation of ELM with ionic liquid. The results show that with the use of 5% (V/V) [OMIM][PF6] ionic liquid has increased the removal efficiency to 70.37% in reaction …

Go to article

Coal Fracturing Through Liquid Nitrogen Treatment: A Micro-Computed Tomography Study, Hamed Akhondzadeh, Alireza Keshavarz, Faisal Ur Rahman Awan, Ahmed Z. Al-Yaseri, Stefan Iglauer, Maxim Lebedev May 2020

Coal Fracturing Through Liquid Nitrogen Treatment: A Micro-Computed Tomography Study, Hamed Akhondzadeh, Alireza Keshavarz, Faisal Ur Rahman Awan, Ahmed Z. Al-Yaseri, Stefan Iglauer, Maxim Lebedev

Research outputs 2014 to 2021

Low permeability of coal has been a constant obstacle to economic production from coalbed methane reservoirs, and liquid nitrogen (LN2) treatment has been investigated as one approach to address this issue. This study examined LN2 fracturing of a bituminous coal at pore-scale through 3D X-ray micro-computed tomography. For this purpose, a cylindrical sample was immersed into LN2 for 60 min. The micro-CT results clearly showed that the rapid freezing of the coal with LN2 generated fracture planes with large apertures originating from the pre-existing cleats in the rock. This treatment also connected original cleats with …

Go to article

A Novel Approach For Using Silica Nanoparticles In A Proppant Pack To Fixate Coal Fines, Faisal Ur Rahman Awan, Alireza Keshavarz, Hamed Akhondzadeh, Sarmad Al-Anssari, Stefan Iglauer May 2020

A Novel Approach For Using Silica Nanoparticles In A Proppant Pack To Fixate Coal Fines, Faisal Ur Rahman Awan, Alireza Keshavarz, Hamed Akhondzadeh, Sarmad Al-Anssari, Stefan Iglauer

Research outputs 2014 to 2021

Hydraulic fracturing operations in coal seam gas reservoirs are highly prone to release coal fines. Coal fines inevitably cause mechanical pump failure and permeability damage as a result of their hydrophobicity, aggregation in the system and pore-throat blockage. One approach to affix these coal fines at their source, and to retard generation, is to introduce a nanoparticle-treated proppant pack. Thus, this research explores coal fines retention (known as adsorption) in a proppant pack using nanoparticles. In the study, the electrolytic environment, pH, flow rate, temperature and pressure were kept constant, while the variables were concentration of silica nanoparticles (0–0.1 wt%) …

Go to article

Utility Of Vertically Integrated Liquid Water Content For Radar-Rainfall Estimation: Quality Control And Precipitation Type Classification, Bong Chul Seo, Witold F. Krajewski, Youcun Qi May 2020

Utility Of Vertically Integrated Liquid Water Content For Radar-Rainfall Estimation: Quality Control And Precipitation Type Classification, Bong Chul Seo, Witold F. Krajewski, Youcun Qi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study proposes a new estimation method for vertically integrated liquid water content (VIL) using radar reflectivity volume data and temperature sounding retrieved from the numerical weather model analysis. This method addresses uncertainty factors in conventional VIL estimation associated with the effects from the bright band (BB) and radar beam geometry near the radar site. The new VIL is then used for precipitation classification (convective/stratiform) and wind turbine clutter detection in the hope that the estimated VIL indicating vertical activities or development of precipitation systems will account for the two independent subjects together, in opposite ways. The non-precipitation radar echoes …

Go to article

Rapid Restoration Techniques For Software-Defined Networks, Ali Malik, Ruairí De Fréin, Benjamin Aziz May 2020

Rapid Restoration Techniques For Software-Defined Networks, Ali Malik, Ruairí De Fréin, Benjamin Aziz

Articles

There is increasing demand in modern day business applications for communication networks to be robust and reliable due to the complexity and critical nature of such applications. As such, data delivery is expected to be reliable and secure even in the harshest of environments. Software-Defined Networking (SDN) is gaining traction as a promising approach for designing network architectures which are robust and flexible. One reason for this is that separating the data plane from the control plane, increases the controller’s ability to configure the network rapidly. When network failure events occur, the network manager may trade-off the optimality of the …

Go to article

Optimization Of Window Positions For Wind-Driven Natural Ventilation Performance, Nari Yoon, Mary Ann Piette, Jung Min Han, Wentao Wu, Ali Malkawi May 2020

Optimization Of Window Positions For Wind-Driven Natural Ventilation Performance, Nari Yoon, Mary Ann Piette, Jung Min Han, Wentao Wu, Ali Malkawi

Civil and Architectural Engineering Faculty Research

This paper optimizes opening positions on building facades to maximize the natural ventilation’s potential for ventilation and cooling purposes. The paper demonstrates how to apply computational fluid dynamics (CFD) simulation results to architectural design processes, and how the CFD-driven decisions impact ventilation and cooling: (1) background: A CFD helps predict the natural ventilation’s potential, the integration of CFD results into design decision-making has not been actively practiced; (2) methods: Pressure data on building facades were obtained from CFD simulations and mapped into the 3D modeling environment, which were then used to identify optimal positions of two openings of a zone. …

Go to article

Thermal Transport Across The Interface Between Liquid N-Dodecane And Its Own Vapor: A Molecular Dynamics Study, Eric Bird, Jesus Gutierrez Plascencia, Zhi Liang May 2020

Thermal Transport Across The Interface Between Liquid N-Dodecane And Its Own Vapor: A Molecular Dynamics Study, Eric Bird, Jesus Gutierrez Plascencia, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

There Are Two Possible Thermal Transport Mechanisms at Liquid-Gas Interfaces, Namely, Evaporation/condensation (I.e., Heat Transfer by Liquid-Vapor Phase Change at Liquid Surfaces) and Heat Conduction (I.e., Heat Exchange by Collisions between Gas Molecules and Liquid Surfaces). using Molecular Dynamics (MD) Simulations, We Study Thermal Transport Across the Liquid-Vapor Interface of a Model N-Dodecane (C12H26) under Various Driving Force Conditions. in Each MD Simulation, We Restrict the Thermal Energy to Be Transferred Across the Liquid-Vapor Interface by Only One Mechanism. in Spite of the Complex Intramolecular Interactions in N-Dodecane Molecules, Our Modeling Results Indicate that the Schrage Relationships, Which Were Shown …

Go to article

Source Apportionment Of Ozone And Its Health Effects In North China Plain And Southeast U.S., Kaiyu Chen May 2020

Source Apportionment Of Ozone And Its Health Effects In North China Plain And Southeast U.S., Kaiyu Chen

LSU Doctoral Dissertations

Ground-level ozone (O3), as one of six common air pollutants set by National Ambient Air Quality Standards from the U.S. Environmental Protection Agency (EPA), is of great interest due to its health and economical effects. However, O3 contributions from different emission sources are not well understood due to its complicated nonlinear reactions. In this study, O3 source apportionment methods and the applications are firstly reviewed to provide a comprehensive understanding for O3 formations. Application of High-order Decoupled Direct Method (HDDM), brute force method (BFM), O3 source apportionment technology (OSAT) and source-oriented method in O …

Go to article

First Prev Next Last